[Q] Save my Vibrant! omg im scared :o - Vibrant Q&A, Help & Troubleshooting

ReEDIT: FIXED! I used one of the usb slots on the back of my PC and it worked fine
EDIT: Ok so i restarted my PC and odin is now detecting it again. But now it just gets to the factory step which is about 10% and then says failed writing. So i still have a problem :/
Ok so i was following instructions i was given in my earlier post on how to take my vibrant from miui to stock and im sure i followed everything exacty but when it as in odin it got up to factoryfj.gj or however it goes and it froze up there and my phone went to a gray screen and all the UI lights were off after about 30 mins i unplugged and removed battery. i can no longer boot the phone normaly. only way i can boot now is in download mode. and when i try that and put it into odin its not being detected anymore (( i just got git this phone a month ago. man someone please tell me this is fixable

Related

[Q] HELP needed!!! Soft-brick???or what???

Ok..I hate to sound like a newbie, but I am when it comes to the GB stuff. So I was coming from Bi-Winning ver. 3 and followed the OP for Simply Honey 3.8. But in the first part of ODIN, the screen went completely LIGHT PINK and stayed there for about 30 minutes. So, I had to redo, but now ODIN and Windows 7 32-bit doesn't recognize my phone. I can bring the phone into DOWNLOAD MODE, but it will get stuck on the Phone>>!>PC screen if I try to boot normal. NOW IT DOESN'T EVEN SHOW A SCREEN WITH NO LIGHTS!!! Can anyone please help??????!!!!!!!!
when i messed up a flash and my computer didnt recognize my phone i changed ports and restarted my computer and it worked. worth a shot

[Q] Odin is flashing several hours...

I've flashed my Galaxy S2 with Odin several times and it has worked fine until yesterday, when I tried to flash again, and everything just froze.
I followed the normal instructions for flashing and the phone just stopped at the "downloading" screen where it says, "Do not turn of target!!".
So it has been, for several hours now. The Odin window on my computer seems to be waiting... but for what? Will it ever time out?
Is it normal that a flash session can take several hours?
Is it safe to interrupt it?
fugy56 said:
I've flashed my Galaxy S2 with Odin several times and it has worked fine until yesterday, when I tried to flash again, and everything just froze.
I followed the normal instructions for flashing and the phone just stopped at the "downloading" screen where it says, "Do not turn of target!!".
So it has been, for several hours now. The Odin window on my computer seems to be waiting... but for what? Will it ever time out?
Is it normal that a flash session can take several hours?
Is it safe to interrupt it?
Click to expand...
Click to collapse
Odin will flash, takes less than 5 minutes.
Is there any data running that you can see? I mean at the bottom left. I would suggest you turn off the phone, battery pull, wait for 5 minutes, and reflash back.
If it semi bricked, use JIG to revive it.
Either way, you can't be letting the phone there for the next few days etc right?
Did you click Start in Odin??
Although i don't have an s2(will be getting one soon) did you try to reset your pc? When i was flasing my sgsl i was stuck in this situation where odin seems to freeze everytime. I restarted my pc and poof, flashed without a problem
Edit: was flashing successful? If so maybe you should follow the instruction from the post below.
Sent from my GT-I9003 using XDA Premium App
This might sound stupid but did you have 'auto-reboot' checked? It happened to me once even though I have flashed hundreds of times. Odin was still open after flashing a kernel and never reset.
Start was clicked - yes.
Re boot was checked - yes.
I reset my computer and restarted my phone and - now it's still frozen, but with an icon on the center showing three icons in a line. First is a phone, second is a exlamation mark and third is a computer. Yiipiiiee. It doesn't boot. I can't get into recovery mode. Download mode does work however, but still the same behaviour. It freezes if I try to flash it.
Now what? Where is that reset-button which resets the phone and clears its brain down to original mode? A simple "brain wash" would be nice.
Is there anyway out of this "freeze of death" ?
Flash CWM kernel, download CM7 rom, copy it on SDCard (mount USB storage in CWM, connect to PC via USB, copy ROM), flash ROM from CWM
fugy56 said:
Start was clicked - yes.
Re boot was checked - yes.
I reset my computer and restarted my phone and - now it's still frozen, but with an icon on the center showing three icons in a line. First is a phone, second is a exlamation mark and third is a computer. Yiipiiiee. It doesn't boot. I can't get into recovery mode. Download mode does work however, but still the same behaviour. It freezes if I try to flash it.
Now what? Where is that reset-button which resets the phone and clears its brain down to original mode? A simple "brain wash" would be nice.
Is there anyway out of this "freeze of death" ?
Click to expand...
Click to collapse
Try to go into recovery mode and factory reset and clear cache and try flashing again (make sure you are on download mode)
Sent from my GT-I9003 using XDA Premium App
Hold power button to off it (hold a lil longer for this).
Then Go into recovery mode (power, home button and volume up at same time). Try do wipe all data, cache and even dalvik. Reboot and see if that works.
Alternatively, at the same place, go into restore backup.
The man said: "I can't go into recovery mode"
...
Recovery mode doesn't work - nope. But thanks anyway. It's nice to see that people at least try to help. Big hugs to you all.
If I try to flash CWM, I come into the same freeze again. Mindbending stuff ala Samsung, huh. They clearly don't make idiot-safe products. I'm stuck. My next phone might be a StarTAC...
Has happened to me before. KIES was opened. I closed all KIES files and the flashing fun started again~
Good point, make sure Kies isn't running when using Odin!
Also, now that you've flashed CWM, can't you boot on it?
Kies is not running and whatever I flash - it freezes. The green progress bar in Odin reaches maybe 1 cm, but no blue progress bar is visible on the phone as usually happens when flashing. It just says, "Downloading... Don't turn off target!!"
Am I slowly heading towards the brutal-axe-method?
Sounds like the NAND is damaged to me, but I'm no expert...
"NAND" means? Why does it sound like it's damaged? How can it get repaired?
NAND is the flash chip (internal sdcard). Seems that its damaged because you're unable to fully flash it.
I don't think you can have that repaired (if the NAND is truly damaged, like I said I'm no expert), you'd have to get the phone replaced.
With all respect, let's hope you aren't an expert, but better. But has anyone else interrupted a flash process and went though a "freeze"?
I'm looking for a way to reset the phone to use only what was burnt into ROM from first delivery. I just can't accept that it is so easy to mess up a phone, and I doubt Samsung would be so crazy not to build it with a rescue kinda last savior. Am I totally naive? Is my baby dead? :'(
lol I hope for you that I'm wrong also!
fugy56 said:
With all respect, let's hope you aren't an expert, but better. But has anyone else interrupted a flash process and went though a "freeze"?
I'm looking for a way to reset the phone to use only what was burnt into ROM from first delivery. I just can't accept that it is so easy to mess up a phone, and I doubt Samsung would be so crazy not to build it with a rescue kinda last savior. Am I totally naive? Is my baby dead? :'(
Click to expand...
Click to collapse
Something similar had happened with me too. The phone was stuck b/w flashing with odin. And the startscreen was showing those 3 icons. It was soft bricked.
But I then finally fixed it by flashing CF and then a ROM

[Q] phone not starting . (soft bricked)

My phone is not restarting. I am using a Samsung Vibrant T959.
I really love the phone since it a gift from my sister and I hope i can fix it. It had no issues, with a stock 2.1 firmware, but last month I installed ICS on my phone after which I started receiving me errors.I guess the ICS version i installed was not very stable. Usually restarting the phone would fix the problems and I would be good to go. However last evening when I got the error I restarted the phone 2 times but I would still receive the errors. The 3rd time I restarted it, the phone got stuck on the animation screen and did not boot.
I tried the recovery mode and it worked fine.
I took a backup of my data using the USB debugging mode of the phone.
Since I was irritated with this version of ICS i tried to root my phone using Odin.
Odin failed. The phone was stuck on the downloading screen for some time so i disconnected the phone from my computer and now the phone will not start.
It does not boot, it does not go the recovery mode nor the download mode. when I press the power button or the three buttons (volumn and power) together the screen shows a mobile phone a computer and a disconnect between the three (Phone ! PC sign).
I do not know how to fix it. Any help on this would be appreciated.
Closing this thread so that your duplicate can progress.

[Q] phone wont boot after flash attempt

A couple days ago, within an hour of using my phone and everything seeming to be fine, my phone got stuck at the Galaxy Note II logo. Thinking that it locked up and reset itself or something like that while in my pocket, I pulled the battery because it didn't respond to the power button. after I replaced the battery and turned it on, it stopped at the same screen. After a few attempts, I tried to get into recovery mode and it only got to the download screen. After some research, it sounded like I could maybe flash the stock rom onto the phone and get back up and running. so I downloaded ODIN and found what I thought was the correct ROM and tried to flash it. ODIN gave an error about unable to find a PIT file, so more googleing later, I found a PIT file and tried again. ODIN tried for about 10 minutes and then failed. My phone was still on the download screen so I thought to just try the process completely from the start again. I unplugged my phone from the computer and tried to restart it, I think by holding the power button down but I may have just pulled the battery. once my phone turned off it hasn't turned back on again. It wont even attempt to charge when I plug it into the wall.
So I ask the people who are far more experienced with this kind of thing, did I unrecoverably mess up my phone, or is there something I can still do?

Samsung j6 soft brick problem

Hi guys, I have a samsung galaxy j600fn/ds, tryed to flash twrp, something went wrong and now I'm locked on the ''Samsung'' logo screen
I guess it is brick, though I'm totally stuck at the screen, the phone won't even turn off, so I don't know how to acces download mode to install stock firmware.. anyone can be of help?
EDIT: solved.. of course the solution was just to wait for the battery to be completley depleted, I just got scared there not beeing able to do anything
Wait-
So you just let your phone in bootloop all night (?), then you charge it without turning it on,
waited till 30%, and then you put it in download mode and installed the firmwere?
Does it really work? 'cause I tried to do that before, and the bootloop stopped. I tought I ended up into an hard brick.
I pressed powen and tried to put the phone into download mode, but nothing.
I put the usb on my pc, and odin was actually reading it, so I tried again and again to get into the download mode.
Afret 30 minutes, i pressed power again, (and finally) the boorloop restarted.
Well um.. the phone now is probably at 60%.. I hope it wont stop again, and I hope this method will work.

Categories

Resources