Related
Hello,
I am trying to get viperROM to work correctly on my Evo 3D. I would have posted in that thread but I don't have 10 posts yet so I'm not allowed...
I wasn't thinking and I accepted the OTA update when it came out.
So I used this tutorial and did the HTC unlock and then flashed CWM 4.0.1.4 to my phone.
I used CWM to back up my stock ROM, then I used it to install viperROM.
Well, it worked except for the fact that the WiFi wouldn't turn on. It just said "Error".
I have been reading these forums for hours now and my eyes are glazing over but I figure it's something to do with the radio I guess?
I tried to do some forum searches but the search function is apparently down for nightly maintenance.
Anyways, I restored my backup and thank God WiFi is working again.
Can someone please point me in the right direction to fixing this?
Thanks.
Did you do a full wipe before you installed viperRom?
I don't believe you can use Viperrom on your phone because it is a 2.3.3 rom and your kernel is only for 2.3.4 roms. When you took the OTA and your phone upgraded to the 1.50 bootloader you lost the ability to install kernels and write to the boot partition. With out the proper kernel you will have problems running any 2.3.3 roms properly. Look for a rom that is already upgraded to 2.3.4 and give that a try. For now I would flash back to stock and wait for Viperboy to update his rom.
help please?
I try RCMIX 2.2.3 and recover HTC Rom but stcuk boot HTC logo.
Can i replaces viperROM ? how i can?
I'm Newbie.
Thanks
Konfuzion said:
Did you do a full wipe before you installed viperRom?
Click to expand...
Click to collapse
Yes, I did both of the wipes that it prompted before installing it.
cruise350 said:
I don't believe you can use Viperrom on your phone because it is a 2.3.3 rom and your kernel is only for 2.3.4 roms. When you took the OTA and your phone upgraded to the 1.50 bootloader you lost the ability to install kernels and write to the boot partition. With out the proper kernel you will have problems running any 2.3.3 roms properly. Look for a rom that is already upgraded to 2.3.4 and give that a try. For now I would flash back to stock and wait for Viperboy to update his rom.
Click to expand...
Click to collapse
I never would have thought of that!
Thanks both of you for your help
There is lots of concern about kernels and flashing them with various main versions. There are 3 basic main versions floating around:
Shipped Rezound - Main Version = 1.02.605.6
OTA Rezound - Main Version = 2.01.605.11
Leaked RUU for Android 4.0.3 - Main Version = 3.10.605.7
I am not going to mess with the leaked RUU for 4.0.3 but I can help with the other two. So, all of the following can be flashed in recovery and will install the library then reboot to bootloader to install the boot.img.
This will at least help you install a complete kernel for whatever situation you are in to cure things like WiFi broken.
Choose the one that best fits your situation, copy it to your SD Card, reboot to recovery and choose the Install Zip option. When it reboots to bootloader press power to start and then follow the instructions.
Currently running a Gingerbread ROM before installing the OTA:
Main Version = 1.02.605.6
Currently running a ICS ROM before installing the OTA:
Main Version = 1.02.605.6
Currently running a Gingerbread ROM after installing the OTA:
Main Version = 2.01.605.11
Currently running a ICS ROM after installing the OTA:
Main Version = 2.01.605.11
NOTE: You must be HTC UnLocked
If you are running the stock OTA stick with that kernel
By the way,
The GB kernel is the unlocked kernel for ADB when phone is active.
The ICS kernel is the one for ICS 4.0.1
thanks for writing this up Nils, I think it will save alot of problems and questions arising from flashing different roms !
thanks man!
are these stock kernels??
andybones said:
thanks man!
are these stock kernels??
Click to expand...
Click to collapse
GB is unlocked but other than that they are stock
Wow, you just helped soooo many people. :thumbup:
Good work! :beer:
What if I have
Kernel version: 3.0.13-gaf15497
Build number: 3.10.605.7
I want to get back to GB so I can unroot, relock, and get the OTA's new radio?
BBEgo said:
What if I have
Kernel version: 3.0.13-gaf15497
Build number: 3.10.605.7
I want to get back to GB so I can unroot, relock, and get the OTA's new radio?
Click to expand...
Click to collapse
I assume your at the 3.x main version then. I can get you to the stock kernel but can't change the main version with this approach. You could try the gb kernel from the released version and see if you get the mainver failure. If you do you can use the manual approach to get to mainver back to 1.02.605.6
I'm currently on rooted stock shipped Rezound, no OTA. I'm having trouble flashing back to CleanICS, ineffibilis ICS and ineffibilis Gb roms. I was previously on CleanICS. Then decided i wanted to go back to a Gb ROM. So what I did was flash a GB boot.img then I tried to flash ineffibilis Gb, but then the installation gets aborted in recovey. I was able to restore my stock rooted GB ROM though.
I tried to flash your kernel for "stock Gb Rezound, before OTA", but I'm also getting a Mainver failure.
What do I need to do to Be able to flash ineffibilis GB ROM? I'm currently on Gb stock no OTA. Shouldn't I be able to flash other Gb roms without worrying about mainver?
Will the "curently running ICS before OTA" also install the new firmware?
Sent from my HTC Rezound
Will the "curently running ICS before OTA" also install the new firmware?
Sent from my HTC Rezound
Click to expand...
Click to collapse
No, just the kernel
Finally got my head around this a couple of days ago, and thought someone should do exactly this. This is what makes you, you. Thank you Nile for being the kind of developer every phone needs.
Sent from my ADR6425LVW using Tapatalk
NilsP said:
Currently running a Gingerbread ROM after installing the OTA:
Main Version = 2.01.605.11
Currently running a ICS ROM after installing the OTA:
Main Version = 2.01.605.11
NOTE: You must be HTC UnLocked
If you are running the stock OTA stick with that kernel
Click to expand...
Click to collapse
In my case, I was on stock with OTA 2.01.605.11, and am installing Senseless 2.1 ICS. By your terminology, would I go with "running an ICS ROM after installing OTA", or stick to the stock kernel per the final bold statement?
spitzaf said:
In my case, I was on stock with OTA 2.01.605.11, and am installing Senseless 2.1 ICS. By your terminology, would I go with "running an ICS ROM after installing OTA", or stick to the stock kernel per the final bold statement?
Click to expand...
Click to collapse
If your going to the ICS ROM you need to flash the ICS kernel.
The last statement simply means if you are running the OTA don't bother with any other kernels.
Gotcha. Thanks Nils
So to go from your ICS back to a stock rooted nandroid restore what would be needed? The main version thing is confusing.
Sent from my ADR6425LVW
silverxbv2 said:
So to go from your ICS back to a stock rooted nandroid restore what would be needed? The main version thing is confusing.
Sent from my ADR6425LVW
Click to expand...
Click to collapse
To go back to stock from my ICS ROM as long as you have not installed the OTA just requires running the stock RUU. You should not have to relock or anything since you still have the stock radio and hboot.
Now if you installed the OTA that is another story and there is a whole thread about that.
Part of my reason for starting this thread was to help others with main version problems.
The second reason was to help myself and other developers determine when we could safely cut our ROM's over to the OTA main version even if we did not use the new OTA kernel.
The downloads for these kernels, even after just 1 day, clearly indicates that most people have either accepted the OTA or installed the OTA ROM on their own. In other words, most of the downloads are for the versions that are based on the OTA main version to be installed on custom ROM's that use the old main version kernels.
I will watch the downloads for a few more days then decide what to do with my ROMs
NilsP said:
To go back to stock from my ICS ROM as long as you have not installed the OTA just requires running the stock RUU. You should not have to relock or anything since you still have the stock radio and hboot.
Now if you installed the OTA that is another story and there is a whole thread about that.
Click to expand...
Click to collapse
No. I didn't run the ota. Just need to get back to the stock gb Rom I made a backup of right after unlocking and rooting for a minute.
Sent from my ADR6425LVW
silverxbv2 said:
No. I didn't run the ota. Just need to get back to the stock gb Rom I made a backup of right after unlocking and rooting for a minute.
Sent from my ADR6425LVW
Click to expand...
Click to collapse
Do the nand restore and flash the GB kernel with old main version.
Nils,
Just wanted to clarify one thing. I relocked, flashed original ruu, accepted ota, unlocked again and rooted. still using this rom which is essentially bone stock rooted. If I flash CR based off latest ota and later decided to restore nandroid of the bone stock, do I flash this kernel as well?
Currently running a Gingerbread ROM after installing the OTA:
Main Version = 2.01.605.11
my apologies for the question but I wondered in the case you are restoring a nandroid, do you need to also flash the kernel before restoring the nandroid. Hope I made myself clear. lol.
Do I really have to flash an RUU before flashing an ICS rom or is there an alternative?
if you want ics rom that has 2.01.605.11 than no u don't no need to.
if you want ics rom that has 3.11.605.22 than yes u need to ruu leaked ics.
Some of the roms offer a patch you can run instead..
For example - CleanRom
"UPDATE: Because some people are hesitant to flash the leaked RUU I have posted a patch for those with the old firmware HERE NO SUPPORT IS GIVEN FOR THE PATCH! Support will only be given for those on the leaked firmware!"
http://forum.xda-developers.com/showthread.php?t=1453324
mjones73 said:
Some of the roms offer a patch you can run instead..
For example - CleanRom
"UPDATE: Because some people are hesitant to flash the leaked RUU I have posted a patch for those with the old firmware HERE NO SUPPORT IS GIVEN FOR THE PATCH! Support will only be given for those on the leaked firmware!"
http://forum.xda-developers.com/showthread.php?t=1453324
Click to expand...
Click to collapse
+1 to this but some people are still having problems flashing the patch. I would just flash the RUU and do it the right way. Less problems and it was done right.
I've been back and forth from gb to ics. Just flash the rom let the kernel update, boot up the phone, go back to recovery and flash the patch.
Scott's newest cleanrom is for any RUU. His rom is as stable and as awesome as it gets.
05Warrior said:
+1 to this but some people are still having problems flashing the patch. I would just flash the RUU and do it the right way. Less problems and it was done right.
Click to expand...
Click to collapse
The latest CleanRom updates supports both now.. Personally I wouldn't RUU in case there's any issues with installing an official update unless you need to...
I installed it myself, this was before the patches came along...
Firstly.. I'll admit that I didn't read as throughly as I probably should have.. I have rooted several phones with the first being the original Motorola Droid and then a couple others.. All fairly tricky but for the most part no big deal... Anyway, I had no idea what S-ON or S-OFF meant nor was it very easy to find information such as this explained in detail..
Anyway, here is where I'm at..
1. Running S-ON, ICS w/ Slim 1.6
2. Phone has a tendency to reboot when it feels like it.. hasn't been too bad but seems to happen more when it's on 4G
3. Phone will NOT allow me to mount the internal storage nor the sd card when I plug into a computer.. like I mean it's not even an option, all I get are charge and internet tethering options..
4. the BIGGEST issue.. I can not tether whatsoever.. I've tried several apps such as Barnacle & PDAnet but none of which work.. I'm sorry I'm just used to the days of my incredible where it was very easy to tether and install ROM's all day long so I guess I was spoiled..
Any help would be appreciated.. the more I read though the more that S-OFF will offer and am I correct to have read that if I do the S-OFF I can turn my phone back to a "locked" status in the boot loader and in turn can also put back to completely stock??
Thanks!
You need to flash the old firmware patch. Should be able to find it in one of the rom threads
Sent from my ADR6425LVW using Tapatalk 2
pwned3 said:
You need to flash the old firmware patch. Should be able to find it in one of the rom threads
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
So after checking into some things I tried going a different route..
I downloaded Nils' Business ICS 4.0.3 Sense 3.6 (ICS Latest) (Aroma Installer).. followed the instructions.. installed with S-ON etc.. everything seemed fine.. NOW it won't stop rebooting after I configured Gmail & my work E-mail.. I can't boot into the bootloader menu unless I remove the SD card because it tries to flash the PH98IMG.zip as soon as it loads..
SO what to do next?? HBOOT I have the following information
UNLOCKED
VIGOR PVT SHIP S-ON SL
HBOOT-2.11.0000
Radio-0.95.00.1118r/0.95.0.1223r
OpenDSP-v10.6.0.7611.00.0919
eMMC-boot
Oct 6 2011, 15:43.22
HELP please!!
.make sure you install the kernel and the gb firmware patch...these 2 things missing will cause bootloops .
If you have issues ask in Nils thread and I am sure he will help you out. I have been s off and on ics firmware for awhile prior to the aroma install method. Otherwise I could help you out more
Edit: you will want to select the first 3 boxes on the aroma install screen...Rom...kernel...gb firmware patch
Not sure how the installer works after that...but that's a start.
Edit2: you are currently on gb firmware, in the future if you run a gb Rom you will need to flash the gb kernel for the Rom. Any ics based rims will require the ics kernel AND the firmware patch. Without the firmware patch your sd card won't show up properly. The wrong kernel will end up in boot loops. Hope this helps explain things a bit.
Sent from my ADR6425LVW using xda app-developers app
ericsignals said:
.make sure you install the kernel and the gb firmware patch...these 2 things missing will cause bootloops .
If you have issues ask in Nils thread and I am sure he will help you out. I have been s off and on ics firmware for awhile prior to the aroma install method. Otherwise I could help you out more
Edit: you will want to select the first 3 boxes on the aroma install screen...Rom...kernel...gb firmware patch
Not sure how the installer works after that...but that's a start.
Edit2: you are currently on gb firmware, in the future if you run a gb Rom you will need to flash the gb kernel for the Rom. Any ics based rims will require the ics kernel AND the firmware patch. Without the firmware patch your sd card won't show up properly. The wrong kernel will end up in boot loops. Hope this helps explain things a bit.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Thank you very much for the help... I really thought I was on ICS firmware.. I know this sounds stupid but isn't Android version 4.0.3 ICS??
OH WAIT it just hit me.. So my ROM is 4.0.3 but the kernel is still GB.. I gotcha.. so of course my next question is.. can I upgrade to ICS firmware without S-OFF or is that a requirement???
I think what I'll end up doing is just flashing GB ROM but curious what would be needed to get to ICS firmware and can I get back again?
You can upgrade to ics firmware (via ics ruu). However with s on, you can only run the ruu you are currently on and/or newer versions/leaks. With s off you can run any ruu you like.
Basically you never ran an ics ruu, so your firmware is gingerbread. You can run either gb or ics. With a gingerbread Rom, you would flash Rom and kernel. With ics Roms, you'll need to flash Rom, kernel, and firmware patch.
If you decide to upgrade and run a ics ruu it will upgrade your hboot, radios, and change the mount point for the sd card. The mount point change is the reason for the firmware patch. After running an ics ruu you will have ics firmware. Running a ics Rom, you'll flash Rom and kernel. If you change mind and want to go to a gb Rom, you'll need Rom, kernel, and firmware patch.
So depending on which version or way you go depends on the method of flashing a Rom. Firmware is independent of roms, and the only easy way to change firmware is via a RUU.
Supposedly the ota is coming soon, supposedly the latest leak is the ota, supposedly the s off exploit will not be able to be patched.
I decided to s off...there's many threads with lots of info...so if you decide to go that route take time, read, and read some more. It's not too hard just take your time and don't get frustrated.
Once s off, most roms flash the kernels automatically, saving you a step. You can also run any ruu you want. Ruu is like a factory image that wipes the phone and upgrades radio, etc....basically it will be like you first got the phone and turned it on.
Everyone has different experiences with radios, some are betterfor some, others worse. Overall the new ics firmware seems to be better on battery and network speed for me at least.
There's many ways to proceed....however most roms that are being worked are ics based...and will be more so when the official ics ota hits.
Sent from my ADR6425LVW using xda app-developers app
Sure enough!! I went with a GB ROM CleanROM GBE 1.7.5 and it is working perfectly.. I'll decide if I want to move forward with anything else.. I really liked the way the ICS ROMs ran so I man end up moving to that firmware in the future but thank you very much with the explanations that REALLY helped a lot!!
Have a great 4th!!
mmmmpsi said:
Sure enough!! I went with a GB ROM CleanROM GBE 1.7.5 and it is working perfectly.. I'll decide if I want to move forward with anything else.. I really liked the way the ICS ROMs ran so I man end up moving to that firmware in the future but thank you very much with the explanations that REALLY helped a lot!!
Have a great 4th!!
Click to expand...
Click to collapse
Anytime...best of luck and have a happy 4th yourself
Sent from my ADR6425LVW using xda app-developers app
mmmmpsi said:
Sure enough!! I went with a GB ROM CleanROM GBE 1.7.5 and it is working perfectly.. I'll decide if I want to move forward with anything else.. I really liked the way the ICS ROMs ran so I man end up moving to that firmware in the future but thank you very much with the explanations that REALLY helped a lot!!
Have a great 4th!!
Click to expand...
Click to collapse
ICS is the way to go, and for it to run properly you should run the latest RUU leak. This will give you the correct firmware. Once you flash the recovery of your choice back onto your phone and re-root, you really should S-off. Amon-Ra is the best initial Recovery choice, because it'll root anything, right there in recovery. S-off simplifies EVERYTHING. From there, you can flash the ICS Rom of your choice, and not have any of the issues you've been reporting.
With S-off, you can flash whatever radio you want, put a different boot-up splash screen on, and the kernel installs automatically when you flash a Rom.
It's a little time consuming, but it isn't difficult. There are threads from some very helpful guys here that explain how to do everything. So when you have some time, I suggest you just go for it. You'll be glad you did.
Best of luck,
BBEgo
ericsignals said:
You can upgrade to ics firmware (via ics ruu). However with s on, you can only run the ruu you are currently on and/or newer versions/leaks.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
I'm still a little leary on doing the S-OFF so I have a question on this.. What do you mean by this?? What has to match to be able to run ICS ROM's.. Are you saying the ICS Firmware version needs to match the ICS ROM?
Hi all,
I've made all the necessary steps before flashing a new ICS Rom: Unlocked Bootloader, Recovery (CWM), Root, S-OFF, made a backup.
I've tried few ICS roms (MUIU and Cyanogen) and the flashing was ok, but once the new rom boots and I touch a screen, the phone reboots. It happens all the time, regardless of the rom.
The strange thing is, that it happens only with ICS roms, but when I install JB (2.3.4) custom rom everything goes smoothly anf the phone works just fine.
How can I prevent my phone to restart all the time? I want to upgrade my Amaze to the ICS.
Thanks.
scorp8669 said:
Hi all,
I've made all the necessary steps before flashing a new ICS Rom: Unlocked Bootloader, Recovery (CWM), Root, S-OFF, made a backup.
I've tried few ICS roms (MUIU and Cyanogen) and the flashing was ok, but once the new rom boots and I touch a screen, the phone reboots. It happens all the time, regardless of the rom.
The strange thing is, that it happens only with ICS roms, but when I install JB (2.3.4) custom rom everything goes smoothly anf the phone works just fine.
How can I prevent my phone to restart all the time? I want to upgrade my Amaze to the ICS.
Thanks.
Click to expand...
Click to collapse
2.3.4 isn't JB (Jelly Bean) thats GB (Ginger Bread). Sounds like you have bad downloads. Check your Roms MD5 Sums.
PeterC18st said:
2.3.4 isn't JB (Jelly Bean) thats GB (Ginger Bread). Sounds like you have bad downloads. Check your Roms MD5 Sums.
Click to expand...
Click to collapse
Right It is GB. I checked the MD5 and they are ok. Anyway, there is now way that I will have bad downloads for ICS but good downloads for GB. There must be something else that I'm missing
scorp8669 said:
Right It is GB. I checked the MD5 and they are ok. Anyway, there is now way that I will have bad downloads for ICS but good downloads for GB. There must be something else that I'm missing
Click to expand...
Click to collapse
For you to run ics roms you first need to update to ics from a ruu. Ics has different firmware and changes the partitions also. Once you do that then you can install ics based roms.
PeterC18st said:
For you to run ics roms you first need to update to ics from a ruu. Ics has different firmware and changes the partitions also. Once you do that then you can install ics based roms.
Click to expand...
Click to collapse
Can you please give me a link to the instructions?
Thanks.
scorp8669 said:
Can you please give me a link to the instructions?
Thanks.
Click to expand...
Click to collapse
Follow the instructions from the amaze bible. Most if not all questions you may have can be answered there.
http://forum.xda-developers.com/showthread.php?t=1616472http://forum.xda-developers.com/showthread.php?t=1616472
PeterC18st said:
Follow the instructions from the amaze bible. Most if not all questions you may have can be answered there.
http://forum.xda-developers.com/showthread.php?t=1616472http://forum.xda-developers.com/showthread.php?t=1616472
Click to expand...
Click to collapse
I removed the SuperCID
Can I install the Cyanogen MOD after it or do I have to install the PH85IMG before (points 5-9 in the tutorial)