Hi all,
I just flashed cm7 nightly #34 and it has been working quite well. However, the default kernel has the touch screen bug which lags when I hold the screen, especially during games. Overclocking causes flickering in the camera, while flashing paulo's kernel causes random blackscreens. I also have the FC issue on camera with Franco's kernel. (Might try again later). Is there any kernel I can try or ways to fix my problems? Help is greatly appreciated.
try rom nightly fourE! !!!!
jasonwsc said:
Hi all,
I just flashed cm7 nightly #34 and it has been working quite well. However, the default kernel has the touch screen bug which lags when I hold the screen, especially during games. Overclocking causes flickering in the camera, while flashing paulo's kernel causes random blackscreens. I also have the FC issue on camera with Franco's kernel. (Might try again later). Is there any kernel I can try or ways to fix my problems? Help is greatly appreciated.
Click to expand...
Click to collapse
Hey dude try the rom nightly fourE which is awesome it is based on cm7 nightly! Try the. Stable version with franco kernel #4 already built-in here. Try it. http://forum.xda-developers.com/showthread.php?t=1408952
Hit thanks if I have helped u!! (;
Hi,
I just noticed a problem that I didn't have before on my SGS2. There is a small "jump" when I touch and drag just a little. It's not as smooth as before.
I'm running the last version of Resurrection Remix. I didn't have that bug on stock ROM (Gingerbread), and I can't remember if I had it on stock ICS update, because I didn't like it and updated to the custom ROM right away.
It's really annoying because I lose a lot of precision (for DrawSomething or Swype keyboard... Because of the "jumps", Swype thinks I type 2 words and I always get something like "E Hello" instead of one single word....
I tried to make the best video I could... It's not very clear but you can still see the jumps on the device on the left.
Does someone know how to fix this?
Same problem on stock ICS.
I forgot to mention that the two devices are running the same Resurrection Remix ROM.
I think the stock vitalij value ( i think that's what its called ) is 15. That means you need to move your fingers 16pixels before the move is recognized. Some custom kernels like siyah can adjust that up to zero and you just need to move it atleast 1pixel until the move is recognized.
Sent from my GT-I9100 using xda premium
I was on Siyah before updating to Rerruction Remix, now I'm on a CM kernel.
Can I flash Siyah again without any problem ?
I've just noticed that the ROM v1.8 (that I flashed) comes with CM9 kernel. I'll just update to v1.9 with Siyah
Yay! Updated to v1.9.1 with Siyah kernel and the problem is solved! ^^
remifr said:
Yay! Updated to v1.9.1 with Siyah kernel and the problem is solved! ^^
Click to expand...
Click to collapse
Congrats dude. Hope i helped and it would mean much if you press the thanks button
Sent from my GT-I9100 using xda premium
hey guys im using CM9 Nightly release, as many of the user know, the nightly version has a problem with the camera. maybe im changing to Beta8 but between Beta8 and Nightly, what is the difference? the camera works?
No the camera doesn't work on any ics rom, we need the drivers.
The nightly is newer than beta8 so stick with that. Check the changelog on the rom thread to see the difference
Sent from my GT-S5830 using my hands
As you have seen, I've compiled CM10 for our x10. We are now working as a Team (CMX10) to help improving this RIM
Main issues:
CamCorder hw
Working
Gallery
Airplane mode (When leaving airplane mode, it asks for sim code. Just click on reject button)
halt and reboot
Bluetooth
GSM/Data
Wifi
Hotspot
Tethering USB
Soft Camcorder
Check out Tof37 post about the camcorder fix
http://forum.xda-developers.com/showpost.php?p=41374865&postcount=1019
Discussion thread
This is development thread, please go to discussion thread, if your question isn't for development
http://forum.xda-developers.com/showthread.php?t=2024438
sources
As always https://github.com/CMX10/android_device_semc_es209ra/tree/jellybean
Binaries
backup add to gdrive https://drive.google.com/folderview?id=0B9yijcf7VwyBTnJyYnB1b0k0ZXc&usp=sharing
Speed will be increased if you use Wuala Client instead of web download. Registration is free.
https://www.wuala.com/CMX10-Releases/CM10/?key=CMX10Team
http://wuala.com/CMX10-Android/
gapps
Thanks
* CMX10 Teammates
* nobodyAtall for his kernel I'm using a lot of his work.
* CM team of course
* Zte Blade fixes
* FreeXperia team for the patches for the display
* Nick Holtus for pointing the patch for the display
* Championswimmer for improving the repo and fixing updater script
Check out website for more info
Versions
Rom v10 and kernel v21
* Soft Camcorder
Rom v9.5 and kernel v21
* Update + fix on windows
Rom v9.4 and Kernel v21
* Check website for more information
Kernel v20
* Check website for more information
Rom v9.3 and kernel v19
* Check website for more information
Rom v8.1 and kernel v18
* Check website for more information
Rom v6
* Check website for more information
Kernel v17
* Check website for more information
Kernel v16
*Check website for more information
Rom v5.1
* Latest CM10 updates
Rom v4
* Latest CM10 updates
* Torch
kernel v14
* Fix recovery blinking
Beta 3 ROM
* Headset fix
* DSP crash fix
* Adreno lib added by default
Alpha 2 ROM
* Fixes sound (headset issue still not corrected)
* Default camera app working with glitches
X10_4.1.X_CMX10_bootmanager_v13.ftf
* Wifi
X10_4.1.X_CMX10_bootmanager_v12-triple.ftf
* Add Voice + Data
Bluetooth is also working
For anyone who would like to try it - just change wallpaper to static (not animated) screen will flicker lot less
Theres no 3fps limitation
Here are some screens (Scritch I hope U don't mind)
And video (of v1):
Boo
You beat me to it....
I had started work on CM10 too. It boots to a green coloured lock screen, and even touching it would hot reboot it.
My semester ends on 7 Dec, and I will have loads of time after that. Let's see if I can contribute something useful to CM10
Sent from my Xperia S using xda app-developers app
Hi scritch007,
I have a suggestion for you, Fera and other devs. Since the ICS release from Fera is very much stable now and I believe next release of Fera Kernel and ICS (which will be included all your patches etc) will fix the problem reported by ppl so far. The rom is CM9 based rom is in stable state now thus you can focus on CM10 which is nascent while CM9 on which Fera is already working there must be a final release for CM9 and complete focus of all testers/devs/themers on CM10.
What you would say fellows?
Thanks
OK on another note
If you keep only the es209ra device tree on your laptop and keep it updated, I can run you the builds on my server. I have a full set of cm10 and cm9 sources there.
We can figure this stuff out once my semester exams ending.
Since my X10 is not daily, I am looking to help with it. ...
Changing LOG to ALOG itself was headache enough and then the gralloc was crashing on my face....
It's really amazing to see how far this one boots and works.
Sent from my Xperia S using xda app-developers app
faisalusuf said:
Hi scritch007,
I have a suggestion for you, Fera and other devs. Since the ICS release from Fera is very much stable now and I believe next release of Fera Kernel and ICS (which will be included all your patches etc) will fix the problem reported by ppl so far. The rom is CM9 based rom is in stable state now thus you can focus on CM10 which is nascent while CM9 on which Fera is already working there must be a final release for CM9 and complete focus of all testers/devs/themers on CM10.
What you would say fellows?
Thanks
Click to expand...
Click to collapse
I don't totally agree in here with you. Fera made an amazing ROM, but it is ported from other devices libraries. I'd like to have a CM9 built that is fully working. On CM9 there is also stuff that don't work (properly). Wifi tethering for instance. Video recording/decoding
I tested your latest build its much stable than the cm10 build which tomgus and I had i can see that many minor bugs which were present in FXP cm9 are fixed. Good luck
Edit:- One thing have you ported any overlay parts from KTG or 3.0 kernel .
wow 4.1, this is like christmas gift :good:
I'm going to test, I have seen that
EDIT: i had replace kernel.sin from rom to tft kernel, then i can get to cwm
scritch007 said:
I don't totally agree in here with you. Fera made an amazing ROM, but it is ported from other devices libraries. I'd like to have a CM9 built that is fully working. On CM9 there is also stuff that don't work (properly). Wifi tethering for instance. Video recording/decoding
Click to expand...
Click to collapse
I feel what Faisal meant to say is that let's get the CM10 party started full-on.
Am sure it's hard to let something that's so close and so long that you have been involved with. It would be very community thing where Fera is already onto something and Scritch onto something better for the entire community. Pardon me if i 've been pushy. You guys got me X10 loving! Otherwise i was happy with my HD2.
Sent from my X10 using xda app-developers app
faisalusuf said:
Hi scritch007,
I have a suggestion for you, Fera and other devs. Since the ICS release from Fera is very much stable now and I believe next release of Fera Kernel and ICS (which will be included all your patches etc) will fix the problem reported by ppl so far. The rom is CM9 based rom is in stable state now thus you can focus on CM10 which is nascent while CM9 on which Fera is already working there must be a final release for CM9 and complete focus of all testers/devs/themers on CM10.
What you would say fellows?
Thanks
Click to expand...
Click to collapse
Everyone always wants what newer and shinier, but cm9 still need some work. right now it's really good but im sure he knows it can be better thats why he continue working. And remember the devs are people just like you and I with offline lives and as you probably know that this kinda thing takes lots of time and especially since the cat was let out of the bag early people would want work to start on it and want it finished over night. hype aside, all we can do is wait and contribute in anyway we can.
In my opinion the devs must continue to develop CM9.
We should have a full working CM9 before going to CM10.
That way you talk, about leave CM9 and go on to CM10 will leave us without any completed stuff to use.
Next will be CM10.1 (Android 4.2) and then others, and if we always want the newest one we will end without anyone of those working like they should.
@Scritch, juz wondering, do you need logs for this?
If so, just checking, i can do adb just by connecting my phone to the com and booting it while running
adb logcat -v long > log.txt
Click to expand...
Click to collapse
right?
thanks in advance.
tryantar said:
@Scritch, juz wondering, do you need logs for this?
If so, just checking, i can do adb just by connecting my phone to the com and booting it while running
right?
thanks in advance.
Click to expand...
Click to collapse
For the moment I'm still looking why the display is doing such strange things. No need for logcat, but your command is correct. You don't even need the -v long
i am in
flashing it and ten will see what i can do.
i know wifi needs some tamdisk editing to get it working.
data needs some more work.
is tripple buffer enabled in the kernel?
nickholtus said:
i am in
flashing it and ten will see what i can do.
i know wifi needs some tamdisk editing to get it working.
data needs some more work.
is tripple buffer enabled in the kernel?
Click to expand...
Click to collapse
No, I haven't port this part yet.
Thread Cleaned​
Please people, no more "thanks" posts, we have a thanks button so this is not needed. Also think before you post, this is a development section.​
lol, the screen is mad
In case anyone is interested I tried every fix I could find in xda for reducing CM10 display flickering issue like disable/enable ing force gpu rendering, disable/enable ing hw overlay, changing minimum & maximum cpu frequency but none worked, they made a difference and changed the flickering pace & pattern but didn't solve it
Thanks a lot for you great work & contributions scritch007, truly a fan of your amazing work
btw is it me or this really seems smooth, a lot smoother than our current ics roms?
oh by the way. bug report.
is it only me or the menu's are not scrollable? i can't seem go get it to scroll even the home screen.
and the app drawer is basically blank screen so can only access the apps on the main screen only...
Sent from my Xperia X10 using xda app-developers app
tryantar said:
oh by the way. bug report.
is it only me or the menu's are not scrollable? i can't seem go get it to scroll even the home screen.
and the app drawer is basically blank screen so can only access the apps on the main screen only...
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
I'ts only You home screen is scrollable and app drawer too. And guess its to early to report bugs. Let devs work on it.
Sent from my Nexus 7 using xda app-developers app
Hi,
I tried using the subject ROM with Achotjan's Kernel for CM 7.2.
Everything is normal, except the resolution. I dont know how to put it but the image doesnt cover up the entire screen. Its as is everything has been bundled up leaving a part of the screen unavailable for placing icons or anything.
Has anyone faced any issues with this configuration I am using?
I wish I could provide a screen to show what the issue is. Pls tell me if you need more explanation.
flash the ROM again, wipe all data. if this doesnt solve the issue, try another kernel
Sent from my ADR6425LVW using xda premium
While the mm team's cm7.2 rom is a good functional rom it still has the video recording glitch as all gb fxp based roms have however zdizhu cm 7 is fully functional
http://forum.xda-developers.com/showthread.php?t=1213843
It runs flawlessly without the issues of fxp based roms
Sent from my Google Nexus S