Okay this is retarded, Gummy, Eclipse, now B16 of Axiom, every time I go to make a phone call from the contacts directory and choose a stored contact, Screen goes completely black and I can't even wake it up from its current state. I haven't heard anybody here complain about this issue. I am flashing the rom completely step by step from the instructions. I am using Safestrap 1.09 (Just updated 5 minutes from the creation of this post) but yeah, the black screen is the worst thing ever. I'll call someone right, and I can't disconnect the call because I can't access the screen! So I'm like oh ****, what do I do now. Anyone know what's going on with this black screen issue???
Thats interesting.
Did you do a triple wipe before flashing?
Related
OK, so I successfully installed the ROM. It works fine and all until I actually use openscript on the terminal. For example, I wanted to change CPU frequency. I changed it, quit the terminal, and checked the frequency in system information. It was successful. But After about a minute my screen suddenly locked and here is the current situation. The locking screen works fine (I had the pattern lock), I can even open emergency calls. But when I unlock it, the only thing I see is the notification bar (which works btw, clock, wifi , all the icons are there, I can slide it down and up and so on). Everything else is just black. The buttons work - I can quit the notification tab buy clicking back or home or something like that. But I dont see my home screen, menu, buttons - nothing. I can lock it again, and it works fine again in the lock screen but afterwards same black screen again. Reboot does not work.
So I reinstalled the rom. Immediately after installing changed the frequency and waited for a bit. Everything was fine. I installed all the crap I usually have and kept using the phone. But the next day, I got annoyed by the music player and decided to change it again via the openscript. Same thing happened. And this is where I am stuck right now (actually this is already the third time I have this problem in 3 days and it's my third reinstall of the rom, but the first one also happened after using openscript to change frequency.)
So is there a way to fix this without reinstalling the rom again, cause I've customized the **** out of it and I don't wanna do it again. If no, how can I prevent this in the future?
P.S. If this helps, when rebooting, I hear the sound before the android splash screen which is sometimes skipped and sometimes shown for an unusually short time.
P.P.S. Also, I have the apps2sd flashed.
Any help would be appreciated.
Thanks.
Got same problem
Hi,
Even I got same problem when I tried to change boot animation. Just blank screen.
But i realised it is due to, launcher app is not initiated. So tried a trick which worked indeed
Trick is when u are in a blank screen, click "HOME" button which will pop u up the list of launchers u have. Click One of them though they r not visible
Voilaa!!! Your screen is back
Regards,
Murali
I've searched with several different search strings and haven't found an answer to this question, so here goes;
When I place a call and bring the phone to my ear the screen turns off (dims?). At the end of the call after I bring the phone away from my ear, it takes several seconds for the screen to turn back on, sometimes it doesn't turn back on unless I press the power button.
First, is this the normal behavior for the phone app on the I777?
Second, is there a setting somewhere to change the delay for the "screen on after a call" (I know there is a setting in settings-display for screen time-out).
I hate to make the comparison, but on my iPhone (No flaming please, I'm reformed) the screen turned off and on very quickly and I just wonder what I need to do to get that kind of response on the SG2, during the phone call.
BTW, I'm running UnNamed 2.2.1 (Gingerbread 2.3x) with Entropy's kernel.
Thanks for any help.
Clean your screen.
You using a case? Maybe it's partially blocking the proximity sensor.
mbamberg said:
I've searched with several different search strings and haven't found an answer to this question, so here goes;
When I place a call and bring the phone to my ear the screen turns off (dims?). At the end of the call after I bring the phone away from my ear, it takes several seconds for the screen to turn back on, sometimes it doesn't turn back on unless I press the power button.
First, is this the normal behavior for the phone app on the I777?
Second, is there a setting somewhere to change the delay for the "screen on after a call" (I know there is a setting in settings-display for screen time-out).
I hate to make the comparison, but on my iPhone (No flaming please, I'm reformed) the screen turned off and on very quickly and I just wonder what I need to do to get that kind of response on the SG2, during the phone call.
BTW, I'm running UnNamed 2.2.1 (Gingerbread 2.3x) with Entropy's kernel.
Thanks for any help.
Click to expand...
Click to collapse
Ironically I had the same experience in UnNamed to I assumed it was just the nature of GB. It may very well have been as I don't have that issue with ICS based ROMS. And I like the dialer better to boot.
audiophan said:
Ironically I had the same experience in UnNamed too I assumed it was just the nature of GB. It may very well have been as I don't have that issue with ICS based ROMS. And I like the dialer better to boot.
Click to expand...
Click to collapse
OK,
I'm in the throes of upgrading to an ICS ROM, so maybe I'll just go ahead and see if that fixes the problem.
Thanks for the answers
I think its a sensor issue having to due with how long it waits to scan again after light levels are changed. No idea what stock settings are but I can say I don't have a problem with it on AOKP.
This phone has never been modified, no custom ROMS, never rooted, using the latest OS from AT&T ...
And today, for whatever reason, when making originating a phone call, and once I've hit "dial" ... the phone screen goes completely black except for the status bar at the top (the one you can swipe down). I'm saying that whereas usually, after hitting "dial" and as the phone dials, you can actually see a screen full of information (hang up botton, number/name of who your dialing, etc.) ... in this case and now, there is just a black screen.
Though there is a black screen (other than the status bar at top), I can still hear the phone ring and even have a conversation should somebody answer. But when the call is over (the person on the other end has to end the connection because I have no screen interface to do such), the screen remains blank (other than the status bar at top) and none of the bottom, permanent keys are operative either ("home" / "back" / settings / etc.). To get back to the home screen, I have to pop the battery and re insert it and re start the phone. But even then, it's acting weird: when booting, at the "Reimagine Possilbe" screen (I think that's what it says) it hangs there for about 45 seconds (usually only about 5 when functioning correctly) and will eventually end up at the home screen.
But if I originate a call, the cycle repeats.
I've completely reset the phone to factory defaults at least three times, formatted the USB storage and the whole nine yards but it remains glitched as described above.
...
So... has anyone seen/heard of this?
I'm thinking of just warrantying the phone as it's only about 5 months and I figure AT&T should have no issue as it's such a replicable problem and it certainly doesn't seem to be software related as it's completely stock and multiple factory resets have not worked but wanted to put a line out here first to see if anyone else has experienced this.
Thanks in advance for any information.
Best,
Joel.
I think the network is fugazi right now, as I had issues with the phone, and read about another user having same troubles. I'd give it a little time.
rangercaptain said:
I think the network is fugazi right now, as I had issues with the phone, and read about another user having same troubles. I'd give it a little time.
Click to expand...
Click to collapse
I sure hope so. Even though I've reset the phone (which sucks) ... I'd prefer that over having to go to the store and all...
Odd that a network problem could cause such, though ....
Thanks for the word ...
Best.
.joel
Just a llittle update ...
I changed the "Proximity Sensor" to OFF and now the normal iin-call screen appears but it never goes away, which can be problematic.
In general, I've always had the proximity sensor set to ON as this allows the in-call screen to blank after a few seconds (complete blank with no status bar at top) and then reappear when I remove the phone from my ear.
But when I re enable the proximity sensor, now ... the screen blanks immediately (excepting the status bar at the top) and never comes back ... even after my call recipient ends the call ...
I'm just gonna warranty at at the local service center; at this point (two days now with all my friends AT&T phones working fine) I'm pretty sure something is glitched with the internal sensor that manages the proximity settings ...
Thank God for warranty.
Hi guys.I have a problem with my LG G2 D802.When I answer a call or make a call,the screen goes blank and the touch doesn't work anymore.I can't do anything else on the phone.The conversation is normal and anything else seems to be ok.Please help! Thank you.
If I answer a call,the screen goes blank,I can speak normally:After the call even the other person finishes the conversation,I still can't do anything on the phone,because the screen stays blank.If I have another call this will awake the screen and it will work normally,I mean,I can take the call,answer and speak on the phone but with the screen blank again. and so on.To have the phone back to normal,I have to reboot it by switching the phone off and on again. Very strange.This happened after I unlocked the phone ,probably because I left the SIM card in ?!!! Any possible advice/solution? I tried soft and hard/factory reset with no results.
help reguading the g2 screen blackout during calls
madafis said:
Hi guys.I have a problem with my LG G2 D802.When I answer a call or make a call,the screen goes blank and the touch doesn't work anymore.I can't do anything else on the phone.The conversation is normal and anything else seems to be ok.Please help! Thank you.
If I answer a call,the screen goes blank,I can speak normally:After the call even the other person finishes the conversation,I still can't do anything on the phone,because the screen stays blank.If I have another call this will awake the screen and it will work normally,I mean,I can take the call,answer and speak on the phone but with the screen blank again. and so on.To have the phone back to normal,I have to reboot it by switching the phone off and on again. Very strange.This happened after I unlocked the phone ,probably because I left the SIM card in ?!!! Any possible advice/solution? I tried soft and hard/factory reset with no results.
Click to expand...
Click to collapse
I actually had this same issue. my g2 is rooted, but running the stock rom. it has a screen protector but nothing else that would impede the sensors.
I found that this issue never took place in well lit areas. but if at night sitting i a poorly lit room I would go to swipe the scree it would unlock for a second or two and then lock back up. in talking with a friend. I found that the g2 has in set so in the proximity of a pocket or something dark the screen dims back so as to not allow you to mistakenly hit ay button ( i.e. butt dial) i figured my proximity sensor near the ear piece was dirty and causing much less light then there actually was. at the time there wast a firmware update ( which I have now gotten) and was desperately seeking help.
I finally got the firmware update VS98012B and it seems to have solved the issue I ( and you) was having. I would see what version you are running now and then update to the aforementioned and see if that solves your problem.
PM me and let me know what road you decide to travel and if for some reason it doesn't help you we shall figure it out.
Blank Screen
I am having sort of the same issue. But mine is wether in a well lit room or dark room it doesn't matter.
I noticed that it usually happens when i receive a call, after the conversation when i hang up it does not go back to the home screen. all i get is a blank screen. the only way i can get it to generate the home screen again is by pulling down the status bar and going into the general settings and clicking home button again.
during this blank screen i can still see the status bar, and when i bring down the status bar i can see the nav buttons but they are unresponsive.
I also noticed this takes place sometimes after closing an app (noticed on netflix)
I am rooted on stock rom and TWRP recovery. Phone Model [LS-980 Sprint]
I immediately rooted so dont know if issue was there before root.
SOMEONE PLEASE HELP.
Bam9 said:
I actually had this same issue. my g2 is rooted, but running the stock rom. it has a screen protector but nothing else that would impede the sensors.
I found that this issue never took place in well lit areas. but if at night sitting i a poorly lit room I would go to swipe the scree it would unlock for a second or two and then lock back up. in talking with a friend. I found that the g2 has in set so in the proximity of a pocket or something dark the screen dims back so as to not allow you to mistakenly hit ay button ( i.e. butt dial) i figured my proximity sensor near the ear piece was dirty and causing much less light then there actually was. at the time there wast a firmware update ( which I have now gotten) and was desperately seeking help.
I finally got the firmware update VS98012B and it seems to have solved the issue I ( and you) was having. I would see what version you are running now and then update to the aforementioned and see if that solves your problem.
PM me and let me know what road you decide to travel and if for some reason it doesn't help you we shall figure it out.
Click to expand...
Click to collapse
I decided to open the phone and check the proximity sensor.I unplugged the proximity sensor ribbon and guess what:IT WORKS.without the functions of the proximity sensor and LED.But at least,I have the keypad and the screen on during a conversation.I have even the knock-knock function.Probably,I will use it like that until a kit-kat update will be available.Thanks for your answer.
VS980 Black Screen
I have a customer phone that I replaced the LCD and Digitizer on. The new screen works fine but...now when a SIM Card is in the phone and I dial out a thin horizontal line appears in the middle of the screen and then the screen goes black.
If I remove the SIM card and place a call, the phone gives me the standard "Emergency Calls Only" and goes back to the dial pad.
The SIM Card is not activated but it is recognized by the phone.
Has anyone else had this issue? I tried a factory restore with no luck.
madafis said:
I decided to open the phone and check the proximity sensor.I unplugged the proximity sensor ribbon and guess what:IT WORKS.without the functions of the proximity sensor and LED.But at least,I have the keypad and the screen on during a conversation.I have even the knock-knock function.Probably,I will use it like that until a kit-kat update will be available.Thanks for your answer.
Click to expand...
Click to collapse
Hi,
I have the same issue , my screen turns black when calling or receiving calls , i m not really good with my hands... so do you know other solutions to disable the proximity sensor ?
thanks
Same issue here - LG G2 screen turn off and goes blank during conversations
I have exactly the same issue - LG G2 D802 screen turn off and goes blank during conversations.
Thanks to @Bam9 and @EtherBoo , who suggested to clear the proximity sensor from the outside and squeeze the top left corner of the phone, I tried to clean it and put some stress on it - and it worked!
Another issue which I also have and is also caused by the proximity sensor is that the screen stays on and the touch buttons in the dialer aren't responsive - which means we can't switch to speaker, add a call, mute, etc... However, the main touch / navigation button (home, back and menu buttons in the bottom of the screen) are responsive, in addition to the status bar.
(This issue was already reported by @athorax here)
In both of these situations the only quick way to end a call is to pull down the status and notifications bar and hang up from there.
I have a glass screen protector (which don't block the proximity sensor), and I am rooted and using CyanogenMod 11 ROM.
I used ioroot to root and AutoRec, which comes with TWRP 2.7.0.0, to install CyanogenMod ROM.
However, going back to stock ROM (in my case, LG G2 D802, it's D80220C) won't help since the issue still exists.
What I'm sure is that it was pretty much okay in the beginning, and the situation became worse and worse - occurring randomly, until it arrived to a situation in which I can't use the phone properly during conversation.
Now that I discovered that I can put some stress on the proximity sensor it seems that I have a hardware rather than a software issue.
Bam9 said:
I actually had this same issue. my g2 is rooted, but running the stock rom. it has a screen protector but nothing else that would impede the sensors.
...
i figured my proximity sensor near the ear piece was dirty and causing much less light then there actually was. at the time there wast a firmware update ( which I have now gotten) and was desperately seeking help.
...
I finally got the firmware update VS98012B and it seems to have solved the issue I ( and you) was having.
Click to expand...
Click to collapse
So for you it was a software issue?
Is your sensor working until today with no issues?
ingoljosh said:
I am having sort of the same issue.
...
I am rooted on stock rom and TWRP recovery. Phone Model [LS-980 Sprint]
I immediately rooted so dont know if issue was there before root.
Click to expand...
Click to collapse
I'm also rooted and with TWRP.
Did it happened before you rooted?
Did you used ioroot to root andAutoRec to have TWRP?
You see, I'm really trying to find the similarities between us all in order to solve this issue...
madafis said:
I decided to open the phone and check the proximity sensor.I unplugged the proximity sensor ribbon and guess what:IT WORKS.without the functions of the proximity sensor and LED.But at least,I have the keypad and the screen on during a conversation.I have even the knock-knock function.Probably,I will use it like that until a kit-kat update will be available.
Click to expand...
Click to collapse
We already have KitKat based firmware update. For me it's D80220C.
For you it might be already D80220D. Use this link to check your version, and replace the IMEI in the end of it with your IMEI.
BobbyLG said:
...now when a SIM Card is in the phone and I dial out a thin horizontal line appears in the middle of the screen and then the screen goes black.
If I remove the SIM card and place a call, the phone gives me the standard "Emergency Calls Only" and goes back to the dial pad.
Has anyone else had this issue? I tried a factory restore with no luck.
Click to expand...
Click to collapse
When you place the call you do hear that the call is made?
If so - then you have exactly the same issue.
What is your model, what ROM are you using, and did you root your phone?
I have LG G2, unable to make call. The signal strength is fine. I have tried reinserting the sim. but i am able to receive calls. when i make a call the dialup screen come up and call ended automatically. Any Help
Not always but at random times when I receive a text or a call the screen would stay black and wouldn't allow me to receive the call etc. The rings would keep going but the screen stays black. I am using Cyanogenmod latest nightly and AGNi kernel. Is there any way to fix this?
But if I give some time, the screen is back up. Happens during and after calls too. It's not a regular thing but it would happen randomly once a day or so.
It sounds as though the screen sensor isn't detecting the call. I know this is a common issue in a few lollipop based roms. One reason I personally haven't stayed on an LP rom. I believe that you can change certain settings in the build.prop file but as to what they are exactly I'm not familiar. You would need to search a few sites to confirm.