Hi guys,
I've been handed a Lumia 800 by my dad and said "Fix it" for the third time in a week. Random freezes, BSoD and now what seems to be a Bootloop? I've tried charging with the original cable which works for about 20 seconds when the battery bar disapears and comes back on. So I swapped to my Girlfriends Galaxy ACE charger the same happened. I grabbed my original Xperia PLAY charger which is thicker than both and it works but i've had to put a rubber band to hold it at an angle.. I've checked the system using linux using;
Code:
tail -f /var/log/messages
sudo mount -t vfat /dev/sdb2 /media/usbdrive/
it IS there. but cant get any access using Windows nor to get the phone to boot. If there is a way to get a recovery system (like my R800i's CWMrecovery or my girlfriends ACE or my Nexus's recovery. YAH we like android.. I had a HTC before the 2x Plays I own. and the nexus xD) or some way of flashing the the new firmware/update without losing stuff that'd be great. all other help would be too!
If you flash it, the data will go in the bin, I'm afraid.
Yahh I guessed, Alas I ended up doing a force-wipe from terminal and using a backed up firmware 1600.2487.8107.12070 I found from a friends linux lumia updater
sorted anyhow
Related
Hi, I'm trying to help a fellow Atrix user after he formatted and partitioned the internal flash memory using Tenfar's CMW Recovery.
He has lost touch on the bottom part of his screen; about a 1/2" of screen space doesn't work.
Tenfar posted that he had done this too, and had resolved this by reformatting with the Stock Recovery. Another user asked in that same thread how he accomplished that, but no answer has been given yet.
This user cannot get the Recovery Menu to show up because of the lower touch screen not working.
Can the steps be run blindly without the Recovery Menu showing up?
Or, can someone help me on how to have him format the internal memory via ADB?
I've had him try the following ADB commands from both the /!\ Recovery Screen and after enabling Early USB Enumeration without luck.
Code:
adb shell
$ su
# format DATA:
Comes back with format: not found.
Can anyone help? I've seen a few others with this issue but have yet to see a full solution posted for those that aren't ADB experts.
I have this problem too! Tenfar was kind enough to try helping me but apparently I'm a retard and unfortunately can't follow his instructions. I've been spending an entire week reading hours each day and I'm embarrassed that I still can't fix it, despite him sending me almost a dozen PM's trying to do so. Very grateful but sad that I'm so dumb.
He's told me to do this:
$adb shell
$su
#busybox umount /sdcard (hit enter key)
#newfs_msdos -F 32 -S 512 -L MB860 -c 64 -u 16 /dev/block/mmcblk0p18 (hit enter key)
I'm not sure where to do this. I now think I do this while the device is in Early USB Numeration but I haven't tried it yet. The wife was getting really pissed because I spent the entire weekend trying to fix this and have been investing too much time on the computer. She's... having mad PMS so I'm leaving it for a few days lol
I tried earlier when the phone was booted up but after some research, believe it may need to be done in Early USB Numeration mode but there's only about a minute before it automatically reboots. I haven't tried this and hope that my assumption is correct. I know about 3 other people who are currently experiencing this challenge and I hope that it corrects it.
The wife is working a double shift today so I'll try after work. Can't blame her for getting upset with me. Soft bricked a few other phones but fixed them with relative ease. This has been by far the toughest. It was my birthday last week and I spent most of my day on the computer trying to fix my Atrix lol
After this, no more formatting internal SD partitions!!! Paypal is giving me grief but I plan on giving Tenfar a modest donation. He's been very supportive of my dumb ass lol
In this forum there is a very good guide on how to use adb. Can't remember where exactly it's at I just did a general search for How to use adb it may help you.
Edit I think this is the link androidsamurai.com/forum/viewforum.php?f=12
coldfusionb said:
In this forum there is a very good guide on how to use adb. Can't remember where exactly it's at I just did a general search for How to use adb it may help you.
Edit I think this is the link androidsamurai.com/forum/viewforum.php?f=12
Click to expand...
Click to collapse
Thank you!
I managed to install Ubuntu and I really like that.. tried from there too and it wasn't working. So I think it's definitely a problem with my dumb ass. If and when I get it working (I'm determined!...... and sort of stuck lol) then I'll post a guide.
Fuuuuuuuuuuck!!! Still not working!!
Yeah.. i ended up wiping with stock recovery and still a no go. Still no lower half of the screen or buttons. Sucks big time
Once ADB can be run in the recovery menu I think it should be fine.
Tenfar said he's fixed this problem but I'm no sure where he's run these commands. I feel bad after sending him a ton of PMs so I'm just waiting until he updates his Recovery app.
You could try restoring your sbf in rsd
Sent from my MB860 using XDA App
sgtmedeiros said:
You could try restoring your sbf in rsd
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
That's been mentioned and tried multiple times.
I have a simple script written with the command lines from Tenfar, but I am getting his input via PM to make sure it's correct and when exactly to run it. Hopefully he'll be able to direct me on how to get it done. Unfortunately, even if he says it looks right it's going to be completely untested. :-/
Sent via rooted Moto Atrix using Tapatalk
das8nt said:
I have a simple script written with the command lines from Tenfar, but I am getting his input via PM to make sure it's correct and when exactly to run it. Hopefully he'll be able to direct me on how to get it done. Unfortunately, even if he says it looks right it's going to be completely untested. :-/
Sent via rooted Moto Atrix using Tapatalk
Click to expand...
Click to collapse
There's still a glimmer of hope, buddy. Once we get ADB access in Recovery I think all should be well.. unless partitioning this block somehow corrupts and kills the digitizer or something.
I actually couldn't wait any longer. Ported to Bell and got a new Atrix so if things go bad I'll have an easier time swapping. When I fix this AT&T one I'll sell it to pay off my cancellation fee with Rogers. Or, if I end up sending it to Motorola I can go back with my buyer's remorse period and go back to Rogers.
Hope you've got a backup phone or something to use in the meanwhile, man. This issue drove me INSANE!!
Hope is good, but this isn't necessarily for me. That's why I can't test it; this didn't happen to my phone. I have just been trying to help those who this did happen to. I'm also sure it will continue to happen if the CWM port for our phones isn't preset to format correctly.
Glad you were able to get a working phone again, but too bad a phone had to go back under these conditions.
Well, I'll keep trying to figure it out; waiting on another reply from Tenfar. Our schedules don't mesh too well, so if there's anyone else that might have experience in formating via ADB any help would be appreciated. Thanks!
Sent via rooted Moto Atrix using Tapatalk
I have the same problem, I just wanna know if anyone found a solution to fix that?
Also, I live in Belgium (Europe), I bought the atrix in usa a month ago during my honey moon. Motorola Europe doesn't support yet the atrix, I don't know what to do!
The phone is not usable anymore, like someone said: "clicking on the soft button area registers as a click on the bottom of the screen". So, the back button don't work anymore (you have to reboot when your stuck in a menu!)
hi guys i'm currently with a reflashed stock 1.83 rom, i can use android recovery (there the bottom screen portion works) and i can run wipe data/cache.
but no matter how many times i tried when the phone finally boots up it starts with motoblur setup and i cannot pass it, all the buttons work like the bottom of the visible screen and i cannot raise up the keyboard to turn the setup off...
i read in the sbf thread that would be possible to flash or not some particular areas, so if the problems is the wrong partitioning of the /dev/block/mmcblk0p18
maybe some of them could create a sbf replacement toreflash only that partition
other side i was talking with bongd and he says he had problem with the psd.bin file that is in the mmcblk0p03...
so what is the current status of this? adb seems not to work even in early enumeration usb mode...
what if we execute the script using the update.zip function?
i can access my sdcard from windows in storage mode
if we put the script in one signed update.zip into the sd the phone should be able to execute itself?
KeRmiT80 said:
hi guys i'm currently with a reflashed stock 1.83 rom, i can use android recovery (there the bottom screen portion works) and i can run wipe data/cache.
but no matter how many times i tried when the phone finally boots up it starts with motoblur setup and i cannot pass it, all the buttons work like the bottom of the visible screen and i cannot raise up the keyboard to turn the setup off...
i read in the sbf thread that would be possible to flash or not some particular areas, so if the problems is the wrong partitioning of the /dev/block/mmcblk0p18
maybe some of them could create a sbf replacement toreflash only that partition
other side i was talking with bongd and he says he had problem with the psd.bin file that is in the mmcblk0p03...
so what is the current status of this? adb seems not to work even in early enumeration usb mode...
Click to expand...
Click to collapse
Tenfar told me it was mmcblk0p18 but it's actually mmcblk0p03 which needs to be corrected.
There's no ADB in recovery right now. Tenfar's apparently got it working but hasn't released it yet.
I also guarantee you can bypass the Motoblur setup as well. Hit these keys:
?123
ALT
ABC
e
?123
ALT
ABC
e
b
l
u
r
o
f
f
I'm positive because I've literally flashed every SBF and I've spent a lot of time troubleshooting this issue.
really i cannot open the keyboard while i'm in the blursetup screen, i keep pressing the menu button but it highlights only the emergency call and after many seconds it chance to emergency call screen...
At this time, your phone is 'bricked' since we can't get ADB access.
Sent from my MB860 using XDA Premium App
we don't have adb access but i tried and we can use the update function in the stock recovery...i tried to put a update.zip of my old milestone and the process worked till the sign verification that failed.
in the milestone that update.zip is used to run the updaterscript that launches the openrecovery by skrilax_cz, that works like the recovery of tenfar
i guess that if we have a correct update.zip for atrix and we put in it the script we need, it should be run.
unfortunately i don't have the knowledge to build the correct script and don't have access to a signed update.zip for atrix.
if we only could gain some interest of the devs i think our problem could be solved in short time...
edit: i sent 2 pm to tenfar but did not reply, maybe someone has more luck...
I have asked about this before, but now I'm here to inform. If you have the problem of not being able to flash roms, and it says something like
''Installing: SDCARD:update.zip
Finding update package...
E:Can't mount /dev/block/mmcblk1p1
(No such file or directory)
E:Can't mount SDCARD:update.zip
Installation aborted.'
There is a semi-simple fix. This issue is happening because for whatever reason, a certain directory in your internal sd card can not be read. It can happen for 2 reasons. 1. Your inner sd card reader is fried (but if that was the case, chances are you can't boot your phone either) or more likely
2. Your innersd card needs to be reformatted. If I had to come up with a reason, it would have to be that somehow, when your innersd card was formatted, it never created that directory. I'm not sure on the reason for that happening. Anyway, the solution is simple (though part of it is a pain in the butt). Again, you have 2 choices.
1. Take your phone COMPLETELY apart, to be able to get to your inner sd, so you can format or replace it. Or the much easier, though still a pain in the butt option of
2. Cutting off the plastic above your innersd. This can be easy, but chances are, it won't be pretty. Mine wasn't. Some have been able to make it a pretty clean cut, but I wasn't able to. The reason I say this is easier is because it's a lot easier to mess up a phone, if you take it apart. You have to worry about esd (Electro Static Discharge), worry about smudging the screen (though, if memory serves me right, the screen to this phone is actually stuck to the gorilla glass), as well as you have to worry about every single little piece in the phone... Another reason cutting off the plastic piece would be a better solution is you don't have to do it everytime you need to get to your innersd. It's a once and done deal. Anyway, on to what I did to fix this issue.
I first started having this error, when trying to go from 1.9 to 1.9.1. I gave up on it for a while, until I saw that GingerStreak came out. I was really excited. I wanted to get Gingerbread on my phone! It's faster. It drains less battery... I wanted it. With hours of help from lordmorphous, we determined the problem, and he told me to cut the plastic above it, and replace the innersd. I did so, and VOILA! It worked! I was ecstatic to have Gingerstreak on my phone! It is faster, and more battery efficient (I could put the cpu down to 384 with almost no lag). But it restarts itself... At first, it was a couple times a day. That I could live with... But it got to the point where it happened every half hour, to every 2 hours. Everytime it reset, it would turn off my alarm. I wouldn't wake up on time, when I needed to. And it was just a big pain in the ass! Also, sometimes it would even get stuck on the Dell logo, DRAINING battery like crazy! So, I looked it up, and found out that that was simply a glitch in Gingerstreak, and that DSC didn't have that glitch, HUZZAH! So, I put the zip file for DSC 0.72 on my phone, and try to flash... But I got that error again... The way I fixed it this time, I just switched the internal and external sd cards. Worked just fine. And you just switch the cards back, when you're done. Sorry for this big story, but my fingers wouldn't stop typing. :3
PS. You might have to format both, after switching. Just format the internal via Streakmod, and the external via phone settings.
Dell streak won't start
Hi
I tried to run the following command in fastboot mode after flashing to 407 ROM
fastboot -w reboot
wishing to clear all the cache data and my phone won't start. Doesn't show any thing on the screen. Is there anything i can do to start my phone??
All these happened while i was trying to root my DS.
Thanks in advance
If you did a "fastboot -w", you have a brick... a virtually unrecoverable brick
http://forum.xda-developers.com/showthread.php?t=1500290
http://forum.xda-developers.com/wiki/Dell_Streak_5/Flashing_Guide
WARNING ABOUT FASTBOOT: Do not attempt to use fastboot erase or fastboot -w on the Streak
The fastboot program on the streak has issues and attempting to erase partitions with it may result in it hanging.
If it hangs the Streak will not be able to start up and is likely not rescuable by any manner (including QDL Tool)
Use factory reset via recovery mode instead.
Click to expand...
Click to collapse
Thanks
Hi Radimus thank you so much.
I appreciate the time you spent to help and give your advices and expertise to all the newbies like me.
Well i think i bricked my DS and can't even repair it since there is no Dell's service center in my country(Nepal). Since it is still has warranty I was thinking to send it back to UK (where i bought it) last year but since i had changed from custom ROM i don't think the warranty still valid.
So I think I'm gonna have to give it up, but I'm gonna get the same again.......
best phone ever...
Carrire locked
hi everyone,
since i bricked my DS (apparently) i gave it to a local repair center run by a friend of mine. He was able to give it a new life , but the only problem is that it is now locked!!! Since my DS was a factory unlocked i didn't have a unlock code or anything like that to unlock it and i don't think the guys from dell would give any random code to unlock it now. so is there any way out of it???
Bear with me as I painfully type this out on my evo...
Earlier today, I tried to flash the new miui rom. It wouldnt go past the moto screen.
I try mounting each partition by hand, when I get a cannot mount error.
I try again and it mounts fine.
Try again.. and it fails.
The logs show it as unknown and sometimes as ext3 partition.
This all started from flashing cwm touch( which never showed up, it's the same cwm as before) via CWM(apk) as an attempt to get the amora installer working right.
i figure i need to fastboot and flash jokers custom cwm again. if that doesnt work, ill just get a replacememt until GS3.
Sent from my PC36100 using XDA
Update/Bump:
I'm trying to re-flash CMW, however...
When starting Fastboot protocol, it tells me that my battery is too low.
This would be all fine and dandy, but I'm unable to charge my phone.
Plugging it into an AC socket results in it being on the Moto screeen for hours (tested and proven). No battery screen comes up / battery is not charged.
Plugging it into a USB port starts the same thing.
going into CWM doesn't do anything either for the battery.
I don't have a spare battery either
I think I'm pretty screwed here.
My EVO won't charge with the case on, and the HTC Arrive was just a horrible phone in general lol...
Anything you can think of to try and get this fixed until I get my replacement or the Galaxy Nexus next week?
Ok, so I wanted Ice Cream Sandwich on my Samsung Galaxy S Vibrant SGH-T959.
I found a Youtube video and eventually installed the passion ICS rom on my phone successfully. Then, I inserted my external sd card and took it back out with out unmounting it. This made my phone want to wipe all my (internal) sdcard data. So stupidly, I did. Luckily I have a recent backup. But then I did a reboot, and it said that the encryption failed and I needed to reset my phone. I complied. Then it would only go into the mod recovery screen, since I had no rom to reinstall (my sdcard wouldn't mount for some odd reason, even after I tried repeatedly). So I decided to start over. I used odin to revert it to what it came like. I unplugged it because it got stuck at cache.rfs and soft-bricked it. Luckily I know how to fix this so I got it back into odin, and I got it to work until it would have a blue reset box in the top left corner, and it said I removed my device. My phone then tried to reboot. It showed the vibrant screen, then crashed and showed the little swirl thing that it does before it shows the green charging battery, it would show that, then show that with the battery in the background, then crash and start again, never getting to the green battery. I tried unplugging it and booting it that way... it went to the vibrant screen and crashed yet again. Also can't get it to display the pink animation. I tried the odin thing again just to get the same result. I tried to boot into recovery mode and it won't even do that. It wont show the terminal thing to save its life. Any ideas? I can get it to the download screen. Any hope? (sorry for the in-depth story, but I thought it might help someone pinpoint what was wrong) I am sporting windows xp. Losing data isn't a problem for either my internal sdcard or external sdcard seeing as I have complete backups on my computer.
Thanks!
Help Please!
UPDATED!
I just tried again and it showed the terminal thing for the first time since I used odin. It will now show the green battery screen, it went into terminal and looked like it was doing stuff and it said that the data wipe failed. Boot Pattern still the same, goes to the vibrant screen and then crashes.
UPDATED YET AGAIN!
It will now go into recovery.
AND AGAIN
Now after I wiped it etc. in recovery mode and rebooted and now it just shows the vibrant screen and crashes over and over on its own.
here's a work around fix
http://forum.xda-developers.com/showthread.php?t=1580902&highlight=encryption
Not-Working Links, noncompaitibility with windows xp it doesn't restore to 2.1
So I tried that a bit ago and the pit file link to download doesn't work. So I used the default one for the vibrant. Didn't successfully run 2.1. Still same problem. Oh, and also, the whole command prompt open in that folder doesn't work on xp, only windows 7 or vista, I found a fix, but still it doesn't recognize adb as a command that is acceptable or whatever.
Thanks, but any other help?
I try Odin and when my phone shows data formatting..... it says data wipe failed afterwards. I think this is the problem.
blu422 said:
So I tried that a bit ago and the pit file link to download doesn't work. So I used the default one for the vibrant. Didn't successfully run 2.1. Still same problem. Oh, and also, the whole command prompt open in that folder doesn't work on xp, only windows 7 or vista, I found a fix, but still it doesn't recognize adb as a command that is acceptable or whatever.
Thanks, but any other help?
I try Odin and when my phone shows data formatting..... it says data wipe failed afterwards. I think this is the problem.
Click to expand...
Click to collapse
Looking back... I didn't know what adb was and now that I have the android SDK installed I'm sure I would be able to fix. Too bad I sold it for an insanely low price. Ugh.
Galaxy S3 T999 rooted and flashed more than daily.
I installed Chainfire3D (after hearing good things about it) and then realized the problems it causes, so i deleted the app and then its CF3D drivers from system/lib which didnt work properly anyways. Upon restart device doesnt boot anymore :crying: (welI maybe its on cause the battery generates heat, but its black screen) I also couldnt get titanium backup to work in the past just in case something like this happens cause it was constantly stuck on yahoo finance when backing up.
My main issue is I had alot of things (worth a couple days) installed on my phone, and dont want to lose all of it. Bad thing i didnt realize there is Nanadroid backup (cause its my first android phone) which works unlike titanium quickly and efficiently, but backing things up now after black screen is pointless no? i can acess CWM recovery, but dont want to factory reset yet.
So any way to inject those stupid CF3D drivers via ADB? Or maybe backup everything but that certain system/lib folder?
Edit: i ran into this:
On CF-Root just boot into recovery, ADB shell to it, and type "rootsh" (instead of "su") to have root shell access... if anything goes wrong, just "mount /system" and "/system/lib/cf3d_uninstall.sh" to remove the CF3D driver and restore the old one. Not very likely it will happen, but a good fallback option in case of issues (no need to reflash firmware or restore backup)
Click to expand...
Click to collapse
, unfortunately cf3d_uninstall.sh was one of the files i deleted, but maybe if someone who has Chainfire3D installed on S3 LTE can share that file, i can then inject it and restore the old drivers?
Seems mine suffered a similar fate.
a friend suggested SPB 3D loaded it. It sucked and caused lock-ups and delays. I uninstalled and the phone seemed to be fine after.
I plugged the phone in to charge overnight and about an hour later when going to bed the screen was stuck on the boot-up screen.
has not gone past this since.
Wanted to get the firmware restored and after trying to find a suitable stock one I took it to my SP for repair they tried to flash it but it fails every time, they said the motherboard is toast.
It will boot to flash mode so it can be uploaded but it doesn't work. Odin says no partitions.
Tried Heimdall it detects the phone but it tells me the image is corrupt and I also have no idea how to repair the partition that seems to be lost.
white 16GB Tmoble GS3
Actually my current issue is similar, it boots up says galaxy S3 then black screen. I can connect to odin, i can boot into clockwork, and i can flash roms, ODIN says everything is successful after i flash but when it boots it still goes to a black screen. this happened after i flashed a rom(that worked) and flashing a kernel that also previously worked....after that its been stuck....i can flash whatever with success but i cannot seem to get it past that Galaxy S3 screen....
I flashed the new FreeGS3 rom, and the TGST STOCK ICS Alpha37 kernel i cleared caches and wiped davliks not too sure where to go from here.....Do i need factory tmoble GS3 PIT file?
Redsalamander said:
Seems mine suffered a similar fate.
a friend suggested SPB 3D loaded it. It sucked and caused lock-ups and delays. I uninstalled and the phone seemed to be fine after.
I plugged the phone in to charge overnight and about an hour later when going to bed the screen was stuck on the boot-up screen.
has not gone past this since.
Wanted to get the firmware restored and after trying to find a suitable stock one I took it to my SP for repair they tried to flash it but it fails every time, they said the motherboard is toast.
It will boot to flash mode so it can be uploaded but it doesn't work. Odin says no partitions.
Tried Heimdall it detects the phone but it tells me the image is corrupt and I also have no idea how to repair the partition that seems to be lost.
Click to expand...
Click to collapse
Not to offend anyone the Dev app said he wasn't going to support it for the galaxy s3
Sent from my SCH-I535 using xda premium
Turns out mine was a faulty mainboard after dragging their feet to repair it including a delay due to them wanting to verify warantee with proof of purchase samsung finaly agreed to swap it out for a new one.
Redsalamander said:
Turns out mine was a faulty mainboard after dragging their feet to repair it including a delay due to them wanting to verify warantee with proof of purchase samsung finaly agreed to swap it out for a new one.
Click to expand...
Click to collapse
Well thing is on my end...i didn't flash whatever the OP had flashed. What i DID do though is flash a rom and a kernel on the same cwm event. when it rebooted...it just does this....
i have a backup file....its on my laptop though....with only using odin or cwm how can i push that file onto my phone? My CWM doesnt have USB mount else id just do that.....?