I'm currently in South Korea and need my phone to read incoming SMS that is in Korean language. Right now, I'm running HyDroG3nics 23.03 and unable to read Korean characters when I receive an SMS (English works perfectly).
1. What does it take for a custom ROM to be able to read incoming SMS messages in different languages?
2. Is there a third-party application I can use for this to work or do I just have to flash back to my stock ROM from a Korean carrier?
Related
So I have flashed my phone firmware from KE1 to KE7 using Odin. However, I notice the Swype languages is missing a few languages I had back in KE1....noticeably the lack of Japanese. Before the update I really liked using japanese input for Swype rather than Simeji.
My phone is a UK unlocked version from Handtec so the CSC should be unchanged from stock ie XEUKD1.
Does anyone know what I'd need to do to get the languages back again??
Elythor said:
So I have flashed my phone firmware from KE1 to KE7 using Odin. However, I notice the Swype languages is missing a few languages I had back in KE1....noticeably the lack of Japanese. Before the update I really liked using japanese input for Swype rather than Simeji.
My phone is a UK unlocked version from Handtec so the CSC should be unchanged from stock ie XEUKD1.
Does anyone know what I'd need to do to get the languages back again??
Click to expand...
Click to collapse
the CSC for KE1 and KE7 were the same so it should be included if it was there orignally. i did just notice that the stock keyboard has the option of 30 languages but the swype keyboard only has 28. maybe on have a check if it is on your normal keyboard and not the swype one.
if all else fails:
http://www.nerdnirvana.org/wp-content/uploads/2011/05/japan-keyboard.png
No it doesn't show up on the Samsung keyboard either. But I did make the same observation as you that the language list under Samsung keyboard is different than that of Skype.
I suspect that the first batch of SG2 (which I got) had a different Swype language library. And during KE7 updates the library is updated and now it is gone.
My current Swype version is: 2.70.75.22981.22983.663.OXX
I wonder if the OXX text in the back designate a language library?
Hi there, just wondering my friend has brought a Galaxy S2, we brought ours from New Zealand, anyway friend is Japanese and he wants his phone in Japanese language(whole phone interface), when i goto "Settings -> Language & Keyboard -> "Select Language" there is no Japanese language in the selection, is there a way i can install a pack so it shows up in there, or flash the Hongkong firmware that may have the Japanese in the Select Language menu.
thanks
Languages are contained within something called a "CSC"..
Read up on those and find the correct one in the Development section.
(Cant guarantee you there is a japanese one, I would imagine there is though.)
get some multi csc from the forum here.
so, if i find the releavant CSC in the forum, do i use the dial pad method or just use ODIN to flash the CSC by itself
thanks.
mrvtec69 said:
so, if i find the releavant CSC in the forum, do i use the dial pad method or just use ODIN to flash the CSC by itself
thanks.
Click to expand...
Click to collapse
This is the thread your looking for.
OMKF2 firmware supports English/Japanese/Korean language. DCM is the CSC I believe.
when i flash the CSC, i get a error, "cannot acesss vnz csc" when it boots up seems like my csc is locked to the carrier firmware im using. if i flash the OMKF2 that wont add to my binary counter and OMKF2 seems like its for the M202S.
this is the current firmware im running: PDA:XWKE7| PHONE:XXKE4| CSC:VNZKE2
anyone ???
I've read what have been said and went on the other thread where I saw written :
CSC has nothing to do with what languages the firmware supports and it will not add keyboard language support either.
Click to expand...
Click to collapse
mrvtec69 have you been able to find a solution ? As far as I am concerned I would just like a japanese keyboard with which I can write texts that can be read by the recipient.
So far, simeji and all the other downloaded keyboard allow me to write texts in japanese, but those texts appear as "???????" on the recipient's phone and I'm pretty sure that a "native" japanese keyboard would solve the problem.
Hi all,
Just updated my stock phone to the new Villain Rom 2.3. All working nicely so far apart from I have no working predictive text. How can I enable this please?
Thank you.
Settings > Language & Keyboard > Samsung Keyboard > XT9
It is turned on but it does not work.
Probably because your language is not installed?
Sent from my GT-I9100 using XDA App
i'm having the same problem
have enabled XT9
have selected my language as English (Australia)
and i have reflashed and re-installed the rom a 2nd time now
as prodygee says, the selected language probably is not installed.
Change the system language to other (system language not keyboard supported language)
I have the same issue with XXKG2, it was set to Spanish (United States) and predictive text didn't work, then I changed to Spanish (Spain) and the XT9 works!
is system language
settings > language and keyboard > select language ?
Try flashing the appropriate CSC for your region, read in another thread that it may help.
got any links mrxd?
im in australia with optus
dafidav said:
got any links mrxd?
im in australia with optus
Click to expand...
Click to collapse
Yes
Optus OPSKF2 CSC: http://www.multiupload.com/I1VH6XKGW0
Optus OPSKG1 CSC: http://www.multiupload.com/EPWZTIMS1F
These are thank to intratech, see his thread in the dev section
thanks mrxd
whats the difference between the two? or better yet, which one should i use if my kernel version is 2.6.35.7-I9100XXKG6-CL425236
thanks
2.4.2 has auto completion working fine
Ok, so as I understand it, I need to install a CSC file in order to restore working predictive text.
I have Villain Rom 2.3.0 installed.
Android version: 2.3.4
Baseband version: I8199XXKG3
Kernel version: 2.6.35.7-I9100XXKG1-CL349526
I am in the UK on the Vodafone network, however the phone was bought brand new from Samsung with no carrier lock.
Which CSC do I need to use please? Thank you for your help.
I got this Samsung GS2 from an export set seller. Apparently my set's kernel version is UHKI2 which I believe belongs to Latin American markets. I would like to change the firmware to either a US based version or UK based version, simply because the User Dictionary XT9 offers me words in either Portugese or Spanish everytime I try to sms.
Is there a way I could override the existing User Dictionary XT9 or do I have to flash either a UK or US firmware?
Please advise.
PS> BTW I have rooted the phone with CF-Root downloaded through this forum.
Thanks
Please use the Q&A Forum for questions Thanks
Moving to Q&A
hi ,
first, my english is poor lol sorry. i bought galasy S3 from china 2 months ago and it chinese-android is very different from international android, e.g no google play etc...so i installed a samsung official ROM with odin. I9300XXALE8.
Now everything is OK unless my "text message" fonction, so i can't send or receive any text message. when i push text message the phone marks "message stopped"
what can i do to fix this ?
thank you
Samsung Galaxy S3 blue
Android 4.0.4 / I9300ZNLH3 / XXALE8
MMMS app settings message centre check correct number .
jje