and a number of issues:
- The neocore (no sound, no touch / no sound, touch)
- Battery life
- Game: PES 2012, the third blade, Gangstar 2: miami, dungeon hunter, dead space.
- Automatically kill process
Heheheh, update clip "gingercrust 1.5 + gbs.111126 oldfix usleep2000" and a number of issues in the clip.
1. Neocore: (score as high as possible -> higher game playing as good, it is the frame rate must be).
- No sound + no touch: 66.3 FPS.
- No sound + touch: 61.3 FPS.
2. Pin.
- The battery is 81% after 11 hours 33 minutes (including reading kindle 1 hour 56 minutes out).
- Soon to test constantly to game 11 hours 54 minutes, the battery is 74% -> 20 minutes after the test, more game, then pin down 7%.
3. The process runs in the background:
Looks like the application tweak kill themselves do not use often, so applications that run underground only three: install, type in Vietnamese and zmooth -> save battery power, saving ram.
4. Game:
- PES 2012: the silky smooth Oh, look a bit.
- Third Blade: numerous new play, a third shock, from then on was silky smooth Oh, but the phenomenon did not lag at all shocked.
- Gangstar 2: miami ..: O is silky smooth, but not fix thorough multi-point, driving hard.
- Dungeon Hunter: so smooth, do not even have to debate.
- Dead space: the more smooth.
p / s: just watch the clip you just verify that the air like light.
http://www.youtube.com/watch?v=HJagrV01PgU
Ok nice review
About zMooth - i think it actually drains more battery, as it uses gestures - that means it uses more CPU cycles. So, actually if there was an app that only disables the backlights of the buttons, it's even better for battery life
thanks for your intentions. But I used zmooth, fearing damage the hardware key (in the long run, not because the battery)
terratrix said:
Ok nice review
About zMooth - i think it actually drains more battery, as it uses gestures - that means it uses more CPU cycles. So, actually if there was an app that only disables the backlights of the buttons, it's even better for battery life
Click to expand...
Click to collapse
hi! button savior ít drians more battery too?
sr my english so bad
Related
Is there a thread on over clocking the prophet ? tools? safely?
Battery Status! Nice tool and very stable!
http://forum.xda-developers.com/showthread.php?t=270751
BS rulez
I've set the CPU up to 273 mhz with BatteryStatus.
Absolutely stable.
Also the integrated tools in BS are verry comfortable.
Give it a try.
Greetings from Germany,
skylow
Sweet
Thanks Skylow
Ive over clocked it to 273mhz and wow is it fast& stable like you said ....thanks for the tip and greetz from Sweden
Hi !
I have also this speed for my S200, stable fast etc. no crash + I have dynamic overclocking "cpuscaler" settings.
min.:134 org.:195 max.:273
What do you think ? The oc is negative for battery uptime ?
Greatings from Hungary !
about 2 months ago, someone (I think it was Gullum) has noted that using cpuscaler has a negative effect on battery life as it prevents the device from going to sleep. I haven't used it ever since but also I haven't verified the effect. I always overclock my device to 273 and tap on the battery status today plug-in to set the speed back to 195 when oc is not needed (again, just as gullum suggested)
I have dynamic 123-175-208. Great for battery life for me.
amazing, after i overclock it to 273mhz im able to see the streaming video with no lags (live tv channels over wifi) !!!
im verry happy, watchin tvchannels on my prophet =)
I've heard that it has a bad effect on CPU and may cause CPU breakdown.
Is there anyone to verify that?
Bluetooth and overclocking
Hi!
Recently I discovered that if I overclock my devices (Prophet and Touch) I have a strange behavior using the bluetooth freehand environment integrated in my car. The WM Device connects and after a short time it disconnects suddenly. If I receive a call it takes a few seconds and it reconnects again - but you miss a few seconds of the phonecall!
With no overclocking everything works normal - bluetooth connect and disconnect if you leave the car.
(Btw my car is an Audi.)
Maybe somebody has the same problem.
Regards!
HAHA
skylow said:
I've set the CPU up to 273 mhz with BatteryStatus.
Absolutely stable.
Also the integrated tools in BS are verry comfortable.
Give it a try.
Greetings from Germany,
skylow
Click to expand...
Click to collapse
i use always at 286mh and till now i haven't problems with.
guys,do you use application based overclocking???
Baterystatus
tonydeli7 said:
guys,do you use application based overclocking???
Click to expand...
Click to collapse
Baterystatus for me
maxniper said:
Baterystatus for me
Click to expand...
Click to collapse
i know,i use it too but do you use the application based overclocking feature for phone&camera?? today i noticed some missed calls that showed up 3hrs later... I was using 2.20.21 Radio rom and CPU at 260MHz.Now i flashed 2.19.21 and CPU at 273MHz...and no problems so far..
Is that safe push it that way??
270 is not too much???
how about temps??
thks
CPU clock
I have a Jamin G4 and here is the overclocks that I tested:
I use Batt Status and Set CPUscaler.
Range from 99 to 286MHz is stable for Prophet (in my case)
- more than 286MHz which is 299 or higher PDA freezes.
- under 100MHz, 99MHz the screen has a light flick.
- I believe lower clock will save battery and higher clock may shorten CPU life.
- use Cpuscale to vary the cpu clock, especially when idle, it drops to lowest, hence save more battery and as active the cpu will step up to the max limit where you set your max
- Don't overclock unless you have to.
- My reference: CPUScaler from 99 to 260Mhz for normal use. And set to 286MHz unless you need to like games.
Eg: I have tested 286MHz and played Skyforce Reload for a few hours... beautifully... no problem
vnt said:
I have a Jamin G4 and here is the overclocks that I tested:
I use Batt Status and Set CPUscaler.
Range from 99 to 286MHz is stable for Prophet (in my case)
- more than 286MHz which is 299 or higher PDA freezes.
- under 100MHz, 99MHz the screen has a light flick.
- I believe lower clock will save battery and higher clock may shorten CPU life.
- use Cpuscale to vary the cpu clock, especially when idle, it drops to lowest, hence save more battery and as active the cpu will step up to the max limit where you set your max
- Don't overclock unless you have to.
- My reference: CPUScaler from 99 to 260Mhz for normal use. And set to 286MHz unless you need to like games.
Eg: I have tested 286MHz and played Skyforce Reload for a few hours... beautifully... no problem
Click to expand...
Click to collapse
Don't you have any problems with camera at this speed? Mine already at 221-247MHz has pure picture quality at highest resolution - some colors disapearing...
ZRimaZ said:
Don't you have any problems with camera at this speed? Mine already at 221-247MHz has pure picture quality at highest resolution - some colors disapearing...
Click to expand...
Click to collapse
The same happens on my NEO when I go beyond 221 MHz. My camera shows weired colors.
had a strange issue with batterystatus today... i tapped on 'minimize' and it appeared to minimize to the system tray... but i cannot get it to come back. tapping on the phone icon in the system tray shows a maximize option,,... but it does not bring the today screen plugin back... :/
anybody see this issue?
My current setup is as follows
-Weekly #3
-Faux's 1.0GHz 0.2.3 (no UV)
-N_-1.77.30P radio on AT&T
The battery often reaches temperatures in the 40s (Celsius) and the CPU in the 50s.
This happens when I do normal activities like web browsing or texting.
I don't experience battery drain when using my phone as a feature phone.
If I play games, even the simplest ones like Angry Birds or Dragon Fly, my battery hits 45+ C and my processor into the high 50s. The battery drains almost 1% every 2 minutes when doing this.
If I listen to music (through headphones with Google Music app from the market and offline music), I lose 1% every 6 minutes (almost exactly) even with the screen off and device unused for that period.
My idle battery life is perfectly fine, often only losing 1-2%/hr without use.
Is this normal?
its extremely normal... lots of threads like this(could have searched?) if you want to improve it underclock. Also your phone will shut off automatically if it gets too hot so don't worry
i'm running CM7 and underclocked to 608 mhz and runs everything with no problem even some games then i crank it up if its really necessary in those settings my phone barely gets hot and has good battery life
I have a problem the moment i play a game my phone screen and the back side becomes very hot and then after i close the application if my battery is 50% its only taken 20 minutes to reach 0%
system battery config says that screen is using most of the battery
after i reboot the phone its becomes alright
some apps and games i use
Network spoofer
f18 career landing
splinter cell
and pro evolution soccer
karan.champaneri said:
I have a problem the moment i play a game my phone screen and the back side becomes very hot and then after i close the application if my battery is 50% its only taken 20 minutes to reach 0%
system battery config says that screen is using most of the battery
after i reboot the phone its becomes alright
some apps and games i use
Network spoofer
f18 career landing
splinter cell
and pro evolution soccer
Click to expand...
Click to collapse
s2 getting heated a bit while playing games is a known issue ma8.
u can try a different kernel and see the same heating issue gets reduced, though not complete but to considerable extent.
If ur kernel suport governour seting , try to use set cpu and use ondemand gavernor to playing game
Kool
NoeRie said:
If ur kernel suport governour seting , try to use set cpu and use ondemand gavernor to playing game
Click to expand...
Click to collapse
changing rom to 7comp lemme see if i am facing the same issue
i am aware of heating of phone while gaming but then on stock roms the heat goes down when sames are switched off
but here the heating is on till the time the battery does not go to 0%
have set cpu ondemand lemme see if it works
thanks..... will comeback
I've played GTA3 on these settings:
CPU: 1600-1600 MHz, performance, I/O vr, dual-core mode
GPU: 100-200-400 MHz, 900-1000-1100 mV
+ charging battery
= max batt temp.: 52°C & no reboots
Just try to combine settings
Dont forget to use sio on i/0
No need to say thanks just press it
Known issue, Use different kernels and optimize the setting for yourself.
Hi! Didn't find thread like this.
Please post Your temp. of phone during casual usage. Not hard playing games. Just plain internet surfing, camera using, video capture, calls. Just for statistics.
I can say, after 12 measurements, that:
During casual use i have 26/28° C
In stand-by my temperature is 21° C
Playing a tegra 3 game for 30 mins 46/49° C
However I think the values are also affected by the ambient temperature in which the phone operates. Mine is 18° C
MOD EDIT: No placeholder allowed and the major content of this post saying "S7"?
OP, please take some time to edit your forwarded post in a proper format. Thanks.
The T800 travels from the FUTURE to bring YOU the POWER AND BATTERY of a Galaxy S10+ to your beloved S7, while fighting obsolescence...
Version III features:
° 14 hours of battery life sustained with OneUI 5.1 (STOCK kernel)
+ 14 hours of SOT
° About twice or more the speed with no Lag por shutter
° Vídeo about how to apply UV properly and recommended ROM and kernel and many extras (Such as GPU Turbo and FPS screen uncap) ( In s23U don't needed! All of that in only 14 hours! And for free!!
This revolutionary CREATION of mine will give you the SAME (not shame) optimization as Apple do with it's phones (Tremendous battery life and smoothness) But with two or three times the amount of ram, better screens twice the cores, battery ,etc. So:
HERE IS THE AWESOME SPEED YOU CAN SPECT Before/After:
AND HERE IS A BENCHMARK WHERE YOU CAN SEE TEMPERATURES OF 20 OR MORE DEGREES LESS THAN STOCK ROM, WHILE SAVING BATTERY Classic s7 results.
"65% of charge in 30 minutes full charge achieved in less than a hour..." With Aosp only
Q: Why does the manufactures do this bad on stock on purpose?
Two things, MARKETING and PROGRAMMED OBSOLESCENCE which lead them to even put 10 core when a Apple device with two high power cores (Iphone 7 plus) eats it (Mediatek 10 core setup)
Q: What kind of results will i experiment?
With LATEST LINEAGE 16 + Morokernel + this AWESOME PROFILE and with a non-degraded battery you will experience the performance of a Samsung Galaxy S10 with the battery life (and also charging speed, if you have a QC 3.0 charger... of the Latest huawei/honor phones (8 hours SOT, 65% in 30 min) feeling the ui completely lag free, the apps opens right at the moment, and scrolling is like butter. Also runs very very well like a SD 855
IN S23U and, from that, ALL S23 LINE YOU CAN SPECT MUCH BETTER RESULTS!
So i upload you the profile, you will need the following: *Updated S23*
1: Root and follow the guide as close as the video on S7, disable two cores (7/8) and put the freqs as close as the video, you can even CUSTOMIZE it If you want. B throut the best results, following the Guide. You can use Mtweaks or Kernel auditor.
And If you want throw some benchmarks for cpu/gpu temp and SOT feel free to TEST.
Morokernel installed
Mtweaks latest
Download the latest LAG_TERMINATOR™
Open Mtweaks menu and select "profiles" then import the latest "LAG_TERMINATOR™" profile of mine.
APPLY THIS SETTINGS ON BOOT AND YOU ARE DONE. Vídeo settings:
You have to apply this settings on Mtweaks to Morokernel and you are Done. You can also flash the attached zip's to uncap 60fps in all the system animations and GPU turbo for more gaming/phone normal use performance.
1Morokernel and mtweaks download (all in 1 flashable zip) (Works on aosp and TW roms) https://androidfilehost.com/?w=files&flid=295574
2DOWNLOAD NOW THIS AWESOMENESS:
https://www.mediafire.com/file/k964wlh4c4qz5ol/LAG_TERMINATOR™.json ***SEE THE ABOVE YOUTUBE VIDEO AND APPLY THE SAME SETTINGS AND LATTER YOU WILL ENJOY THIS.[/COLOR]
Disclaimer: You don't have the right to post my content in any site without my explicit permission[/U].
Note: If you want me to buy some toys/good sweets to my dear cat you can always donate some money to my paypal: MOD EDIT: donation link removed. Thank you
Hi! touching my phone and having common sense let me know that the Exynos GPU and the low power cores/high power cores have a little nonsense regarding to STOCK thermal and CPU/GPU freq/usage, so, i change between low power cores to high power cores at 50% it's minimum frequences and let the system to use ONLY the high power cores, heavy underclocked, since our phone have thermal copper plate to avoid high temperatures there should be no problem.
But the MORE INTERESTING part of it, it's that this Exynos allows to underclock a LOT among other things, except the GPU which doesn't go really well with underclocking so, when i do this mod, i was able to boost the overall system performance (daily use) like our S7 Exynos is like two or three generations after it regarding to performance! While turning on only hardcore CPU's and not the EIGHT OF THEM the phone not only runs wayyy better, but also runs VERY stable and cold, even better than stock.
Regarding battery life, the overall pack which you only have to import through "Morotweaks" you not only have a lot more benefits regarding low power consumption, but, when you use the powerfull cores ONLY at higher frequency, the Exynos is able to deep sleep more often than before... Regarding additional benefits into the battery life/heat area.
This looks amazing, but where are the download links? Also, will I void my warranty if I use this kernel?
Uhm this look sus
does anyone know how to install? I don't quite understand how to do it
ULTRA90 said:
does anyone know how to install? I don't quite understand how to do it
All the descriptions are claimed for the S7 exynos, so look very sus
Click to expand...
Click to collapse
@Therazorsedge OP, please take some time to edit your forwarded post in a proper format.
Contact me to unlock this thread after all is done. Thanks.