Im using a galaxy s2 with Lite'ning rom (android 4). But i couldnt resist the MIUI UI (android 2) so decided to change to it. I placed my zip files in the internal storage and reboot CWM to install the zip. But to no avail, my phone gets stuck in boot loop twice. so im wondering is it because of the different android version that my phone refuse to boot? How can I overcome it to install MIUI?
Thanks in advanced
Did you do a full wipe?
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- Flash MIUI.zip
Draak22 said:
Did you do a full wipe?
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- Flash MIUI.zip
Click to expand...
Click to collapse
I missed the Wipe Dalvik Cache. Will try again later. Thanks for your help ^^
Draak22 said:
Did you do a full wipe?
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- Flash MIUI.zip
Click to expand...
Click to collapse
I did all of this and it still loops at welcome screen T_T
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- /format system
- Flash MIUI.zip
I would throw /format system at the end.
Its under mounts and storage in your CWM menu
Chakker3D said:
- Reboot in CWM
- Wipe data/factory reset
- Wipe Cache
- Wipe Dalvik Cache
- /format system
- Flash MIUI.zip
I would throw /format system at the end.
Its under mounts and storage in your CWM menu
Click to expand...
Click to collapse
still fails. everytime it bootloop, i need to use odin to install lite'ning to enter CWM again
....................................
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card .
Remove battery
Boot to download mode
Open Odin
Install correct stock firmware or even your original firmware .
Still fails install old bootloader .
jje
hi
hi there
here is the best way solve ur problem as this has happened to me as-well,
first thing is download the stock rom form sammobile.com, then flash it using odin and then re-root and install CWM then install Miui Rom, if ur still stuck in the boot-loop then do a full wipe, if still stock, then try a deferent miui rom customized here is whet i have in my phone and its amazing and fast and batter saver for me,
MIUISP V.12 by Dragon
i hope this was helpful for you
Regards
iMatrix
Im currently using ver1.0 Pro but cannot seem to download any other versions after that.
I tried even Infinitum Project, i cant seem to get it pass the start screen.(meaning before the boot animation). Similar when flashing RR ver1.1 onwards
I think i cannot go anywhere after android 4.0.4. I am only able to flash back to v1.0 (Android 4.0.3).
what could be the problem? help?
can u explain the process you followed for the installation of the other roms after 1.0?
oh sorry.
For the RR Pro 1.3
full wipe
installed rom
reboot.
Infinatium project,
Full wipe
installed rom
installed gapps
installed themed gapps
reboot.
I would usually just follow the instructions that are given.
sorry too I were configuring my cellphone, just flashed to the 1.3 and works fine...
sometimes my sd card give me problems and I remove from the device, maybe it's not your case...
and additional to the wipe, I wipe the dalvik cache, and then install the rom.
In the roms in wich I got troubles with the start screen or rebooting its because the baseband (LPQ in my case) and I'm serching foward about these thing...
sorry about my english, but its not my native languaje
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
jonsim86 said:
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
Click to expand...
Click to collapse
Apart from asking the dev i suggest a full wipe and clean flash may cure the usual Kernel Panic .
jje
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
jonsim86 said:
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
Click to expand...
Click to collapse
wipe data,cache,dalvik cache and format system from mount and storage.
after installing also wipe cache and dalvik cache then reboot.hope this solves ur problem.
meaning to say i should delete everything in my storage and sd card? like format the memory?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
formatting system doesn't format ur sdcard data, it only
formats system folder.
sorry im quite a noob so... how do i format the system?
jonsim86 said:
sorry im quite a noob so... how do i format the system?
Click to expand...
Click to collapse
go to recovery mode then mount and storage and select format system.
giving it a try. Thanks
i just cant seem to install anything after v1.
from v1. siyah kernel v3.
did a data wipe
cache wipe
format system
divak wipe
install rom
install gapps fix
reboot
it just get stuck at start up before the bootanimation. why?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
yeap it just clears the system data, then you can do a clean flash from there. that should do it
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
jonsim86 said:
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
Click to expand...
Click to collapse
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Azure Flame Kite said:
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Click to expand...
Click to collapse
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
MyLifeRocks10 said:
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
Click to expand...
Click to collapse
If you just relax for a minute , take a deep breath and start from the beginning. Listen to what people are telling you. Follow step by step from the beginning. Read what the developer says on flashing the rom and then it will work. Almost impossible not to get the rom working after that. It will all come together mate. Read a lot of posts. Good luck.
Sent from my GT-I9100 using xda premium
i have flashed Achotjan_4.1.2_Somc_Debrand_Engine_V1.0_RC3_x10 on my x10i but now my x10 wont open i did everthing what achotjan wrote for installation. first my x10 ask first time simlock after that reboot by itself and now not open am i bricked my x10 or what can i do. sorry for bad english
INSTALLATION
Flash 4.1.2 SDE Kernel "
Go to CWM Recovery
Do a factory reset
Wipe Cache Partition
Wipe Dalvick cache
Format System
Format Data
Format Cache
Flash the dowloaded ROM package via CWM Recovery (the rom you downloaded in this thread)
Reboot
now phone is starting but there is only kernel amblem after that green light turn white
Format System
Format Data
Format Cache
is this normal to flashing
hi i have flashed with this rom's kernel and now phone is working
http://forum.xda-developers.com/showthread.php?t=1767916
My phn rooted
Now prbm I install 2.1.3x Installed failed in stock recovery help any 1 fix prbm tell
samheras said:
My phn rooted
Now prbm I install 2.1.3x Installed failed in stock recovery help any 1 fix prbm tell
Click to expand...
Click to collapse
...
Install twrp-2.8.7.0-onyx_f2fs_r4.img
Boot in TWRP
Wipe Cache / Wipe Dalvik Cache / Wipe data
Flash OnePlusOxygen_14_OTA_005_all_201511232152.zip
Wipe Cache / Wipe Dalvik Cache
Flash OnePlusOxygen_14_OTA_005-006_patch_201511301941.zip
Wipe Cache / Wipe Dalvik Cache
Reboot ...
Flash BETA-SuperSU-v2.52.zip
Reboot ...
There will be OxygenOS 2.1.3 x with root.
Does this wipe your current setup? Or only if I choose to wipe data?
I am rooted and custom recovery and want to be able to get otas from not on manually but don't want all data wiped.
Not for me. I dirty flashed otas then supersu from the blu_sparks twrp and didn't lose my setup. It reinstalled some bloat I had to delete again was all.
Use twrp-2.8.7.0-onyx_f2fs_r4.img
Boot in TWRP
Wipe Cache / Wipe Dalvik Cache
Flash OnePlusOxygen_14_OTA_005_all_201511232152.zip
Wipe Cache / Wipe Dalvik Cache
Flash OnePlusOxygen_14_OTA_005-006_patch_201511301941.zip
Wipe Cache / Wipe Dalvik Cache
Reboot ...
Flash BETA-SuperSU-v2.52.zip
Reboot ...
Flash Marshmallow-bootanimation-flashable-1080p.zip ...
There will be OxygenOS 2.1.3 x with root and all your original data unmodified.