I just began to compile from source for the first legitimate time tonight, legitimate as in, every time before I had syncing errors or other errors and said screw it. Anyways, when I go to sync my repo, it has been over an hour now, and it has just stopped. It hasn't gone back to a command line or anything, just stopped where it was. If I go in and sync it again, and it was not finished, will it simply begin where it left off, or will it start completely over again and take another couple hours?
It will start over, but recognizes you already synced a lot and will skip that.
Greets!
do I need to repo init again? because now when I try to type repo sync, nothing happens.
Sent from my Transformer TF101 using xda premium
well I had shut down my computer and now when I turn it on there is no ~/bin or ICS_SOURCE. WTF?
Just reinstall repo in bin and do repo sync in the source folder
Uhm if u lost the source folder you have to redo repo init too
Sent from my HTC Desire HD using xda premium
Related
I've tried several times to log into htcsense.com, but it won't let me. Is it still closed or something?
log in, yes...get features such as locate,make phone ring etc to actually work, NO
myersn024 said:
I've tried several times to log into htcsense.com, but it won't let me. Is it still closed or something?
Click to expand...
Click to collapse
I have been able to log in all the time, but getting the features to work is another story. I have been able to get them to work exactly two times. Once, on the first day I got it on June 22nd on initial setup. The other time was maybe a couple days later. I tried locking the phone via the site but nothing happened. Around 5 or 6 hours later when I got home from work, looked at my phone and it had just locked itself. Nothing since then
EDIT: Just deleted and readded my htcsense account and can now get the ring phone function to work. Location gives an error. Tried locking again and it seems like the request went through. I am guessing my phone will lock itself in a few hours, lol
I use dolphin browser to get on in my phone , and it works , but I had set up since the first port of my og EVO so no problems hhere
Sent from my PG86100 using Tapatalk
Phone ring works every time. It's instant.
Same here, I can login but nothing works.
I'm able to log in, but htcsense.com thinks the device finder on my phone is disabled even though it is not. I logged a ticket with HTC a week or so ago and they replied saying that they've seen an unexpected volume and it is a known issue, etc.
I was able to create an acct, but during the verifiy device stage, it tells me to log in to HTC Sense... wtf? There's no selection for that in "SetUp" Only FB for sense and twitter for sense...
dagnasty said:
Just deleted and readded my htcsense account and can now get the ring phone function to work. Location gives an error. Tried locking again and it seems like the request went through. I am guessing my phone will lock itself in a few hours, lol
Click to expand...
Click to collapse
same thing with me now...
How do you delete the account and create another? No functions are working for me, I am able to login.
Sent from my PG86100 using XDA App
It worked fine for me, however there's a big delay. Just download SeekDroid for 99c. Best app for what you're looking for, EVER. You don't need root. You can wipe (everything, including SD card)/enforce or remove a password/track your phone almost INSTANTLY on Google Maps/alarm, grab a list of recently made, received, or missed calls AND the IMEI/ESN of the phone. Plus there's a mobile interface so you can hop on your buddy's phone if your phone is lost and there's no computer around.
I've been trying since this morning to add my Gmail a/c to [ROM] [2.3.5] [7/29/11] Trigger Redux ยป Build 17 but evertime I try I keep getting an error which says " unable to finish setup" and it cant establish a connection the the Server.........I've check the wifi and its working ok so am clueless right now Please advice thx
Fixed it lol yeah
Google has air conditioning now? What will they buy up next!
I'm guessing you forgot to flash g apps
Sent from my SGH-T959 using XDA App
Flash or re-flash Gapps first and then a whole series of syncing appears. You should be good after that.
Has anyone had any luck mounting a cifs/nfs share?
Sent from my GT-I9000 using xda premium
I got cifs working using one of the guides someone posted (I cant post the link yet just google 'How To: Connect TP to network shares') and it was pretty straight forward. The only problem is that I have to mount it each time I restart the device which is more of a hassle than anything else. I had no luck with nfs to mount, but my technical knowledge of that comes from setting up nfs shares with my wdtv player so its very limited.
Did you use uberkernel or f15c? I'll try that search shortly
Sent from my GT-I9000 using xda premium
I have the f15c installed.
what I did
Here is the link to get the testing kernels in PreWare
http://www.webos-internals.org/wiki/Testing_Feeds
here is the link to do some of the CIFs mounting... I did something different to get the initial mount
http://forums.precentral.net/hp-touchpad/290642-how-connect-tp-network-shares.html
Now for the command line I did the following:
option 1
open WebOS quickinstaller.jar
click tools
select Linux Commandline
option 2
on a windows machine goto C:\Program Files\Palm, Inc\terminal>
run novaterm.bat
in the new window click file, then connect
Now that you are in the command line you can use the mount.cifs command
/usr/sbin/mount.cifs (mount.cifs is executable so run it and it will tell you the usage)
/usr/sbin/mount.cifs //device/share /mnt/yourlocaldirectory -o user=username,password=yourpassword
now this won't persist a reboot, so what you'll have to do is edit the /etc/fstab
I used VI from the shell we opened earlier. If you don't know how to use VI then find VIMTutor on your googlebox and get a quick test run
vi /etc/fstab
add the following
//device/share /mnt/yourlocaldirectory cifs username=username,password=yourpassword _netdev 0 0
Save that and reboot and see what happens.. I'm working on getting this to persist a reboot at the moment.
great. thanx. cant wait for update...no persist after reboot yet. THANX
That fit333 and flower doesnt show up in the web version for me or when i edit the post... Weird.
Sent from my GT-I9000 using xda premium
groves226 said:
Save that and reboot and see what happens.. I'm working on getting this to persist a reboot at the moment.
Click to expand...
Click to collapse
perhaps there is a way, once you install bash or sh to run this by adding
#!/bin/bash <- or whever it installs
mount-a
exit 0
to an rc.local file same as on linux ?
I wish, but there is no rc.local, and no cron. One of the guys I work with gave me an idea... I forgot what it is but I won't have free time to try until friday. Any more ideas would be greatly helpful.
Sent from my GT-I9000 using xda premium
streaming from network shares
maybe it's a little bit off topic, let me know...
I tried to play a video from a freshly mounted network share with Touchplayer and it was very laggy. I haven't tried with a local copy yet
I tried to play a song from the network also and the default player wouldn't play
Am I doing something wrong?
Touchplayer uses the cpu instead of the gpu, so it could yave been either the cpu causeing the lag or the network. For the music file, not sure.
Now when mounting a network share, the default media players for the TP only look in certian directories for media, so that also coupd have been a reason for not working when you tried the music.
For the next try at mounting on a reboot it was recomended at work to add 'mount -a' to /etc/profile. I wont be able to try until friday, but if someone else can then kick ass and let the rest of us know if it works.
Sent from my GT-I9000 using xda premium
Gave /etc/profioe a shot... No joy. Today I'm going to try to add a script to /etc/profile.d/ and will see what happens
Sent from my GT-I9000 using xda premium
http://forums.precentral.net/hp-touchpad/290642-how-connect-tp-network-shares-4.html#post3128848
It make it possible to use kalem media player. 720p works fine for me over wlan.
The link in there for making mounts perm, it uses /etc/profile.d... That should work (and I bet does since it is linked) to get done what this thread is trying to do.
Kick ass glad someone got a fix i havnt had the time this week to do too much tinkering.
Sent from my GT-I9000 using xda premium
Hey guys, I'm currently downloading and sycning the CM10 repo through a VM and sometimes the terminal shows for example -
"Receiving objects 89% (103/130)"
and it then skips past that and almost everything else syncs to 100%. Is that normal? Or is that an error and do I have to restart the whole sync?
I'm also in a part of the house with somewhat crappy wifi signal, should I move somewhere with better signal to ensure everything downloads to 100%? Or is this normal behavior?
It's my first time compiling from source
ZaySk said:
Hey guys, I'm currently downloading and sycning the CM10 repo through a VM and sometimes the terminal shows for example -
"Receiving objects 89% (103/130)"
and it then skips past that and almost everything else syncs to 100%. Is that normal? Or is that an error and do I have to restart the whole sync?
I'm also in a part of the house with somewhat crappy wifi signal, should I move somewhere with better signal to ensure everything downloads to 100%?
Click to expand...
Click to collapse
As long as it keeps syncing don't worry about it.
dastin1015 said:
As long as it keeps syncing don't worry about it.
Click to expand...
Click to collapse
Thank you for the quick reply, it's 1:18AM where I am and I was planning on leaving my laptop on all night to let the sync finish. Glad I'm not gonna be worrying all night about whether it was a waste of time!
And I'd something doesn't syn properly...when your done just run repo sync again...it will check your current directory and update or receive what needs to updated or received
Sent from my HTC PH39100 using Tapatalk 2
When the sync is done do the files automatically show up in the pre-determined folder? Or are they hidden by default and in the .repo file? (I'm thinking they're only in the .repo file until the sync is complete, but I could be wrong)
ZaySk said:
When the sync is done do the files automatically show up in the pre-determined folder? Or are they hidden by default and in the .repo file? (I'm thinking they're only in the .repo file until the sync is complete, but I could be wrong)
Click to expand...
Click to collapse
In .repo until sync is done
Another question, I'm getting an error while syncing the repo.
remote:aborting due to possible repository corruption on the remote side
fatal:eof
fatal:index-pack failed
error:cannot fetch CyanogenMod/android_prebuilt
error: Exited sync due to fetch errors
How can I fix that? (If it can be fixed :\ )
Edit: Attached a pic to show what I'm talking about.
Try to run repo sync again...
Sent from my SGH-I997 using Tapatalk 2
mg2195 said:
Try to run repo sync again...
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
Tried multiple times, and the same error pops up. What a massive waste of bandwidth, I won't be able to attempt compiling from source again until next month due to BS bandwidth caps. (75GB/month between...6 of us) I really wanted to try compiling from source but it seems the repository is corrupt or my computer is being a bi*ch. Next time I'll try AOKP instead of CM10.
So I have an old Evo HTC and all I need to do is go in and grab the phone contacts
Why is this so hard? The phone is old and right now I am not sure of the make. I installed the sync, tried to sync to a sub folder i my contacts and continue to get sync errors. Has to be an easier way its 2012! HELPPPPPPPPP
Thanks
MF
Wrong forum, but there should be a export option in your phone book/contracts settings.
Michealtbh said:
Wrong forum, but there should be a export option in your phone book/contracts settings.
Click to expand...
Click to collapse
Tried hard to find the right one. I spent more time looking for the right one then asking the question.
I tried to export to sd card, which is in it and it fails to see it. It is a de activated phone.
this phone has given the end user issues since day 1
Ask in the Evo forums, I have no idea why you came here