Any Fixes?
I have issue with stock ROM with my M250K, which not support 802.1x at all. after flashing Villain 1.4, I can connect to 802.1x network in both office and home APs.
Ahh.... I remember getting around these issues by manually editing wpa_supplicant on my Hero... those were the days
Thanks for the reply.
on stock too. Want to try to get a feel of the stock ROM 1st since i've just bought it for few days.
Micksta said:
Ahh.... I remember getting around these issues by manually editing wpa_supplicant on my Hero... those were the days
Click to expand...
Click to collapse
i've tried manually editing it and also using the wifi advanced configurator from market. i've also installed the network .cer with no luck.
Hi guys,
Apologies if there is an answer to this anywhere else on XDA but I had a decent look and was unable to find one.
I recently installed the MIUI mod as per the instructions here: http://forum.xda-developers.com/showthread.php?t=1079150
The mod looks great and I did not encounter any problems with the install however I now cannot connect to wifi. After entering in the passkey under wifi settings it simply goes through the cycle over and over of:
Connecting.... Obtaining IP address.... Disconnected.... Connecting.... etc.
Anybody know of a solution?
Thanks
I also had similar issues.. It will connect but frequently drop and while connected, the speed is ridiculously slow.. I wish i could find a solution.. 3g speeds are great and its not the wifi network causing the problem..
Sent from my HTC Sensation 4G using XDA App
this happens to me with my router netgear (is a router issue). i need to reboot router in order to reconnect my defy to wifi. If you doesn't solve try to install latest miui.us 1.8.5, is newest and stable
Just installed 1.8.5 and still no dice. I am also going through a Netgear router so that may be the issue however reboot did not fix the problem for me.
Update:
Currently logged on to wifi at work with no problems at all so it must have something to do with the router. Is there anyway I can counter this by forwarding the IP address through a port or something?
Interestingly, I am also having the same problem with my bluetooth. My car stereo has bluetooth for hands free and I can instantly pair with this device but cannot connect to it. It again just gets stuck in a "Connecting...." loop but is never able to finish connecting.
Am I missing something simple or should I just give up on MIUI for the moment in favour of something else such as CM7...
I just updated my Desire and same issue.. any solurions?
Give CM7 A try... wait for a while... there will be an RC update with 2.3.5
Sent from my MB525 using XDA Premium App
xapamercury said:
I just updated my Desire and same issue.. any solurions?
Click to expand...
Click to collapse
same here with Google nexus one
same here
i flash miui on my moto defy
you have tried the 2.3.5a stable? has no problem
It might have something to do with the base Android system you had before. I've read that flashing the Nordic sbf, then rooting it, full wipe (factory reset, cache, dalvik) and then install might fix your issues.
Sent from my MB525 using XDA Premium App
I had the same problem with CM7 RC1 (RC0 worked), with Barebones Froyo and now with MS2Ginger... It connects to the router...but the internet speed is really slow... I changed the router to G mode and nothing.
With MIUI 1.8.5 my wifi worked ok...
Hi,
Like many others I've had issues with WiFi staying connected since using the jellybean leaks. I had the same with CM10, but if I go back to a stock ICS rom then it works fine. if I reverted back to any jellybean rom then again it will not stay connected.
For me the issue is fixed by change the security on the router from WPA/WPA2 auto to just WPA. With this it connects every time. If I set my router to use WPA2 then again it drops all the time, so it would seem that is has an issue with WPA2.
Maybe others want to give this a test to see if it works for them. Currently I am using DLH6 stock leak.
Maybe this has been posted elsewhere but I thought I would share my findings.
Cheers.
Not working for me. Wifi drops when I move away from the router
Linnyuk said:
Hi,
Like many others I've had issues with WiFi staying connected since using the jellybean leaks. I had the same with CM10, but if I go back to a stock ICS rom then it works fine. if I reverted back to any jellybean rom then again it will not stay connected.
For me the issue is fixed by change the security on the router from WPA/WPA2 auto to just WPA. With this it connects every time. If I set my router to use WPA2 then again it drops all the time, so it would seem that is has an issue with WPA2.
Maybe others want to give this a test to see if it works for them. Currently I am using DLH6 stock leak.
Maybe this has been posted elsewhere but I thought I would share my findings.
Cheers.
Click to expand...
Click to collapse
Confirmed here.
Im using a beta version of Omega v15 based on DLH6.
I could not connect to wifi no matter what I did.
tried router reboots, changing wifi channel etc.
The status when connecting showed:
- Authenticating (normal)
- Obtaining IP Address (normal)
- Saved, Secured (should show connected)
This repeats several times, before eventually the status shows
Network disabled. Poor connection.
I then tried configuring static IP
This time it connects for a fraction of a second then disconnects and instead of the message 'Network disabled. Poor connection', now it shows:
'Temporarily avoiding poor connection'
I then tried installing different kernels - no improvement.
The only solution that worked was configuring network as WPA only.
haenraets said:
Not working for me. Wifi drops when I move away from the router
Click to expand...
Click to collapse
Have you tried to forget the network and add it again after changing to WPA?
Linnyuk said:
Have you tried to forget the network and add it again after changing to WPA?
Click to expand...
Click to collapse
not good solution we need wpa2...
until is not decryption.....
by
kikan
Linnyuk said:
Hi,
Like many others I've had issues with WiFi staying connected since using the jellybean leaks. I had the same with CM10, but if I go back to a stock ICS rom then it works fine. if I reverted back to any jellybean rom then again it will not stay connected.
For me the issue is fixed by change the security on the router from WPA/WPA2 auto to just WPA. With this it connects every time. If I set my router to use WPA2 then again it drops all the time, so it would seem that is has an issue with WPA2.
Maybe others want to give this a test to see if it works for them. Currently I am using DLH6 stock leak.
Maybe this has been posted elsewhere but I thought I would share my findings.
Cheers.
Click to expand...
Click to collapse
Here's my fix go back to ics
I get absolutly no connection.. :crying:
From what I've read these tips might also help:
- Change WiFi channel to a free one
- Disable 5Ghz wifi on your router
- Disable 802.11n on you rrouter, just use 802.11g
Hopefully Samsung fixes these issues before releasing official 4.1.1
With the leaked JB stock rom my Wi-Fi works fine. However, with anything related to AOKP or CM10 I now cannot connect at all. It worked previously but something has changed in the last 10days to stop it. I flashed the leaked initial leaked JB stock rom and that's when the problems started when I went back to CM10.
I have a Netgear DGN2000, WNDR3700v2 and also edimax range extender. It prompts me for the password, tries to connect but then just saves the config without connecting. Tried with/without 5g, g only etc.. still no joy.
manook said:
With the leaked JB stock rom my Wi-Fi works fine. However, with anything related to AOKP or CM10 I now cannot connect at all. It worked previously but something has changed in the last 10days to stop it. I flashed the leaked initial leaked JB stock rom and that's when the problems started when I went back to CM10.
I have a Netgear DGN2000, WNDR3700v2 and also edimax range extender. It prompts me for the password, tries to connect but then just saves the config without connecting. Tried with/without 5g, g only etc.. still no joy.
Click to expand...
Click to collapse
Use Odin to flash a stock ics Rom and that will fix the WiFi problems on cm10
Sent from my GT-I9300 using Tapatalk 2
I tried all solutions that are mentioned here. But I always get disconnected when I move away. I'm at 100% ICS stock rom (updated through KIES today) and still not solved.
Going to bring it back tomorrow and hope to get a replacement or a fix by samsung.
IMO:
your modem changed when you flashed the leak Rom. Easy way to fix You must flash modem through or odin or cwm. or any stock ROM via odin.
(nothing to do with your WiFi router.)
Have you guys tried updating the firmware of your router?
no problems for me.
using Omega v14 (XXDLH4)
Baseband (XXLH1)
Connecting fine with (WPA, WPA2, WEP)
If the problem is with the modem guys, why not use another modem or the one previously used in stock ICS?
How will a modem help WiFi when WiFi is a product of the kernel ??
jje
JJEgan said:
How will a modem help WiFi when WiFi is a product of the kernel ??
jje
Click to expand...
Click to collapse
I have no idea. I just made that suggestion because I saw the other guys discussing using a different modem.
Anyways. The kernel I'm using is the one that came with OMEGA rom, which is the stock kernel that came with the LH4 firmware.
Just to say that this wifi 'speed fix' actually fixes this connection issue for me
http://forum.xda-developers.com/showthread.php?t=1852323
manook said:
With the leaked JB stock rom my Wi-Fi works fine. However, with anything related to AOKP or CM10 I now cannot connect at all. It worked previously but something has changed in the last 10days to stop it. I flashed the leaked initial leaked JB stock rom and that's when the problems started when I went back to CM10.
I have a Netgear DGN2000, WNDR3700v2 and also edimax range extender. It prompts me for the password, tries to connect but then just saves the config without connecting. Tried with/without 5g, g only etc.. still no joy.
Click to expand...
Click to collapse
Hi, I am also getting this problem. Have you tried flashing a stock rom through ODIN and then install CM9 or any other AOSP rom as suggested by Brian 6685. Does that fix the problem?
Hello, i've rooted my phone and installed black bean rom, and after while i've detected that my wifi doesn't work (doesn't connect to router even with good password). Because if that i've installed FoxHound Rising 1.5.4 JellyBean Beta and it kinda helped, now it connect to router but lose connection very offten and it take ages to load webpage or doesn't even load it. I've made screenshot, can someone tell my what white thing next to my wifi means?
[email protected] 15:58 uktime
Btw, my network data works fine.
bump
Bump
Ok first of all you need to realise that those roms are BETAS, they are based on LEAKED otas. They are not completely ready to be released to the public yet.
That symbol is for WiFi direct, it's a bug in DLH9 leak and can't be removed unless you flash the WiFi direct fix floating around the forum.
It does no harm anyway.
Sent from my GT-I9300 using xda premium
Hi
Is anyone having a problem connecting to corporate Wifi that used Cisco LEAP since the upgrade to 4.2.2? I can longer log into our corporate wifi, even though LEAP wasn't listed as an option as long as I had auth set to PEAP it was working on 4.1.2. I have tried tweaking the settings with WIFI advanced configuration editor but that did not solve my authentication problems.
Does anyone know a workaround to solve LEAP auth problems on 4.2.2?
I am using a US SGP311 16GB model, if no work around exists is there a good guide to revert back to 4.1.2? I have seen various post for DE and FR versions but I assume I need the US version.
Thanks
Dan
gave up looking for a solution and found a link and image to revert back to 4.1.2, disabled the update service and I guess I am staying with 4.1.2...
bitl3ss said:
Hi
Is anyone having a problem connecting to corporate Wifi that used Cisco LEAP since the upgrade to 4.2.2? I can longer log into our corporate wifi, even though LEAP wasn't listed as an option as long as I had auth set to PEAP it was working on 4.1.2. I have tried tweaking the settings with WIFI advanced configuration editor but that did not solve my authentication problems.
Does anyone know a workaround to solve LEAP auth problems on 4.2.2?
I am using a US SGP311 16GB model, if no work around exists is there a good guide to revert back to 4.1.2? I have seen various post for DE and FR versions but I assume I need the US version.
Thanks
Dan
Click to expand...
Click to collapse