Related
is there anyway possible? WinMo phones have hether where they can run android (and even ubuntu!) from the sd card, and I was wondering if there was a way to run an eris ROM from an SD card.
this way, we can try out new roms without fully wiping and installing, nd depending on how it works, we could also get other OS's in the mix (winmo, linux, etc)
not yet, and chances are there wont ever be a way to do that. just do a nand backup, flash the rom, if you dont like it, wipe, then restore backup. its really not that difficult. in a weeks time, i think i have flashed my phone a dozen times, or more.
well that's lame. if I was more proficient in linux/android apps I'd get right on it, i know so little of this area.
It could technically be done, I suppose. Its super easy to nand backup your phone and flash though.
Noob ? I just downloaded twrp when I go to recovery what should I back up there's so many options I really don't know which one to pick. Should i pick all of them and compress or some and compress .please be specific.
LOL... it depends on what youre trying to do?
Mostly, youre going to use recovery to flash zip files... kernals, roms, tweaks etc mostly come in the form of zips, so you'll see one option to install a zip file....
Another thing to do, is wipe your phone before a flash, again done with recovery...You'll go to the WIPE menu, and wipe cache, dalvik, (do it a few times to be sure) and do a data wipe before flashing ROMs, this will ensure a flawless install
Lastly you use nandroid to "backup" the current state of your phone, you do this BEFORE flashing a rom... its like a failsafe, if something F's up during your flash, you can restore this "nandroid" backup to restore you phone to its exact state prior to your flash...
So, nandroid back ups, restoring, flashing zips, and wiping are your basic uses of recovery
getmoneygreen said:
Noob ? I just downloaded twrp when I go to recovery what should I back up there's so many options I really don't know which one to pick. Should i pick all of them and compress or some and compress .please be specific.
Click to expand...
Click to collapse
Stick with the ones that are already "x'd" off. The only option that I'd suggest adding is Wimax. That will back up your wimax partition, which contains your RSA keys, which are essential to 4g working (lose your RSA keys, lose your 4g forever, so it's good to keep them backed up). Compressing the backup is optional. It will save a considerable amount of space if you choose to compress them, however the backups will take quite a bit longer to complete. I made two backups that were not compressed, and saved them to my computer, because they were over 1GB each, which is absurd. I now compress all of my backups, and all seems well.
Thank you soo much you guys helped me out a lot
If you don't mind me asking, what were the original TWRP recovery options that were selected. When I did my first Nand backup after S-off and rooting I selected all the options to be safe. Then when I went to go make another back up everything was still selected and I know I do not need all those options. Thanks.
PdawG43 said:
If you don't mind me asking, what were the original TWRP recovery options that were selected. When I did my first Nand backup after S-off and rooting I selected all the options to be safe. Then when I went to go make another back up everything was still selected and I know I do not need all those options. Thanks.
Click to expand...
Click to collapse
To answer your question If I'm correct from top to bottom the first two and also include the Wimax and the compress files .so that's four X's.that's what I have
I did a Nand backup having the first 3 and then Wimax and then when I tried to flash to that backup my phone went black and shut off (thought it had bricked on me) was able to get it to reboot by doing volume down + power button. Am I missing something? Or am I just being dumb when it comes to flashing from a Nand backup?
Are you still having problems with the nand back ups pdawg
So we should wipe data to factory settings before doing the back?
Also, where does titanium backup come into play?
Sent from my PG86100 using XDA Premium App
I haven't had time to try it again yet. Though later tonight I will try again when I flash viper rom 1.3
I checked everything under the sun in nandroid menu, so when I go to nandroid options then restore i choose the one I want to restore, it flashes then when I reboot it just sits on the HTC EVO screnn forever! almost 20 min so far. is anybody else having this issue? am I doing something wrong? I did pull the battery once and rebooted but still nothing. I backed up a couple of nice set ups I would like to have back. any ideas would be great
jajuan said:
So we should wipe data to factory settings before doing the back?
Also, where does titanium backup come into play?
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
To answer your question about Titanium. This app will back up all your apps--apps only, not your entire system.
This is useful when you flash a new rom because that new rom will not include all the apps you had (obviously). Instead of fishing for each one in the market, simply re-download Titanium and use it to restore your apps (and data if you like). I really don't use Tatanium as much as I used to. This is because I don't download a crapload of apps and when I install a new rom it doesn't take me very long to re-download the ones I like from the market.
BUT, if you have an app that you can't get through the market, then Titanium is vital to restoring it.
Hope this helps.
Hello, I'm brand new to these forums, but I've been browsing them for the past week, and Im thinking about making the plunge to CM7. I've never done anything like this before, so could you guys answer a few of my questions, and maybe put my fears to rest?
First off, let me say that I read the Moto Atrix noob guide and updated thread.
This is my phone info:
System Version: 4.5.141.MB860.ATT.en.US
Android Version: 2.3.6
I have had this phone for over a year, and everything is completely stock.
Questions:
1. I have seen various threads about the latest firmware from Motorola causing an inability to change the OS. Is this true? And if not, do all the guides I've read regarding flashing, roms, backup, etc. still applicable?
2. I want to run CM7, but is it better to install CM7 directly from their website, or use some of the versions that I have seen members offering here. What are the main differences? What do you recommend?
3. Is CM7 as stable as stock?
4. Is it possible to flash different kernels to see what type of battery life difference they make, and can you do this without changing the OS?
5. I've seen multiple times of the importance of backing everything up. My only concerns are the contacts and sms. My contacts are stored on "Motorola Services." How can I back them up? As for sms, I use an app called SMS backup and restore. It creates an xml file I think, so when I go to restore my sms messages, everything should be as i was before, right? I'm worried about formatting issues here.
I just want to make sure I understand everything so I dont mess anything up. Thanks for your help!
yep. being a virgin and knowing it has to happen gives ya them butterflies in the tummy. Don't worry, you'll be fine, WE were all virgins at one time also. There will be somone here to assist you if you need it.
1.Follow the automatic bootloader thread. http://forum.xda-developers.com/showthread.php?t=1182871
2. Read a little on the roms you are considering. The ones based on cm7 are basically the same. differences will be in themes, and extra/different features like diff apps and launchers & more or less customization options such as for settings. Have to choose which one appeals to you, and go with it. Beauty of this is if you want to try something else, only takes a matter of minutes and you can change to a differnt cm7 rom. In a lot of instances, once you are on cm7, flashing a different cm7 rom, you don't have to erase or lose your data, just wipe system and caches and load new flavor. Only takes a couple of minutes to flash a new rom, or kernal, or radio, and your data stays intact. Changing to a CM9 or a different base rom is when you will need to wipe the whole phone including data.
3. Yes, cm7 was the last revision when devs were still able to use OEM drivers, so they are stable.
4. Answered in #2
5. I don't recall which apps were good for saving your sms stuff on cm7. Seems like ages ago since I was using that! Might want to consider moving your Motorola based stuff over to Google. Contacts will be availabe there and will load automatically when you initiate your new rom. You don't need to do any formatting, but erasing will wipe areas, and will erase personal data if that option is chosen, so your concern is noted. Pay attention to what you are doing, don't wipe data from CWM when flashing if you intend on keeping your user data. You can wipe system and caches and not lose your data.
Yes back everthing up. Make a copy of your PDS folder and stash it away on your pc (do this before starting flashing), this has your phone id stuffs and a couple other valuables. Don't share that with anyone either. Make a nandroid b/u (an option in your new CWM) as soon as you can after installing CWM. You can reload that if things don't go good, and be back where you started. Install SuperuserSU (not the plain Superuser) from google play.
Just do it, you'll like it! become one of the elite!
If you ask me... You'll need a custom recovery to be able to flash CM7 anyway, so why not use it to make a proper full nandroid backup too?
I mean sure, you can try messing around with specialized apps to save and restore only the parts most critical to you (like contacts and texts), but if for any reason you'll want to completely go back, at least you'll know you can.
ravilov said:
If you ask me... You'll need a custom recovery to be able to flash CM7 anyway, so why not use it to make a proper full nandroid backup too?
I mean sure, you can try messing around with specialized apps to save and restore only the parts most critical to you (like contacts and texts), but if for any reason you'll want to completely go back, at least you'll know you can.
Click to expand...
Click to collapse
Will this full backup allow me to then only restore the data I wanted to keep? Because I know I wouldnt want to restore the whole thing.
wvcaudill2 said:
Will this full backup allow me to then only restore the data I wanted to keep? Because I know I wouldnt want to restore the whole thing.
Click to expand...
Click to collapse
CWM will allow you to restore individual partitions. So you can, say, restore just /data and leave others intact. It won't let you restore specific folders in /data though. Basically such a backup is most useful if you need to restore the entire phone to a specific state.
wvcaudill2 said:
Will this full backup allow me to then only restore the data I wanted to keep? Because I know I wouldnt want to restore the whole thing.
Click to expand...
Click to collapse
Use titanium backup to restore individual apps and their data...
Sent from my MB860 using Tapatalk 2
ravilov said:
CWM will allow you to restore individual partitions. So you can, say, restore just /data and leave others intact. It won't let you restore specific folders in /data though. Basically such a backup is most useful if you need to restore the entire phone to a specific state.
Click to expand...
Click to collapse
what all is stored in the /data partition?
Also, is there some comparison of roms out there? I've been searching through the forum, and can't seem to find any. I see NottachAtrix4G alot. Is this based off of CM7? Also, does the fingerprint scanner work in cm7?
wvcaudill2 said:
what all is stored in the /data partition?
Also, is there some comparison of roms out there? I've been searching through the forum, and can't seem to find any. I see NottachAtrix4G alot. Is this based off of CM7? Also, does the fingerprint scanner work in cm7?
Click to expand...
Click to collapse
The data partition is where your contacts, messages, settings and apps that you have installed go to.
I'm sure I saw some threads comparing ROMs, even though I recommend you try all the ROMs and see which one best fits your needs. Back when I had my old Milestone 2, everyone talked about the CM7 ROM, as it was the best to the device, but as soon as I tried the MIUI 2.3.7, never came back to CM7 (at least with M2, used it again with atrix)
Nottachtrix isn't based off CM7, it's a stock gingerbread ROM with modifications.
Yes, the fingerprint scanner works (at least on Neutrino CM7).
MaxK47 said:
The data partition is where your contacts, messages, settings and apps that you have installed go to.
I'm sure I saw some threads comparing ROMs, even though I recommend you try all the ROMs and see which one best fits your needs. Back when I had my old Milestone 2, everyone talked about the CM7 ROM, as it was the best to the device, but as soon as I tried the MIUI 2.3.7, never came back to CM7 (at least with M2, used it again with atrix)
Nottachtrix isn't based off CM7, it's a stock gingerbread ROM with modifications.
Yes, the fingerprint scanner works (at least on Neutrino CM7).
Click to expand...
Click to collapse
Thanks for a good answer. I have yet another question though.
Some of the ROMS I have been looking at advertise that they are packaged with a certain kernel. Do all ROMS contain a kernel, or will I have to flash my own depending on which ROM I choose?
Again, sorry for all the questions, I just want to make sure I dont screw this up!
Every ROM is a complete system, so it must come with a kernel. In most cases after flashing a ROM you're ready to go. You'd only want to flash a different kernel if for some reason you're not happy with the one supplied with the ROM.
Hey guys. Recently rooted my DX2 that was on the latest 2.3.5 update and flashed Eclipse. I love it and its amazing but I want to try other ROMs that have much more custom options, etc. However, I was wondering what the best way to go about this is. I know how to make nandroid backups and have one with eclipse as well as one from right after i rooted.
what's the best way to switch between these without losing data etc?
Ok well the nandroid is good but all the other ROMs for the X2 are based on 2.3.4. You will need to sbf down and unfortunately there is no way around this. If you ever wanna come back to eclipse though just take the 2.3.5 ota, root and restore your backup. The same process can be done for the ROM's on 2.3.4. Install one, make a backup so if you ever want to come back to it you can just restore the nandroid. Use Titanium Backup to backup apps so you can just restore them on the other ROMs. Don't back up system data though because it will screw up other ROMs.
if i have a backup of stock rooted i can just boot into recovery and restore using the backup? also, is there an up to date guide on how to rename them.
as for the 2.3.4 ROM backups, i'd have to be on 2.3.4 in order to restore them?
Yea you can restore the stock rooted if you want. To rename them just use a file explorer or something similar and rename to whatever you want. Don't add spaces though or it will screw it up.
And yea you don't wan't to restore a backup of a different version of android. I don't know definitively that it will not work, but it's just a bad idea in general.
What gets erased when I apply an update? My backups are on my external sd card so they'll overwrite the internal correct?
Ive had my internal reserved for mostly just mp3s (and recently photography books and vids), and it still hasnt been erased through months of data wipes and sbfs.. App data can be backed up with titanium backup pro and batch restored. Google backs up contacts, wifi settings, wallpaper sometimes. If using a non stock launcher, your home screen setup and setting can be transfered btw roms. Its just system data and customizations that you need to do for the new rom and thats the fun part. I skipped some details of course but Android is a really efficient system.
Sent from my DROID X2 using xda app-developers app
thanks for the reply. it looks like the /system and /data folder are the ones that get overwritten so everything else stays untouched from what i can tell.
i tried restoring an old backup i made and got stuck at checkin_mot.db file.. pulled the battery, factory reset, restored latest eclipse backup. not sure what went wrong or if i just wasn't patient enough lol.
I had trouble with a cm7 backup freezing at the same spot..had to delete it. The cm9 backup i tried afterwards restored fine and pretty fast.
Sent from my DROID X2 using xda app-developers app
The biggest issue when coming from Eclipse, is the kernel. You cannot use a nandroid backup to switch between a 2.3.4 and a 2.3.5 rom. The nandroid cannot backup the kernel due to our ****ty locked bootloader.
So the only way you can go to another rom is to SBF back to 2.3.4 then root, and flash a new one. And even then a nandroid of Eclipse is worthless without it's kernel.
So no, there is no easier way. Other than to avoid eclipse like the plague, and stick with 2.3.4 roms.
Please let me know if I'm a complete retard here, but this has been my experience for the last year and a half.
Well before JB CM10 came out I'd say Eclipse was the most stable and best DD... Lol "avoiding it like the plague" is a bit overboard. But otherwise you are correct. To go to any other ROM it's time to SBF.
I definitely love the skin and feel of eclipse but I would like some more flexibility in terms of options, without overloading the overall device and making it sluggish again like stock.
Are any of the CM versions entirely stable and does everything work? Or they all have force close/non working parts?
Cm7 is pretty stable. The ones with the most bugs would be the CM9 based roms. CM10 JB is incredibly stable for the most part. You would never know it is an alpha. It runs very smoothly. There are problems installing some apps from gplay until alpha 2 is released but if you have titanium backups of your apps you can restore most if not all of them. It's only a work around but its good for now. I'm using CM10 as my daily driver (came from Eclipse.)
GoClifGo05 said:
Cm7 is pretty stable. The ones with the most bugs would be the CM9 based roms. CM10 JB is incredibly stable for the most part. You would never know it is an alpha. It runs very smoothly. There are problems installing some apps from gplay until alpha 2 is released but if you have titanium backups of your apps you can restore most if not all of them. It's only a work around but its good for now. I'm using CM10 as my daily driver (came from Eclipse.)
Click to expand...
Click to collapse
that sounds promising. is it specific to the x2 in regards to the soft buttons? (as we already have hard buttons and the baked in ones dont really make sense)
Hi all,
This is the first time I've tried installing a custom ROM on my VZW S4 (i545) (MDK firmware. Yes, I held out on the OTA since May). I've got a few thoughts and a couple of questions I was hoping could be addressed. I consider myself familiar with flashing ROM's and whatnot, so I won't need hand-holding steps in answer to my questions.
Some info:
VZW S4
MDK Firmware
Recovery: OUDhs CWM Touch Req0very v1.0.3.5
I haven't taken any OTA since I got the phone back in May. This leads me to believe (correct me if I'm wrong) that I'm on Android 4.2.2?
Current ROM: AOKP Nightly Build for 10/31/2013 (MR2)
Thoughts: Holy hell, this ROM is BLAZING fast. I am missing a few features, but none I use regularly (I don't use any of the TouchWiz "smart" features. Damn battery hogs). I was able to flash this over and install GAPPS without any problems. Loading time is incredible, and I love how clean the interface is.
Questions:
Can anyone help me figure out why I cannot install CM10.2? Not sure if that's because I downloaded the wrong version or something, but after flashing it, the screen stays stuck at the Galaxy S4 logo and doesn't move. Maybe I didn't wait long enough, but it surely didn't move in any reasonably expected time (AOKP, by comparison, loaded probably <1 minute). Any thoughts on why this might be? I really want to try CM10.2, so perhaps I should try a different build?
Another question/concern: I downloaded a few different ROMs last night -- CM10.2, AOKP and st0ckdr0id. AOKP installed fine, CM10.2 froze up, but when I installed st0ckdr0id (after wiping out, of course), I got what I think is referred to as a kernel panic. The message was similar to "This phone has software installed on it that Verizon Wireless has determined to be unsafe. Please power off the phone and take to the nearest Verizon Wireless store for help". In the top-left corner, it had in bold RED letters "Kernel secure: FAIL" (or similar wording). I fixed this by booting back into recovery, wiping out, and then installing AOKP again. Can anyone help me understand why this happened?
Why is only ~10GB of space still available when I -thought- I wiped out everything?
What I'm really searching for is an AOSP ROM that is very clean and light, but has SOME of the TouchWiz features. Any recommendations?
My phone only shows me as having a 3G connection, where normally I have 4G LTE. Anything I can do to fix this? Is this an issue with the ROM not detecting the right kind of radio? Bug report, perhaps?
I can't mount my external_sd in my CWM anymore. Yes, I used to be able to do it at one point, because I've done an external nandroid backup to it from within CWM in the past (as of October 29th, if the date on the backups is correct). I've read in other Google searches that it has something to do with the formatting of the SD card, but I haven't removed that SD card from my phone in a few months to have adjusted anything to do with formatting. I plugged the memory card into my Linux laptop this morning while diagnosing this and got an error about an unknown exfat partition. Any advice would be greatly appreciated.
Stupid question: Is there a way to -completely- wipe my internal SD card clean of all my current files? I know when I "wipe" /data I can still see all of my files from the previous installation, and I'm not ballsy enough to wipe /sdcard. I guess the question that then coincides with this is if I were able to completely wipe the phone, I assume that would wipe the recovery as well?
Sorry for some of the novice questions -- I have no problem messing with my old TF300T tablet (because NVFlash will save the day), but this is my only phone, only line of communication and SOLE way for me to answer calls for work (24/7 rotating on-call), so it is VERY important to me to ask questions and not go down for more than 1 hour.
Thanks for all help guys, its much appreciated. I hope to be able to test ROMs regularly and maybe start posting video reviews or something, who knows?
Thanks,
Opethfan89
opethfan89 said:
Hi all,
This is the first time I've tried installing a custom ROM on my VZW S4 (i545) (MDK firmware. Yes, I held out on the OTA since May). I've got a few thoughts and a couple of questions I was hoping could be addressed. I consider myself familiar with flashing ROM's and whatnot, so I won't need hand-holding steps in answer to my questions.
Some info:
VZW S4
MDK Firmware
Recovery: OUDhs CWM Touch Req0very v1.0.3.5
I haven't taken any OTA since I got the phone back in May. This leads me to believe (correct me if I'm wrong) that I'm on Android 4.2.2?
Current ROM: AOKP Nightly Build for 10/31/2013 (MR2)
Thoughts: Holy hell, this ROM is BLAZING fast. I am missing a few features, but none I use regularly (I don't use any of the TouchWiz "smart" features. Damn battery hogs). I was able to flash this over and install GAPPS without any problems. Loading time is incredible, and I love how clean the interface is.
Questions:
Can anyone help me figure out why I cannot install CM10.2? Not sure if that's because I downloaded the wrong version or something, but after flashing it, the screen stays stuck at the Galaxy S4 logo and doesn't move. Maybe I didn't wait long enough, but it surely didn't move in any reasonably expected time (AOKP, by comparison, loaded probably <1 minute). Any thoughts on why this might be? I really want to try CM10.2, so perhaps I should try a different build?
Another question/concern: I downloaded a few different ROMs last night -- CM10.2, AOKP and st0ckdr0id. AOKP installed fine, CM10.2 froze up, but when I installed st0ckdr0id (after wiping out, of course), I got what I think is referred to as a kernel panic. The message was similar to "This phone has software installed on it that Verizon Wireless has determined to be unsafe. Please power off the phone and take to the nearest Verizon Wireless store for help". In the top-left corner, it had in bold RED letters "Kernel secure: FAIL" (or similar wording). I fixed this by booting back into recovery, wiping out, and then installing AOKP again. Can anyone help me understand why this happened?
Why is only ~10GB of space still available when I -thought- I wiped out everything?
What I'm really searching for is an AOSP ROM that is very clean and light, but has SOME of the TouchWiz features. Any recommendations?
My phone only shows me as having a 3G connection, where normally I have 4G LTE. Anything I can do to fix this? Is this an issue with the ROM not detecting the right kind of radio? Bug report, perhaps?
I can't mount my external_sd in my CWM anymore. Yes, I used to be able to do it at one point, because I've done an external nandroid backup to it from within CWM in the past (as of October 29th, if the date on the backups is correct). I've read in other Google searches that it has something to do with the formatting of the SD card, but I haven't removed that SD card from my phone in a few months to have adjusted anything to do with formatting. I plugged the memory card into my Linux laptop this morning while diagnosing this and got an error about an unknown exfat partition. Any advice would be greatly appreciated.
Stupid question: Is there a way to -completely- wipe my internal SD card clean of all my current files? I know when I "wipe" /data I can still see all of my files from the previous installation, and I'm not ballsy enough to wipe /sdcard. I guess the question that then coincides with this is if I were able to completely wipe the phone, I assume that would wipe the recovery as well?
Sorry for some of the novice questions -- I have no problem messing with my old TF300T tablet (because NVFlash will save the day), but this is my only phone, only line of communication and SOLE way for me to answer calls for work (24/7 rotating on-call), so it is VERY important to me to ask questions and not go down for more than 1 hour.
Thanks for all help guys, its much appreciated. I hope to be able to test ROMs regularly and maybe start posting video reviews or something, who knows?
Thanks,
Opethfan89
Click to expand...
Click to collapse
Wow that's a lot. Let's see if we can get you answers.
1. Switch recoveries to twrp 2.5.0.2. I can't stress the importance of the particular version enough. There are others. This is absolutely the most stable. It's what the devs use. I think then your cm issue will be resolved.
Correct way to wipe with twrp.
1.wipe - >factory reset.
2. Advanced wipe - >check system, data, davlik, cache then wipe.
3. The go back to main screen and install rom.
2. Answered by answer one. Lots of people have lots of opinions about the various recoveries. All I can tell you is this is what all the devs use for their recovery. Can't argue with that.
3. Reserved space. It might say you have 16 gigs but a good size chunk is taking merely by formatting. Then the ROM and programs you have installed of course.
4. Honestly they are all freaking great. The aosp roms. You do the answer to number one and you can find out. DU is my fav @ this moment. Followed by beanstalk.
5. Go to mobile networks make sure your network mode is set to cdma +lte/evdo.
6. Answer 1.
7. You don't really want to wipe the entire internal SD card. Sounds good when you think it might screw you if you did it.
Sent from my Nexus 7 using xda app-developers app
Mightycaptain said:
Wow that's a lot. Let's see if we can get you answers.
1. Switch recoveries to twrp 2.5.0.2. I can't stress the importance of the particular version enough. There are others. This is absolutely the most stable. It's what the devs use. I think then your cm issue will be resolved.
Correct way to wipe with twrp.
1.wipe - >factory reset.
2. Advanced wipe - >check system, data, davlik, cache then wipe.
3. The go back to main screen and install rom.
2. Answered by answer one. Lots of people have lots of opinions about the various recoveries. All I can tell you is this is what all the devs use for their recovery. Can't argue with that.
3. Reserved space. It might say you have 16 gigs but a good size chunk is taking merely by formatting. Then the ROM and programs you have installed of course.
4. Honestly they are all freaking great. The aosp roms. You do the answer to number one and you can find out. DU is my fav @ this moment. Followed by beanstalk.
5. Go to mobile networks make sure your network mode is set to cdma +lte/evdo.
6. Answer 1.
7. You don't really want to wipe the entire internal SD card. Sounds good when you think it might screw you if you did it.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your response Mightycaptain! I used CWM as my first ever recovery and am kinda pressed on it, which is why I use it, but I have no issues going to TWRP if that means fixing my issues. Can you elaborate on how to install TWRP in place of my current CWM? I'll do some Googling in the meantime to try to find the answer myself. (I haven't done any flashing or rooting stuff since I got the phone in May!!)
Thanks for your answer in #5. Fixed the issue I was having.
My reason for wanting to wipe the entire internal SD card is there are still files, folders, logs and backups from when I had my previous ROM. I'm having issues restoring my nandroid backup from the night of the 7th so is it at all possible for me to salvage some of my settings, apps and file backups from those existing files? Once I fix my nandroid, I'm going to keep the nandroid backup in a safe place and I ideally want to have a completely clean phone to start from: That means getting rid of all those old files and other nonsense from before. Is this a possibility?
I'm going to spend my time today trying to extract data from my nandroid backups using ROM Toolbox Pro. If that doesn't work, I have a nandroid backup from the 31st that has 99% of the stuff I need so I'll try to restore that. If THAT doesn't work, then I'm going to cry myself to sleep while trying to remember all of my contacts
Wish me luck, and hopefully I can get some answers to my last few questions!
Thanks,
Opethfan89
opethfan89 said:
Thanks for your response Mightycaptain! I used CWM as my first ever recovery and am kinda pressed on it, which is why I use it, but I have no issues going to TWRP if that means fixing my issues. Can you elaborate on how to install TWRP in place of my current CWM? I'll do some Googling in the meantime to try to find the answer myself. (I haven't done any flashing or rooting stuff since I got the phone in May!!)
Thanks for your answer in #5. Fixed the issue I was having.
My reason for wanting to wipe the entire internal SD card is there are still files, folders, logs and backups from when I had my previous ROM. I'm having issues restoring my nandroid backup from the night of the 7th so is it at all possible for me to salvage some of my settings, apps and file backups from those existing files? Once I fix my nandroid, I'm going to keep the nandroid backup in a safe place and I ideally want to have a completely clean phone to start from: That means getting rid of all those old files and other nonsense from before. Is this a possibility?
I'm going to spend my time today trying to extract data from my nandroid backups using ROM Toolbox Pro. If that doesn't work, I have a nandroid backup from the 31st that has 99% of the stuff I need so I'll try to restore that. If THAT doesn't work, then I'm going to cry myself to sleep while trying to remember all of my contacts
Wish me luck, and hopefully I can get some answers to my last few questions!
Thanks,
Opethfan89
Click to expand...
Click to collapse
Check my post here for twrp 2.5.0.2.
http://forum.xda-developers.com/showthread.php?p=47275165
You can flash it in your current recovery. It overwrites CWM. I would make sure you have a flashable for CWM just in case you need to go back for some reason. Also the backups between those 2 recoveries are not compatible. But I would nandroid with CWM before flashing twrp. I would also change were you recovery is pointing to for storage to the external SD if you haven't already. After you have cut your current backup and past it there. You can use rom toolbox pro to back up your contacts and restore it once you flash a new ROM.
Now as good advice going forward I would add your contacts to your Google account. That way when you flash new stuff or drop your phone in the toilet as soon as you add your Google account to the phone all those contacts will automatically download. But it is always a good idea to use tibu or rom toolbox pro to back up all your apps and seeing and use that after flashing roms to restore apps and settings.
But honestly I'd nandroid, move my contacts to Google, make app backups. Flash twrp. Then start flashing roms. You could be doing it in an hour. After you flash twrp make another nandroid so you have a twrp compatible backup. Then in a day or so of you are happy with everything delete the CWM backups for space.
Edit: as to extracting things from your current nandroid. Not sure if that is possible for one thing it is compressed not sure how that would work unless you are doing a full restore.
Also for future reference with TWRP. When restoring nandroid wipe like your flashing a new rom before restoring.
Sent from my SCH-I545 using xda app-developers app
Mightycaptain said:
Check my post here for twrp 2.5.0.2.
http://forum.xda-developers.com/showthread.php?p=47275165
You can flash it in your current recovery. It overwrites CWM. I would make sure you have a flashable for CWM just in case you need to go back for some reason. Also the backups between those 2 recoveries are not compatible. But I would nandroid with CWM before flashing twrp. I would also change were you recovery is pointing to for storage to the external SD if you haven't already. After you have cut your current backup and past it there. You can use rom toolbox pro to back up your contacts and restore it once you flash a new ROM.
Now as good advice going forward I would add your contacts to your Google account. That way when you flash new stuff or drop your phone in the toilet as soon as you add your Google account to the phone all those contacts will automatically download. But it is always a good idea to use tibu or rom toolbox pro to back up all your apps and seeing and use that after flashing roms to restore apps and settings.
But honestly I'd nandroid, move my contacts to Google, make app backups. Flash twrp. Then start flashing roms. You could be doing it in an hour. After you flash twrp make another nandroid so you have a twrp compatible backup. Then in a day or so of you are happy with everything delete the CWM backups for space.
Edit: as to extracting things from your current nandroid. Not sure if that is possible for one thing it is compressed not sure how that would work unless you are doing a full restore.
Also for future reference with TWRP. When restoring nandroid wipe like your flashing a new rom before restoring.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Hey thanks again for your quick response!! I'm glad I checked this first, because I'm in my ROM Toolbox app atm and it has an option to let me install TWRP 2.5.0.2 from within the app itself. Should I do it this way?
I will be adding all contacts to Google from now on. Unfortunately I saved all my stuff to my Verizon backup assistant so I just need one last shot at my phone to save all those contacts (manually, if I must) and be able to enter them onto the new ROM.
By "flash it in your current recovery" I assume you mean download the .zip, place it on my internal /sdcard, and then "flash" it just like I would flash a ROM, right?
I'm sure I have a "flashable" for CWM somewhere but like I said, I haven't done any of this stuff on this phone since I first bought it, and things have changed so much with everyone having OTA's and being locked out that I'm not sure what process is the same or what has changed. I can't afford to lose this phone so I'm hesitant to go balls to the wall to try things.
I will try the things you've listed here. Seems like a nandroid + TiBu + Google Contacts is my best bet to get up and running each time I decide to try a new ROM.
Thanks again!
opethfan89 said:
Hey thanks again for your quick response!! I'm glad I checked this first, because I'm in my ROM Toolbox app atm and it has an option to let me install TWRP 2.5.0.2 from within the app itself. Should I do it this way?
I will be adding all contacts to Google from now on. Unfortunately I saved all my stuff to my Verizon backup assistant so I just need one last shot at my phone to save all those contacts (manually, if I must) and be able to enter them onto the new ROM.
By "flash it in your current recovery" I assume you mean download the .zip, place it on my internal /sdcard, and then "flash" it just like I would flash a ROM, right?
I'm sure I have a "flashable" for CWM somewhere but like I said, I haven't done any of this stuff on this phone since I first bought it, and things have changed so much with everyone having OTA's and being locked out that I'm not sure what process is the same or what has changed. I can't afford to lose this phone so I'm hesitant to go balls to the wall to try things.
I will try the things you've listed here. Seems like a nandroid + TiBu + Google Contacts is my best bet to get up and running each time I decide to try a new ROM.
Thanks again!
Click to expand...
Click to collapse
Understand the hesitancy completely. But with nodding comes risk. It is always about whether you can accept the worst possible outcome.
Rom toolbox pro flashing recovery? I don't know never tried it.
Yes I would download the recovery. Leave it on SD card reboot to recovery and flash like a rom.
Yes nandroid tibu and saving your contacts to Google is the quickest way to get up and running again.
Sent from my SCH-I545 using xda app-developers app
Mightycaptain said:
Understand the hesitancy completely. But with nodding comes risk. It is always about whether you can accept the worst possible outcome.
Rom toolbox pro flashing recovery? I don't know never tried it.
Yes I would download the recovery. Leave it on SD card reboot to recovery and flash like a rom.
Yes nandroid tibu and saving your contacts to Google is the quickest way to get up and running again.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Mighty, just wanted to report that flashing TWRP 2.5.0.2 from within ROM Toolbox Pro worked like a charm. I'm on TWRP as we speak.
Thank you so much for your responses. If anyone else has anything to add, or a different response to my questions, please do so! In the meantime, I'm going to try to figure out how to get my nandroid backup working...
Cheers!
*EDIT* Made a backup with TWRP (whose interface is bloody phenomenal, btw), flashed CWM and its working like a charm!! Going to try the st0ckdr0id one as well. Still working on getting that nandroid working so I can recover my stuff and get to customizing!