[Q] [Android Dummy] How can I uninstall the already flashed zip? - Android Q&A, Help & Troubleshooting

I am using the P990 O2X ,rooted and using CM7 nightly build 204
I have just flashed the AUTO FOCUS 1080p 30fps CAMERA MOD FOR CM7
by LeJay
http://forum.xda-developers.com/showthread.php?t=1094424
However,I found it quite buggy(the screen will freeze suddenly) and want to restore the original camera for cm7...what can I do?
should i wipe all data and cache and flash the cm7 nightly once again? I've done it but the video recording still goes wrong.
or, can i have a flashable zip to replace the buggy mod? the original cm7 camera is just okay
I am not familiar with Android at all, and this is the first time i ask question, thx all

Do a full wipe of data/cache partition/dalvik cache, then reflash the rom. Wipe dalvik cache again after flashing the rom.

the problem still exits /.\
anyway thx...
can u recommend another ROM For P990 O2x?

poso99 said:
the problem still exits /.\
anyway thx...
can u recommend another ROM For P990 O2x?
Click to expand...
Click to collapse
You could try this one: http://forum.xda-developers.com/showthread.php?t=1254359.

It hope it helps! Thx
But do u know where i can find the original cm 7 camera with 1080p.recording?
Sent from my Optimus 2X using XDA App

poso99 said:
But do u know where i can find the original cm 7 camera with 1080p.recording?
Sent from my Optimus 2X using XDA App
Click to expand...
Click to collapse
There is none since it required a mod.

Related

Will CyanogenMod officialy support O1

Just got the O1 last week, my first Android phone! Tried out various roms and loved CM7 beta 6.2. Thanks Mik! Now I am currently on void because of the minor bugs in CM7, especially USB tethering . It seems to me at the rate that mik is going it is only a matter of few months before all the bugs are squashed. In that case, will it become an official release? Does anyone know how it is decided which ports become official?
it will supported by Cyanogen without any doubts ... official Gingerbread = official CyanogenMod
pymebrahimi said:
it will supported by Cyanogen without any doubts ... official Gingerbread = official CyanogenMod
Click to expand...
Click to collapse
Why are you being so sure "without any doubt" about O1 will entering the league of phone which are officially supported by CyanogenMod? Care to explain more?
unxiguru88 said:
It seems to me at the rate that mik is going it is only a matter of few months before all the bugs are squashed.
Click to expand...
Click to collapse
Lol. Only a few days or couple of weeks at the most.
Sent from my LG-P500 using Tapatalk
unxiguru88 said:
currently on void because of the minor bugs in CM7, especially USB tethering .
Click to expand...
Click to collapse
check out LOL rom. out of the 2.2 roms I found that one the best (had alot of SD card issues with 2.2.1 roms) . I run miks 6.2 and its awesome. Having a great time tweeking it and look forward to official support!
cheers
Mik's CM7 is awesome, but because of the headset button being (apparently) an unsolvable issue, I'm sticking to Void for now.
I have no doubts. because most of the work for porting CM7 to O1 is currently done by mik's great work... and all phones that originally support Gingerbread are supporting by CM7 either...
Thanks to Mik, I can use gingerbread on my P500 without waiting for the official 2.3 release from LG. I am very happy with this rom!
Sent from my LG-P500
i like it too
Well i instal cyanogenmood Custon on my Mb300 & it work nice :L
jonathanchor said:
Thanks to Mik, I can use gingerbread on my P500 without waiting for the official 2.3 release from LG. I am very happy with this rom!
Sent from my LG-P500
Click to expand...
Click to collapse
Bro Plz Help Me to Root My Mobile I already root my mobile through GingerBreak APK now how can i install Mik, rom ????? plz tell me bcoz i m new for android..
amit.meena05 said:
Bro Plz Help Me to Root My Mobile I already root my mobile through GingerBreak APK now how can i install Mik, rom ????? plz tell me bcoz i m new for android..
Click to expand...
Click to collapse
You have a lot to learn before you should start installing ROMs. Start by reading http://forum.xda-developers.com/showthread.php?t=900905. Then go to http://forum.xda-developers.com/forumdisplay.php?f=839 and read up on some of the ROMs that are out there. When someone makes a comment about something you don't understand, look it up. After that, you're probably ready to pick a ROM (what in particular do you want your phone to do that it doesn't do now?) and install it.
The best advice ever given here is: make backups before you do anything!
amit.meena05 said:
Bro Plz Help Me to Root My Mobile I already root my mobile through GingerBreak APK now how can i install Mik, rom ????? plz tell me bcoz i m new for android..
Click to expand...
Click to collapse
install custom recovery 1.2(dont go for 1.2.1) or u can install clockwork recovery|make a backup of rom|and procede installing mik rom .
boot into custom recovery
flash the zip file in mik rom for bootloop as most of the time updating from froyo system is not formatted properly.
Wipe data/factory reset.
3. Wipe Cache.
4. Wipe sd-ext.
5. Format /system.
6. install CM7 zip from sd card.
7. Reboot.
8. Done.
http://forum.xda-developers.com/showthread.php?t=1038338 this might help u
First thing after rooting you have to install custom recovery. Search the forum read alot from above posts and install custom recovery. Once u install recovery come back here we will help u.
Sent from my LG-P500 using XDA Premium App
amit.meena05 said:
Bro Plz Help Me to Root My Mobile I already root my mobile through GingerBreak APK now how can i install Mik, rom ????? plz tell me bcoz i m new for android..
Click to expand...
Click to collapse
Read this - [HOWTO] Rooting, Installing - Android SDK, Custom Recovery, Custom ROM's
sure it will b official
amit.meena05 said:
Bro Plz Help Me to Root My Mobile I already root my mobile through GingerBreak APK now how can i install Mik, rom ????? plz tell me bcoz i m new for android..
Click to expand...
Click to collapse
didn't you watch the video when you were registering? USE the search tool.
cyanide911 said:
Mik's CM7 is awesome, but because of the headset button being (apparently) an unsolvable issue, I'm sticking to Void for now.
Click to expand...
Click to collapse
can u plz tell me what is this headset issue??
i am on mik's 6.5.7
gurpreet9080 said:
can u plz tell me what is this headset issue??
i am on mik's 6.5.7
Click to expand...
Click to collapse
Wired headset buttons don't work.
I believe that if you update the kernel this may happen.
Swyped from my LG-P509 using XDA App.

[Q] CM7.1-cooper-KANG-RC1 OR BehradGH CM7 RC 2.2

hi guys .i new to this site and i want to try cm7 on my ace i dont know wich is the best for daily use
cause in the COOPER KANG RC1 it says that the camera and FM doesn't work
pllllz help
THANKS
Everything is fixed, both roms are fine. Pick one and flash it doesn't matter much.
consegregate said:
Everything is fixed, both roms are fine. Pick one and flash it doesn't matter much.
Click to expand...
Click to collapse
THANKS
but how??do i need the 2.3.4 kpb or any 2.3.? kpb??
No. But if you do get connectivity problems you might wanna try switching basebands.
i would suggest to you to try both..
you can flash them via cwm..
you can jump between this two if you choose the right one that suits you..hehe
ive tried both roms
i couldnt find any noticable difference between the two in terms of usage and performance
I prefer the KANG CM7 Rom just because it has the 16 bit transparency, the scrolling gets smoother with this option enabled.
FMAranda said:
I prefer the KANG CM7 Rom just because it has the 16 bit transparency, the scrolling gets smoother with this option enabled.
Click to expand...
Click to collapse
I don't know what I did , my battery is a line above the status bar
Sent from my GT-S5830 using XDA App
I already have BehradGH's CM7,is it safe to flash cooper KANG?
I mean in the instructions,it said that you need 2.3.4,While CyanoAce is having 2.3.7.
I think you can flash directly but make first wipe cache and dalvik cache. If you get bootloop make wipe data/factory reset too.
RaptorX88 said:
I already have BehradGH's CM7,is it safe to flash cooper KANG?
I mean in the instructions,it said that you need 2.3.4,While CyanoAce is having 2.3.7.
Click to expand...
Click to collapse
Even I was on BehradGH's CM7. Later on I flashed Cooper KANG without any problems.

Problems with franco19.4-gbs.v19-cfs

my P500:
Android 2.3.7, cyanogenmod 7.1.0 /stable 6.5.8
I flashed new kernel franco19.4-gbs.v19-cfs. My problem: charging turns on the p500 again - i think, it is fixed?!
I wiped cache, dalvic and battery bevor and after installing kernel ...
de-coder said:
my P500:
Android 2.3.7, cyanogenmod 7.1.0 /stable 6.5.8
I flashed new kernel franco19.4-gbs.v19-cfs. My problem: charging turns on the p500 again - i think, it is fixed?!
I wiped cache, dalvic and battery bevor and after installing kernel ...
Click to expand...
Click to collapse
Oh, another uber lazy reader who only jumps to the download link without reading the thread contents.
THE ANSWER IS : CM7 dont support it so good day.
terratrix said:
Oh, another uber lazy reader who only jumps to the download link without reading the thread contents.
THE ANSWER IS : CM7 dont support it so good day.
Click to expand...
Click to collapse
I agree with you... there's nothing more to say...
Haha.. I agree!
Sent from my LG-P509 using xda premium
Me too!!

[Q] Video recording not working on Neo V on cm7?

I am new to neo V.
Flashed it recently to cm7.2 and applied camera fix.
But the camera is taking pictures with pink shade when flash is on.
Also video recording is not working.
Please help!!!
Thank you.
Please help!!!
Please help someone...desperate here...
The same problem i have been asking...but my camera takes normal pics...only the recording freezes frequently for 1 to 5 secs...reinstall and apply the patch.
Sent from my MT11i using XDA
unisol107 said:
The same problem i have been asking...but my camera takes normal pics...only the recording freezes frequently for 1 to 5 secs...reinstall and apply the patch.
Sent from my MT11i using XDA
Click to expand...
Click to collapse
Should i reinstall cm7 and apply patch? All data will b lost right? Also did this solve your problem?
i had no such problem as you are facing...but reinstallng after full wipe the latest cm7 should solve your problem...all data will be lost...i m on fxp113...what version have you installed? try the latest one...ithink you didnt flashed the camera fix correctly.
unisol107 said:
i had no such problem as you are facing...but reinstallng after full wipe the latest cm7 should solve your problem...all data will be lost...i m on fxp113...what version have you installed? try the latest one...ithink you didnt flashed the camera fix correctly.
Click to expand...
Click to collapse
Ok ill try...
Thank you
anipbhat said:
Ok ill try...
Click to expand...
Click to collapse
I got it to work in FXP115. Thank you for suggestion.

Cyanogenmod 10.1 Memory Issues

Hey everyone!
How's it going?
I recently flashed over the stable build for cyanogenmod 10.0 on my vibrant and that worked really well. I was shocked at how stable and smooth it was!
I saw that 10.1 was put out yesterday, so I flashed that but I'd been having some issues. The gapps zip didn't work all that well and I had to manually install some of the apps. No big deal.
However, I've been having issues with poweramp or apollo crashing out when I'm using the stock browser. I am, however, running juicedefender and autokiller to manage my RAM.
Any suggestions to free up some stuff? I'm really hoping to make this work because it works pretty awesome, but I can always drop down to 10.0 if it doesn't work out since I wasn't having any crashing issues.
In terms of flashing:
I flashed back to stock with ODIN, then installed CWM, then flashed 10.1, did a wipe, then installed gapps. Gapps didn't 'take', but I was able to take care of it through the play store.
Thanks for any help!
RTC.
I think back stock w Odin,in cwm reset data cache as normal ,but in advance format system,& fix permissions,install 10.1 & gapps again,maybe works,T959 have 390mb,custom roms JB have 180mb+80mb gapps+apps cache ect. Im install JB roms and free ram is 60mb-90mb eccept slimbean. Or try another jb kernel with custom features like semaphore,only issue is video camera not work in bigmem(406mb)
Good luck! Im on Trigger/overstock. :thumbup:
Sent from my SGH-T959 using xda app-developers app
juankyhd2 said:
I think back stock w Odin,in cwm reset data cache as normal ,but in advance format system,& fix permissions,install 10.1 & gapps again,maybe works,T959 have 390mb,custom roms JB have 180mb+80mb gapps+apps cache ect. Im install JB roms and free ram is 60mb-90mb eccept slimbean. Or try another jb kernel with custom features like semaphore,only issue is video camera not work in bigmem(406mb)
Good luck! Im on Trigger/overstock. :thumbup:
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I totally spaced out on the kernel. I just updated to the latest semaphore and am ready to go. Things are already MUCH faster.
I never really use the videocamera anyway, so it's not an issue.
Do you think Zram would help at all? Semaphore doesn't have any.
If I get a class 10 external sd card, is there any way to use some of that as ram? If we can do that, it'd breathe new life into the vibrant like WOAH.
Or is there any way to run some of the necessary apps on the external SD card instead of RAM?
Edit: Tried to OC to 110% and the phone started restarting so I disabled that. Now the phone shuts down when it sleeps and the power button doesn't wake it up. I have to pull the battery and restart it. Anyone know why?
Here's the semaphore kernel I flashed:Semaphore_JB_2.9.21v.zip
juankyhd2 said:
I think back stock w Odin,in cwm reset data cache as normal ,but in advance format system,& fix permissions,install 10.1 & gapps again,maybe works,T959 have 390mb,custom roms JB have 180mb+80mb gapps+apps cache ect. Im install JB roms and free ram is 60mb-90mb eccept slimbean. Or try another jb kernel with custom features like semaphore,only issue is video camera not work in bigmem(406mb)
Good luck! Im on Trigger/overstock. :thumbup:
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
What is slimbean by the way? Different rom?
I noticed that there were semaphore kernels for -SV which I guess were for the slim roms?

Categories

Resources