hi guys,
currently running a cm7 install, i dropped the ACMEInstaller into a new folder on the hp touchpad called "cmsetup", restarted it, held the volume up button as the screen turned off and the pad is jin usb mode, but my pc doesnt detect the palm (webos) device. so i can't run the novacom command. i've had a look in devices and printers and it has a yellow exclamation mark next to the device (palM) i've tried troubleshooting it with no joy.
any ideas on how i can get my pc to pick it up when its in usb mode after the device restart
thanks in advance...
Hey bro I feel your pain but you might try posting this in the other HP Touchpad forum to get some help with this issue. Just don't select the WebOS option in the top right corner just HP Touchpad. I did the install myself last weekend with no problems. There's some smarter people over there than me. Good luck.
Thread moved to proper forum.
HPTOUCHWIZ said:
hi guys,
currently running a cm7 install, i dropped the ACMEInstaller into a new folder on the hp touchpad called "cmsetup", restarted it, held the volume up button as the screen turned off and the pad is jin usb mode, but my pc doesnt detect the palm (webos) device. so i can't run the novacom command. i've had a look in devices and printers and it has a yellow exclamation mark next to the device (palM) i've tried troubleshooting it with no joy.
any ideas on how i can get my pc to pick it up when its in usb mode after the device restart
thanks in advance...
Click to expand...
Click to collapse
i think u should take a look a "reverendkjr's channel" on youtube
Related
I was having issues getting my Touchpad to upgrade to 3.0.4 via Webos Dr. Every time it would get to a certain percent (maybe 40% maybe 80%) then give error "We were unable to reset your device. So I closed it restated the Touchpad and repeated.
I tried to just recover to 3.0.2 and the same thing. I tried a different computer same think.
The last time I tired the Touchpad shut down and wont boot to recovery.
I have it plugged into my computer and if I hold Power+Middle bottons I can hear my computer detect it but nothing happens.
Please Help!!
I have been trying what is discussed in this thread.
http://forum.xda-developers.com/showthread.php?t=1381564
Bump update. When plugged in to PC Device Driver shows Touchpad as QHSUSB_DLOAD and sometimes Palm? What does this mean
Phillip Fry said:
Bump update. When plugged in to PC Device Driver shows Touchpad as QHSUSB_DLOAD and sometimes Palm? What does this mean
Click to expand...
Click to collapse
It means call HP Tech Support.
EDIT:
It means to call HP because you need to send the device to them for repair. Sorry.
Have u installed android? QHSUSB is the "Qualcomm HS-USB Diagnostics".
When the touchpad is installed as "Palm" try the "ACME Installer" method.
I tried looking around all over for a solution. Initially, I updated webOS to the latest version, and installed Android CM7 3.5 to check it out, and everything worked out fine. Installed the .zip to get the Marketplace fix, and next reboot I noticed when plugged in the Touchpad wasn't recognized that it is connected to my computer. Couldn't get the USB connection on in notification tray, unless there's something else I have to do to bring it back.
I went back into webOS, same thing. Rebooted many times, power on + volume button, big USB logo, nothing happening. I may of made a bad mistake here, I performed a full reset in webOS but Android still works fine and asks me what system I want to boot into when I turn on the device.
Anyone have any ideas what I can do to fully restore my device? I am kind of lost because all the solutions I've seen on the web involve the touchpad being connected to the PC and transferring things to it. When I hold the power button and volume up and get the big USB icon, Windows says the device can not be recognized, one of the usb devices has malfunctioned.
Thanks so much in advance.
Got a similar problem. Windows shows me the Device as removable storage, but when I click on it it says "please insert a disk"... Same in webOS and Android.
Edit: Nevermind, the good old "have you tried turning it on and off again" worked. (Desktop).
Check your pc and ensure you have the novacom drivers installed. Novacom is used to access the touchpad when connecting to the pc. Without it, the pc cannot see the touchpad.
Sent from my Touchpad using Tapatalk
Novacom drivers are definitely installed, I used them to install CM7.
Hi,
i have problem with my Novo 7 Paladin. One week ago i installed Google Maps update. After that my tablet was very strange. Sometimes when it go to sleep it won't wake up. I had to press power on again. Later that week there was some graphical glitch on screen (blinking colors). And now i can't boot at all. So i tried the SD card method to recover system. The problem is that i can't boot. Combination of keys like VOL+ and POWER or VOL+ and RESET doesn't work. Then i tried the original USB Boot Tool from Ainol. This tool doesn't work either.
USB Boot Tool
1) install correct USB drivers (press VOL+ and plug USB)
select drivers from tool/drivers/4770
2) unplug USB and start USBBootTool.exe
3) press VOL- and plug USB
4) it says BOOT... please waite0% (attachment boottool.JPG)
5) after some time of waiting the error apears (attachment boottool2.JPG)
Can someone help me please?
Great, so I can throw it away!
ErrorTM said:
Great, so I can throw it away!
Click to expand...
Click to collapse
First try to recharge it overnight, then push power button and see what happens. Anything shown on the screen?
lenik said:
First try to recharge it overnight, then push power button and see what happens. Anything shown on the screen?
Click to expand...
Click to collapse
Tested, same result.
when you connect your tablet to the PC, do you see any devices appear/disappear?
if you use linux, try lsmod (LSMOD lowercase) to see if your tablet shows on the list.
lenik said:
when you connect your tablet to the PC, do you see any devices appear/disappear?
if you use linux, try lsmod (LSMOD lowercase) to see if your tablet shows on the list.
Click to expand...
Click to collapse
I'm using Windows XP. Yes it appears in devices and install drivers.
ErrorTM said:
I'm using Windows XP. Yes it appears in devices and install drivers.
Click to expand...
Click to collapse
If it appears in devices, it's not completely dead. I don't have enough windows experience, but other people had occasional success installing correct drivers and reflashing the device using Ingenic USB Boot Tool or something like that. If the reflash process does not start, most probably it's because you have installed incorrect drivers.
lenik said:
If it appears in devices, it's not completely dead. I don't have enough windows experience, but other people had occasional success installing correct drivers and reflashing the device using Ingenic USB Boot Tool or something like that. If the reflash process does not start, most probably it's because you have installed incorrect drivers.
Click to expand...
Click to collapse
I am willing to install Linux if you think it could help.
I found xburst-tools, which i think is for flash my tablet. I used Ubuntu live distribution. Problem is that i cant even install prerequisities like libconfuse0. I dont know how to install it. Sorry im newbie in linux.
My nextbook next2 turns on then gets to the abraham lincoln screen and keeps rebooting the abraham lincoln screen. When i try to get into recovery mode my pc makes 3 beeps and nothing happens. i looked in the device manager and it shows unknown device but it cannot find the drivers and the next 2 does not light up with any screen. I dled the rkbatchtool 1.3 and the device does not show up in it.
My question is? Is my nextbook fried or can i get into recovery mode another way? Or does anyone have any ideas?
i fixed it
gunz1 said:
My nextbook next2 turns on then gets to the abraham lincoln screen and keeps rebooting the abraham lincoln screen. When i try to get into recovery mode my pc makes 3 beeps and nothing happens. i looked in the device manager and it shows unknown device but it cannot find the drivers and the next 2 does not light up with any screen. I dled the rkbatchtool 1.3 and the device does not show up in it.
My question is? Is my nextbook fried or can i get into recovery mode another way? Or does anyone have any ideas?
Click to expand...
Click to collapse
First off i have win 7 pro 32 bit
i dled RK2818 Android Upgrade Tool_v1.23 googled
I added the driver from this in device manager to unknown device it found rockusb device
i dled _NEXTBOOK 2 ROM ONLY_____________________________________
special thanks to delimeat52
first post of the next2 closed thread
i followed directions and pushed on right side arrow while plugging in usb to pc finally RKAndroidBatchUpgrade first number 1 appeared green and i updated to the nextbook 2 rom image file good luck
My Pc will not find the device via usb though, atleast its working can do stuff with the sd card now and explorer
Hello friends
I have an asus k004 ME371MG, it happens that it no longer has the droid boot, there is no way to do the recory or hard reset by sd card in download mode, I already tried using AFT
when connecting the tablet to the charger or via usb the "welcome asus" screen appears on the screen and then a usb logo appears with a question mark. It happens that he only recognizes the usb as the name of medfieldXXXX, I use Windows 10 64 bits, I would like a specific help for my model, his software comes in RAW mode, very different from the others ... anyone can help me in this sense . thank you. I use it in Brazil ... I am a Dentist, but with advanced knowledge in computer science. I tried several tutorials here in the forum. if anyone has help how to help thanks!