Device :
HTC EVO 3D CDMA
HW 02
HBoot 1.40
ROM 1.13 Stock
Chronolog :
- Im on Hboot 1.40 S-Off
- In some reason im planning to S-On my device
- So i flash RUU 1.13.exe
- After Done with flashing, i entering fastboot mode to enter S-On Command ( "fastboot oem writesecureflag 3" ) source
- Done with S-On im back to S-Off and flash Custom recovery
- AND Accidently i enter S-On Command again ( "fastboot oem writesecureflag 3" )
- Its Bricked ( LED still on but very dimmed, wont boot at all, adb can't find the device/no respond )
Solution :
- I flashed emmc_recovery and hboot from linux ( i use ubuntu 11.x ), this method i got from unknownforce Downgrade Hboot Method
- The diffrence was my baterry still pop in My Evo.
- Every step ive succes message with different output number.
I Make this thread just wanna share my experience, maybe other people need it someday.
Thank you very much for sharing this dimqs153. This should come in very handy. Just curious, who is your carrier (cell phone service provider)?
~co~
closeone said:
Thank you very much for sharing this dimqs153. This should come in very handy. Just curious, who is your carrier (cell phone service provider)?
~co~
Click to expand...
Click to collapse
im in indonesia n i use smartfren provider with sprint device
Related
I tried searching around for information unlocking the bootloader ver 1.50 on my EVO 3D but it doesn't get to the screen where it shows the disclaimer if you want to unlock the boot loader or not. I am on HBOOT 1.50 and the software version is 2.17.651.5 and android 2.3.4. I followed the method on HTCDEV dot COM and also read somewhere it works with software version 2.08 and LATER.
So basically while the phone is in FASTBOOT USB and I use the "fastboot flash unlocktoken Unlock_code.bin" code in the command prompt it just stays on the FASTBOOT USB screen and doesn't pull up the disclaimer. Anyone have what may be wrong?
Thanks
http://forum.xda-developers.com/showthread.php?t=1239821
Follow those directions and you wont have an issue.
did you cd to the right directory in command line?
Was having this same damn problem..just got an EVO 3D yesterday and wouldn't get past the unlock code part..so just run the 2.08 RUU and I'm good to go?
Sent from my PG86100 using XDA App
alexv305 said:
I tried searching around for information unlocking the bootloader ver 1.50 on my EVO 3D but it doesn't get to the screen where it shows the disclaimer if you want to unlock the boot loader or not. I am on HBOOT 1.50 and the software version is 2.17.651.5 and android 2.3.4. I followed the method on HTCDEV dot COM and also read somewhere it works with software version 2.08 and LATER.
So basically while the phone is in FASTBOOT USB and I use the "fastboot flash unlocktoken Unlock_code.bin" code in the command prompt it just stays on the FASTBOOT USB screen and doesn't pull up the disclaimer. Anyone have what may be wrong?
Thanks
Click to expand...
Click to collapse
You can check Setting>Power>Fast boot being ticked? If so un-tick.
This messed me up once ...
majid25 said:
Was having this same damn problem..just got an EVO 3D yesterday and wouldn't get past the unlock code part..so just run the 2.08 RUU and I'm good to go?
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
I have a brand new, three day old 3devo. It came with 2.08 and Hboot 1.5. I did the OTA update to 2.17.
Mine wouldn't let me "drop back" to 2.08. I had to re-install 2.17 over the "OTA" update that was on my phone using the RUU 2.17 executable
Once I reinstalled 2.17, I was able to get a new unlock code from HTC and everything went through like it should.
i have an evo 3d with hboot 1.50. i currently have the latest miui rom. what do i all need to put my evo 3d back to completely stock?
you need to boot into fastboot and type in the command
fastboot oem lock
it should now not boot, have a security warning, and be "relocked"
now run an ruu.
you'll still be relocked but that's as good as i can get u unless you downgrade hboots.
dkdude36 said:
you need to boot into fastboot and type in the command
fastboot oem lock
it should now not boot, have a security warning, and be "relocked"
now run an ruu.
you'll still be relocked but that's as good as i can get u unless you downgrade hboots.
Click to expand...
Click to collapse
Fastboot boot recovery.img and wipe just not your SD card... Now go back to hboot and do what he said
hello everyone
I recently installed KingCobra3D ICS 1.2 ROM on my EVO 3D, and it was running well until all of a sudden it started having many issues of turning off while the screen is sleeping (it wont turn back on until I do a battery pull), rebooting, and wont turn on until I do multiple battery pulls. First I thought it was the kernel, so I reflashed the kernel along with the ROM many times, and it still does those issues. My question is, how dp I go back to the original stock Gingerbread firmware without relocking the bootloader? I flashed the ICS ROM, not firmware.
EDIT: I tried restoring my backup from the recovery, but the phone didn't boot after that
any help is greatly appreciated. thanks
extra helpful info:
ROGERS HTC Evo 3D
GSM, Carrier Unlocked
unlocked bootloader via HTCDev method, S-ON, H-BOOT-1.49.0008
madmajd said:
hello everyone
I recently installed KingCobra3D ICS 1.2 ROM on my EVO 3D, and it was running well until all of a sudden it started having many issues of turning off while the screen is sleeping (it wont turn back on until I do a battery pull), rebooting, and wont turn on until I do multiple battery pulls. First I thought it was the kernel, so I reflashed the kernel along with the ROM many times, and it still does those issues. My question is, how dp I go back to the original stock Gingerbread firmware without relocking the bootloader? I flashed the ICS ROM, not firmware.
EDIT: I tried restoring my backup from the recovery, but the phone didn't boot after that
any help is greatly appreciated. thanks
extra helpful info:
ROGERS HTC Evo 3D
GSM, Carrier Unlocked
unlocked bootloader via HTCDev method, S-ON, H-BOOT-1.49.0008
Click to expand...
Click to collapse
Hello madmajd,
S-ON as your phone is you can not flash boot.img(kernel) from the recovery.
Extract boot.img from your gingerbread rom.zip and flash-it from fastboot
Code:
fastboot flash boot boot.img
reboot in recovery, do a full wipe
and flash your rom
sincerely,
fxjumper said:
Hello madmajd,
S-ON as your phone is you can not flash boot.img(kernel) from the recovery.
Extract boot.img from your gingerbread rom.zip and flash-it from fastboot
Code:
fastboot flash boot boot.img
reboot in recovery, do a full wipe
and flash your rom
sincerely,
Click to expand...
Click to collapse
While its true YOU CAN flash the kernel that way its not needed with HTC Unlock...
If u enter your recovery via fastboot command prompt ( fastboot boot your recoveryfilename.img), roms And KERNELS WILL flash like normal from the recovery. Here's some extra info I pm'd to another gsm user...
mpgrimm2 said:
Some key points:
- The ICS /ICS Leaked roms (3.6/4.0) typically have trouble booting the stock kernel on several HTC Unlocked phones. This doesn't seem to occur on S-off phones. (Boot loops are usually a sign of a kernel issue).
- I am on a Sprint CDMA EVO3D & have no idea how to s-off your gsm version/downgrade the bootloader.
- I do have an HTC Unlocked guide in my signature that covers many of the basics for the CDMA version. It's the same process/steps for gsm, but the files used need to be gsm specific from the gsm threads (recovery, kernel, roms, etc).
- If u decide to run an Ruu (exe or zip), you must be locked/relocked & run the same or higher firmware version as currently installed. The exe will work with the phone booted to android or with the bootloader in "fastboot usb". The zip must be renamed exactly PG86IMG.zip and put directly on the root of the sdcard & boot into the bootloader.
- If the phone boots to the bootloader, you can use fastboot command prompt to " unlock" the phone again with your unlock code. Then fastboot flash the recovery again (4ext or Cwm 4.0.1.4 gsm versions recommended), then fastboot boot the recovery, run a superwipe (or format system, data & cache), & flash a gingerbread Rom or one of your nand backups.
- The correct HTC unlocked flashing process (ICS or GB) is to enter recovery via fastboot command prompt, format/superwipe, & flash the Rom (and/or kernel) as you normally would. (4ext Recovery is a solid workaround to using fastboot commands)
Click to expand...
Click to collapse
Sent from my PG86100 using Tapatalk
Sprint HTC EVO 3D
Unlocked
Shooter XC SHIP S-ON RL
HBOOT 1.50.0000
cMMC-boot
Recovery - TWRP 1.1.1
Stuck in bootloop. How do I fix?
wbpo5l said:
Sprint HTC EVO 3D
Unlocked
Shooter XC SHIP S-ON RL
HBOOT 1.50.0000
cMMC-boot
Recovery - TWRP 1.1.1
Stuck in bootloop. How do I fix?
Click to expand...
Click to collapse
Doing what?
You might want to consider upgrading your firmware and getting S-OFF status. I have a guide here that can help.
ramjet73
Too late!
Ok so I followed someone's note to me that said I needed to relock the phone first. So following the instructions for relocking I did the "fastboot oem lock" and now I am "Relocked" but the phone only boots now to Bootloader/Fastboot.
What do I do now?
All I really want to do at this point is get the phone back working. I don't care about root as this phone is going to someone else.
Thanks
wbpo5l said:
What do I do now?
All I really want to do at this point is get the phone back working. I don't care about root as this phone is going to someone else.
Thanks
Click to expand...
Click to collapse
Just do step1 of the guide I linked in my previous post and you will be back to stock.
ramjet73
wbpo5l said:
Sprint HTC EVO 3D
Unlocked
Shooter XC SHIP S-ON RL
HBOOT 1.50.0000
cMMC-boot
Recovery - TWRP 1.1.1
Stuck in bootloop. How do I fix?
Click to expand...
Click to collapse
Hi
I think you need to downgrade to HBOOT 1.49.007 Because versions 1.50.00 and above have a restart issue with custom ROMS
The bad new is that you must spend your HTC EVO 3D S-OFF
I followed this thread to downgrade
http://forum.xda-developers.com/showthread.php?t=17434661
Follow this thread to return to 1.49.007 version of hboot
http://forum.xda-developers.com/showthread.php?t=1906172
If you really want to s-on your phone after this downgrade, you can enter
fastboot oem writesecureflag 3
in fastboot mode, but i don't recommend it
Pay attention to these manipulations and does not hesitate to completely read all the tutorials and all comments.
goodbye,
fxjumper said:
Hi
I think you need to downgrade to HBOOT 1.49.007 Because versions 1.50.00 and above have a restart issue with custom ROMS
The bad new is that you must spend your HTC EVO 3D S-OFF
Click to expand...
Click to collapse
I know he didn't say that, but I think the hboot 1.5 indicates that he has a CDMA model.
ramjet73
Thank you
ramjet73 said:
I know he didn't say that, but I think the hboot 1.5 indicates that he has a CDMA model.
ramjet73
Click to expand...
Click to collapse
ok
Thank you everyone for your help.
Was able to re-lock it and find and install through the correct RUU.exe.
Now my wife has a phone again.
So, there is the situation -
I have got a HTC Evo 3D (GSM) European version i guess, becuase on the box it says "This equipment may be operated in: AT BE .... DK EE FR DE GR...." basicly its European
So to the problem,
I Need to revert it back to Stock, I mean everything, because im going to give it away and the person needs it stock like just from the shop, no root, no S-OFF no bootlocker unlocked, so my Question is - what i have to do? and before you spam me - check the tuts, search the forums, i have done that but i didnt get a good hang of it so i want real person to person explaining me stuff, so i dont brick it or anything.
Some info on phone :
Bootlaoder unlocked with HTC method,
-Revolutionary- shows up in bootloader
S-OFF
HBOOT-1.49.1107
RADIO-11.25.3504.06_M
ROM-ICS NonSense 4.0 or one version older (i dont remeber, but i think its not a big of difference) http://forum.xda-developers.com/showthread.php?t=1507616
Kernel-Buttered Toast ICS​
Anyone please?
First of all do u have original official ICS ruu rom? At this moment its so hard to download that.
Sent from my HTC EVO 3D X515m using xda app-developers app
Simple.
download RUU or PG86IMG.zip (Make sure its the correct one for your device)
Once the update has been applied and your phone reboots go into bootloader, enter fastboot usb then in cmd type in "fastboot oem lock" without the ""
Your phone should now be back to 100% stock.
Thanks but i dont have an original RUU, any hints where can i get and how do i know its right for my device, what do i look for?
P.S. ok i think i got the RUU i guess this will do? RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed.exe
anyway should i just execute and install it or i need to pull the rom.zip or something out of it and flash that? btw i want the stock kernel too.
P.S.S. and i hear that fasboot oem lock will do only the re-locked thing on the bootloader, is there any chance to get it locked?
P.S.S.S. and what about S-OFF will locking make it S-ON,
sorry im on deadline here :/
1.folow steps from here http://forum.xda-developers.com/showthread.php?t=1906172
When u are done your bootloader will be locked with 1.49.0008 hboot and s-off
2.Run on pc your official ics rom and folow steps
When u are done yor bootloader will be locked with 1.53.xxxx hboot and s-off (with official ics rom)
3.in adb type "fastboot oem writesecureflag 3" to gain staus s-on.
Completly stock now
Sent from my HTC EVO 3D X515m using xda app-developers app
Do my simple steps.
Ru. The ruu. Once it finishes your phone will reboot go into bootloader & type the command
Because you are s-off it will show as locked & not relocked
You're welcome.
Ok i'm now on Stock Rom from installing stock RUU im HBOOT-1.53.0007 S-ON but Relocked, is there any chance to get it Locked?
[Q] Evo 3D that hates me!!! ROOT s-OFF and unlock bootloader cant select yes
Hi all, im a newbie to android rooting etc, so please be patient if I dont understand... XD
I will try to give a backround with a very detailed discription for those who might have the same problem, a similar problem or for those trying to help...
so I bought this beast in Feb with stock software on: this was my 1st root, s-off attempt :
http://forum.xda-developers.com/showthread.php?t=2130585
1st attempt quote from post
Hi there,
Developers, gonna be developers and android noobs
I got a small issue with mu EVO 3d GSM...
Firstly Id like to apologize if this has been asked...
Problem: I need to get past BOOTLOADER BLOCK !!!
Before you carry on reading -
Bought this phone online, from China, Original HTC!!! but with 1 or 2 chinese apps installed, Android 2.3.4...
This was standard when I first entered bootloader (out of the box)
***LOCKED***
SHOOTER_U PVT SHIP S-OFF RH
HBOOT-1.49.0012
RADIO-10.13.9020.08_2M
eMMC-boot
What is suprising is it needed to say Locked and s-on...
So I wanted to root and s-off...
Tried Revolutionary... Everything ran well, after 2nd reboot into bootloader, error - Communications between phone and PC has been interrupted
After that I retried and it said - 'Your device is already s-off' then it wanted to download and install CWM Recovery 4.0.142 Revolutionary...
HTCDEV - Step 13 didnt happen, it just stayed on the normal bootloader screen (in Fastboot USB)
Flashed a earlier version of HBOOT (1.49.007) before Revolutionary ROOT method(revolutionary didnt support HBOOT 1.49.0012), i noticed everytime i 'completed' revolutionary method with error, my HBOOT changed to 1.49.1107 for some reason, IDK
Now my bootloader setup is:
***Revolutionary***
SHOOTER_U PVT SHIP S-OFF RH
HBOOT-1.49.1107
RADIO-10.13.9020.08_2M
eMMC-boot
In CWM Recovery - I flashed SU.zip, it removed /bin and /xbin, and wanted to start copying or rooting file and then showed an error msg 'installation aborted', booted into ROM and SU app requested SU access???
BTW... downloaded and tried 3 RUU's all 3 for 3d of course and all 3 gave the same error - MODEL ID ERROR (i need the correct model) and in fastboot...
Use same Rev code : fastboot flash unlocktoken Unlcok_code.bin
Half the time it is done successfully but with no disclaimer screen (stays on fastboot) and changes hboot to 1107
OR
Gives error (Remote : Partition no avaiblable) or (Remote : not allowed)
Try fastboot oem lock, Doesnt lock and same result as mentioned above and every now and then it says loading custom splash sceen failed, htc disclaimer screen???
If anyone has had this problem or similar, please help, I would really appreciate it
Thnks in advance!!!
END
Now, Ive got a similar problem,
HBoot
1.58.5858 Jpbear
Unlocked
So I flashed the RUU_Shooter_U_TWM_TW_1.23.921.5_Radio_10.55.9020.00_10.13.9020.29_M_release_207920_signed.exe, it was the closest I could find with HBoot 1.49.0012 and gb 2.3.4...
Okay, np it flashed it with no problems... but little did I know, I lost root, bootloader relocked with disclaimer screen and lost s-off... Im buggered
So after messing around including almost bricking my phone, flashing new hboots, trying htcdev unlock with rogers, EMEA and sprint, no luck...
The only result is it showing the disclaimer screen (as mentioned in 1st boot attempt) that i cant select yes...
I tried flashing recovery, however when I flash recovery, it either hangs with HTC screen for a min or two then reboots or just hangs there forever...
Somewhere along the line I tried booting into Android and it jut boot in fastboot, for some unknown reason it also didnt pickup the PG86IMG.zip file I had on, it actually didnt pickup and PG86IMG files???
I also came across writesecureflag 3 in fastboot, gave it a try and it gave me a ***security warning***...
After that, I coud flash a PG86IMG but when I tried the htcdev unlock, I select ye, no response, removed battery and it said ***unlocked***, but when I flash a recovery, it flashes recovery in cmd but cant boot into it or it just doesnt flash onto the phone???
Somehow in between all of this I could get past the "yes" in unlock bootloader which was pure luck of the joy of the moment made me forget what I did before, I also tried flashing these RUU's
RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed
RUU_SHOOTER_U_ICS_35_S_Rogers_WWE_3.28.631.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262715_signed(1)
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_264110_signed
When booted in TWN-TW RUU, I could install Rom manager and flash CWM through that but through fastboot, it didnt boot through it
fastboot flash recovery recovery.img
fastboot boot recovery.img
RESULT: hangs on htc screen for a min or 2 then reboot into OS
Now im currrently on Asia ICS, hboot jbear 1.58.5858, htc recovery...
And in want of root, s-off, and most important able to Unlock Bootloader by selecting yes with a response,
please ANY help would be of use
thnx in advance
Its not much but will have a small paypal reward for those who helped (btw it will prob help others aswel)
[TAGS] : root issue, s-off problem, unlock bootloader cant select yes, evo 3d hboot not detecting PG86IMG, evo 3d bootloop
wow, you got a used or refurbished 3d which was already s-off. if you had posted before doing anything ,all you needed to do was flash a recovery and flash su zip. When you have s-off with custom hboot, like you had, you cannot unlock through htcdev and you don't have to. S-off with custom hboot means you can already flash any hboot ,recovery,Rom ,kernel or any mods.
You never needed HTC dev unlock.
you said.you are s-on with jbear.hboot? I.don't think.that's possible ,.check again if it's s-off or s-on . If it's s-on then it cannot be jbear.
You never lost s-off when you ran the RUU, you lost s-off by running the write secureflag command . It was your luck you were on stock.hboot , if you were on custom one,your evo 3d was dead for sure. Now flash the RUU that is made for your phone. then follow instructions from unlimited.io or ramjet73's thread , flash recovery then su zip. If you want another Rom you can directly flash that Rom without su.
Again, you never needed the htcdev. But now you will need it for the wire trick.
Thnx for responding, u made my day xD
mnomaanw said:
wow, you got a used or refurbished 3d which was already s-off. if you had posted before doing anything ,all you needed to do was flash a recovery and flash su zip. When you have s-off with custom hboot, like you had, you cannot unlock through htcdev and you don't have to. S-off with custom hboot means you can already flash any hboot ,recovery,Rom ,kernel or any mods.
You never needed HTC dev unlock.
you said.you are s-on with jbear.hboot? I.don't think.that's possible ,.check again if it's s-off or s-on . If it's s-on then it cannot be jbear.
You never lost s-off when you ran the RUU, you lost s-off by running the write secureflag command . It was your luck you were on stock.hboot , if you were on custom one,your evo 3d was dead for sure. Now flash the RUU that is made for your phone. then follow instructions from unlimited.io or ramjet73's thread , flash recovery then su zip. If you want another Rom you can directly flash that Rom without su.
Again, you never needed the htcdev. But now you will need it for the wire trick.
Click to expand...
Click to collapse
So, okay, I messed around abit more, not as if I could do any further damage besides bricking LOL
So this is my position and will leave it till next response...
***Relocked*** (can unlock, relock np because of s-on, if s-off, I cant, it just hangs after selecting yes, no response)
HBoot 1.49.0012
I have fastboot and OS access,
cant flash recovery or zip, etc, can change cid
Hboot doesnt read PG86IMG.zip files at all,
Goes through PG86... list, hangs 2 sec on PG86IMG.zip, says checking or parsing PG86IMG.zip for less than a sec then 'cancels', goes to hboot screen
Rev tool does not work
1st attempt - (1st line)Zerging root...
result- Cannot aquire root
for 2nd consecutive to 3,4,5,etc attempt
- goes to 2nd line in rev tool,
result gives error Communications with phone stopped,
When flashing recovery, it flashes perfectly, when fastboot boot recovery.img or hboot>recovery, hangs for a while then reboots
So flashing files through fastboot is a no go (generally gives error > remote:not allowed)
Thus conclusion, im considering the downgrade/unbrick method but It doesnt pickup and PG86IMG files (check exact speeling p.s. have done this alot)
I did a day ago aquire root, 4ext recovery but wanted unlock boot loader, so s-on, the only way to unlock, then got myself to this delema, stupid I know :silly:
So if you have any tricks up your sleeve, let me know please and thnx