Related
I'm having problems because I don't think the ROM is flashing correctly. Some apps are missing that say are include with the ROM. Should I Odin back to 2.1 and do the process all over again starting fresh?
Also checked the build number on my phone and it reads "MIUI-unknown" HELP!!
Are you flashing the "Original" MIUI first and then going to the "ReVaMpEd LITE"? If not then ODIN to 2.1 and Flash that first. I could be wrong, but I'm pretty sure the only install directions in the OP are "If you are coming from a MIUI ROM". The "Original" MIUI download link is in the OP of the "ReVaMpEd LITE" thread. Good luck!
Flash the latest MIUI following the cm7 install instructions.
Then flash revamped following the revamped instructions.
FOLLOW THEM EXACTLY.
"Format system" is not factory wipe.
It is located in mounts and storage.
Vibrant+MIUI
Well see I'm already on MIUI Revamped and what I'm having problems with is that every week that a new release comes out I flash following the instructions in the OP but the ROM doesn't flash correctly I guess.
Thanks again guys/gals for your help.
Once you're on it the updates should be pretty easy. Just flash like any other ROM. Good luck!
s13epy said:
Well see I'm already on MIUI Revamped and what I'm having problems with is that every week that a new release comes out I flash following the instructions in the OP but the ROM doesn't flash correctly I guess.
Thanks again guys/gals for your help.
Click to expand...
Click to collapse
feel free to PM me with any questions.
Ive been on revamped for weeks now Ive got it down pretty good.
Odin back to stock.
Root your phone again.
Redownload the rom and delete the old one because it may just be a bad download.
Wipe data/factory reset
Go into recovery and go to mounts and storage.
Format system, data, and cache.
Go back to the main recovery screen and go to "advanced".
Wipe Dalvik cache then go back to the main recovery screen.
Go to install zip from sdcard and reflash the rom.
Flash the kernel of your choice that is compatible with the rom.
Go to advanced and "fix permissions".
Reboot and let it sit for 5 minutes if you have the patience.
Enjoy
Thanks peeps!
Update:
Just re-flashed and everything works now :b
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
i have the exact same problem!
InFa_ReD_1 said:
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
Click to expand...
Click to collapse
try download it again. Sound like a corrupted package
Sent from my GT-I9100 using Tapatalk
rembrandtlnx said:
try download it again. Sound like a corrupted package
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
I tried and got the samething. I also tried a different cm nightly and got the same results.
InFa_ReD_1 said:
I tried and got the samething. I also tried a different cm nightly and got the same results.
Click to expand...
Click to collapse
me2 only stock roms work for me =(
I think there was an issue with the version of CWM used on the CF-roots since it's been modified by CF and because it's an older version.
After you've rooted with CF, try flashing a kernel on there with a newer version of CWM on there (I used codeworkx's kernel from the Cyanogenmod wiki I've attached below with CWM 4.0.1.4).
Once this kernel is on there, then try flashing the CM7 ROM as per this thread. I prefer flashing from recovery myself, but it's your call.
Make sure you flash it twice in a row if you're having issues.
The problem, as stated above is that cf root kernel installs a modified version of CWM that won't work with CM7. Another thing is you have to flash a stock KH3 because KI3 has the new bootloader (unless you flashed KI3 with the old bootloaders). Then, you have to flash the codeworkx kernel so you get a compatible version of CWM. Once in CWM clear data factory reset + clear cache partition + clear dalvik cache (from advanced).
THIS IS IMPORTANT: Flash the ROM from sd card and when finish do not reboot device, just flash it again without wiping anything in between, just 2 consecutives "install from sd card". When this is done you can reboot the system and then enter again to CWM to flash the google apps .zip file that you can download from the CM7 thread.
Hope this helped. When I flashed CM7 i had exactly the same problem and went back to stock cause it was a pain in the ass to flash it fr the first time. But once you get in CM7, everything becomes great and easy, and you can update the nighlies directly from ROM manager without doing any wiping. You just can't use ROM manager when getting to CM7 for the first time.
InFa_ReD_1 said:
Hi there, I need your help and advice please.
Here’s my problem. My phone is the SGS2 running KI3 rooted with CF-root KI3 flashed the secure kernel and then flashed the zImage so I still have root CWM and to get rid of the yellow triangle. I have downloaded CM nightly 88 to my laptop and transferred it to my S2 via usb cable into the download folder.
Here’s where the problem comes into play when I run CF’s CWM and choose reboot into recovery I do a wipe/factory reset / wipe cache and update via sdcard, I pick the cm88 from the download folder and it starts to update and then stops. I reboot and it’s stuck on the Samsung S2 page (boot loop). I then have to get into the recovery and restore my phone to the previous state. Can someone help me I would like to try the CM’s custom rom but don’t know what I’m doing wrong? Thanks.
Click to expand...
Click to collapse
DO NOT use cf-root to install CM7. It's stated by Codeworkx a lot of times in CM Q&A thread. Just flash his kernel to get cwm.
http://forum.xda-developers.com/showthread.php?t=1118693
Now you have the original cwm recovery (from Koush). Boot into recovery, Wipe data, cache, dalvik.
Install CM7 twice in a row without rebooting.
Then flash gapps (without rebooting) http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip.
Now reboot. Wait for a few mins since system has to build dalvik cache. And you're all good to go
Worried about yellow triangle? Get a usb jig.
Siyah kernel 2.0 supports CM7 and miui. So....have fun.....!!
droidphile said:
DO NOT use cf-root to install CM7. It's stated by Codeworkx a lot of times in CM Q&A thread. Just flash his kernel to get cwm.
http://forum.xda-developers.com/showthread.php?t=1118693
Now you have the original cwm recovery (from Koush). Boot into recovery, Wipe data, cache, dalvik.
Install CM7 twice in a row without rebooting.
Then flash gapps (without rebooting) http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip.
Now reboot. Wait for a few mins since system has to build dalvik cache. And you're all good to go
Worried about yellow triangle? Get a usb jig.
Siyah kernel 2.0 supports CM7 and miui. So....have fun.....!!
Click to expand...
Click to collapse
Thanks. Can i flash the orginal CWM over top the CF CWM?
InFa_ReD_1 said:
Thanks. Can i flash the orginal CWM over top the CF CWM?
Click to expand...
Click to collapse
I did it and didn't have any problems, just follow the steps as I posted above.
tomascunill said:
I did it and didn't have any problems, just follow the steps as I posted above.
Click to expand...
Click to collapse
Great thanks for the help it worked I'm now running CM7. One thing though I can make calls but have lost my network connection. Can someone help me with this? Sorry for all the questions I'm new to the whole smartphone business. Thanks.
Ok all fixed up thanks for all your help.
I've downloaded & copied the following file "miuiscotland_I9100-2.3.7.zip" from http://www.galnetmiui.co.uk/content/weekly-downloads to internal SD. Then, flashed it via CWM recovery after Wiping System/Data, Cache partition, Dalvik cache & Battery stats. Now, the Samsung logo appears again & again (BootLoop). I flashed Stock ROM to get the phone running (Recovery wasn't accessible before). How do I get this Galnet MIUI ROM working ?. I'm coming from AndyX ROM v5.0 (ICS) XXLPB with Kernel that came with it..
Need HELP !!! PLZ
Do a factory reset after you've installed GM. If it fails after that, do a 2nd flash without a wipe/reset.
Can't say I've ever had problems installing GM (P.S - GM is kinda taboo on XDA, might want to refer to GM forums in future).
MistahBungle said:
Do a factory reset after you've installed GM. If it fails after that, do a 2nd flash without a wipe/reset.
Can't say I've ever had problems installing GM (P.S - GM is kinda taboo on XDA, might want to refer to GM forums in future).
Click to expand...
Click to collapse
I can't get into CWM recovery after flashing the zip, Just download mode works. Have to flash stock ROM again. Tried Siyah & Speed Mod kernel, doesn't work..
OK. So the process should be:-
1) Factory Reset
2) Install GM
If you end up with a bootloop, normally you'd go into recovery & wipe data/factory reset. And if that failed, you'd try a 2nd install without wipe.
And if that fails, which it obviously has for you, best I can offer is ask on GM forums. Unfortunately they lost their old forums recently (or decided it was too hard to restore them when they renovated their site), so a lot of good advice has been lost.
Someone in one of the few posts there now suggested installing Siyah to get CWRecovery then doing the reset, but you say you've tried that so that's a tough one.
Edit to add - Their old forums might be cached somewhere on the web, depending on how keen you are you might be able to find something that way.
MistahBungle said:
OK. So the process should be:-
1) Factory Reset
2) Install GM
If you end up with a bootloop, normally you'd go into recovery & wipe data/factory reset. And if that failed, you'd try a 2nd install without wipe.
And if that fails, which it obviously has for you, best I can offer is ask on GM forums. Unfortunately they lost their old forums recently (or decided it was too hard to restore them when they renovated their site), so a lot of good advice has been lost.
Someone in one of the few posts there now suggested installing Siyah to get CWRecovery then doing the reset, but you say you've tried that so that's a tough one.
Edit to add - Their old forums might be cached somewhere on the web, depending on how keen you are you might be able to find something that way.
Click to expand...
Click to collapse
Finally it's Working !!!
Flashed the wrong Siyah Kernel Before. Now, after flashing the ROM, switched off the phone & Flashed Siyah kernel 2.6.13 via Odin & Voila.. It boots !!! Thnx!
Heard about the Fluxxi kernel. Is it good in saving Battery Life ???
Glad you got it working You'll find Siyah 2.6.13 works really well with GM. All Siyah builds have.
Yes, I've heard of Fluxxi (I downloaded it), but I haven't tried it. I'm using CM9 at the moment.
No probs
computechnopro said:
Finally it's Working !!!
Flashed the wrong Siyah Kernel Before. Now, after flashing the ROM, switched off the phone & Flashed Siyah kernel 2.6.13 via Odin & Voila.. It boots !!! Thnx!
Heard about the Fluxxi kernel. Is it good in saving Battery Life ???
Click to expand...
Click to collapse
If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
j47d8234554 said:
If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
Click to expand...
Click to collapse
KERNEL not suit rom..
jje
How to update from v 1.0
this is my first post, so yeah im a noob, but just want to ask if i was on Resurrection ics v1.0, how could i update? do i just jump to the most recent update, or is there a certain update i have to flash first before moving on? ive tried to flash the v1.4 but then it would'nt boot, then i restored a backup, tried a couple times even from a fresh stock rom, but still it couldnt boot, what do you think the problem is?
sorry for all the questions
i was on resurrection now i dual boot 1.8 with siyah 3.1.2 with D4 rom( which is amazing btw) try 3.1.2 siyah and see if it works - im avoiding RC's and betas for kernel since the brickings, unless you want the features from rc5
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
xXlordyXx said:
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
Thanks mate!!
yugorisfriwan said:
Thanks mate!!
Click to expand...
Click to collapse
hey i am using this remix rom right from the ver 7.4 now on v1.8.1 what i sugesst u first is 2 install v1.7 then u upgrade it 2 the new v1.8.1 by simply flashing it over v1.7 without any wipes that way u wont have any issues in installation
PS: while installing 1.7 u do a full wipe
ie
wipe data/factory reset
wipe cache part
wipe dalvik cache
then install v1.7
then again wipe cache
wipe dalvik cache
Fix permissions
reboot 2 system
boot takes a while?
So how long do i have to wait for the phone to actually boot after updating? So ive flashed the updates, but when i select reboot now, it then comes to the Galaxy s ii i19100 splash screen. Now i have waited for at least 5 minutes, and nothing happened yet, so just restored my backup in fear of something going wrong am i too inpatient or is that just taking to long? how many minutes do i actually have to wait until its a sure flash fail? thx in advance!
5 minutes is too long, are you sure that you have done a full wipe before installing the rom and then wiped the dalvik cache after. The only time when my phone wouldn't boot was when I had forgotten to do the wipes.
anyway just redo the process and make sure you do everything (don't flash any kernels) and just leave the phone for few more minutes than last time. otherwise try to install another version (1.7 for instance) and see if it boots this time
installation problem
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
rzrdelta said:
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
Click to expand...
Click to collapse
hey which rom ur trying 2 install if its v1.7 of remix then first flash the cm9 kernel dwnld'ng the same from OP (original post in page 1 of remix ics thread) section after that reboot 2 cm9 recovery and then flash 1.7 it will be ok
5 minutes are too long mate. before flashing make sure that the current rom you are on has default CM9 kernel (for version 1-1.8)
After that follow the steps:
1.wipe data/factory reset
2.wipe cache partition
3.install main rom
4.go in advance and wipe dalvik cache and then fix permissions
5.wipe cache partition again and reboot
6.after ur first reboot u can then flash kernels,themes,and mods
enjoy
So... if im still on resurrection version 1.0, would installing the stock cm9 kernel work? .... then i could update?
So any workarounds on accessing the external sd on the computer?!!?
xXlordyXx said:
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
This seems to be a bug with the rom. I got the same problem on 1.4 and on 1.8.1. It will only mount the internal mass storage.
To work around this: Mount it with CWM. Works for me.
hello to all
well i have tested a few ROM´s but the Custom Stock Rom (Codenam: ETERNITY) is one of the best in my opinion.
I have flashed this Rom, and it worked realy fine, my first mistake was that i did not make a backup, and my second mistake was that i have tried to flash some Mod´s.
After flashing a few Mod the Rom does not working correctly, anway i though i reflash it again, but that was not so easy as i thought.
After four time flashing, it did not work, so i thought, i flash the Original Samsung Firmware (i downloaded from Sammobile) so after flashing i rooted my S2 again and the Rom Eternity download it again, and save it in my mobile, in CWM window, i have follow this instructions.
Installation Pocedures:
If you're coming from ICS Roms, Stock Roms, AOKP/AOSP Roms or Custom Roms:
Download the zip file.
Put it in either internal or external SDCard.
Reboot in recovery, wipe data/factory reset, wipe cache partition, wipe dalvik cache.
Go to Mount and storage, format preload.
*If you do not have fromat preload in recovery (Except Philz and Jeboo kernels), Please go to Other Links section on 1st post to get the GS2ROMWipe. Then, run this in recovery*
Install the ROM.
After installation finish, reboot your device.
The first boot will take several minutes.
Please allow 5-10mins to let the media scanner to finish after configuring the Setup Wizard.
Then, open up SuperSU App and update it.
But it did not worked, later i have follow the instructions from the Video, the same problem.
I see only on Screen : " Samsung Brilliantly Stock Custom Stock ROM"
Please allow 5-10mins to let the media scanner to finish after configuring the Setup Wizard.
Click to expand...
Click to collapse
Well i have waited over 20 minutes but nothing happend.
I have ad a pic that you can see the information about my S2, and please sorry for my poor english.
I hope you guys have a idea how can i slove this problem.
Thank you all very much in advance and i hope one of you have a great solution
greets
vijay
?
Sent from the little guy