Related
So heres the full history in chrono order
-flashed EE 3.0 from NAND
-applied a2sd update
-bootup two FCs occured: google apps and skype mobile
-once booted i did
adb shell
a2sd cachesd
-everything was good
-set cpu to 864 (why not try it right?)
-Instacrashed
-Battery Pull
-Reboot
-hanging on skateboarding droids
-wiped everything
-reflashed from NAND backup
-apps from market wouldnt download
-couldnt make calls (dialer would dial but if i pressed call it wouldnt do n e thing)
-reboot
-hanging on skateboarding droids
can n e one tell me whats going on?
or did i scramble my eris's brains all over the wall...
should i try flashing EE 4.0?
UPDATE:
did another NAND restore
everything seems to be working.
I haven't flashed the a2sd update yet...
If anyone if facing problems with MiniCM 1.0.0,follow these instructions:
Unable to install- Stuck at the BootAnimation:
1)Goto Xrecovery
Do a Full Wipe - Factory Reset
2)Go to Advanced
Wipe Dalvik Cache
3)In Main Menu,Wipe Cache Partiton
4)Reflash the ROM MiniCM 1.0.0
5)Reboot and use defaults for a while... Then reboot once again and then set your own options(to check if the Default one runs without any issues)
Unable to set frequency in the CM Settings:
1)Goto xrecovery
Do a Full Wipe
2)Install RC2
3)Install SetCPU and set the speeds
Check option to set on boot
4)Reboot once
5)Goto Xrec again
6)Install 1.0.0.0 over the installed RC2(dont wipe or do anything)
7)Once done,reboot and open SetCPU
8)Check Frequencies
9)Goto CM Settings and Performance> CPU
9)Now you can set Frequencies in the CM settings menu
Constant FCs(Force Closes) using any Launcher:
Do not enable any profile in SetCPU
Switch off all other profile options like Screen off,charging etc.
Just use one OC i.e. 710/122 or 729/122 or 748/122
Unable to Install Angry birds:
1)Reboot into xrecovery
2)Wipe Cache Partition
3)Goto advanced
Wipe dalvik Cache
4)Reflash the rom(if it does not work the first time)
5)Install Angry Birds now again from Market
Audio/Video out of sync:
1)Goto Android Market
2)Install lgCamera
3)Goto options
4)Set:
Res to 640x480
Encoder- mp4
Video bitrate- 2 Mbit /1 Mbit
Video Framerate - Auto/30
Audio Codec - AMR_NB
Audio Source- Microphone
4)Even then if you get problems,set source to Camcorder
5)I recommend Not changing Audio Source
For Higher Picture Clarity(in lgCamera app):
Set:
Resolution to 2592x1944
Format to PNG
Takes 10-15 sec to store into PNG and pic quality will be about 1.25-1.5 times better
Its preferred for single shots, for successive shots go for JPEG
LauncherPRO giving problems:
1)Restart phone
2)Set defaults in settings of LauncherPRO
3)Still got any issues, install ADW.Launcher or GOLauncher EX
For Crashes/UnResponsiveness:
Set these in setCPU
Default CPU Freq. 710/122 or 691/122
Profiles, Frequency,Priority:
Screen Off :
245/122
55
Battery < 40%:
600/122
50
Temp. > 40 Degrees:
657/122
55
Charging:
691/122
50
Problems with Audio output:
Use MIUI Player,WinAMP,PowerAMP..
Any other player may also work, never tried...
For a few phones,problem exists even in leaked HoneyComb Music player..
I listen to music 2 -3hrs a day and never found an issue with any of these
TWEAK FOR ARABIC LANGUAGE:
Tweak is here
FOR OTHER PROBLEMS:
1)Try setting SD cache to 3072KB
Try using Lower CPU Freq/OC like 691/657 etc..
Use SetCPU to alter Frequencies rather than CM settings
2)Open the zip file goto to system/lib/modules/ and delete ocx8.ko and uvx8.ko
You can do this with winrar. Then copy zip file and flash again.
Since you cant get to root explorer its the easiest way
In winrar just highlight the files and hit delete
2nd issue helped a few being stuck at bootscreen in the ROM.. .Try it once...
These are all my Observations and the instructions I Followed..
Thanks to a few other people who helped me solve my problems...
SPECIAL THANKS to nobodyatall.. Thanks alot for such a great ROM...
Its a perfect ROM,but a few are unable to sort out a few issues.. So started a small thread..
Please post your solutions also over here,so the problems can be sorted out easily...
what do i do if the phone sticks and reboots while in use
it works fine in powesave mode any other mode it will crash
Zeam launcher 2.9.2 run's great!!
Thanks very usefull for me for camera settings.Thanks again
spinner_w said:
what do i do if the phone sticks and reboots while in use
it works fine in powesave mode any other mode it will crash
Click to expand...
Click to collapse
If that is the case, just set the CPU freq to 691 or 710/122
and enable profiles in Set CPU
Create a profile such that on screen off,it goes to 245/122
and Battery<40% it goes to 600/122
and temp>40 degrees it goes to 657/122
I set to 710/122 after 3 crashes/reboots.. I think it depends on a high setting 748/245
Sent from my X10mini using XDA Premium App
brightness is totally clear only setting to the maximum (100)...why?
Brightness problems... Reflash it again.. Wipe all stats and caches...
Try again... If still having problems,report back... I have never had that issue
@tejagamer--good job.
Hi guys,
This is my first attempt of installing custom rom on my x10 mini. Ok, so here's the deal. I rooted my x10 mini with SuperOneClick, downloaded TItanium Backup and installed BusyBox, then downloaded xrecovery from here:http://forum.xda-developers.com/show...=superoneclick (the newest one also doesn't work) and everything works fine. I restarted my phone, entered xrecovery without any problem, made backup and started installing the custom rom step by step with instruction. After the installation everything looked fine, installation have completed as it should (well I think so ); I also did 'Factory Reset after it, rebooted and from now on my x10 mini restarts all the time, once (it was a miracle probably), I made to the guide screen but after few seconds mobile freezed and restarted, and this happen over and over again. Any help will be appreciate.
Edit: Forgot to mention that my 'mini' meets all the requirements
Edit2: Now I'm trying to install RC2 and have the same problems, idk what to do, I did everything step by step with instructions, and NOTHING! I'm now pissed off a little.
Hey dude....
Follow the Instructions stated above from scratch once..
It will and should work on all devices if it has 2.1.1.A.06 and correct baseband version
Check the first post for the steps...
@sathkartha Thanks dude
I have done this many times and nothing helped, this ****ty mobile is unromable ;/
Try going to 2.1 Stock
Then Goto xrec
Do Full Wipe
then install the rom
and reboot
By restoring or installing clear one from SE?
Edit: OK nevermind I installed clear one from SE
Go to SE rom/Install it
Restart
Wipe all now/Full Wipe
Then try Installing mini CM
Now see if you have any problem..
There are interrupts when I listen to music from stock music player, any solution? Thank you!
Download winamp from market?
If it would solve the problem, yes. Do you think the player is responsible or the rom or overclocking (I have stock settings)?
Thank you!
Check winamp for now
Edit: tejagamer what did you mean by: 5)Reboot and use defaults for a while... Then reboot once again and then set your own options(to check if the Default one runs without any issues), Do I need to use launcher program? or what you meant by defaults?
Fifty2008 said:
Check winamp for now
Click to expand...
Click to collapse
The problem remains..
This ROM features a stable enviroment [the most stable tested by me so far], with the least number of bugs (with 366BB), and probably one of the best performances.
Features: This ROM provides a default Portrait screen, it also has as the stock theme - TouchWizzedB (It looks like the Samsung ROM's, don;t know why i like it)
It features BeatsAudio, Bravia Engine and xLoud,
IIt provides a bootanimation and sound provided by Madhacker.
(if the bootsound is not on and you really want it, enter in terminal enablebootsound)
It also provides as the default launcher - GO Launcher Ex.
You can add [highlight]software[/highlight] capacitive buttons in the taskbar - thanks to nom051205 < Zip below
It was tweaked for daily use.
Skype has not been fully fixed, but i found a workaround, after rebooting, call someone, or a number like 444 then close, it should work, tested multiple times and it worked, i'm going to try and make a script to get rid of this step. (sometimes it works without doing a thing, so i think it is about luck )
Also, skype seems to leave the speaker on after singning out creating a huge battery drain, if you experience this kind of issue please remove your Skype and install this one, then go to advanced settings (in skype) > sound settings > disable sign-in/out sounds and Force speaker off after calls.
With those workarounds provided above, you should have a seamless experience with Skype..
FAQ:Q: Does it have USSD fix/Gapps/Phoenix Kernel?
Yes
Q: Is the WiFi stable?
With 366BB i have no problems with WiFi stability.
Q: Do i have to do a full factory reset if i come from other CM7 ROM?
No, just wipe dalvik cache, full factory reset is a must if you come from DSC/FroYo/Official 2.3.3.
Q: How do i flash 366BB?
You put your device in Fastboot, connect the USB and use a tool provided here or here.
Q: I can't install the ROM! Installation Aborted! (yeah, yeah, this is not a question..)
Open the zip file then you will see a folder, go into the folder, select all (meta.inf; system; boot.img) and re-zip those files and name it LXdroid 0.x.zip then flash it.
Credits to nom051205 for using his post almost copy-paste.
Q: What's wrong with Swype? It just FC's?
Install it manually, this should do the trick, you can find swype.apk in a link below.
Bootsound/Bootanimation Script Commands
Terminal commands for scripts:
enablebootsound - enables bootsound
bootsoundoff - turns bootsound off
bootsoundon - turns bootsound on after being turned off
newbootsound - /sdcard/android_audio.mp3 is copied as new bootsound
newbootanim - /sdcard/bootnanimation.zip is copied as new boot animation
(Probably you need to type su before those scripts, just saying...)
Credits go here.
Note: This is my first ROM, feedbacks and head-ups/tips would be welcomed in order to tweak it further.
--Added Screens for those who want to see something
You can upgrade to higher versions of LXdroid ROM without losing your data, just wipe Dalvik Cache!
LXdroid ROM 0.2 is provided as standalone flashable zip, it doesn't need 0.1 in order to work.
Download link: LXdroid ROM 0.2
Download link LXdroid ROM 0.1 (old, useless, not needed)
Download link swype.apk
Hotfixes for LXdroid 0.2 for Autobrightness FC and xLoud and Bravia permissions found here!
Quick tutorial aka Roadmap to a Custom ROM -Download ADB/Fastboot tools + Drivers from here. (You need to install the drivers before you begin).
-Download MultiRecoveryFlasher from here.
-Download MultiBasebandFlasher from here or download dsp and baseband flasher by n0p and StreakOwner from here.
-Download a custom ROM like DSC (most stable in my opinion), Longhorn or, the one provided here.
Now let's get started for real!
1-Install the drivers.
2-Put your streak in fastboot by turning the phone off and after that powering on by holding down volume + power button.
3-Open MultiRecoveryFlasher and flash StreakMod recovery. Reboot.
4-Put your streak again in fastboot.
5-Open MultiBasebandFlasher and flash 366BB or the script provided alternatively (does the job all by itself ). Reboot.
6-Enter Recovery by turning the phone off and then powering on holding up volume + down volume + power button.
7-Select "Software upgrade via Update.pkg on Sd Card"
8-A Dell logo and an attention will appear, press power button once to show the menu.
9-Hit advanced to mount sdcard via PC, so the SD card will appear in you PC via recovery.
10-Copy the ROM you downloaded to the sdcard (preferably to root).
11-Hit back in recovery, choose install sdcard updade.zip, then choose zip from sdcard, browse for your zip, and hit the camera button then select yes.
12-After the installation is completed, hit back to the main screen of the recovery, and choose wipe data/factory reset, then wipe cache partition, then choose advanced, wipe dalvik cache, wipe battery status.
13-(It is recommended to reboot again and do a factory reset from the dell recovery, White Letters)
14-The system will take some time to boot up, but you are done, enjoy your custom ROM.-------------------------------In my opinion the fastest and easiest way to get a custom ROM--------------------------------------------------
Disclaimer:
This ROM was made primarly for my personal use, it provides elements from all over this Forum, Credits section thanks personally all and i thank more of them that are not listed there, it is based on CM7.2 mdpi by hPa, it has elements from Longhorn and others, as always do a nandroid backup just in case, and don't blame me for ruining your beloved streak, although i don't think you can .
Credits:
The people/teams that inspired me to do this:
-DSC Team / n0p - Kernel and many Tweaks.
-hPA - For porting CM7 to streak.
-Tenorntex - Some tweaks imported from Longhorn, dialing screen theme.
-nom051205 - Soft-Buttons flashable zip
-Madhacker - Bootanimation and sound.
-xda Forum - For a great enviroment, other ideeas and tweaks.
-Google - Great search engine, thanks for the Android OS
-Others
--If you want credits for something i have in my ROM and i forgot about you, please let me know and i will update this --
Changelog:
0.3 - TBA
0.2 - 21 august 2012 - skype seems to be fixed, needs more testing, further improved performance, added BeatsAudio, Bravia Engine, xLoud, added stock Swype keyboard, bootsound enabled by default, disabled USB Debugging icon from Status Bar, (only the Icon, debugging remains enabled), maybe more - Kernel: DSC Phoenix Kernel Test 4
0.1 - 20 august 2012 - First release, good performance, things that work on all CM7 ROM's work on this one, things that don't work in all CM7 ROM's don't work in this one. - Kernel: DSC Phoenix Kernel Test 4
I guess it has fixed CM settings (like setting cpu frequency from within the settings and fixed lockscreen on 160 or 180 ??
jitin02 said:
I guess it has fixed CM settings (like setting cpu frequency from within the settings and fixed lockscreen on 160 or 180 ??
Click to expand...
Click to collapse
You can see the CPU settings, freq's and governors but you can't change them from the CM settings, i've included AnTuTu CPU Master Free in the ROM, and the locksreen it works fine on Ring and Lense, Rotary and Sliding Tab are small and aligned to the left. so i would say that no, it doesn't have them fixed as i didn't needed them, but maybe i will look into it.
Personally i use Ring Style at lockscreen and dial screen, with one ring only at lock and the default Freqs (128-998 mhz , Conservative).
Lexmazter said:
You can see the CPU settings, freq's and governors but you can't change them from the CM settings, i've included AnTuTu CPU Master Free in the ROM, and the locksreen it works fine on Ring and Lense, Rotary and Sliding Tab are small and aligned to the left. so i would say that no, it doesn't have them fixed as i didn't needed them, but maybe i will look into it.
Personally i use Ring Style at lockscreen and dial screen, with one ring only at lock and the default Freqs (128-998 mhz , Conservative).
Click to expand...
Click to collapse
if u can look into it i will be thankfull to u as i had to go back to froyo 351. b'coz of DSC wifi issue .
Thanks and is there no way to resolve cm settings frequncy issue:silly:
jitin02 said:
if u can look into it i will be thankfull to u as i had to go back to froyo 351. b'coz of DSC wifi issue .
Thanks and is there no way to resolve cm settings frequncy issue:silly:
Click to expand...
Click to collapse
You can use alternative software, as i mentioned, there is SetCPU or CPU Master Free, and CPU Master doesn't stay always on in RAM and you can set it to Set frequencies on boot
I think that CM frequiencies support must be added from the kernel, so i don't think i can do something about it
jamo59
Hello!
I like the ROM!
Only the Longhorn 2.9.1 Quadrant 2300 points for that!
The LXdroid only 0.1 points in 1408.
Well, it's a huge difference.
Test Battery, but the IGO primo 9 to be strong!
This looks like a very fast everything works properly (from my experience it!)
jamo59 said:
Hello!
I like the ROM!
Only the Longhorn 2.9.1 Quadrant 2300 points for that!
The LXdroid only 0.1 points in 1408.
Well, it's a huge difference.
Test Battery, but the IGO primo 9 to be strong!
This looks like a very fast everything works properly (from my experience it!)
Click to expand...
Click to collapse
I made this ROM without testing Quadrant,i never trusted that benchmark , i tested with AnTuTu Benchmark and it is not a big difference from Longhorn to LXdroid, i still need to tweak something more, but the overall feel is smooth as butter in my experience and the battery life is just great for me.
jamo59
Whew!
Now, I see no Google Talk?
Even I test!
jamo59 said:
Whew!
Now, I see no Google Talk?
Even I test!
Click to expand...
Click to collapse
You can download it from Google Play (Market), i don't use it so i didn't included it
jamo59 said:
Whew!
Now, I see no Google Talk?
Even I test!
Click to expand...
Click to collapse
I think you're really really fast IGO is not there!
Longer certainly really deserves a try!:good:
SKYPE ??
so what about skype, is it working ??
MadHaker said:
so what about skype, is it working ??
Click to expand...
Click to collapse
I'll tell you! I'm also interested!
Time!
MadHaker said:
so what about skype, is it working ??
Click to expand...
Click to collapse
I'm testing it now , i'l report back later.
EDIT: Not working...checking for a fix...
Lexmazter said:
I'm testing it now , i'l report back later.
Click to expand...
Click to collapse
Not ok! (skype)
Lexmazter said:
I'm testing it now , i'l report back later.
EDIT: Not working...checking for a fix...
Click to expand...
Click to collapse
i am sorry to say that any rom above 2.3.3 usually have problem with voip and there are no fixes for it at the moment...
deysmacro said:
i am sorry to say that any rom above 2.3.3 usually have problem with voip and there are no fixes for it at the moment...
Click to expand...
Click to collapse
Yeah, you said it, "at the moment"
jamo59 said:
Not ok! (skype)
Click to expand...
Click to collapse
Hello there!
If anyone has not read it, the good must be so skype has stopped working, that:
1, restart
2, the recording is started and is ready to.
3, visszahallgatod
4 to start the skype
5, a voice recorder pick up service.
6, to listen
7, glad it works!
jamo59 said:
Hello there!
If anyone has not read it, the good must be so skype has stopped working, that:
1, restart
2, the recording is started and is ready to.
3, visszahallgatod
4 to start the skype
5, a voice recorder pick up service.
6, to listen
7, glad it works!
Click to expand...
Click to collapse
Can you be more specific, i don't really understand what you are trying to say here
Lexmazter said:
Can you be more specific, i don't really understand what you are trying to say here
Click to expand...
Click to collapse
2nd that ;0)
CyanogenMod 10.2 for P768
CM 10.2 has reach state. So I update this rom and I'm moving my CM repo to CM 11 now.
This is an unofficial CM 10.2 build from source with original omap kernel (3.0.31-CM+). Please flash at your own risk. I've tested on my P768f so it should work on all L9 P768 phone.
Only for P768 phone with Unlocked bootloader!
Camera & Gallery don't work without sdcard, please flash sdcard emulate patch to fix it
Click to expand...
Click to collapse
Features
Original Kernel 30.0.31 CM+ for OMAP board.
Jellybean 4.3.1
Swap internal/external sdcard / Disable sdcard emulate / Emulate sdcard via Aroma installer option
Home button wake phone (you can disable this in Display setting)
Reduce headset volume and increase speaker volume
OC - 300, 600, 800, 1008, 1200 Not OC by default, must select max 1200 in Performance menu
UV - 925, 1075, 1175, 1275, 1350
Add SIO, SIOPLUS, FIFO, ROW and VR I/O scheduler
Add sanjose, lazy, interactiveX, ondemandx, pegasusq, adaptive, adaptivex, smartass2, zenx and abyssplug CPU Governor
UMS (external), MTP (internal/external) and PTP all work, default to UMS, you can select MTP/PTP from "System Setting" > "Storage" > "Usb computer connection", I suppress old ICS UMS dialog so don't panic when it open and then suddenly close itself (no better solution for now, I do this because I don't want anyone to open it and press USB connect button. It'll unmount sdcard). <-- Don't add this fix, so don't bother with ICS UMS mount dialog.
How to install
Download rom and put it in sdcard.
Download Google Apps for CM10.2 and put it in sdcard.
Boot into recovery and Clear cache, dalvik cache and format /system. (Full wipe is recommended but not required if you came from CM 10.2)
Flash rom, then flash Google Apps.
Flash sdcard emulate patch at this point if you don't have sdcard (Skip this if you have sdcard)
Reboot.
After reboot if your gps doesn't fix properly please use FasterGPS to change gps config to your region
Download Link
2013/12/07
cm-10.2-20131206-UNOFFICIAL-p768.zip md5:24c54c3cf77f69604d83dd130fd40a6a
Bugs / known issues
CM 10.2 bugs
1080 video recording not work
Camera will not work if no sdcard in phone, please select emulate internal sdcard from installer
Version History
2013/12/07 - Fix sound record volume is too low - Thanks Artas182x
2013/12/05 - Update to CM 10.2
2013/11/28 - Update to CM 10.2 RC1
2013/11/21 - Bug fix
Fix bluetooth audio
Calling volume adjust
GPS config update
Disable Scissor renderer for SGX540
2013/11/17 - Update to CM 10.2 M1
2013/09/28 - Add kernel mod
OC - 300, 600, 800, 1008, 1200 Not OC by default, must select max 1200 in Performance menu
UV - 925, 1075, 1175, 1275, 1350
Add SIO, SIOPLUS, FIFO, ROW and VR I/O scheduler
Add sanjose, lazy, interactiveX, wheatley, ondemandx, pegasusq, adaptive, adaptivex, smartass2, zenx and abyssplug CPU Governor
UMS (external), MTP (internal/external) and PTP all work, default to UMS, you can select MTP/PTP from "System Setting" > "Storage" > "Usb computer connection", I suppress old ICS UMS dialog so don't panic when it open and then suddenly close itself (no better solution for now, I do this because I don't want anyone to open it and press USB connect button. It'll unmount sdcard).
Bugs
Camera will not work if no sdcard in phone
2013/09/16 - Initial release
Original Kernel 30.0.31 CM+ for OMAP board.
Jellybean 4.3
Swap internal/external sdcard + access sdcard via MTP
Home button wake phone (you can disable this in Display setting)
Reduce headset volume and increase speaker volume
Bugs
Camera will not work if no sdcard in phone
Credits
Cyanogenmod for ROM and P760 device tree which I modified it to P768
AntonX for serveral bugs fix.
artas182x for default sound profile values
HOW TO
Flash over last version
You can flash new version over old version
Put rom & gapps for CM10.1 in sdcard
Boot to recovery
Wipe cache & dalvik cache
Flash rom & gapps
Reboot
Flash this ROM over CM10.1
Put rom & gapps for CM10.2 in sdcard
Boot to recovery
Wipe cache & dalvik cache
Flash rom & gapps
Reboot
Enable OC, change I/O scheduler and change CPU governor
You need to enable developer mode on your phone, do it by
Goto "System Setting" > "About phone" > Tap 7 times on "Build number". You're now enable developer mode.
Goto "System Setting" > "Performance"
Enable OC by select "Processor" and set "Maximum CPU frequency" to 1200
You can also change CPU governor in that page, about what is it please refer to http://forum.xda-developers.com/showthread.php?t=1792369 and http://translate.google.com/transla...013/01/governor-scheduler-tcp-bejegyzest.html
You can change IO scheduler in "I/O scheduler", please read about it at https://www.vincentkong.com/wiki/android/android-io-schedulers/
Please test all changes before select "Set on Boot" because if something go wrong you can reboot your phone to revert it.
Cannot connect to wireless access point
This problem mostly occur when you got some error at first boot. The problem is error interrupt startup service to write proper MAC address data to file. Your wifi mac address will be 00:00:00:00:00:00
Use file manager or adb to delete /data/misc/wifi folder from your phone
Reboot (disconnect usb cable to make sure there're no error at startup)
Great, gonna test and report later.
EDIT: Reporting
Bugs:
1-CyanogenMod account remote wipe does not work, nothing happens. Location works fine btw.
2-When downloading (eg an app from market) under wi-fi, it eats all the connection. I cannot download another thing or visit a web for a couple of seconds. Sometimes it gives a time out error, other times takes a while to start to download. If you dont download many things simultaneously you wont notice this. This could a problem with my router, but i dont recall this happening before with my old Defy.
3-ADB wont work on Windows 8 x64 for me, tried different drivers but LG E2 USB device never gets installed correctly.
4-GPS can only see 2 sat and never locks position.
N°2, 3 and 4 are bugs that i experienced also on the p760 version of CM10.2
Aside from those bugs, everything else seems to work perfectly, great work.
So how is 10.2 over 10.1.3? I'm using 10.1.3 and having no issues, I find the battery life to be slightly less than stock, mainly when 3G data is left on. I've disabled location access via 3G and WiFi and that has helped a little, Google Now is off also.
Is the battery life any better on 10.2? I found going from 4.2 to 4.3 on my nexus 7 to gave no benefits.
Also, to prevent posts in this thread of people getting security errors, I think it would be a good idea to link the bootloader unlock guide in the OP.
Sent from my LG-P768 using xda app-developers app
donk165 said:
So how is 10.2 over 10.1.3? I'm using 10.1.3 and having no issues, I find the battery life to be slightly less than stock, mainly when 3G data is left on. I've disabled location access via 3G and WiFi and that has helped a little, Google Now is off also.
Is the battery life any better on 10.2? I found going from 4.2 to 4.3 on my nexus 7 to gave no benefits.
Also, to prevent posts in this thread of people getting security errors, I think it would be a good idea to link the bootloader unlock guide in the OP.
Sent from my LG-P768 using xda app-developers app
Click to expand...
Click to collapse
My battery life on 10.1.3 is better than stock (3G on) after use it for a while. After flash CM I notice that first day my battery life is not good as I expected. So I install cpu spy and wakelock detector to see what the problem. My phone don't go to deep sleep mode and that because of some apps (Line, Google keep, ...). I try to use it for a few day and the deep sleep problem gone, don't know why. The battery life is good when my phone enter deep sleep when I don't use it.
mato_d007 said:
Great, gonna test and report later.
EDIT: Reporting
Bugs:
1-CyanogenMod account remote wipe does not work, nothing happens. Location works fine btw.
2-When downloading (eg an app from market) under wi-fi, it eats all the connection. I cannot download another thing or visit a web for a couple of seconds. Sometimes it gives a time out error, other times takes a while to start to download. If you dont download many things simultaneously you wont notice this. This could a problem with my router, but i dont recall this happening before with my old Defy.
3-ADB wont work on Windows 8 x64 for me, tried different drivers but LG E2 USB device never gets installed correctly.
4-GPS can only see 2 sat and never locks position.
N°2, 3 and 4 are bugs that i experienced also on the p760 version of CM10.2
Aside from those bugs, everything else seems to work perfectly, great work.
Click to expand...
Click to collapse
All that bugs come from CM 10.2, I just build it for those who want to test. I'll rebuild it again in a week or so to add any bug fix from CM (if any).
For GPS there're some people in P760 thread posted that it work with some fix. I don't test it yet.
donk165 said:
So how is 10.2 over 10.1.3? I'm using 10.1.3 and having no issues, I find the battery life to be slightly less than stock, mainly when 3G data is left on. I've disabled location access via 3G and WiFi and that has helped a little, Google Now is off also.
Is the battery life any better on 10.2? I found going from 4.2 to 4.3 on my nexus 7 to gave no benefits.
Also, to prevent posts in this thread of people getting security errors, I think it would be a good idea to link the bootloader unlock guide in the OP.
Sent from my LG-P768 using xda app-developers app
Click to expand...
Click to collapse
In my case is like artit says, better battery life than stock (tough i use mostly wi fi and a bit of 3G), on deep sleep it only eats about 1% per hour, about 10.1.3 i dont see many diferences tbh, both of them works fine on our devices luckily. The battery life with the screen on all the time (playing games, surfing, messaging, etc) its 5 hours approx. Without touching it on deep sleep you can reach 24+ hours. Forgot to mention that i use many accounts (FB,G+, LINE, whatsapp, Skype, Cyano, Twitter) and i have auto sync activated always. Its a very good rom a good daily driver if you dont care much about the gps problems.
artit said:
All that bugs come from CM 10.2, I just build it for those who want to test. I'll rebuild it again in a week or so to add any bug fix from CM (if any).
For GPS there're some people in P760 thread posted that it work with some fix. I don't test it yet.
Click to expand...
Click to collapse
Yeah like i said, i experienced those bugs previously on the p760 version but i reported them here so everyone can see them. Thanks for taking the time to build this version.
I tried the suggested fix for GPS bug (modify the gps.conf file) but sadly, it didnt helped in my case.
Thank you for the replies guys. Ill try what you suggested about wakelock checking and using CPU spy, I'm sure I need to turn off a few Google apps or at least their syncing.
I'll try out this 10.2 version once I have everything fully setup to my liking on 10.1, then I can make a backup and switch back if needs be.
I wasn't aware of a GPS problem, but to be honest, I don't really use GPS.
Sent from my LG-P768 using xda app-developers app
Hey, how did you get the camera to work in CM10? Thanks
Sent from my LG-P760 using xda app-developers app
aloy99 said:
Hey, how did you get the camera to work in CM10? Thanks
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
I replaced /system/vendor/firmware/ducati_m3.bin from P768 ICS stock rom.
artit said:
I replaced /system/vendor/firmware/ducati_m3.bin from P768 ICS stock rom.
Click to expand...
Click to collapse
I thought you said it only work with stock ROMs and not CM based ROMs?
EDIT: I found your patch, thanks a bunch
Sent from my LG-P760 using xda app-developers app
I seem to be haivng a problem keeping 10.2 installed. I have tried a clean install by wiping all directories but external_SD, and then installed 10.2, then gapps, then wiped caches and booted. I can boot up and use the phone fine but as soon as I turn it off, it just gets stuck on the LG logo on the bootup. I have tried fixing permissions and rewiping caches. I have also tried to go from 10.1 to 10.2 without data wiping and I get the same results, great first time round, doesnt boot after switching off. I have also tried full wipes, then install CM + GAPPS, then advanced restore just data from 10.1 then wipe caches then boot. Again with the same results!
Does anyone have any suggestions to keep CM10.2 working for me? (Other than never switching it off )
Thanks, donk165
donk165 said:
I seem to be haivng a problem keeping 10.2 installed. I have tried a clean install by wiping all directories but external_SD, and then installed 10.2, then gapps, then wiped caches and booted. I can boot up and use the phone fine but as soon as I turn it off, it just gets stuck on the LG logo on the bootup. I have tried fixing permissions and rewiping caches. I have also tried to go from 10.1 to 10.2 without data wiping and I get the same results, great first time round, doesnt boot after switching off. I have also tried full wipes, then install CM + GAPPS, then advanced restore just data from 10.1 then wipe caches then boot. Again with the same results!
Does anyone have any suggestions to keep CM10.2 working for me? (Other than never switching it off )
Thanks, donk165
Click to expand...
Click to collapse
I don't use this rom recently and build it only for testing so there may be bugs. I'll try to reproduce your issue and update source from CM to see if it's fixed.
IMO, stable version is more suitable for daily use. That's why I focus on stable version because I don't want to build CM nightly every 2-3 days.
donk165 said:
I seem to be haivng a problem keeping 10.2 installed. I have tried a clean install by wiping all directories but external_SD, and then installed 10.2, then gapps, then wiped caches and booted. I can boot up and use the phone fine but as soon as I turn it off, it just gets stuck on the LG logo on the bootup. I have tried fixing permissions and rewiping caches. I have also tried to go from 10.1 to 10.2 without data wiping and I get the same results, great first time round, doesnt boot after switching off. I have also tried full wipes, then install CM + GAPPS, then advanced restore just data from 10.1 then wipe caches then boot. Again with the same results!
Does anyone have any suggestions to keep CM10.2 working for me? (Other than never switching it off )
Thanks, donk165
Click to expand...
Click to collapse
I can't reproduce your issue. Umm... struct at LG logo, it's seem that there're something wrong about kernel or initialization files. What steps you did to get that problem?
I do following
- CWM back my CM 10.1.3 RC2 (I did it last week)
- Reboot to recovery
- Do full wipe, cache, dalvik cache, user data/factory reset then format /system (in mount/unmount menu)
- Install CM 10.2
- Install GApps for CM 10.2, gapps-jb-20130813-signed.zip **** Not the same as for CM 10.1
- Reboot
- Login to CM account & google
- Install some app
- Do 2-3 reboot without problem
Then I test restore data from CM 10.1.3 RC2
- Reboot to recovery
- Advance restore from external sdcard
- Restore /data
- Reboot
- Re-login to CM account
- Phone work fine, but first reboot is longer than normal.
- Try to reboot 1-2 times, no problem.
Did anyone get this problem as donk165?
New build is up. I also include some kernel mod from my CM 10.1.3 for P768 rom and a sdcard re-enable patch for those that has no sdcard.
GPS work but took a long time. I'm not on this rom just test it and flash other one. If you have issue you can post here.
Re-upload latest release because it has minor error for UMS on windows. I fixed it now.
Do i is Necessary overclock to 1200?But i not want to overclock.i just set to 1008.
speed processor That is 2 dual 1024.
Is there a problem ?
bahram360 said:
Do i is Necessary overclock to 1200?But i not want to overclock.i just set to 1008.
speed processor That is 2 dual 1024.
Is there a problem ?
Click to expand...
Click to collapse
You don't need to OC, this rom default max frequency is 1008. If you don't want to OC just leave the value stay at 1008.
for save battery on this rom What I do?
and if overclock for always this will damage?
bahram360 said:
for save battery on this rom What I do?
and if overclock for always this will damage?
Click to expand...
Click to collapse
No need to do anything to rom configuration because it's a little bit Under Volt (UV) as I state in OP. It's should use less battery than official configuration.
If you still have battery drain problem, it almost come from phone not go into deep sleep mode. There're some app in your phone that keep phone awake. To find out what that app is, you can install "WakeLock detector" along with "CPU spy" to see if you phone goto deep sleep while screen off (CPU spy) and if not what is the problem (Wakelock detector).
For OC I don't use it but it shouldn't damage our phone. I also don't OC GPU because there're no preference for user to disable it.
I still can't get this Rom to stay booting. I can boot up after the install but once I reboot, it gets stuck on the LG logo. TWRP still works though so I can save my phone. But 10.2 doesn't like my phone. Its weird because 10.1 is fine.
My nexus also died when I put 4.3 on there, maybe 4.3 just doesn't like me lol.
Sent from my LG-P768 using xda app-developers app
Hi Everyone,
Moved to Dirty Unicorns v9.8 (5.1 Lollipop) as my daily driver and just wanted to give general install instructions that worked for me so you don't have the same issues.
(1) Downloads: ROM: http://forum.xda-developers.com/galaxy-note-3/orig-development/rom-dirty-unicorns-v9-0-t3006601Gapps: https://github.com/cgapps/vendor_google/tree/builds/arm Optional: Xposed: http://dl-xda.xposed.info/framework/sdk22/arm/
Note: Open gapps caused AOSP keyboard force close error that prevented doing anything so suggest installing the one from the link
(2) Boot into TWRP
(3) Wipe everything except external storage (assuming you put ROM and Gapps on external storage; if you do not have external storage suggest wiping system, data, cache, and dalvik)
(4) Install ROM, then Gapps, and then Xposed (optional)
(5) Restart and then should start up in less than 5 minutes
Other notes:
(1) To get adaway to work needed to follow the guide on the last post: http://goo.gl/9StE1z
(2) By default, long press home does nothing; that can be changed in the "Button" menu which is a sub menu in the "Dirty Tweaks" settings
(3) Found the nightmare CPU governor is the most stable for overclocking and have been running stable at 2.803 GHz (but have only tested for a few hours; if you do not want to overclock seems like kernel is stable with all governors)
(4) Found some issues switching between wifi and LTE (LTE would stop working) changed congestion algorithm to cubic and seems to be working better now, though unsure of root cause
Links are broken :/
woops, sorry; looks like I violated some sort of terms of service of Google's URL shortener. Updating with non shortened links now.