First of all, I know that I'm an idiot and I should read the instuctions...
My device:
Xperia X10a from [email protected] flashed to CENT_EUROPE_1 X10i, unlocked via DAVINCI TEAM
Then I tried to UNLOCK my Bootloader and I stucked with no singnal/no SIM inserted problem.
Kernel version:
2.6.29-00054-g5f01537 [email protected]#1
So what I want to do now is flash STOCK KERNEL to my Xperia. I allready tried FW/ROM budnles for FlashTool and Wotan, but the kernel version won´t change. Is there a only STOCK KERNEL xRecovery (.zip) pacage for x10?
Thank you in advance.
czskullik said:
First of all, I know that I'm an idiot and I should read the instuctions...
My device:
Xperia X10a from [email protected] flashed to CENT_EUROPE_1 X10i, unlocked via DAVINCI TEAM
Then I tried to UNLOCK my Bootloader and I stucked with no singnal/no SIM inserted problem.
Kernel version:
2.6.29-00054-g5f01537 [email protected]#1
So what I want to do now is flash STOCK KERNEL to my Xperia. I allready tried FW/ROM budnles for FlashTool and Wotan, but the kernel version won´t change. Is there a only STOCK KERNEL xRecovery (.zip) pacage for x10?
Thank you in advance.
Click to expand...
Click to collapse
Search for restore original boot loader thread in dev section. It will sort your problem out
Sent from my X10i using xda premium
Unfortunately, S1 Tool reports: NOTHING TO RESTORE.
Log:
13/11/2011 14:58:18 Welcome to S1 tool.
13/11/2011 14:58:38
13/11/2011 14:58:38 TO CONNECT NEXT PHONES
13/11/2011 14:58:38 X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
13/11/2011 14:58:38 LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
13/11/2011 14:58:38 PRESS AND HOLD "BACK" BUTTON...
13/11/2011 14:58:38
13/11/2011 14:58:38 PLEASE ATTACH TURNED OFF PHONE NOW
13/11/2011 14:58:38
13/11/2011 14:58:45
13/11/2011 14:58:45 RUNNING S1_EROM VER "R8A033"
13/11/2011 14:58:45 SOFTWARE AID: 0001
13/11/2011 14:58:45 LOADER AID: 0001
13/11/2011 14:58:48 FLASH ID: "002C/00B3"
13/11/2011 14:58:48 LOADER VERSION: "R4A024"
13/11/2011 14:58:48
13/11/2011 14:58:48 MODEL (from GDFS): X10i
13/11/2011 14:58:48 SOFTWARE VERSION: 1227-4612_2.1.A.0.435
13/11/2011 14:58:48 CUSTOM VERSION: 1232-9897_R8B
13/11/2011 14:58:48 FILESYSTEM VERSION: WORLD-1-4-8_2.1.A.0.435
13/11/2011 14:58:48 SERIAL NO: CB511NMWZZ
13/11/2011 14:58:48
13/11/2011 14:58:48 NOT RECOGNIZED SIMLOCK CERTIFICATE
13/11/2011 14:58:48 MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
13/11/2011 14:58:48 Elapsed:10 secs.
13/11/2011 14:59:02
13/11/2011 14:59:02 TO CONNECT NEXT PHONES
13/11/2011 14:59:02 X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
13/11/2011 14:59:02 LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
13/11/2011 14:59:02 PRESS AND HOLD "BACK" BUTTON...
13/11/2011 14:59:02
13/11/2011 14:59:02 PLEASE ATTACH TURNED OFF PHONE NOW
13/11/2011 14:59:02
13/11/2011 14:59:24
13/11/2011 14:59:24 RUNNING S1_EROM VER "R8A033"
13/11/2011 14:59:24 SOFTWARE AID: 0001
13/11/2011 14:59:24 LOADER AID: 0001
13/11/2011 14:59:28 FLASH ID: "002C/00B3"
13/11/2011 14:59:28 LOADER VERSION: "R4A024"
13/11/2011 14:59:28
13/11/2011 14:59:28 NOTHING TO RESTORE
13/11/2011 14:59:28 Elapsed:25 secs.
Sorry then, all I can suggest is to try repairing using seus our pccompanion.
You really should have read the instructions first!
Sent from my X10i using xda premium
Both Seus and PC Companion claim that there's no sw available for connected device.
If you do the sim unlock through davinci again it will restore it for you.
I did this exact same thing when I was playing around trying to get unlocked bootloader back after sim unlocking. Alas it failed lol.
But I just unlocked again through davinci and now I am working as normal.
I already tried to do that, but Davinci won't work with my x10 anymore.
(#) DaVinci Service Client v22.81 (User: 384132 / Credits: 0)
New Device Connected On USBF3
Device Identification Started...
The IMEI of the product is:
01249600005404
Model info:
X10i (CB511NMWZZ)
Security info:
Color: Red
AIDs (SW/CUST/EROM/SIMLOCK/LOADER): 0001/0001/0001/0001/0001
EROM info:
S1_EROM R8A033 1226-2253 [20100928 12:04:00]
Software info:
1227-4612_2.1.A.0.435
Customization info:
1232-9897 R8B
Language info:
WORLD-1-4-8_2.1.A.0.435
Identification Time - 00:00:00
Done!
Service Selection Started...
Registering MIDAS.DLL...OK
Error! Error loading MIDAS.DLL
The Device Is Not Supported: X10 / 0001 / Red
Done!
Even when they say there is no update there is an option to repair phone or flash anyway...
Unread you have really screwed it up...
Sent from my X10i using xda premium
try this http://forum.xda-developers.com/showthread.php?p=19264039
i was in your situation but i found some tool that hase restore my bl...i can't remember the name of that tool but it works for me...since then i never try to unlock my bl
gregbradley said:
Even when they say there is no update there is an option to repair phone or flash anyway...
Unread you have really screwed it up...
Sent from my X10i using xda premium
Click to expand...
Click to collapse
When I select Repair it downloads firmware, but after Seus/PC Companion wants me to plug the phone turned off with holding the back key it says: no sw available for connected device and it quit.
dorinrockeru said:
try this http://forum.xda-developers.com/showthread.php?p=19264039
i was in your situation but i found some tool that hase restore my bl...i can't remember the name of that tool but it works for me...since then i never try to unlock my bl
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=19308519&postcount=3
czskullik said:
When I select Repair it downloads firmware, but after Seus/PC Companion wants me to plug the phone turned off with holding the back key it says: no sw available for connected device and it quit.
Click to expand...
Click to collapse
That doesn't sound good.
Try sending a pm to the_laser, he knows most about this
Sent from my X10i using xda premium
I had to jump through a few hoops to get mine going.
I used flashtool to get back to SE stock 2.1 with stock kernel
Then powered it on. Once it was booted and gone through the setup wizard turned it off
Then redid the sim unlock on davinci.
Then I was able to go through root with flashtool to get xrecovery and stuff which got me back to where i started.
PS Going through the power on was required, I tried to do it without that step and davinci wouldn't recognise my handset.
Stu| said:
I had to jump through a few hoops to get mine going.
I used flashtool to get back to SE stock 2.1 with stock kernel
Then powered it on. Once it was booted and gone through the setup wizard turned it off
Then redid the sim unlock on davinci.
Then I was able to go through root with flashtool to get xrecovery and stuff which got me back to where i started.
PS Going through the power on was required, I tried to do it without that step and davinci wouldn't recognise my handset.
Click to expand...
Click to collapse
Could you provide me exact link of SE stock 2.1 with stock kernel you used? Thank you.
czskullik said:
Could you provide me exact link of SE stock 2.1 with stock kernel you used? Thank you.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=928343
2nd post
gregbradley said:
http://forum.xda-developers.com/showthread.php?t=928343
2nd post
Click to expand...
Click to collapse
That's the one!
Thank you for the link. I already flashed my phone with Sony Ericsson X10i_2.1.A.435_GLOBAL-GGL GENERIC, but as I mentioned the Kernel version always stuck on 2.6.29-00054-g5f01537 [email protected]#1 and won't go back to Stock one (even though the flash is always successful).
So, my tough was to flash back X10a firmware to get it back as it comes from [email protected] So, I flashed X10a_2.1.A.0.492_AT&T and BASEBAND 2.1.65 (X10a). As the result the Kernel version is still 2.6.29-00054-g5f01537 [email protected]#1, but now I can make Restore with Sony Ericsson Update Service/PC Companion. Unfortunately KERNEL version is not being restored . The phone still doesn't work with DaVinci, the log is completely the same as on the previous page.
I think that DaVinci doesn't recognize the phone due to its Kernel. So my task is to somehow get the STOCK KERNEL back to my phone... Any ideas?
Are you getting the kernel info from settings > about?
I used the aZuZu kernel downgrade file I think. Wasn't paying too much attention as I was a bit panicky
Stu| said:
Are you getting the kernel info from settings > about?
I used the aZuZu kernel downgrade file I think. Wasn't paying too much attention as I was a bit panicky
Click to expand...
Click to collapse
Yea, I'm getting kernel info from that place.
Neither flashing aZuZu downgrade file chanes my kernel.
What file was used to unlock the bootloader?
Sent from my X10 using XDA App
I never unlocked bootloader of my x10i ..
I just simunlocked my phone from a local shop ..
But on S1tool it shows like this ..
Welcome to S1 tool.
RUNNING S1_EROM VER "r8A033"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "r4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_2.1.B.0.1
CUSTOM VERSION: 1235-7836_R9B
FILESYSTEM VERSION: WORLD-1-4-8_2.1.B.0.1
NOT RECOGNIZED SIMLOCK CERTIFICATE
MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
Elapsed:7 secs.
Why is it showing small "r" , if i have not unlocked bootloader?
i really need urs help im into trouble i had brick my cell now i cant unbrick my mozart wp7 see what i did
i use spl rspl hspl by dft and i use rspl to ospl 1st i had orignal botloader version 1.23 and now i got 1.32 i was using deepshine 2.0 after thet i successfully flash rom i went back to install a new rom its stuck on bootloader rom and sometime HTC logo in green color and vibrate few time no more windows just give me suggestion waiting for urs kind respnce
Regards
Mohsin Raza
Your Bootloader shows "HSPL1.32xxxx" in the first and "CotullaHSPLxxxxx" in the second Raw?
Then you can flash a Custom ROM .
If you has restored the "OSPL"back, then you only can flash Stock ROMS from your Provider.
Make a Hard reset first .
ok here is what i try alrady
i press power+vol up+down for a hard reset and press andykey to reset and 1st i install RSPL i have 1.23 bot loader then after installing rom successfull i got 1.32 what that mean after that i cant install any other rom and my firmwere has been bricked its stucked on HTC logo few imes vibrate
Again: You have HSPL or not ?
yes i have but no luck i guess i need to repair my spl downgrade back to 1.23 orignal spl but how? right now i have 1.32 i did everything
The HSPL Bootloader is 1.32 !
If you want to get back to original Bootloader you can restore it with the same Tool , only select "OSPL" before.
After that you can flash you Stock ROM from your Provider.
After this , you have the actual SPL from Stock ROM on your Phone ...
soory for a late responce but i did that alrady no luck now i had sent my htc to care center for unbrick and install a official rom...after that i will not stop doing exparement on my mozart but i will be careful next time thanx for urs advice thanx
Regards,
Mohsin raza
will you please PM me for how to get official ROM for my phone
OS version:7.10.8783.12
Firmware revision number: 2250.21.51303.401
Hardware revision number: 0004
Radio software version: 5.71.09.02a_22.51.50.21U
Radio hardware version: A.102.0.D4
Bootloader version: 5.13.2250.3(135167)
Chip SOC version: 2.2.5.0
Hi,
I have got a broken U20i which i want to repair, if possible.
Do not know anything about the history of the phone and what has caused the damage.
The led does not work, when it is started it comes a short vibration and afterwards for several seconds the backlight of the display.
The backlight returns every 20 seconds, and it seems that the accu is charged - that is all it does.
With SEUS and PC Companion updates are possible without any problems.
S1 Tool lists:
27.05.2013 16:46:31 RUNNING S1_EROM VER "R8A029"
27.05.2013 16:46:31 SOFTWARE AID: 0001
27.05.2013 16:46:31 LOADER AID: 0001
27.05.2013 16:46:33 FLASH ID: "002C/00BC"
27.05.2013 16:46:33 LOADER VERSION: "R4A045"
27.05.2013 16:46:33
27.05.2013 16:46:33 MODEL (from GDFS): U20i
27.05.2013 16:46:33 SOFTWARE VERSION: 1235-3411_2.1.1.A.0.28
27.05.2013 16:46:33 CUSTOM VERSION: 1245-6257_R9B
27.05.2013 16:46:33 FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.28
27.05.2013 16:46:33 SERIAL NO: CB*******B
27.05.2013 16:46:33
27.05.2013 16:46:33 SEMC SIMLOCK CERTIFICATE
It was possible to unlock the bootloader and to flash the kernel with Flashtool and to set it back to fabricmode with SEUS.
After each procedure the phone does not start.
I tested the touchscreen and the display - both are working.
Is there anything to do exept jtag?
kadodo said:
Hi,
I have got a broken U20i which i want to repair, if possible.
Do not know anything about the history of the phone and what has caused the damage.
The led does not work, when it is started it comes a short vibration and afterwards for several seconds the backlight of the display.
The backlight returns every 20 seconds, and it seems that the accu is charged - that is all it does.
...
It was possible to unlock the bootloader and to flash the kernel with Flashtool and to set it back to fabricmode with SEUS.
After each procedure the phone does not start.
I tested the touchscreen and the display - both are working.
Is there anything to do exept jtag?
Click to expand...
Click to collapse
I don't think a jtag will do you any good since flashing kernels and firmware seems to work fine, and all a JTAG does is force the phone to accept factory firmware, something you have already done with seus.
The little vibration is the standard indicator that the phone is turning on and you can release the power-button, so that's normal too.
I guess there is a hardware fault somewhere. It may be something very simple like the flex that connects the screen to the rest of the phone (the motherboard and battery etc. is all underneath the keyboard on the u20) and it is the most common cause of failure on that phone. If you can see visible damage to that then that would be my first port of call.
But I can't guarantee that that will fix the problems the phone has. I wish you good luck with it though, I love these little phones and there's nothing else like it on the market.
Thanks for your answer.
The flexcable is broken.
Now I have changed the flexcable and the u20i nearly works fine.
During the repair I disabled the wlan-antenna.
Can anybody tell me (or even better show me) where I can find this antenna?
PC compenion
Problem:
There is no avaliable software for your device.
Details:
sony update engine has no available software for your device
by S1Tool
RUNNING S1_EROM VER "R8A028"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "00EC/00BC"
LOADER VERSION: "R4A045"
MODEL (from GDFS): E10i
SOFTWARE VERSION: 1235-3408_2.0.2.A.0.24
CUSTOM VERSION: 1237-2940_R7B
FILESYSTEM VERSION: VIVO-1-2-5_2.0.A.0.504
SERIAL NO: BY900A4X43
i tried a lot of ways, but i think if someone got these erros and fixed, maybe can help me.
i think after installed a recovery files the phone than it changed to e10i, and after that the pc companion dont fix my phone anymore and show that message.
how can i change it back to e10a?
before getting errors i did root the phone, installed xrecovery, and installed Cyanogenmod 2.3.7 using recovery, after that the phone stucks on SE logo and show me that is e10i now.
baseband is M76XX-TSNCJOLYM-53404006
i think it is my error
Try flashing the stock ftf file using flashtool :-/