There was a problem with my original Touchpad (it wouldn't turn on), so I sent it back to HP and just received my refurbished model. However, when I start initial setup and it asks me to connect to a Wifi network, none appear, even though my network and my neighbours are all visible & active.
My network setup hasn't changed since my original Touchpad, which connected just fine, so I'm not sure why this one should be giving problems. I've also tried starting in USB mode (reboot while holding volume up) to try and flash with CM7; however, my Macs won't detect it. Yes, I have installed the Novacom driver.
Any help to a) get through initial setup or b) get my computer to recognize it so I can flash, would be much appreciated.
Do a factory wipe in webos
Try a different USB cable
For sync
Make sure your network is set up properly
Hardreset your modem
Ummm... try them and then if nothing works try contacting troubleshooting support with hp
Used WebOS doctor to do a factory wipe to 3.0.4 - still can't see any Wifi networks.
I'm on a new network now; new settings, new router, still nothing.
Restarting in USB mode makes Windows do the "do-do!" sound, but still not showing up in My Computer.
Only option now is to call HP?
Related
Hello all, I have the xv6800, dcd rom 3.3.4 and activesync and internet sharing setup on Windows just fine. However, I have recently gotten a MAC, and I have not been able to get the internet sharing to work via BT or USB. I can understand BT cause I was never able to get it set up on windows either. I don't mind the USB connection, it's alwasy been more stable and a snap to set up with the ROM. However I can't get it working on the MAC. Is there a driver or app that needs to be installed on the mac side? The only think I remember doing on the WIN side is installing the modem driver.
On Mac, I have installed Missing Sync installed and I have been able to attach and sync my winmo phone without issue, so I know I have connection. but I cannot get the internet sharing to work. I checked out the verizon site and they state that they do not make a modem driver for the mac os.
I should also mention that I have winXP set up on the mac thru VMware, but I have been unsuccessful getting this to work the way my original windows laptop is setup. I dont want to set it up that way anyway if I can avoid it.
I am curious if anyone has this working via USB?? I apologize if this has been covered elsewhere. I couldn't find anything related and certainly not specific to this ROM.
I did find this, http://www.keithtastic.com/post/3997...-to-sprint-htc, but it states to buy an app called USB Modem program from www.mobile-stream.com. but wouldnt the ISC app on the dcd rom provid the same functionality?
Thanks for any/all help
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
bmorrisj said:
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
Click to expand...
Click to collapse
then just use internet sharing form the phone as normal?
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
goon55: Like you, I always used a VM workaround to tether back when I had a Mac. I haven't tried this, but I've heard Syncmate allows Internet Sharing on Mac systems. Good luck!
I have no issues connecting my macbook for my 6800.
After you set it up like the other poster told you to, you should have a phone icon next to the bluetooth icon at the top right of the screen. click the phone icon then "connect bluetooth".
goon55 said:
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
Click to expand...
Click to collapse
also when setting up the BT relationship, make sure you select the network services (i believe, there are one or two services you can check)...on the phone make sure you start BT and internet sharing (with BT selected) and when you go to the BT menu on the mac, your phone name should be under "devices", expand your phone name and select connect to network.
just trying to clarify a bit.
i had it
i had bt working for a bit and then was disconnected abruptly.
after deleting the profiles of the pairings on both the titan and the mac, it still wont share the connection although the phone will be connected in bt system prefrence pane, (where you select devices).
when it worked, i would select the phone in the device select, and underneath clicking on the gear to a menu option to 'connect to network'
it worked that wayfor 3 mins.
also, when i configure the device, if i set the phone to internet share while the mac is discovering the services, i get two options to select instead of just one:
access the internet
use device as network port.
edit: got it, apple talk active
best software you can use is http://www.wmwifirouter.com/ it works over BT or wifi and uses your phone's regular data access address which means you don't get tethering charges. NOTE I use the free version, and I have tried the tiral and although it does work, my mogul does not seem to like it and has little quirks after I install it (wifi turns on when I reset even if the switch is off, I don't why but its there).
Hi everyone, I've been trying to use my Windows Mobile phone as a modem for the Macbook, but so far I only see people being able to connect via BT. Problem with that for me is that BT drains both my laptop and phone battery quicker, so I'm trying to find a solution to connect via USB instead. Has anyone been able to surf on their Mac using their Windows Mobile phone as a modem via USB cable?
What you want is Mobile Stream USB Modem for Windows. Windows here being Windows Mobile, it works with my Mac.
Once you set it up, your phone is seen as a USB Modem and you dial from the Mac to this port. There is a free trial, take time to test it, read the forums, I had some initial issues to get it work right, but now it is good, I ended up purchasing it.
Tried BT sharing too, but too instable and drops. Tried the WiFi sharing, but eats battery...
Only downside: as you dial the data modem, it will fail if it is already in use (background email checking on your phone...). I have to disconnect the data connection on the phone to be able to dial from the Mac, otherwise it reports Port Busy.
Thanks for the recommendation, will try it out. Any other solutions in the meantime to connect and share the Internet connection from my Windows Mobile phone to Mac via USB?
I had the same problem, and tried everything recommended in the thread - no dice. I ended up just installing WMWifiRouter and that works like a champ.
http://networkjew.com/2009/03/30/tether-windows-mobile-phone-mac/
This is for cingular, but I'm sure this can be attempted no matter what the provider.
I've been looking for a solution as well, and have yet to find one for USB Internet Sharing on a Mac. I currently just use Bluetooth with an external charger on the phone and laptop since it'll eat the battery of both quickly.
I have an issue with my VZW Touch Pro not being recognized by MDC and have torn out what little hair I had left trying to solve it. I know there are numerous threads of this type and I've read every one I can find but my situation is a bit different (aren't they all ).
Basically, when I hook up the TP via USB to my Vista machine MDC doesn't come up. If I launch it manually it comes up, sometimes flashes the "Connecting" message very briefly then goes to "Not Connected" and sits. OK. So why am I baffled and what have I done? Well....
1. If I set the TP to connect as a "Disk Drive" (as opposed to ActiveSync) Vista recognizes it and asks me if I want to explore files and folders, I can see the storage card;
2. In PC to USB I've tried both WITH Advanced Device Configuration enabled and not enabled;
3. I've installed Activesync on another (XP) machine to see if the TP will connect to it and get the same behavior;
4. I've removed the Remote Adapter and USB Synch in Device manager (following the standard MS troubleshooting guide) so that Vista installs the USB driver, just to make sure;
5. I INITIALLY installed MDC on this machine when I was trying an HTC Fuze. At that time MDC worked fine, recognizing the Fuze and asking me what I want to sync, etc.;
6. Since that time I've uninstalled and reinstalled MDC (several times) JUST IN CASE, although it shows NO existing partnerships;
7. I've turned off and actually removed the firewall even though, as I said, MDC worked fine before.
8. On the TP I've set ActiveSync (I'm hooking to an Exchange Server) to sync "Manually" and Windows Live to sync "Manually", JUST IN CASE that was the problem.
The only reason I really even NEED MDC is that I want to use eWallet and need to sync between the PC and Touch Pro.
I've used the TP as a modem for my laptop via Modem Link successfully, but while ML is set to USB the service is Stopped. Would THAT have any affect on this: one thing I've noticed is that when I plug the TP in the PC (sometimes) displays a message to the effect that it's trying to connect to a wireless LAN?????
Sorry for the length of this message but I figure the more info the better and this really has me stumped.
Thanks for any ideas.
if this helps yo in any way here it is.
i tryed to hook up my TP via WMDC on a Toshiba Tecra Laptop, with USB or Bluetooth and in the best case i managed to send files via bluetooth ... and the WMDC does not recognize the device, it installs some drivers for the cable (i think) and does not find any for the device, so ... it does the same thing as for you, tryes to connect for a second and after that it goes on a endless brake ... never connecting
on the other hand, i had no problems with a dell inspiron, with wista, it installed the drivers instantly and got connected immediately. the same with a Win XP dektop PC using activesync ...
i`m beggining to believe that the software is sort of defective on the toshiba. now i just send file from it and us the dell to sync my TP. i gave up on connecting the toshiba.
Pretty sure you have already tried this...but different USB cord maybe?
uncheck the box for advanced network functionality in the USB - PC connection settings
MogulUser13 said:
uncheck the box for advanced network functionality in the USB - PC connection settings
Click to expand...
Click to collapse
Thank you!! Solved my problem.
This seems to happen a lot... I just replied to another post in regards to this (though they replaced their Touch Pro). Instead of disabled advanced network functionality (which does let you sync), you should try this to repair the error as it has worked on a friend's Pro, as well as mine (I just had to do it 40 minutes ago). And make sure you re-enable advanced network functionality BEFORE doing this:
1 - Hook up phone to computer
2 - On phone, start ICS (Internet Sharing in Start -> Programs)
3 - Select PC Connection "USB" and Network Connection of any type (if Sprint stock ROM, I recommend using "Sprint")
4 - Hit the "Connect" soft-key (bottom left)
If you've never used Internet Sharing on the phone, your computer should install some drivers... Once that is completed, click the Disconnect left soft-key on the phone. Now disconnect the cable from the computer.
Close out ICS or soft-reset the phone.
Once the phone is back up, plug it in - it should work.
I don't know what is getting reset in the phone, but unless I connect with ICS, then ActiveSync will not connect whether I soft-reset or not.
Have had some problem when connecting to the pc using USB or Bluetooth. On the phone itself the connection goes fine all the way (i even manage to download 200mb or 400mb files with opera)
On the computer i also have one USB 3g modem witch works fine and that was confirmed by my ISP.
Have tried Toshiba support to see what was their point, and, although they reply very fast (under one day) the messages are not very conclusive. i leave then have to see what you guys think
"thank you for contacting us again.
You need Windows Mobile Device Centre in order to have the drivers installed and make sure Windows Mobile Device Centre displays ‘Connected’ status. As soon as you have checked this, disconnect the device from the PC, select ‘disk drive mode’ as connection type, re-connect the device to the PC and select ‘Internet Sharing’ within Menu. Then tap on ‘Connect’ at the very bottom of the screen.
We trust that this resolves your query, please do not hesitate to contact us again if required.
Best Regards, "
so when i want to have internet on my computer i am slave to MobileDEvice Center is seems.... anyway this method doesnt work for me so the problem remains the same.
Kalas_22 said:
Have had some problem when connecting to the pc using USB or Bluetooth. On the phone itself the connection goes fine all the way (i even manage to download 200mb or 400mb files with opera)
On the computer i also have one USB 3g modem witch works fine and that was confirmed by my ISP.
Have tried Toshiba support to see what was their point, and, although they reply very fast (under one day) the messages are not very conclusive. i leave then have to see what you guys think
"thank you for contacting us again.
You need Windows Mobile Device Centre in order to have the drivers installed and make sure Windows Mobile Device Centre displays ‘Connected’ status. As soon as you have checked this, disconnect the device from the PC, select ‘disk drive mode’ as connection type, re-connect the device to the PC and select ‘Internet Sharing’ within Menu. Then tap on ‘Connect’ at the very bottom of the screen.
We trust that this resolves your query, please do not hesitate to contact us again if required.
Best Regards, "
so when i want to have internet on my computer i am slave to MobileDEvice Center is seems.... anyway this method doesnt work for me so the problem remains the same.
Click to expand...
Click to collapse
No it doesn't mean you are the slave of Mobile Device center.
They want you to connect to Mob Device Center once, and then download the correct drivers needed for your phone. All you have to do is wait till it says 'Connected' which means that your phone has all the necessary drivers.
I am presuming the rest of the steps are straightforward on your device - so next time you connect device, follow the steps above and it should work according to their reply!
OK, i have seen one Unidentified Device when i connect the phone with usb mode . The windows fails to install it but the connection goes ok the same way (until it fails a bit later).
Anyway, another thing i noticed is, the USB 3g Modem i have Hits the 3.2 Mbit whitch is its maximun speed , but the phone fails to even reach its 7.2.... will it be because of the missing driver? (whitch i have no clue how o install) Is this the same procedure for any phone that uses USB (Android , IOS) needs drivers to work properly?
Thank you
Kalas_22 said:
OK, i have seen one Unidentified Device when i connect the phone with usb mode . The windows fails to install it but the connection goes ok the same way (until it fails a bit later).
Anyway, another thing i noticed is, the USB 3g Modem i have Hits the 3.2 Mbit whitch is its maximun speed , but the phone fails to even reach its 7.2.... will it be because of the missing driver? (whitch i have no clue how o install) Is this the same procedure for any phone that uses USB (Android , IOS) needs drivers to work properly?
Thank you
Click to expand...
Click to collapse
Can I ask if you have installed Windows Device Center or Active Sync using a CD that comes with TG01 or not?
I have installed from the Microsoft website, Windows mobile device center.
Have now tried the same on another computer with Windows XP (Active Sync), and the problem is the same as with windows7 (and Ubuntu) where i have already tried.
I am using one Toshiba OFFICIAL Rom, with USB the connections takes a bit more to set up but normally lasts more time connected, with bluetooth, it connects very fast but when it breaks, the PHone crashed completely and the only way to continue is reset..
Want to know if anyone has similar issue
thanks
Have had the following reply after trying to contact toshiba Aggain
"It is normal for the connection to be slower trough the Internet sharing than your normal computer Internet connection. Please note that the phone has different technical specification than your PC has. Also, the Internet connection that you share has different technical specification than the one you get from your home broadband.
We trust that this resolves your query, please do not hesitate to contact us again if required. #
Can someone explain what does this actually mean? The TG01 Cant be used as a 3G Usb Modem ?
thanks
Anybody used or is using the TG01 as a Data modem for the pc?
I can't connect the Atrix to the Moto Phone Portal using the USB. Just curious if there is a fix to this? Once the browser is launched (it doesn't matter which browser, IE, Firefox, Chrome) it doesn't connect. USB connection is set to 'Motorola Phone Portal' and Moto Phone Portal app says its 'running on on USB..."
Not sure what is going on- connects fine using Wi-Fi... just annoying that it won't connect with USB. Any help is appreciated?
Thanks,
M
are you on a mac? I think it requires the MotoHelper app on a pc - part of the PC drivers.
I had the same issue but I also couldn't connect via wifi. So... I turned off the debug under applications and then it worked fine. But haven't had time to try it with the usb but it may help.
I am on a PC and have the MotoHelper installed, but it still didn't work. Also I didn't see a debug under applications, haven't done any modifications to my phone (not sure if you need to modify to debug or not, but I couldn't find it).
Maybe its a driver issue with my dell...
mcmackk said:
I am on a PC and have the MotoHelper installed, but it still didn't work. Also I didn't see a debug under applications, haven't done any modifications to my phone (not sure if you need to modify to debug or not, but I couldn't find it).
Maybe its a driver issue with my dell...
Click to expand...
Click to collapse
Not a Dell issue. I have Dell running Win7 64bit and it works fine. Try to manually reinstall Motohelper. Also, under you Windows Start button you should have:
START>ALL PROGRAMS>MOTOROLA>Motorola Drivers>Motorola Driver Reinstaller.exe.
Run this CLEAN and REINSTALL and Selct START - see my attached. This will reinstall everything associated with the drivers and Motohelper. Reboot Phone and PC and then replug phone into PC and select USB with Motorola Portal.
Same Problem
I've tried all these things and mine keeps switching back to USb Mass Storage. If I switch it back to Motorola Phone Portal, it will give me the address for my browser and it will actually pull up the Portal on my computer but then the phone will switch back to USB storage and I can't go any further on the computer. I've rebooted the computer and the phone and nothing helps. Any help
I tried all those things as well, but still no luck. However, my phone stays on Moto Phone Portal as USB connection, but just won't connect/load the phone portal in the browser(s) when using the USB cable.
Atrix A said:
I've tried all these things and mine keeps switching back to USb Mass Storage. If I switch it back to Motorola Phone Portal, it will give me the address for my browser and it will actually pull up the Portal on my computer but then the phone will switch back to USB storage and I can't go any further on the computer. I've rebooted the computer and the phone and nothing helps. Any help
Click to expand...
Click to collapse
mcmackk said:
I tried all those things as well, but still no luck. However, my phone stays on Moto Phone Portal as USB connection, but just won't connect/load the phone portal in the browser(s) when using the USB cable.
Click to expand...
Click to collapse
You should uninstall the Motorola Media Sync from the PC. I kinda like the software, but it does it's own thing to much with out giving me control. I have spoken to Motorola 2nd level support, but the were no help. They told me to ignore it or uninstall it. I uninstalled it. I left the Motorola drivers installed. If you reinstall the drivers it'll ask you to reinstall the Media Sync - say NO.
Once the Media Sync is gone, then the Portal will not auto load and you can have control of the USB settings from the taskbar.
I had a similar issues
....First, Moto Phone portal does not work on Chrome (insert IP address into IE or Firefox)
If you still have problems...
On phone, from home screen
select Apps drawer
select Phone Portal
select menu
select Settings
select Secure login
uncheck Enable login
did anyone come up with a fix for this? i have tried everything in this thread with no success.
USB Cable
I had this problem as well, just happened to have a few extra Micro USB Cables around. I found that the phone will work with some Cables and have problems with others. If you can try a different USB cable give it a shot.
It works just fine with Chrome.
The USB cable that came with my phone does not work.
I want to connect my Android phone to my PC.
They are both on the same network and frequency band. 2.8GHz
I have Shareit on both devices.
On the phone I start Shareit, then tap the tiny icon top right hand side of screen.
I choose Connect to PC, It waits, then says no target found
On the PC I start Shareit. It tells me to do as above.
I then select Search Hotspot of Mobile
When I again ask to Connect to PC, I am told that the current network is AndroidShare_8832 and I am provided with a long random password. So far the phone and PC just sit there saying they are trying to link: the phone has an increasing series of circles (TX?): the PC has a ":radar screen" (searching
If I go to the PC's network app, I can actually see the Andriod_8832 network, and I have logged in using the long random password. That does not seem to do me any good. I disconnect again.
The PC and the phone are still jmust sitting there, expandng and searching.
And there I stand.
Anny help greatly appreciated.
Nick
Which android version is it and is it the original ROM or custom?
Thanks for coming back.
It's Android 11 and the ROM is original.
However, this afternoon I tried again and everything went perfectly! I dunno.......
Nick