Okay, I'm going to put everything on here for anyone to understand my problem and to maybe fix my problem hopefully. Well, I got my Samsung Galaxy Note, rooted it (went perfect), flashed a new rom (one of the ICS roms) then decided I wanted to try out the leaked ICS official build of the Samsung Galaxy Note rom. So I downloaded this:
http://rootzwiki.com/topic/22134-sgh-i717uclc5-ice-cream-sandwich/
and ran the file. I don't know why I was so dumb but I didn't wipe anything or whatever (ugh ) and from my ICS rom, I put it into download mode and just ran the file, thinking it would just go through. Well it keeps going half way and now I get an error message saying:
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again.
I don't know what to do next, have I bricked my Note or what?
Boot into Odin and flash a cwm (doesn't matter which one)
Reboot phone into cwm and connect USB cord to computer
Go to Mounts and storage > USB storage.
The phone will show up on your computer. Download and copy stock radio, or uclc5 to phone, as well as a 2.3.6 rom.
Unmount USB and go back to mounts and storage and format system 3x, then go back to main menu and do a factory reset 3x. Flash the radio first then from, and reboot
I have the same issue.
When I attempt to flash Clockworkmod Recovery Touch I get:
"Complete(Write) operation failed."
EDIT: Fixed it but can't remember how.
Related
Hi I hope someone can help me. I have searched this forum but could not find a similar situation to what I ended up in...
I tried to install a custom ROM on my Galaxy Tab 10.1 using the CWM/Odin.
This seemed succesful but was not, it did not start but was stuck in the Samsung logo.
So I tried entering the CWM and download and install an original Samsung ROM. I can get it into CWM, but CWM cannot enter the download mode only the other mode.
In this mode all options are available:
- reboot
- apply update from SD card
- wipe data/factory reset
- wipe cache partition
All options have been tried without any luck. In the update from SD card it only shows ...
or Error opening /data/media: no such file or directory
Any ideas how I could get this directory back or put a ROM on the Samsung in this situation.
Odin does see the Galaxy but as I cannot get it into Download mode I am unable to download anything to it.
All or any suggestions are very welcome!
1. CWM (Clockworkmod) =! Odin.
In the beginning, you don't have CWM installed. You install CWM, by flashing CWM on your Phone with odin.
Odin is the Windows Programm, that is used to flash Recoveries/ROM's/Kernels onto your device.
2. it seems, that you still have the default Samsung recovery installed, that meand CWM is not yet flashed on your device.
If the flashing process was succesful (I suppose it was done with odin), but you can't get past the Samsung logo, that means, you probably flashed a rom, that isn't made for your device(ex. a GTab 10.1v Rom).
If you DID flash a wrong rom, then you probably ****ed up the partition table and removed the Download Mode(Odin Mode). Strange thing is, that you still have the Stock recovery.
Could you please redirect us to the rom you downloaded?
Also, did you flash with a repartition on and/or a .pit file?
hi Kaukassus,
thanks for the reply.
OK I checked the files and what I did.
I think I totaly screwed this up. It was a theme I tried to install the AOSP_HC_v1.3_3G+KI1.
I rooted the Tab. So first when the Tab was still functioning installed it on the TAB via USB.
Than tried to install this via update from SD card.
This appeared to work initially. But hung at the start.
After that I tried (via Power Volume Up) wipe data/factory reset.
No luck.
After that I tried wipe cache partition followed by wipe data/factory reset.
And this is what I got now..
Bad news is the Tab was/is a X-mas present and I managed to screw it up even before I officially got it !-(
The valuable lesson you're learning is that you need to be aware exactly what things you're flashing and their compatibility with your device and the software it's running.
You haven't mentioned what specific device you're using or the specific things you've tried to flash (as kaukassus pointed out, direct links to threads where you got the files you tried to flash are best). Not sure if you're aware but not all GT 10.1's are equal; there are several models out there and each and every ROM is specific to a particular device. Verizon LTE GT 10.1's like mine can't take ROMs from any other device for example, it's likely that the new T-Mobile 4G one's wont be able to trade ROMs with Verizon ones . . you get the point.
When you say you installed via USB what exactly did you mean? If you simply copied a zip file via USB to the tab to flash in recovery mode that's not installing; the flashing from recovery may be but the file copy operation is not. If on the other hand you pushed things via ADB or you flash using Odin software then that's a different story.
Best thing to do at this point is to properly identify your device, look for a stock recovery image for Odin and flash that via Odin to your device. At that point you can start from scratch again to build what you want.
Thanks Muzzy996.
You are right. I was in a rush and should have taken more time.
However I am getting somewhere. Managed to get in download mode twice today, don't ask me how. This Tab just will not go into download mode!
However I did not have the stock ROM ready to be installed.
Will keep you updated.
i have the same problem. i just rooted my device was going to overclock. decided to save my rom with rom manager. saved it device went to reboot now the samsung galaxy 10.1 shows up screen goes dim then shuts off, and will cont. do this. i can get into download mode but recovery will not work. is there anyway to download my stock rom. im using verizion 4g 10.1 any help would be great, btw sorry to thread jack
Problem solved.
Managed to get it in download mode again and install stock rom via Odin.
Appeared to work fine. But kep switching off, even after full night of charging.
This morning Tab was dead after recharging whole night..
Got it back on by holding volume down and power button down.
i found a stock rom and im trying to upload it via odin, however odin does not find my tab? any ideas. btw congrats on getting ur tab back
I crashed both my I9000 (galaxy s) flashing custom roms and my tab 10.1 (editing some system files) both ended up just looping but managed to get both back. I purchased a small connector of ebay £1.59 that has just a resistor accross pins 4&5 331k I think anyway plugging this into most samsung devices boots them into download mode. Even before getting my resistor I managed to get things working I think that you'd have to be properly unlucky to really brick a samsung I've flashed both my devices with all sorts of crap with my little resistor I just reset them with ease.
Brian
h2bmess said:
i found a stock rom and im trying to upload it via odin, however odin does not find my tab? any ideas. btw congrats on getting ur tab back
Click to expand...
Click to collapse
did you ever resolve this issue? i am currently faced with the same issue.
Ok so i had ICS passion installed then one day the rom gave me an error telling me encryption unsuccessful. So i followed the instructions to fix it, by putting the partition on the micro sd card (8gb). I then decided to flash back to stock gingerbread with odin. I thought that if I put a galaxy s international rom on the US vibrant it would work, but i was wrong so dont try that. I was stuck on a bootloop and was able to get to download mode. Then i used Odin to flash JFD for vibrant it said i passed but when i booted it did the same. Now im on KB5 and it gave me android system recovery <3e> but i have an error dev/block/mmcblk0p1.
I cannot go to menu, i can access download mode and android system recovery, i also tried to install update zip but it gave me the signature fail.
Please help me back to stock firmware or any stable version. Thank You
Hi Everyone! just a rookie here in need of a bit of advice.
I'm a Galaxy S II I9100 owner and have my phone rooted and all setup with custom roms and been comfortable with flashing for some time now. My ROM of choice recently was Vanilla Rootbox and have to say the ROM has been fantastic with very few bugs to report. Last night i recieved the OTA update via Goo Manager for Vanilla Rootbox 3.4. I downloaded the full update over wifi and flashed with all wipes no worries. Next step was to flash the latest GAPPS and i figured there would be nothing wrong with flashing the GAPPS zip i had on my sd card that i had downloaded the last time i was notified of a GAPPS update via Goo manager as well. After flashing, wiping everything and rebooting again. My phone then booted up to a series of dialog boxes indicating that many google processes had stopped functioning. apps.google.com etc etc. A similar error has been reported in the Vanilla Rootbox thread by another user but i wasnt able to report this bug their either because my post count is too low to post in a development forum. So after seeing this error i rebooted into recovery to flash my last backup but CWM recovery came back with an error messaging stating it couldnt mount either ext or int sdcard. i did a factory reset which made no difference to the problem whatsoever. I then downloaded ODIN and the latest stock ICS Rom and flashed it via ODIN with no reported errors. My phone now boots through the optus boot animation and is stuck at the Galaxy S 2 screen with the flashing red and yellow animation over the S. If i turn off the phone with the power button, the phone turns off and immediately starts again and gets stuck at the flashing s screen. I've taken the battery sim and ext sd card out and put it all back in only for the problem to persist.
If anyone could help me there's a donation and my thanks in it!
Much appreciated
Nick
tried to re flash another stock ROM?
If so, tried factory reset the phone after the flash?
As long as you can get to DL mode, you are good to keep on flashing till you are up & running.
And then you got this
Remember to update your kies and make sure you close it all up before flashing with odin. If you are in 4.0.4 beware of the brick bug.
gastonw said:
tried to re flash another stock ROM?
If so, tried factory reset the phone after the flash?
As long as you can get to DL mode, you are good to keep on flashing till you are up & running.
And then you got this
Remember to update your kies and make sure you close it all up before flashing with odin. If you are in 4.0.4 beware of the brick bug.
Click to expand...
Click to collapse
Kies has never been installed on this computer but i did use the usb drivers mentioned in the soft brick recovery guide you linked. I used some information from the guide to flash this stock rom but i couldnt flash or wipe the partition because im unsure where to get the .PIT file required? i cant get past the boot animation so no factory reset possible and yes i can still get into download mode!
darkstar117 said:
Kies has never been installed on this computer but i did use the usb drivers mentioned in the soft brick recovery guide you linked. I used some information from the guide to flash this stock rom but i couldnt flash or wipe the partition because im unsure where to get the .PIT file required? i cant get past the boot animation so no factory reset possible and yes i can still get into download mode!
Click to expand...
Click to collapse
wow wow, leave pit files alone for now, they are nasty.
What stock ROM did you flash? 4.0.4 or 4.0.3?
You can factory reset via recovery mode.
Try installing kies anyway, it can't never hurt. Just make sure all applications are closed before you re-flash.
here's jb leak, might help:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
Right so i flashed I9100XWLP8 stock rom (4.0.3). Just then i flashed Siyah Kernel and attempted to use the factory reset function in recovery there, i get a message down the bottom mentioning that it can't mount my internal SD.
darkstar117 said:
Right so i flashed I9100XWLP8 stock rom (4.0.3). Just then i flashed Siyah Kernel and attempted to use the factory reset function in recovery there, i get a message down the bottom mentioning that it can't mount my internal SD.
Click to expand...
Click to collapse
Tell me your:
Model
Firmware
Country
Carrier
Always mention this
try flashing jb leak (ROM, modem & kernel package).
This is my first time rooting my device and all that, I'm still a noob and forever will be.
anyway I followed the normal steps where you download Odin and everything went fine and my phone was still working now I had to update the CWM version to 6.0.4 or something so I downloaded the Kit-Kat compatible zip file and upgraded the version to what I wanted it to be.
Now I read in one of the steps that I need to backup my files and so I did but now I can't recover it and my phone doesn't turn on I'm stuck in CWM I can still see my files on the phone and when I restore it does name the files I already had but my phone does not work just goes black ...so either CWM or a black screen.
My PC does not recognize the phone, Kies doesn't either.
Did I nuke my phone?
Xyloto said:
This is my first time rooting my device and all that, I'm still a noob and forever will be.
anyway I followed the normal steps where you download Odin and everything went fine and my phone was still working now I had to update the CWM version to 6.0.4 or something so I downloaded the Kit-Kat compatible zip file and upgraded the version to what I wanted it to be.
Now I read in one of the steps that I need to backup my files and so I did but now I can't recover it and my phone doesn't turn on I'm stuck in CWM I can still see my files on the phone and when I restore it does name the files I already had but my phone does not work just goes black ...so either CWM or a black screen.
My PC does not recognize the phone, Kies doesn't either.
Did I nuke my phone?
Click to expand...
Click to collapse
i can't understand: are you able to access CWM (using the three button combination) or you can't even turn on your phone?
If you can access CWM, go in "mounts and storage" and select "mount USB storage", then connect your phone to the computer and see if it is recognized
1265 9885948
Never mind, I figured it out, thanks anyway
Hi all,
I am in the same situation, but can't figure it out.... I wanted to upgrade to Kitkat so I downloaded Supernexus 4.0 but the install from zip fails everytime I attempt it.. So I'm stuck in the CWM and I don't have a backup ROM to install...
I checked the md5 sum of the ROM, it's ok.
I wipe the /data partition, the cache and the dalvik cache before installing from zip..
I installed the last CWM version (v6.0.4.5).
I don't know what to do next because the only ROM I have in my phone is the supernexus 4.0 which cannot be installed and I cannot mount my phone using "mount USB storage" in CWM, my PC doesn't see the phone mass storage..
Any idea ?
Thanks,
Hervé
delh01 said:
Hi all,
I am in the same situation, but can't figure it out.... I wanted to upgrade to Kitkat so I downloaded Supernexus 4.0 but the install from zip fails everytime I attempt it.. So I'm stuck in the CWM and I don't have a backup ROM to install...
I checked the md5 sum of the ROM, it's ok.
I wipe the /data partition, the cache and the dalvik cache before installing from zip..
I installed the last CWM version (v6.0.4.5).
I don't know what to do next because the only ROM I have in my phone is the supernexus 4.0 which cannot be installed and I cannot mount my phone using "mount USB storage" in CWM, my PC doesn't see the phone mass storage..
Any idea ?
Thanks,
Hervé
Click to expand...
Click to collapse
Always keep a working kernel/rom .zip in you internal memory so if you are stuck you don't need to use Odin!
Try to use another USB port or another computer to see if it is recognized, or if you have a MicroSD load a rom on that and insert it in your phone.
if not, you have to use Odin and flash a kernel or rom using the pc.
Hey guys! I had recently installed an Android 4.5 rom on my Samsung Galaxy S i9000, but I didn't really like it, so I went back to clockwork mode and restored the backup (which I am pretty sure I had saved prior to installing the rom). What happened then was that I couldn't power on my device. It literally gets stuck on the Samsung Galaxy I9000 startup screen. I can however access download mode and I can access clockword mode recovery. BUT, when I try to install another update with clockword mode recovery or trying anything on cwmr for that matter (factory reset, cache reset, anything...), I get the error message: Unknown path to /sdcard and I am stuck at this. Can anyone tell me how to fix this issue? Please, I need help quickly!
I would just restore with official firmware via Odin and restart the process. This will set everything back right so you can have a fresh start. http://forum.xda-developers.com/showthread.php?t=1102881