i am bricked all i can do is go in down load mode and recovery i need to get a rom that will work with the wifi version so i can restore the tab lease help
sampro.pl or samfirmware.com
just flash via odin..
whilst u are at it..download latest from samfirmware ..theres a thread detailing how to install
and u will be with the latest n greatest
and FYI if you can boot into recovery your not bricked
Sent from my GT-P7510 using xda premium
Wrong section. Yes, odin will fix your problem.
Sent from my SGH-I897 using XDA App
Big-A-Rob said:
and FYI if you can boot into recovery your not bricked
Sent from my GT-P7510 using xda premium
Click to expand...
Click to collapse
This. I think the term "bricked" has been genericized. If your bootloader is unlocked, short of a hardware issue, it seems very difficult to actually brick. Like you have to go out of your way and mess up the bootloader
Post in the right section please.
quentin0 said:
This. I think the term "bricked" has been genericized.
Click to expand...
Click to collapse
Yeah man.
Getting stuck at the Samsung screen or a Bootloop is a "Soft Brick"
A "Hard Brick" is only when nothing does anything. The device doesnt respond to any combination of pressed buttons, screen stays black no matter what.
quentin0 said:
If your bootloader is unlocked, short of a hardware issue, it seems very difficult to actually brick. Like you have to go out of your way and mess up the bootloader
Click to expand...
Click to collapse
I think you have that backwards. Bricking a device with an unlocked bootloader is VERY possible if you start messing with files.
Its a locked bootloader that's nearly impossible to Hard Brick.
P.S. - I think we should replace the term "Brick" with "Paperweight" !
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
Related
i have a question for you guys what i have not
do for to get a cell phone brick ?
i have read many threads and the only way for to get it is by using application rom manager thats right or i can get a brick cell phone in odin software.
what if by a mistake set files in a wrong order in odin software
galaxy ace cf gingerreal v1.0 kph
thanks in advance
WHY would you put the wrong files in ODIN, just read the tutorial and follow it correctly?
And to kinda answer the question, what've read is that ODIN will not brick you phone, you might be able to get a bootloop though (just reflash and it should work fine).
Read the newbie guide(sticky thread) about Rom manager, it should be supported now but be cautious, better to use CWM app instead, or just reboot your phone to CWM (dont be lazy).
People brick their phone when unlocking their phone, there should be a proper solution that works without having to brick you phone.
QNBT said:
WHY would you put the wrong files in ODIN, just read the tutorial and follow it correctly?
And to kinda answer the question, what've read is that ODIN will not brick you phone, you might be able to get a bootloop though (just reflash and it should work fine).
Read the newbie guide(sticky thread) about Rom manager, it should be supported now but be cautious, better to use CWM app instead, or just reboot your phone to CWM (dont be lazy).
People brick their phone when unlocking their phone, there should be a proper solution that works without having to brick you phone.
Click to expand...
Click to collapse
thanks a lot i just want to share this information with some people and solve many questions
squallo37 said:
i have a question for you guys what i have not
do for to get a cell phone brick ?
i have read many threads and the only way for to get it is by using application rom manager thats right or i can get a brick cell phone in odin software.
what if by a mistake set files in a wrong order in odin software
galaxy ace cf gingerreal v1.0 kph
thanks in advance
Click to expand...
Click to collapse
Ace break by rom manager
not know about odin if choose wrong files in wrong option as not tried yet but if i'm not wrong if you choose wrong files md5 sum not gonna correct so it shows error and not let you to flash if you choose wrong option
nims11 said:
Ace break by rom manager
Click to expand...
Click to collapse
I don't know about you , it works fine for me
Forever living in my Galaxy Ace using XDA App
Samsung S5830 brick problem
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
nolex90 said:
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
Click to expand...
Click to collapse
I give up because the stickied post on this section was stuck for nothing .
I told you to practice caution , why didn't you listen ?
Forever living in my Galaxy Ace using XDA App
EmoBoiix3 said:
I give up because the stickied post on this section was stuck for nothing .
I told you to practice caution , why didn't you listen ?
Click to expand...
Click to collapse
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
EmoBoiix3 said:
I don't know about you , it works fine for me
Forever living in my Galaxy Ace using XDA App
Click to expand...
Click to collapse
What it works????
I already beicked my phone in two week after buy cause that crap app
i not think it work on your phone well
may be its now supported or something thats why you use
im happy with cwm app
---------- Post added at 10:56 AM ---------- Previous post was at 10:54 AM ----------
nolex90 said:
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
Click to expand...
Click to collapse
Go to samsung service centre
nolex90 said:
Okay, you know it but i would like to revive my phone.
I have read all of tutorials and articles, but it doesn't work.
I have tried all combinations of buttons, and now i am testing the JIG (301 kohm).
But no result...
Sometimes i can access in the phone by usb, but odin doesn't recognize my phone.
Click to expand...
Click to collapse
Try a different kohm ?
Forever living in my Galaxy Ace using XDA App
nolex90 said:
Hey guys!
I have a big problem.
I have bricked my phone(original firmware, rooted and i was run ROM manager.).
Now i would like to revive it.
How can i use jig? Any solutions!
Regards
Click to expand...
Click to collapse
Only way to get it fixed is by changing the mother board..experienced the same a few months ago..
Sent from my GT-S5830 using Tapatalk
I m also using galaxy ace but nothing seems to me like that, it is working properly for me.
Hello,
I've seen so many people having rooted phone, so I tried it by myself. The problem is after doing all the work using Odin 1.85 the phone is stuck at booting up process with the yellow triangle on (I know where the triangle comes from). I have tried flash the device and it didn't work either. The phone does not allow me to go into the recovery mode. I've tried to install the original ROM but without any changes.
Is there any way I can get it up without the service?
Get the rooted stock from the development forum. follow download directions.
Sent from my SGH-I777 using XDA App
bidyut said:
Get the rooted stock from the development forum. follow download directions.
Click to expand...
Click to collapse
If he couldn't handle rooting, I'm afraid this may go bad, too.
Directions
So that means I have to go to the developers section in the forum, download the ROM and mount it using the Odin ?
Pirateboy said:
So that means I have to go to the developers section in the forum, download the ROM and mount it using the Odin ?
Click to expand...
Click to collapse
It's all spelled out for you there. Read the guides.
Sent from my GT-I9100 using xda premium
Here's a direct link. Read completely. It will tell you exactly what to do:
http://forum.xda-developers.com/showpost.php?p=18065445&postcount=1
My JIG cant remove yellow triangle after flash of LPQ ???
HELP...
Sent from my GT-I9100 using xda premium
Sucks to be you.
Maybe a search will help you. If you did, you'd find two options.
Good luck finding them.
I'll give you a hint, the acronym for one is TA, and the other involves flashing something.
joeherlev said:
My JIG cant remove yellow triangle after flash of LPQ ???
HELP...
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Should be remove
Please.. more information ??
Sent from my GT-I9100 using xda premium
You need to flash the old bootloader (or use CF's app) to remove the triangle.
You won't get much help finding the old bootloader, despite the fact that all the links in the search results are currently dead. Instead, you'll get folks slamming you for asking the question.
Or you can use triangle away in the original development thread as oinkylicious hints above.
The yellow triangle gives your phone magical powers, why would you want to get rid of it?
Sent from my GT-I9100
Kaze105 said:
Or you can use triangle away in the original development thread as oinkylicious hints above.
Click to expand...
Click to collapse
The jig is safer. Even Chainfire himself acknowledges this and recommends it be used instead of his own app.
Personally, I'd rather have a link to the old bootloader too, but nobody's willing to provide one.
donalgodon said:
The jig is safer. Even Chainfire himself acknowledges this and recommends it be used instead of his own app.
Personally, I'd rather have a link to the old bootloader too, but nobody's willing to provide one.
Click to expand...
Click to collapse
Just ask and you will get it. Below is the Old Bootloader to work with USB JIG.
Ok.. Thanks,,. Now I have the old boot loader..
What then?
Flash in ODIN ?
Flash in CWM ?
Will old bootloader make problems in LPQ rom ??
Flash it in the PDA or bootloader section of Odin (makes no difference which). No, shouldn't cause any problems with LPQ.
Flashing bootloader is very dangerous .. it will make your device mess if you fail flashing it
if u thank me then i will thank you ( 이 승 기 )
Ok a friend S3 started acting up I didn't back up so I lost anything
When I tried to put back the original firmware on the phone using Odin for no reason at all will it be installed. It will just stick on Nand writing in the bottom part of the screen and nothing on tp part of the screen that would usually show FIL, PASS etc.
Next thing with some other firmwares the blue loading bar on the phone will go to basically 100% but nothing will happen on the phone
I did get on 2 firmwares, one just kept booting to the Samsung logo then go in a revolving boot sequence with the animation coming up, the other firmware I got on seems like it belonged to some other phone company and after their boot screen comes up and the Samsung's logo come on the screen it will just stay there.
In both cases the phone was left after installation on both screens for hours with no success.
All I want to do is put back on the 4.12 JB T mobile version enter unlock code and give back to my friend
Can I get some assistance please thanks
positiveg said:
Ok a friend S3 started acting up I didn't back up so I lost anything
When I tried to put back the original firmware on the phone using Odin for no reason at all will it be installed. It will just stick on Nand writing in the bottom part of the screen and nothing on tp part of the screen that would usually show FIL, PASS etc.
Next thing with some other firmwares the blue loading bar on the phone will go to basically 100% but nothing will happen on the phone
I did get on 2 firmwares, one just kept booting to the Samsung logo then go in a revolving boot sequence with the animation coming up, the other firmware I got on seems like it belonged to some other phone company and after their boot screen comes up and the Samsung's logo come on the screen it will just stay there.
In both cases the phone was left after installation on both screens for hours with no success.
All I want to do is put back on the 4.12 JB T mobile version enter unlock code and give back to my friend
Can I get some assistance please thanks
Click to expand...
Click to collapse
Take out the battery and post the model number here.
Factory reset to get past the forever spinning Samsung logo. The Odin fails are probably due to incorrect firmware.
GT-I9300
I've been trying to get a firmware for that. And how do i get it to the point of factory reset option?
thanks
G
Aerowinder said:
Take out the battery and post the model number here.
Factory reset to get past the forever spinning Samsung logo. The Odin fails are probably due to incorrect firmware.
Click to expand...
Click to collapse
positiveg said:
GT-I9300
I've been trying to get a firmware for that. And how do i get it to the point of factory reset option?
thanks
G
Click to expand...
Click to collapse
Direct all future questions here: http://forum.xda-developers.com/forumdisplay.php?f=1563
You factory reset by entering recovery and choosing that option.
Thanks got it factory reset and it started
Was some firmware not in English but was able to change language to English so it's good will root and should be on my merry way
thanks again
Sorry if I put thread in wrong area as well
G
:good:
Aerowinder said:
Direct all future questions here: http://forum.xda-developers.com/forumdisplay.php?f=1563
You factory reset by entering recovery and choosing that option.
Click to expand...
Click to collapse
Hi guess what i wa trying to put on a ROM, and for some reason it's messing up. I backed up the phone before I did it and I can't find the back up
So I'm like ok let me try and put back on the firmware, but i downloaded so many firmware looking for one to try I've been unable to find the correct one. So can you point me where I can get a firmware for my galaxy I9300 please
thanks
G
Aerowinder said:
Direct all future questions here: http://forum.xda-developers.com/forumdisplay.php?f=1563
You factory reset by entering recovery and choosing that option.
Click to expand...
Click to collapse
positiveg said:
Hi guess what i wa trying to put on a ROM, and for some reason it's messing up. I backed up the phone before I did it and I can't find the back up
So I'm like ok let me try and put back on the firmware, but i downloaded so many firmware looking for one to try I've been unable to find the correct one. So can you point me where I can get a firmware for my galaxy I9300 please
thanks
G
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=1563
Tired looking thru this place.
Aerowinder said:
http://forum.xda-developers.com/forumdisplay.php?f=1563
Click to expand...
Click to collapse
positiveg said:
Tired looking thru this place.
Click to expand...
Click to collapse
You should stick to that forum before someone doesn't read this thread and answers with a link to our firmware which will brick your device.
It should be in there somewhere. Did you read the stickies? Like aerowinder said, all tour future questions need to be posted in that forum. We know very little about your device here.
You can find all samsung firmware at samsung-updates.com
Sent from my SGH-T999V using Tapatalk 4
I didn't fing anything in that forum
no prob cool
thx
DocHoliday77 said:
You should stick to that forum before someone doesn't read this thread and answers with a link to our firmware which will brick your device.
It should be in there somewhere. Did you read the stickies? Like aerowinder said, all tour future questions need to be posted in that forum. We know very little about your device here.
You can find all samsung firmware at samsung-updates.com
Sent from my SGH-T999V using Tapatalk 4
Click to expand...
Click to collapse
positiveg said:
I didn't fing anything in that forum
no prob cool
thx
Click to expand...
Click to collapse
Well that forum is specifically for your device. Use what you find in this forum and youre destined for a brick.
If you were to ask this question there you would get answers from people who are familiar with the device you have. Ours is very different.
Sent from my SGH-T999V using Tapatalk 4
I'm sorry hey but this was moves to the correct forum
Seems as well that Odin 3.4/3.6/3.6. All seem to have a problem I installed a firmware using 1.85 and it went on find.
Ok thanks got you, have a good one. so the devices are soo similar still very different?
DocHoliday77 said:
Well that forum is specifically for your device. Use what you find in this forum and youre destined for a brick.
If you were to ask this question there you would get answers from people who are familiar with the device you have. Ours is very different.
Sent from my SGH-T999V using Tapatalk 4
Click to expand...
Click to collapse
positiveg said:
Ok thanks got you, have a good one. so the devices are soo similar still very different?
Click to expand...
Click to collapse
Hardware wise, they aren't similar at all.
positiveg said:
GT-I9300
I've been trying to get a firmware for that. And how do i get it to the point of factory reset option?
thanks
G
Click to expand...
Click to collapse
According to this you are working on an International i9300 S3 I will move your thread to the correct forum as to not confuse other users here, or have someone here give you the wrong links to software that may brick your device.
Thread moved.
The op can post what the problem is here please if its an I9300 .
I9300 Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
I was trying to update the recovery on my 5.0 using ODIN and something went wrong. I am guessing that I am bricked to some extent, what is the process of bringing it back to life?
caseyatbt said:
I was trying to update the recovery on my 5.0 using ODIN and something went wrong. I am guessing that I am bricked to some extent, what is the process of bringing it back to life?
Click to expand...
Click to collapse
Here's an excellent place to start:
http://forum.xda-developers.com/showthread.php?t=2001170
And another excellent post:
http://forum.xda-developers.com/showthread.php?t=1496360
For devices that are hard bricked:
http://forum.xda-developers.com/showthread.php?t=1386669
Cool, just flashed a kernal and back in business. Thanks for the link. I didn't look in the General section.
Flash rjs kernel cwm 14
Sent from my YP-G70 using XDA Free mobile app
beeewell said:
Here's an excellent place to start:
http://forum.xda-developers.com/showthread.php?t=2001170
And another excellent post:
http://forum.xda-developers.com/showthread.php?t=1496360
For devices that are hard bricked:
http://forum.xda-developers.com/showthread.php?t=1386669
Click to expand...
Click to collapse
His device was soft bricked, but yeah.