Related
help me please my device is dead how can i backup it agian
if any one know help me the story is when i do a hard rest and make an upgare the imate tyoe in the screen that is erasing rom and the is shut down and now when i repack to update is give me this screen shot what i do
Try pressing "Power Button" + "Reset Button" + Directional Pad (the center) Button" then you will go to boot screen.. If you see "Serial" on top and "v1.06" below try docking the device on the cradle then reflash.. reply asap with the result..
i try this but no answer
what can i do please
alloooooooooooooooooo i want any answer plz
Here... Put this file "HimaClearJumpCode.exe " in the same directory as the ROM and installer and it should work this time...
Also, try to use the power supply connected to the cradle, sometimes the power provided through the USB cradle is not enough.
If it works, chances are you will get another error "Country Error". If that's the case, use the attached file "himaupgradeut_197.exe" instead, this will skip the country check.
Good Luck!
Rayan
my friend it dose not work what can i do please i want to repaire it and i can't do that and how does it work please insert some picture about the steps to understand that
and thank you again about your steps
Please describe what you see on the PDA screen when you power up?
Does it boots all the way into the Windows Mobile Today screen?
Do you only see the word "Serial" on a blank screen?
Please provide more details.
the details is
1- when i put the pda in the cradel it is give me the red light but this happen without put the battery in the pda the problem is when i put the battery in the pda it give me no light
2- i changed the battery but no answer
3- i try to put it in the cradel and recharge for 1 night and put it in the pda but now answer
4- i read abut reflashing but this is very hard and i can't see any replay abut that
5- now i want to tell you the summry when i put the pda with the battery and it full cahrge it give me now answer and the active syn did not find any thing and on the screen there is nothing not serial and not usb ver the screen is black
please tell me i'm in egypte and no one know to repaire it
what can i do
Sorry, but as far as I know, you will not be able to reflash if you can't boot or at least see the bootloader screen (blank screen with SERIAL text).
May I ask, what caused this problem in the first place?
What model do you have? Himalaya, Alpine, Wallaby, etc...
i have himalaya 1.2
is this write or not
where are you
do you know waht i must to do my friend
where are you
no one know
Can you tell me what will you see if in your screen if you press the "Power Button" + "reset Button" + Directional Pad Button (The center one)? cuz thats the best you ca do...
my friend when i connected the power my device is not work how?! because when i put the battery in the device it gives me that no power in the device ,then i changed the battery but the problem still appear when i put the device in the cradel the red light becomes work but this happend when i put it without battery now when i put the battery the device turn off the red light and not give me any thing now i want to give the device power
how can i do that and how can i fix the screen that tell me that the device is not in the cradel this screen is apper for me my frindes
and when i press that buttons nothig happen i don't know waht but now i want to give the device the power how can i do that do you have any answer about that
Hi guys, i am facing exact same thing which dannytgt faced (http://forum.xda-developers.com/showpost.php?p=6707785&postcount=1 )...but[/url] with no luck what so ever.....was running a stock rom in my hd2 3.14....wanted to try wp7 and did a task29....after that...hd2 doesnt go into bootloader screen....tried all possible combinations with/without sd,sim, holding vol down, vol up, both with power tapped...power holded etc etc...hd2 always goes into stick together screen and doesnt progress as there is os to load....opened up the mobile and tried with a pin to push the vol down switch directly also....all hardware keys were working gr8 (including vol down and up and power keys) whn win 6.5/android was running.
i know for the fact that this is reversable....if only my hd2 can get to bootloader...i will hv os running in a jiffy....
any ideas ppl? my hd2 is 3 months old ...no warrenty cos i bought it in US and using it in india...
gdsbalaji said:
Hi guys, i am facing exact same thing which dannytgt faced (http://forum.xda-developers.com/show...count=1)...but with no luck what so ever.....was running a stock rom in my hd2 3.14....wanted to try wp7 and did a task29....after that...hd2 doesnt go into bootloader screen....tried all possible combinations with/without sd,sim, holding vol down, vol up, both with power tapped...power holded etc etc...hd2 always goes into stick together screen and doesnt progress as there is os to load....opened up the mobile and tried with a pin to push the vol down switch directly also....all hardware keys were working gr8 (including vol down and up and power keys) whn win 6.5/android was running.
i know for the fact that this is reversable....if only my hd2 can get to bootloader...i will hv os running in a jiffy....
any ideas ppl? my hd2 is 3 months old ...no warrenty cos i bought it in US and using it in india...
Click to expand...
Click to collapse
Wow, did you search? There is a thread right below yours with 13 comments for the same problem.
i did search for 2 days and tried the suggesting provided by the users...but nothing seem to work....i just need to get to the bootloader so that i can load a rom and move on to wp7....after task29...somehow hd2 never goes into bootloader screen...tried many times hoping for luck...still trying...
bootloader dont load
some more details...tried to task29 (doloop) with 100% success and then my tmo hd2 wont go into bootscreen what ever i do...its stuck for ever in "stick together"...i know there is no os to load...but i dont understand y cant my hd2 go intobootloader
so far i tried
with holding volume down and power key with a single tap
with holding volume down and holding power key
with holding volume down, volume up and power key with a single tap
with holding volume down and reset button
with/without sim
with/without SD
with/without plug in wall charger
with/without plug to pc via usb cable
observations...when i pull out the battery and put it back in and then connect to computer when the phone is still off....the charging indicator LED glows in orange.
when in this mode if i switch the phone on with power/end key....it doent start...i have to pull the usb out, the orange LED still glows...and if i tap the power/end key nothing happenes...i have to pullout the battery to get it to start and eventually get stuck in "stick together"..
would really appriciate if any1 can help me get my hd2 into bootloader screen...
resolved the problem myself.....hd2 is working like a charm....thanks for all your support.
gdsbalaji said:
resolved the problem myself.....hd2 is working like a charm....thanks for all your support.
Click to expand...
Click to collapse
hey. how did you fix it?
mine is totally dead after flashing a non compatible rom, but i can revive it if I can go to bootloader
hanniabdin said:
hey. how did you fix it?
mine is totally dead after flashing a non compatible rom, but i can revive it if I can go to bootloader
Click to expand...
Click to collapse
With some more information, it was easily'r to help you.
Witch HD2 device do you have?
Witch stock ROM did you install?
Can you get access to bootloader?
SOLVED {bootloader dont load}
posted my the solution to my problem here.
http://forum.xda-developers.com/showpost.php?p=10644926&postcount=4
check it out...
________________________
thank me if this is useful.
kurt-willems said:
With some more information, it was easily'r to help you.
Witch HD2 device do you have?
Witch stock ROM did you install?
Can you get access to bootloader?
Click to expand...
Click to collapse
mine is t mobile hd2
I installed rom 2.01
I cann't got to bootloader and I can't eveing sync it with the windows. the windows just give sound but no sync. even the charging light will not turn on.
So whenever i let a new ROM settle, the volume down button appears to malfunction and not work...i reboot and even turn the volume on and off in the settings but the volume down rocker doesn't work at all. Any insight on to why this happens?
i've got the same problem, but i don't know how to solve it -.-
any help guys...is it just a hardware issue? i already reflashed 2.1 firmware
I now updated to 2.3.3 stock rom (rooted with xrecovery and fps uncap) and the volume down button still doesnt work
I would also like to know (or be sure) if the button itself doesnt work (hardware problem) or if its something about a software issue, as i updated my phone and it still doesnt work i think its a hardware problem, but i dont know...
hey guys , i have a problem with my i9300 when
i lock screen screen turns off and device locks but when i press power button somtimes the screen won't turn on!
and the home button doesn't work too!
if i leave the device it will reboot automaticly but it won't boot & just shows samsung boot animation!(it will soft reboot)
i should hold the power button till the device restarts and it will boot currectly but after three or four seconds the device jams again!!!!!
i should do this work for two or tree times to make the device is workable
but it will jam after a time!and i should do this prosess again!
do you have any suggestion that may solve my problem?
(kernel:arter-97 4.0.3 android 4.3 Official UAE recovery:TWRP)
(sorry if i had grammeral mistakes !my mothertongue is not english!)
Go back to totally stock firmware after a full wipe. If still the same then probably your nand memory is worn out.
Hi guys i have a big problem with my device vdf su6 ..I change rom and i put the gipsy rom from modaco my phone is open i change languange and when i try to put code from wi-fi keybord is not response at all.,and i can not go all the settings..I try to change rom with volume up- power buttons and i have not access to twrp ,and volume down-power buttons it show me only the (FTM)..in a few words i have not longer any more recovery...What can i do? please i try almost everything.... I am disappointed.. Sorry for my bad english.. please any help?