Related
Dear All
I'm a new android user, I just get a new A50 from Australia and try to root it. It's successful with z4root and I try to install Thai font to system. Unfortuantely I did wrong by deleting font folder in the system, therefore I can't run the system again. When I power on, it still have only garmin asus android logo and can't use it again. Does anyone please let me know how to restore or resolve this problem, or I have to throw it away? Thank you in advance.
Cheers!
Winext
Android 1.6 or the new 2.1 Eclair update?
It's a new Eclair 2.1 update, is there any solution?
Connect it to your computer via USB cable.
Using ADB, try this:
ADB REBOOT RECOVERY.
If it works, a yellow triangle appears with the green android guy.
Hit the HOME button. A menu appears. Use volume up/down to move through the options. Tap power to select it I beleive.
Reset/wipe to factory is one of the options.
If you need it, ADB is found in the Android SDK.
If that doesn't work, try calling in to Garmin for support.
Sent from my Garminfone using XDA App
Dear Spazmogen
Thank you for your suggestion, but I'm really new with ANDROID.
I downloaded ANDROID SDK and try to install but it dodn't work.
I use Win 7 64bit, do I need another software to run this command.
If possible, please let me know some previous post that already teach for beginner.
Thank you in advance.
Cheers!
Winext
ADB is a command line tool. But you will have to get Android SDK installed on the computer 1st.
Read the instructions for installing the SDK here: http://developer.android.com/sdk/index.html
ADB commands: HERE.
Interesting. I got into the recovery screen using the Quick Boot app,used the home button to show the menu. The arrows and volume buttons move, but can't actually do anything. Probably related to missing files that are reported in the data/cache/recovery folder.
https://www.garminasus.com/en_US/support/eclair/006-B1130-00.update
official 2.1 update came out today for USA GARMINFONES. Not the A50 Nuvifones elsewhere in the world...
Is the update different from the leaked one?
Sent from my Garminfone using XDA App
I am waiting for an answer to that question myself. I have no plans to change from the leaked version Garmin posted in mid-November.
Sent from my Garminfone using XDA App
Apparently someone did a bit comparison and said they matched. Plus, I tried and it told me it was the same version. On the plus side, I messed up my recovery partition and recovered it using the backups I made of each partition after I loaded 2.1 (dump_image). I made img backups and tar backups of all the files in 1.6 (I am anal about backing up). Good thing because 2.1 doesn't come with flash_image.
I can get into fastboot and the driver loads and stuff, but I get no devices listed when I do fastboot devices command. Next stop is Ubuntu
I know it works,just need to know how to get to it. Btw,I tried both the Garmin fastboot and adb drivers as well as adding the device hardware id's into the android drivers and neither worked.
I also need to find out if there is a similar enough kernel that I can use to get a fully functional recovery mode. I did find out that you can use adb just fine in the stock one and it loads a serial driver as well.
any possible way I could get that backup you made? I apparently didnt save my backup to the pc. And currrently I messed up permissions on my Garmin trying to get recovery working. I cant run the update or anything.
I've just stumbled across this forum post from google, I too am need of fixing my phone. All that is faulty is that the recovery mode has been overwritten with an incorrect one. Is it possible to extract the recovery image and reflash it from the optus supplied Android 2.1 006-B1130-00.update file?
Or is there a way of just getting say Rom Manager to work some magic for me?
Yes, it is possible... would be easier if someone could just use dump_image on a phone that has a working recovery mode and root access. I can provide the dump app and instructions.
Where can I get the Optus update, and are you positive recovery works on it? Does it also have working fastboot?
And to the other poster, which partition do you need? Btw, Rom manager has a permission fix mode. I can get you a tar file if it is the system partition or your choice of img or tar for the others.
And to everyone, after updating to 2.1, do a master clear because a lot of 1.6 apps are left over... duplicates.
Also, odexing all apps speeds it up a lot, with the caveat that you have to re-run the odex.sh file (found somewhere here and modified by me to be more thorough) after every app update or you will get force closes.
Oh I just reflashed the update again, and I got my recover menu back!
I'm not sure if i need any help anymore, but thanks for your offer of help merwin.
By working, do you mean that you can get to it with a hardware key combination and can actually select items?
first of all ,i 'm sorry for my english .my a50 is dead too.i also delet font folder and i use the adb command 'adb reboot recovery'.but the error is device not found. and my pohone can not boot .it stop at the android guy . how can i setup the device..Q.......Q......help me ..pls
garmin-asus a50
i have this garmin asus a50 was running 2.1 after installing a few apps.
tried to reboot and now is stuck on android screen.
tried hard reset stuck on android screen with wipe userdata on top
please help!
garmin-asus a50 dead
yoyoset
i think i have the same problem please let me know of any progress
thank you
Hey everybody
LETS WORK TOGETHER TO CREATE THE FIRST CUSTOM ROM FOR THE DELL VENUE We need a good rooting software and a decrypted UPDATE.pkg. Everybody knows that the Dell Venue uses FASTBOOT like the Dell Streak so the procedures should be the same.
Good rooting software: SuperOneClickv1.5.4-ShortFuse
Dell hasnt released update.pkg for Venue. If someone knows how to pull the file from the phone then we can make custom rom.
Also, Venue doesn't have the fastboot mode like the one in Streak.
Sent from my Dell Venue using XDA App
Yes the Venue uses fastboot
fastboot
fastboot enter...
Venue's power supply on when holding the Volume down key.
Enter Fastboot
I found out you can get to the fastboot menu by:
Holding both up & down volume while turning on the phone.
Release power like normal while continuing to hold both volume buttons until you reach fastboot.
Now all we need is a custom rom to install via update.zip...
And also, u can hold the down volume while connecting the phone to usb charger. You'll see a custom recovery from Dell with a LOT OF OPTIONS like earase partitions, battery settings and other that i can remember
I will post some pictures soon
can someone help to create the custom rom of dell venue?
custom rom and kernel please
a custom rom and a custom kernel would be awesome. Dell's official 2.2 rom is too stinkin slow. For a phone with this kind of specs, it is way slower than similar spec'd phones
I tried to get the source code from Dell.
In Venue-HOW-TO-BUILD.txt, it's showing that part of venue are built from android donut. And I can't find "source tree of android froyo from Qualcomm"
vugiang said:
Good rooting software: SuperOneClickv1.5.4-ShortFuse
Click to expand...
Click to collapse
Good rooting software till now is Gingerbreak.apk
worked for my dell streak + dell venue + xperia x10
it works without ****ing up anything
just search for ginger break in this site and install , then click root ............wait for sometym and ur phone will reboot ....................and u r done. tym takes - 4-5 minutes without fail
I tried Gingerbreak 1.20 apk. didn't root my venue (tmobile froyo 2.2.2). But I did not leave it running for 4+ minutes. Will try again tonight.
Agent5150 said:
I tried Gingerbreak 1.20 apk. didn't root my venue (tmobile froyo 2.2.2). But I did not leave it running for 4+ minutes. Will try again tonight.
Click to expand...
Click to collapse
It must root,
As it was successfull for me
Just install
-click ROOT a window will open
-wait for mints , say 1 or may b 2 (i didnt count tym actually) . And ur devic will reboot , try waitng if it takes tym but hopfully it will nt,
Pls do confirm if u already rooted
Sent from my Dell Streak using XDA App
Nope, left gingerbreak running for 30 min. just sits and spins.. nothing doing on 2.2.2 dell rom. I am talking about 2.2.2 on Dell venue (not Streak, gingerbreak works fine on Streak).
worked on my venue,glad to get rid bloatware
Sent from my SPH-P100 using XDA App
Superoneclick 1.54 worked like a charm, much easier to root the Venue than the Streak 5, IMO. (AT&T)
Now I just need Gingerbread on the phone and ill be even happier. Love the device tho, I have been very impressed with Dell running Android, much more than I have been with HTC.
Wish my Streak 5 extended battery worked on the Venue, that upset me. I have this $50 Dell rebate card that came with the Venue, I dont know what to get.
Unlocking and Rooting Dell Venue 7, 8, and 10
Dell has released instructions and files to unlock bootloader and root the device. I have linked the parent directory, you will also need "Intel Flash Tools Lite" (it says OS required in Ubuntu but you can find the Windows version online as well - I use Win10 and it worked fine). Follow the instructions in the .pdf provided from Dell and when it says to run the commands in the Ubuntu terminal just use elevated command prompt in windows, the adb commands are the same.
**IMPORTANT - Device has to be FULLY charged or Flash Tools will show it as not detected during flash. You have to follow step 1 and 2 of the process flashing the opensource firmware then use adb to sideload the OSS .zip. Obviously ONLY download from official links I have provided below. The first one is an official linked from Intel on this page: (I am new so it won't let me link, but just add https: in front of links)
//software.intel.com/en-us/installing-firmware-with-flash-tool-windows
//01.org/android-ia/downloads/intel-platform-flash-tool-lite
//opensource.dell.com/releases/
still waiting for custom rom on dell venue 8 :/
I received one of these the other day and began to tinker. Rooted with Gingerbreak v1.2, installed the full market, and busybox. All with no problems. I would like to change a few other things but with out having CWM to make a backup, I am a little cautious. When I go into the FWUpdate, it tells me there is an update. I tracked down the file on the web, downloaded it ( all 300 megs worth) and have been looking at it. If anyone would be interested it this file for development purposes I could upload it or provide the link of where to get it from.
Ive downloaded it. So far it fixes bugs. But you have to use root explorer to clear the unwanted apps
Sent from my LG-P500 using XDA App
Well I started dissecting the update. Found it is still 2.3.1, it uses fuse to manage the file system, and has an updated recovery. The file system layouts are a little different than what I normally see on my Incredible. It has separate mbr, uboot, kernel, env, system, ramdisk, ect... I would really like to change the density but with out having adb working or a custom recovery, if I use a value that is not compatible I am in a world of hurt.
Yeah its still the same. For nw i currently waiting for cm7 for viewpad 7e. Btw the viewpad 7e isnt big and limited people.
Sent from my LG-P500 using XDA App
Granted it is not a XOOM or a Galaxy Tab, but I don't think it should be it should be overlooked for development. I am not much of a programmer, but I do like to try. If a current developer could give some guidance as to how to build a custom recovery that would be beneficial.
Andy try power off the vp7e and then hold the power, volume
Up and down button. It resets my tablet.
Sent from my LG-P500 using XDA App
Yep, Power on with volume down boots into bootloader with a boot flag of 1 and volume up while power on also boots into recovery but with a boot flag of 2. Not sure what the difference is with the boot flag. I know that in both modes with usb pluged in, it is seen by my windows computer as a Viewpad 7e. Which is the same thing that is shown when I have usb debugging turned on with usb pluged in after a normal boot. I looked into the adb thing and I cant get adb to see it, even on my linux box. Kinda wierd the vendor id is 0bb0, Concord Camera Corp.
For now we have to wait for a custom recov and cm7 for our tablets
Sent from my LG-P500 using XDA App
My viewpad 7e keeps rebooting after rooting - please help
Hi Andyav.... I saw your post that you have downloaded the firmware for viewpad 7e. It may be my best chance to recover my viewpad 7e and have it working again.
My viewpad 7e started a reboot-loop after I rooted it with gingerbreak and ran the google market installation.
I need to restore the original firmware but I can't find it anywhere.
Please send me a link and allow me to download your copy of the firmware for the 7e. I would really appreciate if you could do this for me.
My email address is [email protected]
Hoping you would reply soon...
thanks,
Ariel(Reapjack)
Could you also sned me a link to the firmware. I received one yesterday, but its downloading the firmware at about 5% an hour for some reason! If I used this copy for firmware and put it on a micro sd and update the viewpad from that? Thanks in advance
My email is [email protected]
I pm the link to you for the update.
Reapjack - Not sure how you will install update. I would try to copy file to root of sd card and boot into recovery to see if it will install that way. If not rename it to update.zip to see if the recovery will work that way. Let us know know how it turns out and which way worked. Thanks.
I'm trying to download F70 VSAM_S_W_C_11282011.zip, but I have the same problem, the very slow download...
will you send me the firmware too?.
Thanks !
[email protected]
Update file ran but tablet keeps on rebooting..
Hi Andyav.. Thank you for the update file. The file ran as expected by putting it in the sdcard's root. The update went fine but my tablet still keeps on rebooting.
It seems that this update is overwriting only some files but not all. Maybe that part of the OS that was rooted earlier is not being overwritten. Would you know if there is a full update that will overwrite everyting?
Thank you again.... I appreciate the help so much!
Thanks Andyav !!!
I really appreciate your soon PM with the link.
I have problems with the spanish languaje, hope that this update fixt it.
I'll post the results.
Thanks again !
PAD
Reapjack - How did you apply the update. Through the recovery or through a normal boot? I know inside that update there is an updater-script for doing a full update, includes mbr, kernel, system...etc. I am not sure how to trigger it though. Maybe that’s what the boot flag is for in the recovery.
I did finally take the risk and adjust my density in the build.prop file. Tried a few different settings. Default is 180. I am currently running at 160 but did try 200 and 220. Looks good but the display is still not as clear as my phone (HTC Incredible running MIUI). I know the screens are not really comparable, but Viewsonic has been designing and building monitors for years and this is the best screen they could put in this tablet.
Also did some digging around on the internet about the host cable. Found a few here and there but I can be rather impatient at times, so I decided to make my own. Chopped off the end of an old Motorola house charger, shaved off al the plastic around the end, de-soldered the wires and one resistor from the small board. Then dismantled a usb cable I had made for my original Xbox, soldered the cable to the mini usb end, shorted pin 4 to pin 5, plugged her in with a keyboard attached and it worked, first try. I did notice that the host mode is not real reliable. After the initial test I could not get it recognize keyboard again. Checked all solder points, tested from usb female end to mini usb, all tested good. Several reboots with cable plugged in, nothing changed. I knows to go into host mode, I can see it switching when i run dmesg. But it just doesn't know what it attached to cable.
Andyav, i tot the lastest update is 20111125? I dont have the 28.... version for ota update.
Sent from my GT-I9000 using XDA App
hey andyav , try this website : www.viewsonic.com.au/kbase/article.php?id=492
Sent from my GT-I9000 using XDA App
After 12 hours of downloading, tried to upgrade from the internal application but after reboot, the process was canceled because it didn't find the .zip file on the sdcard. (error mounting sdcard)
Surely the problem was that the sdcard was not properly formatted.
Now,
the Recovery system shows 1.9 version and bootflag is only "1", regardless of the volume button I use to start (+ or -)
I formated the sdcard and tried to do a manual upgrade with the file downloaded directly from viewsonic: F70 VSAM_S_W_C_11282011.zip, but no luck, the recovery reported bad file.
Any help?
hellodzulz, will you tell me where did you dwonload the 20111125 update to try it
Thanks !
PAD
Over the last few days I have been trying to get the ready for custom roms when they become available. Digging around on the internet trying to find as much information as I could about the hardware. While digging around for devices that have custom roms and use the same processor line, I found some rather interesting information about the Galaxy S Unbrickable Mod. Basically it is a hardware mod that causes the phone to enter a Samsung download mode for flashing. Well I took the plunge and opened the case, found and verified the processor, broke out my multi-meter and went probing. Was able to locate the hardware that controls the boot sequence, preformed the mod and plugged it in to my linux box. Ran the Unbrickable Mod Mode Detector and it recognized it. HOLLY CRAP. I have to do a bit more research on utilizing this mod to our benefit but I an rather excited that this mod will work for us.
I've downloaded the file again and everything went ok.
May be the first download file was corrupted due to the slow transfer.
The errors that occurred when selecting Spanish language were resolved.
Anyway, there is an issue with bluetooth.
I can send files to other devices, but I cant receive with the VP7e, when I try to send some file, the VP7e don't show the popup window asking permission to receive file.
Is like it's denied by default.
Does somebody successfully tried to send/receive files with bluetooth ?
Thanks !
PAD
hi i have attempted to root my archos 80 g9 and it worked but after installing sde i got stuck in boot loop then mistakenly i removed the sde menu and now the devices will obly go to boot menu and no matter what other options i select it does not load android please help im affraid i may have killed my device and adb no longer recognises the device, please help im extremely worried as even if i select update firmwae through device menu it sails update failed.
please please please help
soulclaimed said:
hi i have attempted to root my archos 80 g9 and it worked but after installing sde i got stuck in boot loop then mistakenly i removed the sde menu and now the devices will obly go to boot menu and no matter what other options i select it does not load android please help im affraid i may have killed my device and adb no longer recognises the device, please help im extremely worried as even if i select update firmwae through device menu it sails update failed.
please please please help
Click to expand...
Click to collapse
Don't worry, it's not killed.
If your device says update failed, usually it's because aos file is corrupted or file name is invalid. First, make sure that the filename is correct, browsers often modify name when you download same file multiple times.
And if it's correct then try to download it again from Archos website.
If nothing works, choose reformat device then try again.
If the failed is error 101, make sure you have the newest version of the update
Sent from my ARCHOS 80G9 using xda premium
ok so i have managed to get the aos file back on to my tablet so now not so broke but still want to root, the tutorial says i should put the firmware ext and other files on to archos via adb or copy and paste but when i get my tab to show as removable drive its only something like 200mb in size and the ext4 and other files for rooted firmware are over 500mb total...
soulclaimed said:
ok so i have managed to get the aos file back on to my tablet so now not so broke but still want to root, the tutorial says i should put the firmware ext and other files on to archos via adb or copy and paste but when i get my tab to show as removable drive its only something like 200mb in size and the ext4 and other files for rooted firmware are over 500mb total...
Click to expand...
Click to collapse
You boot the tablet as usual and run Paul's root. Then you enable sde. After this, copy the file to the internal storage of the device using your computer. Boot into recovery. Go to development > install ramdisk. Another drive will appear on your PC. Copy the other 2 files onto it and press the power button on the device. Wait and then reboot
Sent from my ARCHOS 80G9 using xda premium
managed to complete root process however superuser does not allow anything also im following the tutorial for installing firmware with root but after installing th zlimage and initramfs however how do i install the ext4 i have no folder called data
soulclaimed said:
managed to complete root process however superuser does not allow anything also im following the tutorial for installing firmware with root but after installing th zlimage and initramfs however how do i install the ext4 i have no folder called data
Click to expand...
Click to collapse
Ext4 isn't installed, it just sits there being mounted
About root: Are you booted into sde?
If not, boot into recovery and select Boot Developer Edition
Sent from my ARCHOS 80G9 using xda premium
very kind of you to advise, its all working again now thanks
Archos have 2 different update for archos 5. One for archose it 5 and 7, and the other is for archos internet tablet 5 and 48, make sure you use the correct one. Go to archos page and download the other one.
HELP MY acrhos 80 g9 wont boot past recovery
i have the exact same problem i rooted my archos 80 g9 followed each step slowly and exactly but get the z image and other file for the honeycomb versoin so then i just got the ics version on it and flashed the kernal and everything so it ended up just getting stuck in a loading screen i thought it just took a while because i rooted it no it stayed over night 12 hours and still loading so i went into recovery and tried to reformat it but it wont show up on my computer so i cant put any files on it i also accidentally removed the sde so now when i turn it on and off it goes straight to boot please help me im screwed can you please answer here or send me an email [email protected] it is super urgent its been stuck for a few days now
kingcyrus9 said:
i have the exact same problem i rooted my archos 80 g9 followed each step slowly and exactly but get the z image and other file for the honeycomb versoin so then i just got the ics version on it and flashed the kernal and everything so it ended up just getting stuck in a loading screen i thought it just took a while because i rooted it no it stayed over night 12 hours and still loading so i went into recovery and tried to reformat it but it wont show up on my computer so i cant put any files on it i also accidentally removed the sde so now when i turn it on and off it goes straight to boot please help me im screwed can you please answer here or send me an email [email protected] it is super urgent its been stuck for a few days now
Click to expand...
Click to collapse
please follow the steps on my guide or look anywhere else on this forum. the problem has come up many times http://forum.xda-developers.com/showthread.php?t=1542058
Stuck in a boot loop
Hi guys and gals, 101g9 250gb is stuck in a boot loop....
SO FAR...
I had sever problems with crashing on the archos FW.
So I switched to a xda dev version (can't remember which one).
It worked well for 2 weeks, then just started a reboot loop.
I tried in this order:
Restarting in safe (button) mode 545434times
uninstalling the dev and reinstalling the archos FW
formatting android
formatting every other thing
Reinstalling the SDE menu - then trying a xdadev
It's still stuck in a boot loop.
Any help would be great.....
thanks
well, i hope this will pass cause I am a noob here..
As an owner of this pretty much cheap and quite alright device I had hard time finding proper root method but in the end it was found..
Mine was already on 4.2.1 and the rest is as usual 1,5ghz dual core, mali 400 graphics, and apparently cortex a7 not a9 as on the box.. but who cares, right!?
so i got to the file (its actually based on crystal_root method from xda but some smart guy somewhere just made it work for 4.2 generic tablet ) I apologize if this si mentioned somewhere else, and I couldn't reply to crystal root board cause i am a noob, but I am sure some people will find this useful, that's all.
ok...you can chat here with me untill i got those 10 posts to upload link, you can google "Aigo M80E - JB 4.2.1 - help with rooting (killing cell standby)" or you can be a good soul and my first mate here and paste link
Cheers!
Hello,
I have the same model, and been looking for root.
Thanks.
MS!
prestigio 8.0 hd root (JB 4.2.1)
copy this file to sd card go to recovery and install
New firmware
New firmware available for our tablet:
PMP5588C_20140102_v1.0.42:
http://de05.dl.prestigio.com/Service_Files/TabletPC/PMP5588C/PMP5588C_20140102_v1.0.42.zip
1. New preinstalled applications
2. User agent profile for Android browser updated
3. APN/SPN files updated
4. Skype issue fixed
5. Video player issue fixed
6. Chrome browser bugs fixed
7. Sound Recorder issue fixed
8. Wi-Fi bugs fixed
9. Gallery issue fixed
10. System stability and speed improved
11. Other minor issues fixed
verification
Hello friends, i have problem with verification of modified or created own firmware on my PMP5588c duo, during instaling of this update from recovery, boot loader delet this instalation and displayes " validating error" Is possible break this validation? modified or choose other bootloader? sorry for multiple question. thanks for help David
Prestigio 5588c Rooting Issue
Hello to all.
I have a Prestigio 5588c and I had recently updated it to the latest firmware. I wanted to root this device, but it seems that the new update is not allowing the utoo-root-signed.zip to root it. It keeps failing. I was wondering if there is someone out there that is in the process of renewing the file so that it works on the most recent update from Prestigio.
Thank you in advance for your time and your great work regarding all things that are Android
Az
Root for PMP5588c_Duo
AzahTabor said:
Hello to all.
I have a Prestigio 5588c and I had recently updated it to the latest firmware. I wanted to root this device, but it seems that the new update is not allowing the utoo-root-signed.zip to root it. It keeps failing. I was wondering if there is someone out there that is in the process of renewing the file so that it works on the most recent update from Prestigio.
Thank you in advance for your time and your great work regarding all things that are Android
Az
Click to expand...
Click to collapse
Hello all,
I have the same PMP5588c_Duo device (4.2.1 stock Build PMP5588C.20131231.1.0.42) and managed to easily root it using Kingo root (kingoapp.com). It's a straighforward process:
download the app and install it on your PC
enable USB Debugging from the Developer options on the tablet
start the app on the PC
connect the table and PC with a microUSB cable
do not enable anything else on the tablet (like SD card access)
wait for Kingo to detect it
it will automatically download and install USB drivers to your PC and show a ROOT button
click the ROOT button, wait for 2-3 minutes, it could take up to 10min so be patient
the device will automatically reboot after the root has been applied
at which point disconnect the device
after the restart check for the SuperUser app, it will automatically install it
Have fun.
Z.
Zapryanov said:
Hello all,
I have the same PMP5588c_Duo device (4.2.1 stock Build PMP5588C.20131231.1.0.42) and managed to easily root it using Kingo root (kingoapp.com). It's a straighforward process:
download the app and install it on your PC
enable USB Debugging from the Developer options on the tablet
start the app on the PC
connect the table and PC with a microUSB cable
do not enable anything else on the tablet (like SD card access)
wait for Kingo to detect it
it will automatically download and install USB drivers to your PC and show a ROOT button
click the ROOT button, wait for 2-3 minutes, it could take up to 10min so be patient
the device will automatically reboot after the root has been applied
at which point disconnect the device
after the restart check for the SuperUser app, it will automatically install it
Have fun.
Z.
Click to expand...
Click to collapse
hey Z.
thank you for the guidance.. testing it now so will update shortly.. although the program thought I had a samsung note lol
ok, this is an update.. seems the program did not want to root my tablet. when I started it again, it classed it as a google device, but said connection failed due to cable instability.. guess I will have to try another way
double update... after leaving it for a few days, it seems to have wanted to work.. woohoo. thanks Z for the info
help with prestigio multipad 8.0 HD !!!
Welcome. I have a problem with this tablet.
Tablet died after a crash. There is no option to enter a Power + vol +
also does not move with the micro SD card from the system manufacturer Charges start-up screen and that's it. When connected to a PC saw it as m3-chip.
In total, I found drivers in Device Manager I did update the driver for the M3-chip and now the tablet is listed in my device manager as libusb- win 32 device. I found a program that detects such a connected tablet. The program is Amlogic Image Burning Tool v.1.6.2.2. For the time being this my progress stopped. I was trying to upload with this software firmware downloaded from the manufacturer's website dedicated for this device, but I get the message "find no upgrade" and do not know what to do. Can someone help me ??? I'm not an expert, and the above step I got reading the various forums. To my eye it looks as if they fell bootloader, but thanks to the above program to see the tablet (or rather its processor) and now combines where to download a bootloader to throw it out there and then be able to upload the system such as the sd card. Or is there some other program or a way to restore the dead to life my tablet ??? Can you help ???
1. Turn off the tablet (hold the power button and count to 12
2. Insert prepared SD card https://yadi.sk/d/_6VITNSbhKPyi
3. Press and hold the "Vol +", press "Power ON" for 2 sec.
4. Release all buttons and wait for boot TWRP (about 10 seconds)
5. In TWRP select Install -> update.zip
6. Reboot tablet
testatura said:
well, i hope this will pass cause I am a noob here..
As an owner of this pretty much cheap and quite alright device I had hard time finding proper root method but in the end it was found..
Mine was already on 4.2.1 and the rest is as usual 1,5ghz dual core, mali 400 graphics, and apparently cortex a7 not a9 as on the box.. but who cares, right!?
so i got to the file (its actually based on crystal_root method from xda but some smart guy somewhere just made it work for 4.2 generic tablet ) I apologize if this si mentioned somewhere else, and I couldn't reply to crystal root board cause i am a noob, but I am sure some people will find this useful, that's all.
ok...you can chat here with me untill i got those 10 posts to upload link, you can google "Aigo M80E - JB 4.2.1 - help with rooting (killing cell standby)" or you can be a good soul and my first mate here and paste link
Cheers!
Click to expand...
Click to collapse
Sorry Dude but it doesnt work ..... while updating abort... i tryed with all known firmware from the company ... kingoRoot KingRoot and also OneKlickRoot doesn´t work too. I´m Sad about that...
regards Michael