This is some of the info that I have put together and I figured it may help some of you also. Let me know if I need to add anything. Looking forward to working with this device. Hopefully the Devs will take an interest in it also. With these hardware specs I feel like they will. Anyway, carry on............
Dev/Config/Soft/Tools
CyanogenMod team Touchpad port
HP Site
SDK - Multiple Platforms Instructions
Command line tools
Java - WIndows 32 and 64 Bit Instructions
****Note - Be sure to add the Java Bin path to your Environment Variables PATH
Java - Linux
Bluetooth with Non-WebOS device
Enabling Developer Mode (Rooting)
How To: Connect TP to network sharesHW
Exploded and PCB
Quick sum up/start up guide Thanks KameoRE
Bill of Materials
Specs 16GB
Specs 32 GB
Repair Manual / Teardown
Comparisons
Extra info
Enabling Developer Mode (Rooting)
In general, simply installing the Palm SDK gives you everything you need for full access to the Linux operating system on any webOS device. There is no special "rooting" or "jailbreaking" process. Simply installing the SDK provides you with unlimited access to the Linux operating system.
Download & install the Palm SDK for Linux, OS X or Windows.
Enable developer mode on the HP Touchpad:
Launch Device Info and tap its top-left menu.
Select "Custom Application..." and type in: ##3386633#
In the application, move the Developer Mode slider to the On position.
Tap Reset the Device.
When reset is complete, Developer mode is enabled.
Plug the device into the computer via the USB cable, and just close out the USB storage mode thing.
The next step varies:
Mac OS X / Linux: Type novaterm into terminal to directly access the Linux command line for the HP Touchpad.
Windows: you will need to download and install a novaterm program.
On Windows 32-bit, download novacom-win-32.tgz and install novacom with NovacomInstaller_x86.msi.
On Windows 64-bit, download novacom-win-64.tgz and install novacom with NovacomInstaller_x64.msi.
Then, just like the Mac and Linux users you can just type novaterm.
At this point you will have a window with a prompt that says [email protected]: or something similar.
You are now logged in as root on your webOS device and can do anything you would normally do on a Linux device.
DISCLAIMER: We cannot be held liable for any loss of data, damage, bricking, or other malfunctions of the device. We solely provide the information needed to achieve root access.
This quick sum up/start up guide might come handy:
http://forums.precentral.net/hp-touchpad/293028-new-touchpad-heres-your-get-started-guide.html
[Q] What is wrong with my touchpad?
RESET: Hold Power Button & Home Button until the tablet resets.
Doing the above solved the below issue.
My touchpad won't turn on I used it until it had about 30 % battery last night, but didn't put it to charge. When I woke up this morning, it was at 28% battery. I used it to check facebook and xda, locked it and put it down to watch the price is right but when I went to use it again, none of the buttons unlocked it. I plugged it into mulitple outlets and held the power button for about 30 seconds each time, but nothing is happening I don't know what to do. Can anybody help?
Click to expand...
Click to collapse
solution #2
this happened twice:
plug it in to pc
open webos quick install
tools - command line
type "reboot" and hit enter
Bill of Materials
$318 Bill of Materials
Comparisons
Comparisons
Exploded and PCB
Exploded and PCB
First non-webOS phone to be fully tetherd with HP TouchPad
First non-webOS phone to be fully tetherd with HP TouchPad
Worked for me, I had to fool with it a couple of times to get it to work. My screenshot is attached
The messaging does not work but the phone calls do.
How To: Connect TP to network shares
How To: Connect TP to network shares
spud101
Member
Join Date: Jun 2004
Location: Netherlands
Posts: 574
Likes: 34
Thanks: 43
Thanked 69 Times in 34 Posts
Updated (Sep 7th 2011):
Rewritten to include a method for stock kernel, make shares usable for KalemSoft Media Player & automount at (re)boot. Thx to everybody who contributed to this thread! (Under construction, finished later)
Updated (Aug 9th 2011): processed some comments from this thread and the fact that uberkernel now also supports CIFS (& NFS).
Prerequisites:
- HP Touchpad, webOS 3.0.2 or later.
- One of the following Kernels:
---- Stock kernel
---- Uberkernel 3.0.2-52 or later (Next to support for CIFS & NFS this kernel also supports UTF-8. More info here: WebOS Internals Uber-Kernel
---- F15C,.. (completed later)
- Terminal access to your TP, either via webOS Quick Install or Xecutah + Xserver + Xterm (install from preware)
- Internalz Pro with show hidden files set to yes
Three parts:
This guide has three parts:
Basic Mounting
Mounting with shares visible in apps like Kalemsoft Media Player
"Sticky" mounting: Auto mount at (re)boot
Definitions:
hostIP = IP address of the computer or NAS you want to connect to. You can use hostnames too, but need to also edit /etc/hosts then.
sharename = The share name you want to connect to as configured on your computer/NAS
mountpoint-path = as discussed above, e.g. /mnt/nas
cifs = type of filesystem to mount (cifs is better version of smbfs, I've been told)
auto (or can also be noauto) auto/noauto determines if the share is mounted automatically at startup.
username & password = share login credentials. There are probably safer ways to do this instead of having this plain text on your device, anyone can tell me how to do that?
rw = access mode, in this case read & write, other possibilities exist too
The numbers have someting to do with filesystem check at boot.
1a: Basic Mounting (without fstab)
- Create a mountpoint, a path where the share will be accessible, e.g. /mnt/nas or /mnt/media/internal/nas I used Internalz Pro in master mode for this.
- In a terminal type:
mount.cifs //<hostIP>/<sharename> <mountpoint-path> -o username=<username>,password=<password>
Example: mount.cifs //10.0.1.26/DataVolume /mnt/Shared -o username=foo,password=bar
1b: Basic Mounting (with fstab, not supported by stock kernel)
To be finished later
2: Mounting with shares visible in apps like Kalemsoft Media Player
To be finished later
For now please refer to:
Road to Success - How to allow NAS to show up under /media/internal on Touchpad Apps?
How To: Connect TP to network shares
How To: Connect TP to network shares
3: "Sticky" mounting: Auto mount at (re)boot
To be finished later
For now please refer to:
Road to Success - Mounting SAMBA/CIFS Permanently on Touchpad
-------------------------------
Original post:
In short: The stock kernel on a webOS 3.0.2 Touchpad does not support CIFS. Or at least I didn't get it to work just the same way I do get it to work out of the box on a 1.4.5 Pre-.
Then I saw this thread: F15B & F15C test kernels
It says CIFS support! So I hesitantly installed this experimental F15C kernel, quickly ran Govnah to set max speed to 1.5 GHz (I don't want no real overclocking beyond this speed). But, YES, it does work, I now can access my NAS!
After I initially posted this thread webosinternals also added support for CIFS (& NFS) to the uberkernel (as of version 3.0.2-36). Thanks a lot for that guys!!
So how to go about:
- Install the F15C kernel from the testing kernel feed
The rest is standard linux stuff for mounting Samba shares:
- Create a mountpoint, a path where the share will be accessible, e.g. /mnt/nas or /mnt/media/internal/nas I used Internalz Pro in master mode for this.
- Open /etc/fstab again you can use Internalz Pro in master mode for this
Add a line:
//<hostIP>/<sharename> <mountpoint-path> cifs auto,username=<username>,password=<password>,rw 0 0
hostIP = IP address of the computer or NAS you want to connect to. You can use hostnames too, but need to also edit /etc/hosts then.
sharename = The share name you want to connect to as configured on your computer/NAS
mountpoint-path = as discussed above, e.g. /mnt/nas
cifs = type of filesystem to mount (cifs is better version of smbfs, I've been told)
auto (or can also be noauto) auto/noauto determines if the share is mounted automatically at startup.
username & password = share login credentials. There are probably safer ways to do this instead of having this plain text on your device, anyone can tell me how to do that?
rw = access mode, in this case read & write, other possibilities exist too
The numbers have someting to do with filesystem check at boot.
- Save the file
- Open a terminal
- type in this command:
mount -t cifs //<hostIP>/<sharename> <mountpoint-path> -o username=<username>,password=<password>
No idea whether all the -o options are still needed, as they are in the fstab line already as well.
Apparently mount -a should also mount your shares inside fstab. But for me that didn't work, maybe because I have it set to noauto.
This should do it.
Unmounting as follows:
umount <mountpoint-path> e.g. umount /mnt/nas
Note: as soon as you have a kernel running that supports CIFS, you can also use the xt tools. See this thread and the threads referenced inside it. samba filesharing - install/support thread
The xt tools will take over all the fstab editing and directory creation.
I agree this is still cumbersome. On an Android phone for example this is buildin in every decent filemanager. So I really, really hope that either or both Gemini and Internals HD will have some easy solution for this (both configuring and the actual mounting/unmounting). Or a solution straight from HP, this is also aimed at enterprise market after all!
Last edited by spud101; 09/08/2011 at 07:41 PM.
Thanked by 60milesmile, cookie_42, El_Titi, flyers333, ichi2k, Major Payne, mivoligo, Nightburn, obarthelemy, PF Graham, phil71, pre101, RickNeff, runner77, sf3000, sjp770, sps_2k1, tabaloos, teng_lin, thomaz, timjhenry, tlaswell
Weird shortcut to USB mode
Has anybody else seen this?
While connected to PC in "just charging" mode I reached out and accidentally hit the Volume Down and Power buttons at the same time. The TouchPad instantly switched to USB Storage mode.
Interesting behavior and I couldn't seem to find any mention of it anywhere.
PreCentral had it as a tip on their web site about a week ago and I spotted it there - http://www.precentral.net/access-usb-mode-touchpad.
Quite a few other useful titbits crop up on there - it is worth following. I use the webOS News app from the App Catalog. That gives heads-up on the free software codes as well.
dmarchant said:
PreCentral had it as a tip on their web site about a week ago and I spotted it there - http://www.precentral.net/access-usb-mode-touchpad.
Quite a few other useful titbits crop up on there - it is worth following. I use the webOS News app from the App Catalog. That gives heads-up on the free software codes as well.
Click to expand...
Click to collapse
LOL, I think you mean "TIDBITS."
Too bad there is no reverse version of this.
SOURCE FINDER EXCEL SPREADSHEET
I've been making this table that is specially created for ROM Developers, at first I was doing it for my own knowledge in the rom structure, but why not share? It's not even 50% done (only app/framework so far) but it's worth sharing I think. I will continue to fill in the empty spaces along my building experiences. applying content (more info for table) is greatly appreciated as we all benefit from this table.
Typical scenario where this comes handy: (over dramatized in favor of this spreadsheet)
You're trying to port a rom to your phone, (from source) and you keep getting errors, of course you have logcat as your pet, but still you cannot figure out where to search for that specific thing that keeps crashing, and not to mention in ALL THOSE FOLDER AND FILES (a compiled repo takes upto a [/B]half million[/b] files), of course your developer instincts tell you to do a recursive search but you will find the same folder 20 times, then you think of a recursive grep, but also that returns a ****load of useless info (all links). then you sigh... and take the excel spreadsheet, you lookup the file and browse directly to the right folder, including you know what dependencies it has, so backtracing is easily possible. from here it's smooth sailin' :silly::silly::silly:
Idea's for the "future":
- expand table with binaries from /system/bin, and possibly more folders (after completing libraries)
- make shell script that jumps to the source dir by entering the module/apk/jar name (for example "go services.jar" should jump to frameworks/base/services)
- using "clean services.jar" would delete services_intermediates and it's dependency intermediates. (implemented qc into envsetup.sh, a quick rm -Rf of the chosen intermediates, about 100 times as fast as 'make clean-services for example)
https://github.com/AOSP-S4/android_build/commit/e97fbf5b6c0d52f4b6bbd079659f13ea8c64a22a
Although not very likely, this spreadsheet may contain references that do not apply for your current situation.
Spreadsheet:
https://docs.google.com/spreadsheet/ccc?key=0ArQAWzFXVt6vdGI3anlpNFVTdWtJalUxX2NNTDl5dHc&usp=sharing
PDF is attached
Checked posts / searched for an existing answer... didn't see anything (please move this post if it is in the wrong section)
So I have a app, when I open it asks me what Google ID to uses (preferred ID) but after selecting a Google ID I can not change to a different ID
- If I clear the App Cache the selected ID persists
- If I clear the App Data the selected ID clears and the app returns to the select ID option
- I keyword searched for the App name on my device (Nexus 5x)with Root Explorer (12 different file locations, with subfolders and a bunch of empty folders)
Clearing App Data is a working interim solution, the downside is that every time I clear the App Data the app "downloads assets" (40mb+ ~40 times per day - 1.6Gb!)
What I am hoping to find is a app / script / terminal / log solution that will tell me what file is being modified when I select the Google ID, so I can delete that file re-open the app and change Google Logon
(I contacted the app developer, they said they may be able to fix the problem on the next patch eta 12-24 months)
So I have tried these apps:
https://play.google.com/store/apps/details?id=file.observer
https://play.google.com/store/apps/details?id=scd.lcex
https://play.google.com/store/apps/details?id=eu.thedarken.sdm
But I didn't see system changes (root level) or I didn't know what to look for in LogCat
Any help or suggestions are appreciate!
- I do not have a computer with me (ADB) will be about 7 days before I can try that
- I have been experimenting with deleting files / folders and testing to see if I get lucky (probably not the best method)
- I am not a developer
My current process (as of today) - I clear the app data, then restore the app data with TB (just restoring doesn't clear the sign in status)
As long as my TB backup is "always" in the signed out state, then the "app assets" restore with no issues (and I don't have to keep downloading them)
I am looking for a way to get these (2) operations into a single script / file / shortcut, but it is working for now
I did try the terminal with cp -a (copy the assets - app had a error on library permissions when the files were restored) chmod, chown, and find (try and locate the file) but had minimal success
I wasn't paying attention to what I was doing after updating some apps, and froze some some application that is necessary, now my CATS60 will not boot. The app likely just uses the disable or hide command, but I am not sure what I misclicked, so I need to get a list or currently disabled apps or reenable all apps. I entered TWRP recovery, mounted all partitions, and connected through ADB shell.
This is what I get when I try to find out what's enabled/disabled:
Code:
# pm list packages
CANNOT LINK EXECUTABLE: library "libqc-opt.so" not found
page record for 0x7fb1658010 was not found (block_size=64)
adbd is running as root, and the file does exist:
Code:
~ # find / -name 'libqc-opt.so'
/system/vendor/lib/libqc-opt.so
/system/vendor/lib64/libqc-opt.so
I am using TWRP as recovery, and recovering system, data, and boot from backup does not fix this.
Does anyone know either
How can I make pm command work from recovery?
Where is the list of disabled apps stored, so I can manually edit it?
Thank you.
I found the list as used by the app (com.ramdroid.appquarantine), and it appears I blocked Google Calendar. However I have not found any way to "unfreeze" the app through recovery, this is simply a tracking file the app uses, not the actual enable/disable for Google Calendar.
Setting PATH and LD_LIBRARY_PATH environment variables does not help. Running it from inside the folder containing libqc-opt.so causes it to fail on a different external link.
Copying it to a second file called pm2, opening in vi and adding exports gets me as far as:
Code:
CANNOT LINK EXECUTABLE: cannot locate symbol "__android_log_close" referenced by "/system/lib64/libandroid_runtime.so"
Is it possible to chroot inside adb, and what do I need to mount first in order to do so? I don't know enough about Android to know which parts of the system I actually need.
Hey guys.
On my old SM-J730G device, some ROMs did not have the confirmation dialog for ADB certificates. This prevented me from connecting to the shell, getting logcat output, etc.
To resolve, I needed to copy the certificate to the device, install a root file manager, and copy the file to / data / misc / adb / adb_keys.
Well, I developed an application that helps in this process. Your requirements are only to have the device rooted and to have copied the adbkey.pub file to the device. The app will assist in the implementation of the same.
Download: https://play.google.com/store/apps/details?id=com.gobrito.adb_keys
Screenshots on Play Store page
Created with Flutter
NOTE: if you are in the wrong area, I ask you to move the topic to the correct area, and sorry for the inconvenience, this is my first topic.