Related
Dear friends
I was tring to upgrade my iMate Pocket PC also know as Himalaya with windows2003 SE , while upgrading I faced problems, the upgarde failed and now I am just getting no display and OS too. The only message displayed is
Serial
v1.03
nothing is working please help
bye with regrads,
your unit is still okay; even better that the usb version is showing on the screen. it's simply stuck on bootloader mode. what kind of problems did you encounter resulting in the failed upgrade?
one suggestion i can give before you downgrade is to try and proceed with the upgrade to se. put your unit back on the cradle but don't expect activesync to "recognize" the device. just put it back on the cradle and rerun the upgrade to se.
same thing happened when i upgraded but to wm2005. the screen showed error and the only thing on the screen was the usb version. i simply cradled back the unit and ran the upgrade. worked.
cheers
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
oh, it appears that you have the "wrong country" id issue. i'm not entirely sure as to how to avoid this but i believe it has something to do with the correct rom version (guys, correct me if i'm wrong). where did you get the rom you used for upgrading to se? downgrading might be the only trick if there is no rom for saudi-based users...but if any chaps presently living there and were successful in upgrading their units perhaps you could share the rom version/s you used?
cheers
yasirirfan said:
Hi
Thanks a lot, i tired those steps before and even now I did but its not upgarding I am gettig following error as show i the attachment. Please let me know what to do
thanks a lot
yas
Click to expand...
Click to collapse
To overcome the Country ID Error, first you need to install this tool...
ftp://xda:[email protected]/Tools/ER2003Edit_1_4_26.zip
Open the ROM file you want to upgrade, then change the appropriate 'Operator ID' code, after this click 'Save ROM image'.
Upgrade ur device. You will no longer face the error message.
after upgread 4% and stop now dead can't boot loader
how can i do
Sorry to hear you are having trouble!
At the top of the page is a sticky thread titled "dead hermes? corrupted radio? Post comments here". Read it and follow the instructions for posting your problem and required information there, and the experts will offer advice.
You should also read the wiki and other threads as the solution may already be here.
Hopefully you read and followed the upgrade guide, if so then you have the latest SPL from Oli which means your device can most likely be recovered easily!
i read now but my pocket can't put boot loader
noe i confuse
thank for reply
kittypao said:
i read now but my pocket can't put boot loader
noe i confuse
thank for reply
Click to expand...
Click to collapse
for someone claiming to be in the US, your English is atrocious.
thanks for yet again failing to tell us anything, assuming that the people here are all magic psychics who can somehow tell you how to fix your phone based on the sole information of "can't access bootloader".
by the way, if you actually can't get the bootloader going, your phone is ****ed.
Olipro said:
for someone claiming to be in the US, your English is atrocious.
thanks for yet again failing to tell us anything, assuming that the people here are all magic psychics who can somehow tell you how to fix your phone based on the sole information of "can't access bootloader".
by the way, if you actually can't get the bootloader going, your phone is ****ed.
Click to expand...
Click to collapse
I agreed with Olipro...your phone is 100% dead. Send it to a repair shop. hmm.... I am wondering if our Hermes has JTAG capability. It will be nice if there's a JTAG port so people could recover their phones without sending it out for repair.
thank all for reply
Hi to everybody, I have a great problem.
I was upgrading my Tytn to WM6 Black (Dymond) when at about 30% an error occurred: it said that the cable wasn't connected. My device only showes the three color screen, the PC doesn't recognize it any more and I don't know how to solve this problem. Is possible to get my hermes back to the normal status?
Please help me.
Thak you all,
Giangi.
Please read the WIKI and provide more info, SPL?
These are my info:
I tried to upgrade (that wasn't my first upgrade) my Tytn to WM6 black, and I don't know why or how, it stopped upgrading (maybe at 30%...i don't remember because of little panic). I tried to upgrade again but it always stopeed. Then I disconnected the device and it has never booted any more. Now I can only see a screen with 4 colored strips. That's all.
No hard reset, no soft reset. Nothing seems to work.
Please, is there abybody could help me?
I can only put my Tytn in bootloader mode. As Windows XP doesn't recognize it any more, is possible to upgrade the device in that mode? I would try to do it.
Please give me a hand...
Read this to unbrick
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Answer questions 1 to five then look at the table for the proper solution.
I'm not sure if this would work out, but you can also give this one a try. See problem number 4
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Good Luck
Thank you, I'll try to take a look later.
Let's hope for the best...
Hi again, I have a question: is possible to flash the ROM in bootloader mode?
for example using mtty?
I can't find any useful info for me...
dude, all the info you need is in the links that pedro2k gave
People please refer to the relevant threads on this topic, all the info required is already available.
Hi,
I purchased the Softbank X01HT (post Dec) in Japan when i was working in Japan. I lived with the Japanese OS even though i don't understand Japanese because I didn't want to temper with it just incase something goes wrong and i can't use the phone. Well, now im back in Australia ... and i need to unlock it and flash a new ROM to it so that I can use it in Australia .. otherwise.. it is effectively a brick....
so.. i spent the past two days reading all the valuable information u guys provided... and in the end.. i decided to first unlock and superCID my phone using the AUTO_Unlock_v3a.bat provided by POF ... and then flash it with the Jasjam telstra ROM (RUU_Hermes_DL_UK_3[1].62.305.5_6275_1.54.30.10_108_Ship.exe) also found in this forum which received good feedbacks...
ok... after i executed the AUTO_Unlock_v3a.bat program .. everything went well... and at the end of it.. the screen even said.. successful in both unlock and superCID ... so.. i assumed that my phone is unlocked...
then... i went to flash my phone with the abovementioned jasjam ROM .. and this too.. everything went just fine ... and now.. my phone is working with this new ROM (cool! first time im able to read my x01ht coz its in English) ...
without a sim.. the OS works fine.. etc etc...
however, when i tried to put a telstra sim card in it ... its still simlocked ...
the SimLock screen comes up and requests me to input unlock code ...
so.. i did more reading and researched but can't find any solution to this ... i even tried that "unlock" code (22051978) but it doesnt work ...
Please.. can someone help me with this issue with my phone? now.. it seems that i just need to unlock my phone to use it as my jasjam ROM is working fine. Below are further details:
ROM version: 3.62.305.5
ROM date: 11/06/07
Radio version: 1.54.30.10
EtRom version: 3.62.305.116
any help/comments will be highly appreciated... thanks in advance...!
read somewhere that if you let the softbank go through the 1st boot and it installs all the extra stuff you wont EVER be able to unlock it again. some one else may need to clarify this but apparently you need to soft reset after you've reached the today screen but before the customisations start. if you didnt do this then you probably wont be able to unlock it. sorry if this is wrong/bad news.
Hope someone else can corroborate this.. cheers...
thanks for your reply ultramag69 although i hope that u r wrong.. hahaha
fingers crossed ... hopefully.. positive news from some experts ...
After re-reading the posts, i cannot find that I did anything wrong.
This link "http://forum.xda-developers.com/showthread.php?t=293665" states that the unlocker v3a "can be used in all HTC Hermes devices, no matter which bootloader version the device is running", with the exception of "x01ht post April devices" (i.e., white x01ht).
However, my x01ht is black and is a pre-April device.
So, I am still not sure what is wrong. Please help please help any experts out there ...
POF ... if you are there.. please help ... i need your expert advice thank you in advance.
ultramag69, i think that you are referring to this "http://forum.xda-developers.com/showthread.php?t=301952".
Quote:
"Here's how to unlock the new batch of SoftBank X01HT devices with radio 1.14.01.10.
This process is ONLY valid for new devices which have never turned on or let the SoftBank Extended ROM install.
If you have already let the ExtROM install you CAN'T sim-unlock it."
Fortunately, i find that this does not apply to me because my phone is not post april. Also, originally, my radio was never 1.14.01.10. It was 1.14.00.10.
help..........
snowboarder said:
Hi,
I purchased the Softbank X01HT (post Dec) in Japan when i was working in Japan. I lived with the Japanese OS even though i don't understand Japanese because I didn't want to temper with it just incase something goes wrong and i can't use the phone. Well, now im back in Australia ... and i need to unlock it and flash a new ROM to it so that I can use it in Australia .. otherwise.. it is effectively a brick....
so.. i spent the past two days reading all the valuable information u guys provided... and in the end.. i decided to first unlock and superCID my phone using the AUTO_Unlock_v3a.bat provided by POF ... and then flash it with the Jasjam telstra ROM (RUU_Hermes_DL_UK_3[1].62.305.5_6275_1.54.30.10_108_Ship.exe) also found in this forum which received good feedbacks...
ok... after i executed the AUTO_Unlock_v3a.bat program .. everything went well... and at the end of it.. the screen even said.. successful in both unlock and superCID ... so.. i assumed that my phone is unlocked...
then... i went to flash my phone with the abovementioned jasjam ROM .. and this too.. everything went just fine ... and now.. my phone is working with this new ROM (cool! first time im able to read my x01ht coz its in English) ...
without a sim.. the OS works fine.. etc etc...
however, when i tried to put a telstra sim card in it ... its still simlocked ...
the SimLock screen comes up and requests me to input unlock code ...
so.. i did more reading and researched but can't find any solution to this ... i even tried that "unlock" code (22051978) but it doesnt work ...
Please.. can someone help me with this issue with my phone? now.. it seems that i just need to unlock my phone to use it as my jasjam ROM is working fine. Below are further details:
ROM version: 3.62.305.5
ROM date: 11/06/07
Radio version: 1.54.30.10
EtRom version: 3.62.305.116
any help/comments will be highly appreciated... thanks in advance...!
Click to expand...
Click to collapse
hey bro!when you r already flashed v3a unlock,than you should down a software name like "Hard-SPL-V7",it will help you to unlock the exrom,make you able to flash the new os\rom...
"HARD-SPL-V7" has 2 software,1st is "RUU_signed.nbh",2nd is "RUUWrapper.exe".
devileric, read post carefully. snowboarder has no problem with reflashing oses, its the sim that needs unlocking now and hard spl WONT do that...
Still reading and researching. I'd probably retry the unlock tool. it cant hurt but may work... cheers
devileric ... yes ... ultramag69 is correct ... my new English Telstra Jasjam OS works like a beauty when it operates WITHOUT a sim card. However, when i try to insert a telstra (or optus) sim card in there, there is a prompt that requires me to enter a unlock code. Please note that the unlock code 22051978 does NOT work in this case (also doesnt work in alot of other cases that i read in this forum).
Ultramag69, thank you for your help and replies, much appreciated. I actually did try the unlocking program again (three times ) . However, when i execute the AUTO_Unlock_v3a.bat when my OS is the new telstra jasjam OS, my phone will freeze on the telstra startup screen after the radio update step of the unlocking program when it automatically resets. Thereafter, even when i perform soft reset again and again, it will just freeze there. When that happened the first time, I thought that I bricked my phone .. ahhaha.. but fortunately, I was able to simply go to the tri-color boot screen and then simply flash the above said telstra Jasjam ROM. This will get me back to square one, i.e., working Jasjam OS, but phone is still sim locked.
I spent another night last night reading the applicable threads. I find that quite afew other people had the same problem as me. And I also find that whenever such problem is posted, its either ignored or a moot reply is given.
So, for the experts out there, if there is a solution to this, please kindly let me know. I am sure it will others will find it helpful too. Thank you.
Sorry wrong post
Hello guys...
first of all, excuse me for my bad english...I'm not an oxford student
I got a topaz from a friend to remove the russian language and flash a german ROM.
He knows that I know much about Android and flashing etc. But I didn't know that it will be harder to understand WinMob than understanding Android.
I'm stuck with the Hard-SPL. How I said before, this phone is Russian and I don't understand anything...The automatic flasher gives me this:
"Sorry, the Hard-SPL process closed early due to an error..."
After that, i copied the necessary file for manual flashing into the phone, executed it and started the manual mode, which gives me the 260 CONNECTION error.
Phone is connected and sync. Installing the enabler*.cab didn't help.
I don't know which information you will need. So, I will now write down what I think could be important.
Tricolor-Screen:
TOPA100 32M
SPL-1.33.0000
Under the battery:
HTC Touch Diamond2 T5353 RUS
White field says "USB", I think this is supposed to be important.
So...What do you suggest? I promised him to bring him his new, cool phone tomorrow... I think I can forget that
What should I do now? Thank you in advance...
geminga said:
Hello guys...
first of all, excuse me for my bad english...I'm not an oxford student
I got a topaz from a friend to remove the russian language and flash a german ROM.
He knows that I know much about Android and flashing etc. But I didn't know that it will be harder to understand WinMob than understanding Android.
I'm stuck with the Hard-SPL. How I said before, this phone is Russian and I don't understand anything...The automatic flasher gives me this:
"Sorry, the Hard-SPL process closed early due to an error..."
After that, i copied the necessary file for manual flashing into the phone, executed it and started the manual mode, which gives me the 260 CONNECTION error.
Phone is connected and sync. Installing the enabler*.cab didn't help.
I don't know which information you will need. So, I will now write down what I think could be important.
Tricolor-Screen:
TOPA100 32M
SPL-1.33.0000
Under the battery:
HTC Touch Diamond2 T5353 RUS
White field says "USB", I think this is supposed to be important.
So...What do you suggest? I promised him to bring him his new, cool phone tomorrow... I think I can forget that
What should I do now? Thank you in advance...
Click to expand...
Click to collapse
the following questions will be about the Automatic mode (not Manual mode):
is the only error you get is the early close error, after pressing "OK" for preparing to flash? if yes, what OS version are you running (and is it physical installation of Windows)? and what do you see on phone screen? also, exact error text = ?
Hi, thank you for your reply.
I'm using Win7 x86, not virtual or something.
After "Preparing to flash, please press OK now and wait" I get a Fatal Error
"Hard-SPL is for non-commercial....." It tells me that I used it before, what I definitively did not.
After that the following pops up:
nobody any idea?
I now flashed
RUU_Topaz_S2_HTC_RUS_2.53.411.3_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship
trying Hspl-flasher again...
doesn't work. automatic mode fails the same way, and manual mode comes with congrats for flashing hard-spl once i click the button. but tricolor doesn't show me any hard-spl...
i don't know what to do with this piece of §#$X
geminga said:
Hi, thank you for your reply.
I'm using Win7 x86, not virtual or something.
After "Preparing to flash, please press OK now and wait" I get a Fatal Error
"Hard-SPL is for non-commercial....." It tells me that I used it before, what I definitively did not.
After that the following pops up:
Click to expand...
Click to collapse
you need to send a ticket at http://support.htc-unlocks.com/ to get a free license (for personal use). note, when you send it, you should get a confirmation email with the ticket number, be sure to keep that.
Alright, I will check it out, but those tickets are for purchased stuff or not?
geminga said:
Alright, I will check it out, but those tickets are for purchased stuff or not?
Click to expand...
Click to collapse
as said, free for personal use.
Alright, its done.
I there any other way to flash a german ROM on that russian phone?
Soft-spl or something?
geminga said:
Alright, its done.
Click to expand...
Click to collapse
you got reply to your message
HI i got the same problem can u help me 2 but from german to english ??
farooq88 said:
HI i got the same problem can u help me 2 but from german to english ??
Click to expand...
Click to collapse
it would be best to post in the Hard-SPL thread.. please post in that thread telling us: what is your exact issue? did you try Hard-SPL and you had some error? what was it?
thread is here: http://forum.xda-developers.com/showthread.php?t=520312
[/QUOTE]
I'm stuck with the Hard-SPL. How I said before, this phone is Russian and I don't understand anything...The automatic flasher gives me this:
"Sorry, the Hard-SPL process closed early due to an error..."
[/QUOTE]
I'm stuck with the Hard-SPL. How I said before, this phone is Russian and I don't understand anything...The automatic flasher gives me this:
"Sorry, the Hard-SPL process closed early due to an error..."
[/QUOTE][/QUOTE]
can you quote the rest of the message please ?
do u know u can read the rest on the 1st page ????
farooq88 said:
do u know u can read the rest on the 1st page ????
Click to expand...
Click to collapse
so it said "commercial error"?
http://support.htc-unlocks.com/
you have to send us a ticket with the phone's imei to get it enabled - free for personal use.
link: http://support.htc-unlocks.com