how activate wifi 3g and gps automatically at startup? i need know the command for enable these services, in case create a aplication
Can't you just leave them switched on?
Sent from my GT-S5830 using XDA App
No need a create a application for that, functionality is already present. Activate your GPS, WIFI and 3G, switch off your phone and switch it on again. They are still active.
Unless you meant something else I didn't understand.
Related
Hi everyone,
My phone's wifi module (also bluetooth) was broken and cannot be used.
It can be turned on, but does not work. and cannot be turned off then.
It reports "error" status.
Unless I restore factory setting or new flash it, no other way to fix this.
Thus, I cannot use mobile data (3g, Edge, HSDPA etc) as internet connection,
because the system would use wifi instead of mobile service if wifi is not off.
Do you know my problem from my discription?
It's some complex...
What I want is any solution from the following two:
1) How to turn off wifi? The module is broken, it reports error when I turn off it from the settings menu.
2) How to enable mobile data thouth wifi is not off?
I guess some operation from the console (command line) is needed to do this.
If I get any one solution above, I can solve my problem.
Thank you very much for reading my post.
Wish you good luck.
bloodeve said:
Hi everyone,
My phone's wifi module (also bluetooth) was broken and cannot be used.
It can be turned on, but does not work. and cannot be turned off then.
It reports "error" status.
Unless I restore factory setting or new flash it, no other way to fix this.
Thus, I cannot use mobile data (3g, Edge, HSDPA etc) as internet connection,
because the system would use wifi instead of mobile service if wifi is not off.
Do you know my problem from my discription?
It's some complex...
What I want is any solution from the following two:
1) How to turn off wifi? The module is broken, it reports error when I turn off it from the settings menu.
2) How to enable mobile data thouth wifi is not off?
I guess some operation from the console (command line) is needed to do this.
If I get any one solution above, I can solve my problem.
Thank you very much for reading my post.
Wish you good luck.
Click to expand...
Click to collapse
even if the wifi is still on you should still be able to use mobile data since the wifi cannot connect to any wifi points.
how did you break it? maybe that is messing up the mobile data part aswel stopping it from connecting
whitest0rm said:
even if the wifi is still on you should still be able to use mobile data since the wifi cannot connect to any wifi points.
how did you break it? maybe that is messing up the mobile data part aswel stopping it from connecting
Click to expand...
Click to collapse
Thanks for you reply.
I almost forgot the post.
The module that controls wifi and bluetooth does not work because of I knocked down a bottle of water that aside the phone.
Now I only have to never enable wifi at any time.
DOes anyone know how to turn off the annoying WiFi reminder? I get tired of it asking me if I want to use WiFi whenever it detects ANY WiFi network! If I wanted to use WiFi, I'd turn it on and connect to it manually.
+1
Sent from my ADR6425LVW using XDA App
Uncheck the second box in wifi settings.
Sent from my ADR6425LVW using XDA App
Nevermind, I found it. Go to Settings/WiFi Settings and uncheck the ""Notify Me" check box. The desription says "When launching apps, notify me when a Wi-Fi is available".
It will still not work if you have WiFi enabled and some network is detected.
I have a Tasker profile set to enable wifi whenever my home access point is within range. The problem is that it doesn't enable wifi, even when the profile activates. When I unlock the phone and open the browser it uses the data connection, and doesn't enable wifi. Has anyone else had this problem with Tasker?
I also run Juice Defender (Ultimate). Could this be causing a problem with Tasker's control of wifi?
Could be, I also had this problem when using J.D. Since I stopped using it had no more probs and battery got better!
Sent from my GT-I9100 using XDA
kezgez said:
Could be, I also had this problem when using J.E.g. Since I stopped using it had no more probs and battery got better!
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
"J.E.g" ???
itm said:
I have a Tasker profile set to enable wifi whenever my home access point is within range. The problem is that it doesn't enable wifi, even when the profile activates. When I unlock the phone and open the browser it uses the data connection, and doesn't enable wifi. Has anyone else had this problem with Tasker?
I also run Juice Defender (Ultimate). Could this be causing a problem with Tasker's control of wifi?
Click to expand...
Click to collapse
Correct me if I'm wrong, but, if you have Tasker turning off Wifi, as in Disabling itself when out of range, than how will it be able to know you are in the vicinity of a hotspot to Enable itself? As in, its off, it can't detect wifi signals, so how can it know you are in the vicinity? You might be better off using a GPS option to enable Wifi.
sieepiestangel said:
Correct me if I'm wrong, but, if you have Tasker turning off Wifi, as in Disabling itself when out of range, than how will it be able to know you are in the vicinity of a hotspot to Enable itself? As in, its off, it can't detect wifi signals, so how can it know you are in the vicinity? You might be better off using a GPS option to enable Wifi.
Click to expand...
Click to collapse
Tasker will peroidically toggle wifi on to check if you are back in range of your access point. You can adjust the checking period within tasker.
Best to set the time to, say, 15 mins (set as 900 secs in the app).
Is there an app or a script I could run to tell my phone not to connect to wifi when 4G is available..? I run with wifi on all the time and have a handful of networks I connect to but would like the phone to automatically disconnect from wifi when 4G is available then reconnect if it is lost. This is useful for me at work because depending on where I am in the building I may have 4G/3G/no data but the wifi is everywhere but it is unsecured so I'd rather not use it if I don't have to.
Sent from my DROID BIONIC using xda premium
just disconnect WiFi from notifications turn on data mobile from the same notification or add toggles widget.
save your internal space for something better.
Is there an app that lets me automatically turn on wifi when I try to connect to the Internet and after a while not using it to disable it? I really need that because I hate toggling wifi and sometimes my sister doesn't disable it and my battery is drained :-[
Tasker
Tasker Wiki
You can create a profile that your wifi starts as soon as the browser is open.
You can also decide when the wifi should be terminated.
I have tried it. Iys very good but I have a problem : When I close Google play or browser or anything wifi closes too. Also if I am inside an app and I press for example share to Facebook I see no connection error and I have to close the app turn on wifi and re-open the app and it's annoying! Is there a sensor in tasker about Internet connection?
Change the wifi advanced settings.
Go to Wi-Fi, then press Menu key then select Advanced Settings. There you can change Keep Wi-Fi on during sleep setting.
Depending on your phone you might even have other interesting options there, such as Wi-Fi timer.
Just set the auto sleep in Wi-Fi settings. This will only disable Wi-Fi when it isn't used
Sent from note, a phone like never before
Think that doesn't work :-\
Try Llama
the same concept of Tasker it is free and good