how can I remove the yellow triangle after an overclock samsung galaxy s2
already tested procedures available on the site but decided not = [
I don't understand, have you actually followed the procedures outlined on the forum or not? You last sentence is as clear as mud.
gawe said:
how can I remove the yellow triangle after an overclock samsung galaxy s2
already tested procedures available on the site but decided not = [
Click to expand...
Click to collapse
if you want to remove the triangle there is already a thread about this(search function),
btw-->no yellow triangle, no overclock.
whats your problem with the triangle you only see it when booting, in my case never.
regards
SupraN0va said:
if you want to remove the triangle there is already a thread about this(search function),
btw-->no yellow triangle, no overclock.
whats your problem with the triangle you only see it when booting, in my case never.
regards
Click to expand...
Click to collapse
If you remove the yellow triangle you can't overclock you say?
The yellow triangle has nothing to do with overclocking. It simply means you've flashed a non-official firmware to your phone. There's plenty of instructions in the development forum how to remove it, if you don't want to shell out the couple of quid on a jig.
I dont know why people are so freaked out about a little yellow triangle you only see for 5 seconds when you turn your phone on.Who cares,its got nothing to do with how your phone works.If your worried about going through all the worries of following instructions to get rid of it here in XDA then buy a jig on e-bay for 2 bucks and your done.Just like johnsens baby shampoo "No More Tears".
Related
Hi
my galaxy s2 is acting weird if i plugin the power from AC charger my phone gets freaking hot and even gives a plastic melting scent... also the battery takes like 24 hours to load to 99% (with the device turned OFF).. so i think i zhould check my warranty
Now the thing is, i flashed it with lite'ning rom (which claims to not give the yellow triangle, however i have got it)
i bought a usb jig and receiving it monday... the question now is: how do i get the phone to stock rom so samsung would think it had never been rooted or flashed?
Many thanks!
Greets,
Marco
One if its branded restore branded firmware two if not branded restore a stock older Samsung rom . Three remove any apps that use root .
You may need to check on boot remove yellow warning triangle and set custom rom counter to zero using recovery jig .
http://forum.xda-developers.com/showthread.php?t=1113928
Dev section has posts on warning triangle stock roms and usb jig .
jje
how many more times this gonna be asked....
Hi,
I've just flashed the speedmod kernel and everything is working properly, but there is one thing that is really bugging me. Whenever the phone is booting up an exclamation mark appears bellow the SGS2 logo. How can I remove this?
many thanks in advance
Rafa
buy a usb jig from ebay. It's because you flashed a custom kernel.
leminhnguyen0703 said:
buy a usb jig from ebay. It's because you flashed a custom kernel.
Click to expand...
Click to collapse
Sorry, I don't think I made my self clear. I know what you mean by buying the jig but I don't have any issues other than the exclamation mark. The phone does boot properly and I can use it perfectly. It's just a visual annoyance to see the exclamation mark every time the phone boots up.
USB jig will remove the yellow triangle, or you can do some fancy flashing trickery as depicted in the cf root thread.
Sent from my GT-I9100 using xda premium
rawfa said:
Sorry, I don't think I made my self clear. I know what you mean by buying the jig but I don't have any issues other than the exclamation mark. The phone does boot properly and I can use it perfectly. It's just a visual annoyance to see the exclamation mark every time the phone boots up.
Click to expand...
Click to collapse
it has no effect on your phone and can be removed by using a jig or if you do a bit of searching there are other methods.
it is simply a marker to point out you are running a custom rom.
Many thanks, guys. I had no idea you could remove the triangle with the JIG.
Need to root... i'm going right??
My Kies page says this about my Samsung galaxy s2:
PDA:KI8 / PHONE:KI2 / CSC:KI1 (HUI)
I've found in the forum this cf root "CF-Root-SGS2_XW_NEE_KI8-v4.3-CWM4.zip"
May i use this cf root on the device using Odin, or it's not good for my device? thanks in advance to anyone who may help me.
maxi1973 said:
Need to root... i'm going right??
My Kies page says this about my Samsung galaxy s2:
PDA:KI8 / PHONE:KI2 / CSC:KI1 (HUI)
I've found in the forum this cf root "CF-Root-SGS2_XW_NEE_KI8-v4.3-CWM4.zip"
May i use this cf root on the device using Odin, or it's not good for my device? thanks in advance to anyone who may help me.
Click to expand...
Click to collapse
Yes mate, you can use that. Just make sure you follow the instructions in the CF Root thread carefully and you won't go wrong.
Also, MAKE SURE that you use task manager and kill any process thats name starts with kies.
Can you kindly the link to CF Root thread ?
I know i will close Kies on PC and starting my phone pressing simultaneously Volume down + power + central buttons then launch Odin
If you give me the link to CF Root thread i will be more sure than now.
Thanks a lot.
Look here
http://forum.xda-developers.com/showthread.php?t=1103399
Ok, i've rooted the phone. Thanks to you
*** edit ***
When i switch on the phone i have a Yello triangle with an exclamation mark , how to resolve it?
From my small amount of know how you can't. It's to show that the device has been modified.
Let me know what ROM you go for! I rooted my device only recently and wondering which ROM to choose , ie Cynagen etc.
Sure i know.
I don't know how to solve, as in the first post, Kies says me i have this:
PDA:KI8 / PHONE:KI2 / CSC:KI1 (HUI)
and i've hacked my phone with this: CF-Root-SGS2_XW_NEE_KI8-v4.3-CWM4
My phone is branded with 3 Italy.
If you have some solution or require further data, ask me, i'll respond you soon
maxi1973 said:
When i switch on the phone i have a Yello triangle with an exclamation mark , how to resolve it?
Click to expand...
Click to collapse
By flashing back a stock kernel.
[REF] Samsung Galaxy S II FAQ (Frequently Asked Questions)
pulser_g2 said:
How can I reset the counter in download mode and remove the yellow warning triangle?
See http://forum.xda-developers.com/showthread.php?t=1068522
Click to expand...
Click to collapse
maxi1973 said:
Ok, i've rooted the phone. Thanks to you
*** edit ***
When i switch on the phone i have a Yello triangle with an exclamation mark , how to resolve it?
Click to expand...
Click to collapse
Re-flash to stock kernel or buy a jig.Good to have if your going to flash,just incase you need to send your phone away.Look-up bin counter and see why.
Hell oeverybody. I have re-flashed with original branded firmware.
After good flashing with odin, my phone continue to show the operator logo and Samsung "S" logo each 20 seconds.
It's about 20 minutes and it don't boot completely.
It's normal and i have to wait or somethink is gone wrong? thanks in advance.
This is called bootloop. There is a very good thread in this forum on how to resolve this. Just search it. Sorry I cannot search for you as I am on mobile.
Edit: This is the address: http://forum.xda-developers.com/showthread.php?t=1108499
maxi1973 said:
Hell oeverybody. I have re-flashed with original branded firmware.
After good flashing with odin, my phone continue to show the operator logo and Samsung "S" logo each 20 seconds.
It's about 20 minutes and it don't boot completely.
It's normal and i have to wait or somethink is gone wrong? thanks in advance.
Click to expand...
Click to collapse
Sent from my GT-I9100 using XDA App
Hello,
I am exchanging my phone but right now there is a giant exclamation mark on it. I read up on several ways to get rid of it but the i read something about B2 causing it to brick your phone or put it in a bootloop. Can anybody point me in the right direction. I do have a Jig but recent posts say it is bad.
jason.hamilton said:
Hello,
I am exchanging my phone but right now there is a giant exclamation mark on it. I read up on several ways to get rid of it but the i read something about B2 causing it to brick your phone or put it in a bootloop. Can anybody point me in the right direction. I do have a Jig but recent posts say it is bad.
Click to expand...
Click to collapse
I just used this thread to clean mine up (not returning, just wanted it cleaned before I flashed it again): http://forum.xda-developers.com/showpost.php?p=18630030&postcount=1
The jig from Mobile Tech Videos came in two days, worked perfectly.
Here's another way:
http://www.jayceooi.com/2011/08/10/...e-on-samsung-galaxy-s2-without-usb-jig-video/
I have the JIG as well. No problems using it.
To "unroot" the device and get rid of the exclamation mark, use Odin and flaah stock kernel. I did that myself and was able to restore original Galaxy S 2 splash screen (and kept root). Remember, in order to use Odin, you must first put the phone in download mode by simultaneously pressing and holding volume up and down amd power buttons. If you need more assistance, feel free to PM me. Good Luck.
Sent from my SAMSUNG-SGH-I777 using XDA Premium App
wrenchmonkey26 said:
To "unroot" the device and get rid of the exclamation mark, use Odin and flaah stock kernel. I did that myself and was able to restore original Galaxy S 2 splash screen (and kept root). Remember, in order to use Odin, you must first put the phone in download mode by simultaneously pressing and holding volume up and down amd power buttons. If you need more assistance, feel free to PM me. Good Luck.
Sent from my SAMSUNG-SGH-I777 using XDA Premium App
Click to expand...
Click to collapse
But if he's going to exchange the phone, recovery mode will still show the flash counter > 0 if they wanted to get nasty. You need the jig to fix that.
alacrify said:
But if he's going to exchange the phone, recovery mode will still show the flash counter > 0 if they wanted to get nasty. You need the jig to fix that.
Click to expand...
Click to collapse
I exchanged couple phone with roots. Just flashed back the stock kernel, even returned with S8 Rom. Noone really pays attention and go to download mode to look for the counter. Just make sure no "!" and has ATT boot up logo. That's all.
Hi guys ok so ive just rooted and put a new rom on my s3 but it keeps rebooting and rebooting after a couple of minutes
On the reboot on the galaxy s3 screen gt19300 screen i now notice theres a little orange like and ! , ???? does anyone know what that is and has it got something to do with the constant crashing?
Thanks
It means that you've flashed a custom ROM/kernel/recovery (via Odin, for example). You can get rid of it with TriangleAway if it bothers you, but it has nothing to do with your problem.
ah right put my mind at ease many thanks for your help i appreciate it
agusdallalba said:
It means that you've flashed a custom ROM/kernel/recovery (via Odin, for example). You can get rid of it with TriangleAway if it bothers you, but it has nothing to do with your problem.
Click to expand...
Click to collapse
This is not true I don't believe. I flashed CF ROOT via Odin and I never got a Triangle at all and the OP did not mention there was a "triangle" at all either, he said there was a little "orange light" and the triangle is not orange anyways... Its yellow.
OP... DO you have a triangle on your screen with an exclamation mark in the center of it OR are you getting just an exclamation mark on the screen and an orange light from your LED? If that is the case then the device may be telling you there is something wrong with it and that could be the reason it continues to crash.
Please be clear about what is happening and lets see if we can help you. I HOPE it IS just the Triangle though for your sake.
Also... What carrier are you with and are you sure your device IS the I9300 version? Is it possible that you have a "carrier branded" device and have tried to flash an I9300 ROM onto it?