Hi Guys,
After I updated my gf's firmware from HK .67 to HK .73, she has been randomly losing network signal. I updated my XPS from HK.67 to SG .73 and have experience no such issue. Anybody else have experienced or heard of this issue?
If the HK .73 is loosing signal on your gf phone can't you flash it for her to the SG .73 that your using?
Sent from my Xperia S via a quantum leap
yeah, I realized that I can do that. I just was wondering whether if this was an issue was isolated to the Hk firmware.
Related
I updated my Vodafone X10 to 2.1 (2.1 has not been released for my product code yet) and I used global generic.
I noticed that after that I started having problems with signal drops, So I reflashed a few times but still the same.
I'm not saying it's the update for sure, since it could be a problem with my phone, but has anyone experienced this?
PS: I also replaced my sim card, and still have the same problems.
xd4d3v said:
I updated my Vodafone X10 to 2.1 (2.1 has not been released for my product code yet) and I used global generic.
I noticed that after that I started having problems with signal drops, So I reflashed a few times but still the same.
I'm not saying it's the update for sure, since it could be a problem with my phone, but has anyone experienced this?
PS: I also replaced my sim card, and still have the same problems.
Click to expand...
Click to collapse
I'm with Optus and not Vodafone but I'm not experiencing anything like this.
im on Optus in Newcastle NSW and signal is good. never drops out but i get the occasional issue sending txt msgs. im on nordic 2.1 still.
Hmmm.
I think it might be my phone.
I downgraded back to 1.6, and although i havent had a any dropout yet, while comparing another nokia phone I have, i seem to get lower signal.
That's only in the hours or so since i downgraded.
I'll keep an eye on it, and report, but probably my phone being dead, and nothing related to 2.1
I have the same problems as well, i live in China.
I have singapore verision updated to 2.1, and then i always lose signal, i cannot make any phone call or people are quite difficult to call me.. this happen randomly
I flashed to global 2.1 when it 1st came out and experienced the same signal dropout that your talking about. My data signal kept dropping out and coming back. Got annoying. Eventually flashed to Optus 2.1 and everything is perfect. It's the global firmware, not your phone.
Try change your build.prop codes to the Optus au codes and see if you can use that firmware for Vodafone. Just root and delete all things Optus zoo
Sent from my X10i using XDA App
mrtim123 said:
im on Optus in Newcastle NSW and signal is good. never drops out but i get the occasional issue sending txt msgs. im on nordic 2.1 still.
Click to expand...
Click to collapse
I have this problem in Newcastle, too. I've found 'reregistering' my phone on the network fixes it.
Sent from my X10i using Tapatalk
I too have just upgraded my X10 to 2.1 Generic. Im with 3 and have had poor signal for about 18 months (since Vodafone bought into 3). Since doing the upgrade, I now have HSDPA connections and the signal strength and quality of calls has greatly improved.
I am a optus user. After i upgraded the firmware to 2.1, my wifi just stops working. When i turn wifi function on, there is wifi logo appearing on the top of the screen and never detects any wifi access point. Anyone knows what is going on? Is that a bug of 2.1? as wifi was working fine with 1.6
IM from south Africa,on Vodacom/vodaphone and have the same issue with connection dropping on data,but found that it seems to be a tower problem or network problem rather than a phone problem,at home i have no issues like this but in far out towns with graham bell old technology in the towers the issue happens alot.
Delete
I`m alone with this problem???
No mate, you are not alone, I just changed the stock rom for Sensation and I reckon I upgraded teh baseband as well to KH3 and now I am experimenting some trouble when connecting, before my network outside was faster and more reliable whenever I was but now I can hardly connec when outside and I certainly cannot connect only 2G, it only works if I have it in auto mode. The main problem is that I cannot remember what my former baseband was...
Sorry to bump but also have this issue. Vodafone uk with resurrection 1.3. Anything work best with ICS, vodafone uk? The current ones im trying are making it worse if anything.
Hi. Hope you can help me with something which is really annoying me.
Got my s3 right at the beginning on o2 with o2 firmware. When making phone calls the reception was crystal clear. I have updated various different versions of ics and jb and ever since the first update a few months ago the reception/radio quality has been poor. It started when I flashed a non o2 firmware, I flashed a stock btu firmware. Since then I have tried various firmwares on various providers and always have the same problem. If I change my phone to gsm only the call quality is fantastic but as soon as I put to auto it sets to hsdpa and goes back to poor call quality, even if I have a full bar for reception. I have since changed the csc to btu on phone and flashed various firmwares again and I still have the problem. I cannot have a £500 phone and be forced to use a 2g signal!
If it was poor from day one I would blame o2 reception but I have lived in this house for 7 years and never had this with other phones, also as said this phone was great originally but after flashing various firmwares it's rubbish now. I am currently using the new o2 jb update released today (my phone csc is btu) I hoped this flash would resolve issue but it hasn't.
Hope this makes sense and hope anyone can give me any tips to resolve my problem! Current signal strength 89dBa 12asu and still poor.
Thanks in advance.
Matcarroll said:
Hi. Hope you can help me with something which is really annoying me.
Got my s3 right at the beginning on o2 with o2 firmware. When making phone calls the reception was crystal clear. I have updated various different versions of ics and jb and ever since the first update a few months ago the reception/radio quality has been poor. It started when I flashed a non o2 firmware, I flashed a stock btu firmware. Since then I have tried various firmwares on various providers and always have the same problem. If I change my phone to gsm only the call quality is fantastic but as soon as I put to auto it sets to hsdpa and goes back to poor call quality, even if I have a full bar for reception. I have since changed the csc to btu on phone and flashed various firmwares again and I still have the problem. I cannot have a £500 phone and be forced to use a 2g signal!
If it was poor from day one I would blame o2 reception but I have lived in this house for 7 years and never had this with other phones, also as said this phone was great originally but after flashing various firmwares it's rubbish now. I am currently using the new o2 jb update released today (my phone csc is btu) I hoped this flash would resolve issue but it hasn't.
Hope this makes sense and hope anyone can give me any tips to resolve my problem! Current signal strength 89dBa 12asu and still poor.
Thanks in advance.
Click to expand...
Click to collapse
have you tried to flash a O2 modem? maybe it does the trick!
I have the exact same problem however I am on the 3 network. My phone was working perfectly, then I installed the latest 3 branded jellybean ROM, had the exact same problem as you reverted back to stock ICS and the problem is still there. Can you tell me is the bad quality call both ways or just one way? For me it can hear people perfectly well, however the receiving end there is very bad quality. Also my Internet is incredibly slow.
Mine is the other way round, who I speaking to can hear me clearly but it's terrible from my end.
I have used Odin to flash a whole o2 Rom by clicking the pda option but it made no difference. Doesn't matter what stock Rom I flash and change the csc and factory reinstall it won't go back to how it was originally. As mentioned I can resolve the problem by using 2g/gsm network but then using the internet is terribly slow. Should have left it alone!
Have you changed the CSC to both your Original O2 CSC and the BTU CSC? How is your internet speed while on 3G? mine is so slow, half the time it just displays the 'Page timed out' page
My phone was originally o2u csc on o2 firmware and was good.flashed a btu firmware and this made it bad reception so flashed back to o2 firmware and it was very poor still so I flashed back to the btu firmware and changed csc to btu but I still have bad call quality. I presume because I flashed a o2 firmware from sammobile it will be back to a o2 modem?
My 3g data is about 4mb down and 2mb up.
Can anyone help us?
My ping is over 1000 and my download rate is 740kb/s and upload is around 27kbs while on H+ clearly this is very bad. I've tried different radios to no avail.
Since flashing to the latest jb btu firmware my problem has gone!
Hi Just wondering if anyone else has been having this issue.
Phone was working absolutly fine untill the portico update popped up (uk ee). update completed fine and phone restarted.
But since then i have been losing my signal totally, mostly when the phone goes into standby.
The only way to get it back was to restart the phone. I then phoned nokia support who asked me to do a hard reset. My phone then got stuck on the spinning cogs. after a few attempts of trying to soft reset i managed to get the phone to work but still same issue.
so then i phoned ee shop who said they would try flashing latest firmware and if that fails then they will send it away to service centre or replace.
so i decided i'd try flash it myself first using navifirm. Which i did using latest firmware. but still no luck.
so then finally before i take it to store i thought i'd try downgrade firmware and guess what...so far (fingers crossed) still got signal.
dont know if its just my phone but its ceratinly not happy with either the portico update or one of the other updates nokia bundled with it.
just thought i'd share my findings incase anyone else was having this issue.
edit: have just tried flashing a cv gb 1004 portico firmware as i didnt want to miss out on the new features and touchwood all seems to be well so far and no signal drops.
Hey
Yeah same here, upgraded last night all went fine, but today the signal has been up and down like a yoyo, also the battery is almost out !!! normally I would still have 50% left at this time of day, I just checked and I have 22% not great at all.
maybe the upgrade altered some settings ?
I will keep an eye on this for a day or so I think......
Having the exact same problems updated last night. How do I go about flashing back
Same here with my unlocked 920 since the Portico update, so it's not just the EE network. Mind you being as I always get a choppy signal at points maybe I shouldn't be so quick to judge.
FIX
Hi guys I have a fix for this issue, drop the highest connection speed down in your settings from 4G to 3G
Problem solved
Maggot82 said:
Hi guys I have a fix for this issue, drop the highest connection speed down in your settings from 4G to 3G
Problem solved
Click to expand...
Click to collapse
thanks maggot82
im using the gb.cv.1004 rom now and i believe though this has the portico update it does not have the same issues. i can not see an option for 4g in the network settings so this maybe why.
though ill wait untill others confirm this fix before i flash back to ee.1017 rom.
richard1978 said:
Having the exact same problems updated last night. How do I go about flashing back
Click to expand...
Click to collapse
richard i used this guide:
http://forums.wpcentral.com/nokia-l...after-reset-flash-process-defined-inside.html
Signal issues (ee) since portico update Lumia 920
Thanks to Maggot82. Received portico update, signal then dropping in and out all over the place. Went into settings/network, changed the defaulted option from 4G as the highest connection speed to 3G and now 5 bars of signal and constant.
Worked for me and certainly a less hassle route to try first before thinking to flash different updates to your phone.
Good job, ta.
Maggot82 said:
Hi guys I have a fix for this issue, drop the highest connection speed down in your settings from 4G to 3G
Problem solved
Click to expand...
Click to collapse
I had already done this but this issue seems to have resolved itself anyway.
no trouble guys, your welcome.
My 920 came preinstalled with Portico and I had no problems the first week or so. Since last week I have had two occasions where the phone has either restarted or just reinitialized the radio because it asked for the SIM-pin when I took it out of my pocket. And the days after that I noticed a few occasions where the signal was lost altogether for a minute or so.
My phone was set to 3G max speed from the start.
So, are there some radio-related issues with the Portico ROM? And is it Nokia's firmware or Microsoft's WP8 code?
Noppes123 said:
My 920 came preinstalled with Portico and I had no problems the first week or so. Since last week I have had two occasions where the phone has either restarted or just reinitialized the radio because it asked for the SIM-pin when I took it out of my pocket. And the days after that I noticed a few occasions where the signal was lost altogether for a minute or so.
My phone was set to 3G max speed from the start.
So, are there some radio-related issues with the Portico ROM? And is it Nokia's firmware or Microsoft's WP8 code?
Click to expand...
Click to collapse
i think there are some issues with the certain portico firmware. i have reflashed to ee uk 1017 and changed the setting from max 4g to max 3g and that resolved the signal dropping issue (thanks maggot).
however i have noticed that the signal is not as good as the gb.cv.1004 rom. so i dont think its a portico issue, more so that it may be the carrier related firmware updates that are causing issues.
not sure if the update was a full update
My OS version number and Firmware number has not changed since portico! the OS version number that I have is 8.0.9903.10 and the Firmware Revision # is 1232.2110.1244.3011. I know for fact that the Portico's FW version is meant to be 1232.5951.1249.0001 or higher, depending on region/network etc.
My phone has your symptoms, i.e calls drop out and very poor reception at times, plus, heating up massively and subsequently maximum 5-6 hours of battery life!
I have given numerious feedbacks to Nokia, but I guess I have to just go down the route of taking it to them to fix/change! mine was originally from Phones4U in UK (Sim free, which I found out that was locked to EE!), £35 to unlock and now on TescoMobile.
Could you please state your OS and Firmware versions, so we know that we are talking about the same release?
amowolves said:
Hi Just wondering if anyone else has been having this issue.
Phone was working absolutly fine untill the portico update popped up (uk ee). update completed fine and phone restarted.
But since then i have been losing my signal totally, mostly when the phone goes into standby.
The only way to get it back was to restart the phone. I then phoned nokia support who asked me to do a hard reset. My phone then got stuck on the spinning cogs. after a few attempts of trying to soft reset i managed to get the phone to work but still same issue.
so then i phoned ee shop who said they would try flashing latest firmware and if that fails then they will send it away to service centre or replace.
so i decided i'd try flash it myself first using navifirm. Which i did using latest firmware. but still no luck.
so then finally before i take it to store i thought i'd try downgrade firmware and guess what...so far (fingers crossed) still got signal.
dont know if its just my phone but its ceratinly not happy with either the portico update or one of the other updates nokia bundled with it.
just thought i'd share my findings incase anyone else was having this issue.
edit: have just tried flashing a cv gb 1004 portico firmware as i didnt want to miss out on the new features and touchwood all seems to be well so far and no signal drops.
Click to expand...
Click to collapse
I also noticed the problem and thinking of restore to see if problem still exist
New firmware available 1232.5957.1308.1 on Nokia Care Suite,Navifirm,etc.
uiqjirka said:
New firmware available 1232.5957.1308.1 on Nokia Care Suite,Navifirm,etc.
Click to expand...
Click to collapse
Any change log for it, or something like that?
that's only for Denmark and Sweden (Beta)
i have installed the portico update...and now i have only gprs connection for internet...can someone help me pls?
have try 4g and 3g connection..always the same...not help me
Same Issue
hasbai said:
i have installed the portico update...and now i have only gprs connection for internet...can someone help me pls?
have try 4g and 3g connection..always the same...not help me
Click to expand...
Click to collapse
Hi, did you solve this matter? I just installed Portico and the same problem, only 2G is working...
Thanks,
JJ
And this friends is what happens when you can't leave well enough alone and have to go to something other than stock. If it is not broken the why fix it?
Hi, i'm using GT-I9505 In Bangladesh, IT is a TGY(Hong Kong) version. it was performing superb till 4.2.2. But with 4.3 update my 3g has gone to hell. call dropping, no 3g service, 3G sweetspots etc etc. Surprisingly 2g service is same as before. Is there any permanent solution or fix for this irritating problem? I've flashed Singapore ver. of 4.4.2 but problem still persists. And i'v tried to flash GSM / NON-HLOS - MODEM'S Collection. only thing left to do is send it to service and look for any break in antenna. A lil help here plz