HELLO...
this is a port of codename android [CNA] from the atrix nightly and the nexus s 4g nightly found here: http://codenameandroid.org/
using jokersax cm9 as my base..... the man can be found here: http://www.jokersax.com/
Brought to you by:
TEAM MOTO TEGRA
what doesnt work:
you tell me!
MUST BE UNLOCKED AND ON 198_6 OR 198_7...THANKS!!!!!
instructions: for best results fresh install is recommended
* fresh install process:
reboot to recovery use jokers recovery cwmv3 http://www.jokersax.com/developer-pa...enmod9-photon/
use th3bill's wipe all zip http://www.mediafire.com/download.php?09s7943ps87rwed ...... or
format system, data, cache
flash rom, flash rom a second time, flash gapps, flash kernel optional, fix permissions, and then reboot phone
* to flash over/update:
use th3bill wipe cache zip http://www.mediafire.com/download.php?t0ctb4am6ftbw42 ..... or
wipe cache and dalvick cache
flash rom, then flash rom a second time, flash gapps, flash kernel optional, fix permissions, and then reboot phone
* if you run into some fc's reboot into recovery wipe dalvick cache and fix permissions the reboot phone
mms troubles? follow these steps:
apn edits: after you boot for first time and get settled in open voice dialer and say apns then edit this information as well as delete/remove the cdma0 apn settings only need two cdma1 and uscc
1st one:
Name: CDMA
APN:1
MMSC: http://mms.sprintpcs.com
MCC: 310
MNC: 120
APN type: mms
APN protocol: IPv4/IPv6
APN roaming protocol: IPv4/IPv6
2nd:
Name: USCC
APN:internet
Port: 80
MMSC: http://mmsc1.uscc.net/mmsc/MMS
MMS port: 80
MCC: 310
MNC: 120
Authentication type: PAP or CHAP
APN type: mms
APN protocol: IPv4/IPv6
APN roaming protocol: IPv4/IPv6
Reboot after setting up Both of them.
USCC apns: [thanks byte]
for mms to work with USCC
you need to enter username and password.
username is [email protected]
password is min
replace min with your actual min
min is usually your phone number..
delete all other apns
and you should be good to go
PLEASE READ!
Some observations on tablet mode:
*enable tablet mode:
click on lcd mod app in app drawer then set to 144 allow root permissions
accept the reboot, go back into the app after reboot and click the fix market button
*enable larger fonts:
Settings/Display/Font Size/Select Huge
*Add button "menu"
Settings/Interface/Navigation Button quantity: "4"
Settings/Interface/Navigation bar/Button 4 Action & Icon: select "Menu"
*have fun with your mini tablet full of tweaks!!
*looks great in roation i would suggest trebuchet launcer..
*to change back set your lcd Density back to 240 using same method above
current build: based on jokersax cm9 6.9.1 and CNA rc2 released via twitter 5/12/2012
currently i havent uploaded to jokers use goo for now
CODENAME ANDROID LINK
if jokers site is down can go to goo-inside.me look in devs/spleef
please be sure to report your experience anything and everything..thanks
MAJOR THANKS TO QBKING77 FOR HIS INSTALL AND REVIEW VIDEOS!!!!
qbking77 youtube channel: http://www.youtube.com/user/qbking77/featured
*How to install:
http://www.youtube.com/watch?v=ZZvVQ7GpDFg
*Review:
http://www.youtube.com/watch?v=Db_7oyfX2w0
Thanks will give it a try.
Sent from my MB855 using Tapatalk 2
Downloading now.
Sent from my MB855 using xda premium
Shweet, more Roms for us to flash. MAN I LOVE OUR MOPHOS lol
MoPhoACTV Initiative
Beautiful work.. even more options. Everything is working great so far. Thanks for all the hard work.
Sent from my MB855 using xda premium
I actually just switched to the photon from the nexus s 4g last week. Codename was my daily rom and was amazing. Thanks so much for porting it!
Sent from my MB855 using xda premium
Camera isn't working for me. Love the options. I think it has more than miui.
Sent from my MB855 using Tapatalk 2
bricky23 said:
Camera isn't working for me. Love the options. I think it has more than miui.
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I forgot a few files speakerphone staticy too don't worry though easy fix when I get off work at 5pm cst us
MIUI/ICS for the Photon
http://forum.xda-developers.com/showthread.php?t=1536161
wow i really should have looked this morning, umm cna is compiling atm for the photon. if you want i can get you up to speed on the build and turn it over to you.
Nice , will give it a ride as soon as you upload a fixed version.
Sent not from your device!
ok speef cna is built for the photon, but it has alot of issues i didnt have time to fix. however it will give you everything you need to fix this version, including camera. eventually ill fix the rest and hand it over to you if you feel like maintaining
jokersax11 said:
ok speef cna is built for the photon, but it has alot of issues i didnt have time to fix. however it will give you everything you need to fix this version, including camera. eventually ill fix the rest and hand it over to you if you feel like maintaining
Click to expand...
Click to collapse
cool bud got your email will combine the two and see what's shaking
MIUI/ICS for the Photon
http://forum.xda-developers.com/showthread.php?t=1536161
I LOVE OPTIONS! Can't wait for the Kitchen Sink
Sent from a [email protected] of a MoPho
This CNA build seems pretty solid so far other than the camera issue.
b4ifuru18 said:
This CNA build seems pretty solid so far other than the camera issue.
Click to expand...
Click to collapse
don't click speaker phone then...lol static forced reboot after next call out or in....LOL had same problem with v10 so i already know how to fix and camera I've been fixing do no issue there was just my dumb ass forgetting s few things... no worries I get of at five this first thing I'm doing
MIUI/ICS for the Photon
http://forum.xda-developers.com/showthread.php?t=1536161
spleef said:
don't click speaker phone then...lol static forced reboot after next call out or in....LOL had same problem with v10 so i already know how to fix and camera I've been fixing do no issue there was just my dumb ass forgetting s few things... no worries I get of at five this first thing I'm doing
MIUI/ICS for the Photon
http://forum.xda-developers.com/showthread.php?t=1536161
Click to expand...
Click to collapse
Don't really use speakerphone much.
Battery life went a little spaz earlier tis' all.
b4ifuru18 said:
Don't really use speakerphone much.
Battery life went a little spaz earlier tis' all.
Click to expand...
Click to collapse
ouch yeah thats s dump alright..... No worries todays build hopefully will solve the issues.... did you have gps,bt, or Wifi on? what were you using phone fire during that time frame will help to figure if out
MIUI/ICS for the Photon
http://forum.xda-developers.com/showthread.php?t=1536161
More options than miui? Really?
I might have to try this (ofcoarse I'll buufify it first )
Peace
Byte
bytethegroove said:
More options than miui? Really?
I might have to try this (ofcoarse I'll buufify it first )
Peace
Byte
Click to expand...
Click to collapse
basically from what I can tell it is cm9, aokp, and some miui rolled into one I had to restore since I needed fully functioning phone for work but was for sure worth a flash even with what is broke
MIUI/ICS for the Photon
http://forum.xda-developers.com/showthread.php?t=1536161
flashed it this morning. it was excellent. only reason I restored was because I couldnt recieve MMS. tried setting up the APNs and that didn't work. and ofcourse we already know about the camera. I also missed the sms app from miui. if someone
wanted to port that sms app to cm9, I'd pay for it. or tell me how to do it, that would work too...
Related
Guys
I so wanna use this ROM, but i cannot ge my APN settings saved?
I factory resetted, i wiped, and tried
Fastboot -w
Nothing works, after i save my APN, its not saving, and there is no APN displayed?
How can i get past this?
Thanks alot!
I had this issue as well. I noticed that after switching Select Operator from Automatic to manual, and selecting your desired network, that the issue was fixed. Just takes a minute or two to kick in after a reboot.
Neroga said:
I had this issue as well. I noticed that after switching Select Operator from Automatic to manual, and selecting your desired network, that the issue was fixed. Just takes a minute or two to kick in after a reboot.
Click to expand...
Click to collapse
Aw, tried it man, does not work
Not sure, this is the only ROM i get this on, even tried 2 different kernels......
Back to CM7
The most stable ROM I've seen, so far, is Nottach's Wet Dream 1.4.3 FullBlur. Works well signal-wise especially when you live out in BFE.
Sent from my MB860 using XDA App
Hi all,
I've posted a couple times before on getting the wifi working on stock Moto android for the photon, I cannot reply on the dev forum discussing this cm9 rom as I'm allegedly less than 10 posts or something.
Each time I boot up with aeroplane mode off (so all network stuff is on) com.android.phone crashes and I just have to press ok, it happens again each time I enable then disable aeroplane mode or type *#*#4636#*#* and turn off then on the radio.
I cannot get any mobile connection, I think the radio cannot turn on as the GSM service is "radio off".
Any ideas on how I should troubleshoot, I think loads of people have the issue but the recommended fix does not work for me (and others).
The recommended fix is to edit /system/build.prop and change ro.telephony.default_network from 7 to 0 and this does not work for me (editing it with root explorer).
I understand that it changes the network type to WCDMA prefered (I think that is another name for UMTS). One can also change the prefered network using the above code in the dialer and scrolling down to just above the button to turn the radio off/on.
Any ideas?
Update:
Sorry for taking ages to reply, seems like most people using the mopho are on Sprint using CDMA and so don't have issues, I'm in Australia on Vodafone so use GSM(2G)/WCDMA (3G).
I got this working ages ago and after a few version changes, I'm now on beta 0.4.5.1 as camera would freeze after taking a picture (including freezing the camera system so face unlock stopped) on beta 0.4.4.
Yes, reflashing rom after editing ro.telephony.default_network to 0 does fix it, but one does not have to reflash, just reboot into recovery and do factory reset other basics may work, though I tried cache, dalvik cache and permission fix, that did not seem to fix it for me. I think factory reset in recovery formats: data, cache, ext-sd/android....something file and one or 2 other things.
I think formatting data gets rid of all your settings, maybe one does not need the data reformat, I wonder if the android file on the SD card has certain settings with the RIL.
When you are having the GSM issue and no signal, under the more menu which is under wireless & networks, there is no "mobile networks" option and when dialling *#*#info#*#* (4636) under phone information, I think GSM service says "radio off".
Yes, after I did make a post, it did say 4 posts and then I actually knew I how many I had done, I was unsure as I had posted quite a lot about the early wifi issues when Spring crippled the original rom but I was also posting in the Moto owners forum and could not remember how many posts I had done in this forum.
Any way, will update if I think there is anything else useful to add/ask. I just love the openness of Android, especially compared to the iPhone, its just so great that someone may download the source and port it to a device such as what Joker and the others helping him out did, so now we have ICS on a very powerful and capable device. As much as Jobs may have had all sorts of issues with similarities between Android and iOS, we have more use from it and "like" google better from it (without spending crap loads of money on one of like only 2 devices available, we just have soooo much choice;-)
Fisher
Ok, so I understand that editing the file line above (/system/builld.prop , line ro.telephony.....) to 0 instead of 7 sets the network as WCDMA prefered (it even says so in the file just above the line you edit).
When dialing *#*#4636#*#*, I see GSM auto (PRL) instead of WCDMA prefered even after reboot.
It seems that the system is not reading that part of the build.prop file or its being over ridden by something else, how can I troubleshoot?
It stays on GSM auto (PRL) even if I change it in the dialer, exit and then type the code back into the dialer.
Have you tried relishing from scratch? & start from cm9 0.1.0 2d not 0.2.0 . I say that because when I first tried cm9 I started from cm9 0.2.0 and I had lots of problems and battery drains fast but then I clean everything off and redone it from cm9 0.1.0 2d note everything is working like it should even better . Hope you getting going...
Sent from my MB855 using Tapatalk
If I remember what was said in the cm9 thread you have to edit build.prop from the zip, and then flash, not edit after flash or it doesn't work.
I'm a MoPho-in Martian
Cm9 v2 is running great on my photon
Sent from my MB855 using Tapatalk
partycove said:
Cm9 v2 is running great on my photon
Click to expand...
Click to collapse
Same here!
fisher.grubb said:
Hi all,
I've posted a couple times before on getting the wifi working on stock Moto android for the photon, I cannot reply on the dev forum discussing this cm9 rom as I'm allegedly less than 10 posts or something.
Click to expand...
Click to collapse
Sounds like the other guys have you helped with the FC portion, but nobody has addressed the first complaint. You're currently showing as having 5 posts to me when I look at your profile, so it's not alleged you're under 10 posts, you are under 10 posts. The word "allegedly" implies you disagree with that post count and if so, I'd suggest contacting an admin to have it looked into. I don't spend too much time on XDA so unfortunately I don't know who (specifically) to suggest you contact.
Hope you get it all sorted out! Cheers!
post count
ya the to little post count thing is semi wack. i understand why its there, but i deff still feel you pain. I have been a avid reader of most everything mopho related since about October, but am not much of a poster until not i guess
voicemail
I have ics on my mopho but Im not getting any voicemails. When I get a call and it goes to voicemail i receive a text that says I have received a voicemail and to call a weird number. When I do sometimes it asks me if I have a new phone with voicemail and sometimes its just a busy tone. Is anyone else having this problem?
FernBch said:
If I remember what was said in the cm9 thread you have to edit build.prop from the zip, and then flash, not edit after flash or it doesn't work.
I'm a MoPho-in Martian
Click to expand...
Click to collapse
How do you edit files in the zip? Im trying to replace the APNS file but i cant delete the old one. When I unzip it, replace the file, then rezip it, the file fails to flash. Any suggestions?
---------- Post added at 02:43 PM ---------- Previous post was at 02:42 PM ----------
ChadH42 said:
Same here!
Click to expand...
Click to collapse
Did you have to fix MMS on yours. I've tried the fixes but I still can't get it working.
partycove said:
Cm9 v2 is running great on my photon
Sent from my MB855 using Tapatalk
Click to expand...
Click to collapse
How is the battery life compared to 2.3.4?
cm9 ics beta 2 memory bug
I just flashed my epic to cm9 beta 2 and its been workin fine all day and now I'm getting error messages about it being "low on memory". Is there a fix for this??
tengengegas said:
I just flashed my epic to cm9 beta 2 and its been workin fine all day and now I'm getting error messages about it being "low on memory". Is there a fix for this??
Click to expand...
Click to collapse
Why would you ask that in a Photon forum?
Hey guys, i have straight talk with all apn settings on and 4g working however, this has to be the most difficult time I have EVER had with a phone. The service constantly goes in and out even with all bars present at times. These are the problems i have:
1. When wcdma and 4g is enabled, calls to others take long to start and state "conditional call forwarding active". Sometimes I cannot answer calls because it scrambles and makes crazy sounds.
2. When gsm is enabled with edge, everything seems to work fine with no issues. "Conditional call forwarding active" never appears
I have tried the following modems and none seem to fix the issues in terms of full 4g service and a working phone
Kid test modem - Blaze modem (tmobile)
UCLF6 alone and embedded in the UCLF6BS rom
Ucle2 modem
Uclf5 modem
Goldie b5 rom
None of these radios/modems seem to fix the issues, if they do, sometimes its temporary. There are no outages in my area, is Straight talk service really bad, or is it the phone??? I just dont get it.. Am I flashing wrong? I have been flashing with TWRP and have not used CMW since. I flash the modem then clear cache and dalvik. Am I missing something?? Please help, thanks so much
Im running Blackstar 8 no added on modem radio or nothing the problem your having is in the apn settings your using go in change proxy to not set .remove port #.and add authentication pap or chap keep your
mms proxy the same let me know how you make out
Agreed .....
APN issues are "very " likely the cause of your issues ...g
Hey guys, thanks so much for the response. So far I am still getting the "Conditional call forwarding active" popup right when the call starts. I will be able to give it a test run in Manhattan to see if I get the issues I had before. Thanks so much guys, will keep you updated
gregsarg said:
Agreed .....
APN issues are "very " likely the cause of your issues ...g
Click to expand...
Click to collapse
jxs714 said:
Hey guys, i have straight talk with all apn settings on and 4g working however, this has to be the most difficult time I have EVER had with a phone. The service constantly goes in and out even with all bars present at times. These are the problems i have:
1. When wcdma and 4g is enabled, calls to others take long to start and state "conditional call forwarding active". Sometimes I cannot answer calls because it scrambles and makes crazy sounds.
2. When gsm is enabled with edge, everything seems to work fine with no issues. "Conditional call forwarding active" never appears
I have tried the following modems and none seem to fix the issues in terms of full 4g service and a working phone
Kid test modem - Blaze modem (tmobile)
UCLF6 alone and embedded in the UCLF6BS rom
Ucle2 modem
Uclf5 modem
Goldie b5 rom
None of these radios/modems seem to fix the issues, if they do, sometimes its temporary. There are no outages in my area, is Straight talk service really bad, or is it the phone??? I just dont get it.. Am I flashing wrong? I have been flashing with TWRP and have not used CMW since. I flash the modem then clear cache and dalvik. Am I missing something?? Please help, thanks so much
Click to expand...
Click to collapse
hey man I'm also in NY on straight talk...I'm on long island and I have never experienced what you are going through .I have tried all diff roms and modems.. only difficult problem I had was no mms .that is until I just edited the apn
- GNote via Tapatalk 2
[QUO=nycokla;32963297]hey man I'm also in NY on straight talk...I'm on long island and I have never experienced what you are going through .I have tried all diff roms and modems.. only difficult problem I had was no mms .that is until I just edited the apn
- GNote via Tapatalk 2[/QUOTE]
Really? I'm still having issues. Should I try flashing with cwm instead Of twrp?? I tried what you guys said above and still no good. Man this sucks!!
jxs714 said:
[QUO=nycokla;32963297]hey man I'm also in NY on straight talk...I'm on long island and I have never experienced what you are going through .I have tried all diff roms and modems.. only difficult problem I had was no mms .that is until I just edited the apn
- GNote via Tapatalk 2
Click to expand...
Click to collapse
Really? I'm still having issues. Should I try flashing with cwm instead Of twrp?? I tried what you guys said above and still no good. Man this sucks!![/QUOTE]
I would start by using twrp,wipe everything 3 times...and just install the Rom of choice..I'm using padawan v3..then just installed the newest modem...then restart and let it sit for 10 min...if you still have problems then check your apn.if still not working call straight talk and have them reset your account
- GNote via Tapatalk 2
nycokla said:
Really? I'm still having issues. Should I try flashing with cwm instead Of twrp?? I tried what you guys said above and still no good. Man this sucks!!
Click to expand...
Click to collapse
I would start by using twrp,wipe everything 3 times...and just install the Rom of choice..I'm using padawan v3..then just installed the newest modem...then restart and let it sit for 10 min...if you still have problems then check your apn.if still not working call straight talk and have them reset your account
- GNote via Tapatalk 2[/QUOTE]
Hey guys, still no luck.
I have little to no problems when using 2g and on gsm mode, but when on full 4g, I have issues, internet cuts out and calls act up when traveling. Calls take long to start, etc.
Could it be a bad flash when the phone was first rooted? I just dont understand why I seem to be the only person with this problem. =(
nycokla said:
Really? I'm still having issues. Should I try flashing with cwm instead Of twrp?? I tried what you guys said above and still no good. Man this sucks!!
Click to expand...
Click to collapse
I would start by using twrp,wipe everything 3 times...and just install the Rom of choice..I'm using padawan v3..then just installed the newest modem...then restart and let it sit for 10 min...if you still have problems then check your apn.if still not working call straight talk and have them reset your account
- GNote via Tapatalk 2[/QUOTE]
When you say wipe everything, does this mean data, cache, dalvik, factory reset, system and even the internal sd card (emmc) where my music and files is stored?
Also, does it matter where I flash my rom from, I have been flashing it from the emmc rather than my sd card, is that a bad thing??
Just to set a bench, move everything from internal to external sd, then wipe internal, then wipe everything aside from external..then install rom from sd
- GNote via Tapatalk 2
hi guys i am having trouble with the mobile network on just this rom. i only have 3g in this area (cant wait till january so i cant test lte, but it is most likely the rom. i just cant get the phone to connect to mobile network. do i need to flash newer radio? other stock moded roms work fine. No good on cyan mod 10 roms ethier
You could try disabling it from looking to LTE service in the mobile networking options - Maybe they happen to be turning it on to test and your phone is trying to connect?
It's under Settings => <More> => Mobile Networks => Network mode => Change to CDMA / EvDO auto
I already tried changing no luck thanks for reply
Very similar in theory.. But also try this.
Go to the dialer, hit *#*#4636#*#*, go to phone information, and change to CDMA auto (prl) in the drop down list there.
regalpimpin said:
Very similar in theory.. But also try this.
Go to the dialer, hit *#*#4636#*#*, go to phone information, and change to CDMA auto (prl) in the drop down list there.
Click to expand...
Click to collapse
I'll try this when I get some time. Also is any one having same the same problems as I am? if you are NOT can you tell me exactly how you flashed the rom and gapps (if u did?) Also what kernal and radio you are using
spaghettiknight said:
I'll try this when I get some time. Also is any one having same the same problems as I am? if you are NOT can you tell me exactly how you flashed the rom and gapps (if u did?) Also what kernal and radio you are using
Click to expand...
Click to collapse
Tried all of the options in drop down menu none will
Worked
Some people are talking about earlier builds having more stable 3g can someone link me with like a 10/29 build or something
315 view no reply?
spaghettiknight said:
315 view no reply?
Click to expand...
Click to collapse
11/24 has been good to me
spaghettiknight said:
I'll try this when I get some time. Also is any one having same the same problems as I am? if you are NOT can you tell me exactly how you flashed the rom and gapps (if u did?) Also what kernal and radio you are using
Click to expand...
Click to collapse
I flashed rom then gapps, got this. then wiped and gapps then rom... same thing
I am now on SuperLTE and the problem has followed me...
Kernel 3.0.8-07680-gb6402b4
PRI = 2.45-003
PRL = 25006
I got a thread over here too about this:
http://forum.xda-developers.com/showthread.php?t=2014105
When I'm running cmx and have connection issues I usually toggle roaming in settings while its set 3g only[no lte)... This has worked for me. When I establish a connection I turn back on the 4g late radio and I'm good to go
Sent from my EVO using xda premium
regalpimpin said:
Very similar in theory.. But also try this.
Go to the dialer, hit *#*#4636#*#*, go to phone information, and change to CDMA auto (prl) in the drop down list there.
Click to expand...
Click to collapse
what happens if this is what is up there on that screen when i try to ping after I switch to all of those drop down items
Ping IpAddr: Fail IP addr not reachable
Ping Hostname(www.google.com): Fail: Host unreachable
HTTP Client test: Fail: IOException
Signal Strength: -63dBm 16 asu
Update:
So i dig some digging and found out that my GPRS service was disconnected here>
Did some more digging and found this:
http://www.nexusoneforum.net/forum/nexus-one-tech-issues-bug-reports/8254-gprs-service-mobile-network-state-disconnected.html
banccalif said:
11/24 has been good to me
Click to expand...
Click to collapse
ya i tried that got it to work. now I am having the issue where when i receive multiple mms's In one single text
(i got mms to send and download using an alternate apn found in Baffles thread under android development if you cant get it to work try rebooting after you restore the apn)
the app itself tries to open it as a slide show then instantly closes, this is a problem with the app since i downloaded an alternate messaging app and it worked fine. the reason i care is because i wanted to have the stock app working due to the "reply in notification bar" feature. can you guys try out receiving multiple messages sent at the same time from one phone to another and see if it works or if any one can link me to a working CM10 apk messaging app
Please go to this Url to reply ------> http://forum.xda-developers.com/showthread.php?p=35326334#post35326334
Cherokee4Life said:
I flashed rom then gapps, got this. then wiped and gapps then rom... same thing
I am now on SuperLTE and the problem has followed me...
Kernel 3.0.8-07680-gb6402b4
PRI = 2.45-003
PRL = 25006
I got a thread over here too about this:
http://forum.xda-developers.com/showthread.php?t=2014105
Click to expand...
Click to collapse
try the CM10 12/4 nightly or try using this guide on changing the APN ( it will say that the fix is for mms but should affect both
Sorry guys, thought we had one of these already.
Just curious about the V_2.3.1? Mostly the reception, but....
Is the Reception any better - mainly for those that have lousy reception to start with.
Are you having any issues?
I haven't heard anything yet so let me know :good:
I have decent reception at my house but I think the beta added a bar to it (from 3 to 4). Definitely better at my son's school. I was only getting 3g there but now get LTE. The big test will be at work but I'm on vacation and don't go back until next week.
I was so amazed that I actually noticed a better internet connection I never looked at my signal bars there is an extra bar or two in my house, which I swear I only had one if that all the time one thing is that I'm not sure if it is the ROM or me but shutdownani is really choppy, every since 2.2 but I try modules sometimes that make my phone unstable like xprivacy& cool tool which I immediately remove but deff noticed improved signals, like I actually see the difference
Updated to 2.3.1 to check apn, I checked apn setting. They didn't change, so I selected reset to default. Then I lost internet and apn kept selecting VM. On reboot phone app fc. Had to revert apn.config and do ##scrtn
jcfunk said:
Updated to 2.3.1 to check apn, I checked apn setting. They didn't change, so I selected reset to default. Then I lost internet and apn kept selecting VM. On reboot phone app fc. Had to revert apn.config and do ##scrtn
Click to expand...
Click to collapse
Did you use the ,DUN METHOD via master shortcut lite, hidden menu #2 4th on list, internet•, launch
Here is a screen shot. If I hit reset it will fill in the new apn added by 2.3.1 then my internet stops, and on restart phone app fc,
jcfunk said:
Here is a screen shot. If I hit reset it will fill in the new apn added by 2.3.1 then my internet stops, and on restart phone app fc,
Click to expand...
Click to collapse
You don't create a new one. You edit the top two. Just tap them and
add ,dun to the APN.
engine95 said:
You don't create a new one. You edit the top two. Just tap them and
add ,dun to the APN.
Click to expand...
Click to collapse
Yes, I already did that edit. 4 me in a specific area the 4G is slower than the 3G. I wanted to try different apns. But those APN would not connect for Sprint at all
What is the intended effect of that file? Sprint has its own APN on a profile update
Works Well for me, definitely see improvement with Switching from 3g to LTE. I also find an LTE signal much quicker. I work in NYC, before the 2.3.1 update I would struggle to get an LTE signal once I left Penn station, now As soon as I walk out it grabs a signal. engine95 you are the Man Bro.
@engine95
I think the apn.config has bad settings for Sprint OTA, I've edited going to test, should be able to activate phone with the edits.
jcfunk said:
Yes, I already did that edit. 4 me in a specific area the 4G is slower than the 3G. I wanted to try different apns. But those APN would not connect for Sprint at all
Click to expand...
Click to collapse
I'm not sure what you were trying to do prior to the above.
If you're talking the apn in the beta, It seems to work better for all of us.
If you're talking about modifying that apn for hotspot, it works also.
jcfunk said:
What is the intended effect of that file? Sprint has its own APN on a profile update
Click to expand...
Click to collapse
See above
jcfunk said:
@engine95
I think the apn.config has bad settings for Sprint OTA, I've edited going to test, should be able to activate phone with the edits.
Click to expand...
Click to collapse
The original, and the beta do the update profile/prl as they should. And "Activate device" is the telltale.
But, you can't use the beta on a fresh install. Meaning on a full ROM. It'll only work as an update.
Remind me again what issue you're trying to fix and I'll see if I can help.
Edit: In V3, it has a new zipalign binary that does what you want.
Did some testing, updating profile/prl works because it uses apn settings from activation, but if you do ##72786# which erases everything then reboots and does an activation using apn.conf.xml to connect to ota. But the setting don't work for ota. Crashes phone app and then only way to fix by wiping and doing clean install.
jcfunk said:
Did some testing, updating profile/prl works because it uses apn settings from activation, but if you do ##72786# which erases everything then reboots and does an activation using apn.conf.xml to connect to ota. But the setting don't work for ota. Crashes phone app and then only way to fix by wiping and doing clean install.
Click to expand...
Click to collapse
That would be right because it has to go through the setup all over again. Just like a clean, full rom install. And it can't find the apn it needs.
Yes, all that file is, is a hack. Not a fix.
Well I'm going to keep working on trying to make the hack safe,
The new native hosts file appears to be blocking random pictures in the play store. Not sure which URL is the culprit but I disabled the file temporarily and the pictures come back. Other than that v3 is running great. Thank you.
I didn't experience any data or APN issues, rom running good, battery real good, only thing I noticed, LEDs aren't working for any app, for me.
Visionikz03 said:
The new native hosts file appears to be blocking random pictures in the play store. Not sure which URL is the culprit but I disabled the file temporarily and the pictures come back. Other than that v3 is running great. Thank you.
Click to expand...
Click to collapse
I've seen that, too. It used to happen with the Mother of all Ad Blockers until that dev removed some entries. Some of the devs apparently host their images on sites that also serve ads.
Here's MoaAB if you're interested: http://forum.xda-developers.com/showthread.php?t=1916098
Visionikz03 said:
The new native hosts file appears to be blocking random pictures in the play store. Not sure which URL is the culprit but I disabled the file temporarily and the pictures come back. Other than that v3 is running great. Thank you.
Click to expand...
Click to collapse
Thanks.
That can happen. If they are too restrictive, then you might have to use the stock Sprint one.
joeyhdownsouth said:
I didn't experience any data or APN issues, rom running good, battery real good, only thing I noticed, LEDs aren't working for any app, for me.
Click to expand...
Click to collapse
Mine are but the timing is about 10 sec between blinks.
I guess check your settings, and maybe wipe cache and dalvic?
I just realized I don't have the native Wi-Fi calling app. Can I ##72786# from v 3.01 and get it to download or is that only on factory ROM?