[Q] Dell Streak 5 Stuck At Dell Logo - Streak 5 Q&A, Help & Troubleshooting

Hi everybody, please help! (Sorry for my bad English)
-I have a Dell Streak 5 (Unlocked Version) installed Android 2.2 from Dell.
-I tried to upgrade to Gingerbread 2.3.3 using fastbook. Everything work fine, and then I tried to Root my device, Streak working fine even I turn off and turn it back on.
-After a week, the Dell cannot connect to the internet due to Network Connection error. I tried to turn it off and then it stuck at Dell logo when I turn it on.
I spent over 10 hours to fix it but it still stuck at Dell logo.
-Please give me your advice (Include steps are perfect) any advices will be appreciated.
*What I tried*
1. Installed Dell Drive ( Windows 7 recognize my Dell Streak via Fastboot)
2. Tried Retail ROM 360 and 407 with suitable recovery downloaded from here http://forum.xda-developers.com/wiki/Dell_Streak_5
3. Tried Custom ROM
Longhorn 2.1V2
Longhorn 2.1v1
Longhorn 2.2v4
Longhorn 2.7_Red
All are from http://forum.xda-developers.com/wiki/Dell_Streak_5/ROMs
And Custom Rom 407 (Don't remember where I downloaded this firmware)
*When select update.zip (Custom Rom) it take approximate 5 minutes to display a confirmation. After I accept the Rom installed, a new line say installed complete, but the Dell still stuck at Dell logo. I do not know what recovery version suite with those custom ROM above so I download the two latest version and tried them all (Recovery 3.27 and 3.28beta)
*When select update.pkg, it does not show me anything except the black screen with light (I mean it look like a screen with Dell logo but there is no Dell logo in this case)
*One more problem, the Dell won't charge, I plug it to USB port but some time it display 0% battery and turn off automatically.
Addition Information:
Modem version = GAUSB1A1136000
OS Version = GBUSB1A134700
Battery Charge Disabled (Do not know how to turn it on in fastboot)
Charge-State 1%0%, (While I am look at it now it raised to 3%0%)
Thanks.

did you do factory reset (dell) and wipe ?

I followed these step below.
How to Flash with a COMPLETE wipe
1.) Download zip file to SD card
2.) Reboot in Streakmod Recovery
3.) Make Nandroid Backup - I skip this step because nothing to backup
4.) After backup, install Longhorn_2.X.zip
5.) Perform wipe data/factory reset from SM Recovery (blue letters)
6.) Reboot and perform a Dell Factory Reset (white letters)
7.) Phone will reboot. First boot can/will take a few minutes.
Sources: http://forum.xda-developers.com/showthread.php?t=1355878
I am doing those steps above again.
1. update.zip file is on SD card now.
2. Press and hold Camera and Power button until "white screen" appear and select fastboot
3. Run those command in CMD
fastboot -i 0x413c flash recovery recovery.img
fastboot -i 0x413c reboot
[recovery.img is a custom recovery latest version 0.3.2.8 beta]
Press and hold "UP" and "Down" volume keys after reboot command line.
3A. Select update.pkg (Dell recovery) after a couple seconds the screen change to Custom recovery screen.
3B. Select custom update.zip
4. After finish the screen say
" Mounting system!
Extracting Packages
I'm Still Extracting!
Symlinking Files
Setting Permissions!
Extracting Boot Image!
Done!
Now do a wipe data/Factory Reset and Dell Format!
Install from sdcard complete."
5. I press "Arrow button" to go back to custom recovery screen and select "Wipe data/factory reset"
After "Wipe data/factory reset", the screen say
"Error mounting /data/!
Skipping format... ( Is this normal? )
..... There are some line say Cannot mount... and Invalid Argument.....
Data Wipe complete
..... There are some line say Cannot mount... and Invalid Argument....."
6. After "Wipe data/factory reset" I select "Reboot system Now"
7. Press and Hold "Up" and "Down" volume keys while system boot up.
8. Select "Factory Reset" (Dell Recovery)
--- The Dell Reboot and Stuck at Dell logo, 3 keys sometime flashing---
Am I doing a right way?
While Dell stuck at Dell the computer can recognize Dell Streak.
Thanks for responding.

I thinc your sd card has problems, and i mean the internel one.

But I used to upgrade from 2.2 to 2.3.3 successfully last week.

dragon061088 said:
Hi everybody, please help! (Sorry for my bad English)
-I
-After a week, the Dell cannot connect to the internet due to Network Connection error. I tried to turn it off and then it stuck at Dell logo when I turn it on.
I spent over 10 hours to fix it but it still stuck at Dell logo.
Thanks.
Click to expand...
Click to collapse
Seems to me that something happend to the internal sd card, could be that there are some bad sectors on the card.
Everything that you did is ok. That's why i thinc is the card.

I did a "SD & SIM Test" on fastboot, it seem Internal Card and External Card work well.
Internal SD
Card Size 1903Mbytes
DMC/Datatest: Pass
By the way, do I need to insert SIM card in?

Flash a stock recovery.img and then flash a stock ROM
Sent from my cm_tenderloin using Tapatalk 2

I'm flashing factory recovery.img Version 360 and factory update.pkg Version 360.
Downloaded from here http://forum.xda-developers.com/wiki/Dell_Streak_5
----------------------------------------------
Android system recovery utility - GAUSB1A136000
After the task complete, the Streak reboot and being stuck at Dell logo.
What I can see right now is Three button come with light (Not flashing like other versions)
I will wait for 30 minutes....

Still stuck at Dell logo after 30minutes, I tried to remove the battery and turn it back on. So far, still being stuck at Dell logo.

dragon061088 said:
Still stuck at Dell logo after 30minutes, I tried to remove the battery and turn it back on. So far, still being stuck at Dell logo.
Click to expand...
Click to collapse
Flash the amss and DSP1 files for the 360 in fastboot
Boot into recovery and flash the update package again
If you do that and it still won't boot and the qdl tool won't work either then you definitely have an issue at least with the inner SD
Sent from my cm_tenderloin using Tapatalk 2

Thanks for responding,
I tried to flash recovery.img, amss and DSP1 (360)
fastboot -i 0x413c flash recovery recovery.img
fastboot -i 0x413c flash amss amss.mbn
fastboot -i 0x413c flash dsp1 dsp1.mbn
fastboot -i 0x413c reboot
However, Dell cannot go through Dell logo so I cannot move on...
I do not know how to use "QDL", I am using "fastboot"
By the way, I am using Windows 7 64bit, do I need a "special" driver? so far, my computer can recognize the Dell.
Thanks

Have you tried this MultiRecoveryFlasher v0.8
And download what you need from here Mirror

dragon061088 said:
Thanks for responding,
I tried to flash recovery.img, amss and DSP1 (360)
fastboot -i 0x413c flash recovery recovery.img
fastboot -i 0x413c flash amss amss.mbn
fastboot -i 0x413c flash dsp1 dsp1.mbn
fastboot -i 0x413c reboot
However, Dell cannot go through Dell logo so I cannot move on...
I do not know how to use "QDL", I am using "fastboot"
By the way, I am using Windows 7 64bit, do I need a "special" driver? so far, my computer can recognize the Dell.
Thanks
Click to expand...
Click to collapse
Download the 360 update.pkg again and put it on your SD card and flash again
Sent from my cm_tenderloin using Tapatalk 2

I tried MultiRecoveryFlasher v0.8 but this tool does not support 360.
And got an error "cannot find C:\Dell"
<Maybe I don't know how to use this tool>
------------------------
I tried to download 360 update.pkg and 360 recovery.img from here http://mirror2.streakdroid.com/manii/360/
It took awhile to confirm "update" (After select update.pkg, I have to wait for approximate 5 minutes) After that, the Dell reboot and stuck at Dell logo.

dragon061088 said:
I tried MultiRecoveryFlasher v0.8 but this tool does not support 360.
And got an error "cannot find C:\Dell"
<Maybe I don't know how to use this tool>
------------------------
I tried to download 360 update.pkg and 360 recovery.img from here http://mirror2.streakdroid.com/manii/360/
It took awhile to confirm "update" (After select update.pkg, I have to wait for approximate 5 minutes) After that, the Dell reboot and stuck at Dell logo.
Click to expand...
Click to collapse
After it gets through flashing, AS SOON as you see the DELL logo then press the volume buttons and go into recovery and select factory reset.... In other words after it flashes don't let it try to boot without doing a factory reset
Sent from my cm_tenderloin using Tapatalk 2

I thinc is the memory card, it has a problem a bad sector or something, you should try to replace the card if what cdzo72 said doesn't work.

I tried more than 3 times with 360 ROM. 1 time it ask me to confirm after select update.pkg, and the rest does not ask me to confirm, just black screen in approximate 15minutes and then reboot, after that stuck at Dell logo. I tried to use another external SD card. Custom ROM can recognize it but it's still not help.

They mean the internal card hiding beneath the plastic in the battery compartment. You either have to disassemble the Streak or cut away a section of the plastic to get to it.

dragon061088 said:
Still stuck at Dell logo after 30minutes, I tried to remove the battery and turn it back on. So far, still being stuck at Dell logo.
Click to expand...
Click to collapse
I have a question, What Rom are you ultimately trying to get installed? Lets start there and come up with a plan.

Related

Please Help me get back to 2.1build 6941

I upgraded to 8105...and want to go back ot build 6941...
I have 694l update.pkg on SD card
Boot streak into fastboot mode...
Streak in fastboot mode.
Double click the install recovery-windows.bat file....Recovery for 4399
dos cmd pops up d/l and streak below fastboot tells me Download complete.
Take out battery and boot up pressing power and volume buttons...
select option 2 to upgrade from SD...camera...
then blank screen...
I cant get rid of 8105...please help
try the recovery for 6941
I have tried...but i cant get passed 8105...ARghhh....
I have a cooked rom from Madaco Ad free sight...its in zip format...but i cant get that to load...dont know how ...Damnit ...should have well enough alone....now i have a sluggish streak with flashing home/return/menu buttons...Im so pissed......I cant passed update from sd card....just blank screen.

[Q] Dell Streak May Be Bricked...Need Advice

I have been working on this Dell all day now...trying to get it pushed to 1.6.1...in fact, mid-day I was able to install 1.5.1 back on it...I shoulda stayed there...
Here is my current issue...
While installing 1.6.1, the first thing I needed to do was restore....so I "restored to factory"....the problem now is that the machine keeps:
1) Turns on
2) Shows Dell Streak Logog
3) Goes white
4) Shows a message: Factory Reset start, please wait...
5) Quick shows a message: Please wait for reboot
Then it simply reboots over and over and over again....
THE GOOD:
-----------
I still have StreakDroid Recovery....
THE BAD:
---------
When I try to flash 1.5.1 or 1.5.3 after installing, it asks to reboot and it does the same as mentioned above...over and over again....
I have cleared Cache prior to starting...to no avail.
THE UGLY:
----------
I am able to get to FASTBOOT by using QDLTool...but the problem is that QDLTool doesn't seem to play nicely with Vista (the forums are saying this). I am able to get to 41.46 seconds on QDLTool and then the system craps out on me with the following error:
Wait for ADB device .........
ERROR[D2]: wait ADB fastboot mode timeout!
Please check that device is exist and driver is properly installed.
Download Fail! - 2011/02/01 18:48:52
Elapsed Time: 41.46 sec
I have changed the USB ports (I have 2 of them) and verified that the ADB install was conducted correct...it all looks good...er, except for the error message.
Any help here would be appreciated. $30.00 reward for getting me and my dell back up and running...I am close...
you need to install the dell drivers for the phone on your computer.
Breakdown-
1. There are qdl drivers called qser
2. Dell drivers
qser drivers are used for the qualcom connect via vol+ and cable plugged into pc.
the dell drivers load the adb driver your phone is complaining about.
My particular case and how I unbrick...
Do you have winx64?
1. put computer in test mode and load certs via streakdroid guide
2. put phone in qualcom mode
3. attempt to load driver qser.. this fails
4. reboot with phone still plugged in with the black screen in qualcom mode
5. open qdl tool
6. run it
7. on 2nd reboot the computer complains the adb driver isn't loaded.. my pc will actually start loading by itself via found new hardware.
8. after that is completed.... just reboot phone and put back in qualcom mode
9. re-run qdl and then it works fine
10. from there i load fastboot 309
11. upgrade to 318 froyo
I have not experience with DJ steve roms. but hopefully this helps you out.
This is what I did to come out from the same thing.
First do a facto reset on the first white font screen (not the streakdroid recovery).
Install 1.1.1
Wait for it to BOOT, now you can set up your account if you want to or leave it for after. MAKE SURE IT BOOTS UP TO ANDROID!!!! this takes up to 8 minutes. BE PATIENT.
Turn off properly without taking the battery out.
Install 1.6.1
done.
simple as that. Remember you CAN'T do factory reset on 1.6.1.
I did this about 4 times and it worked every time.
If you get the FC's try reinstalling 1.6.1 Without doing facto reset.
Hi,
I'm having a similar problem with my streak, rather than starting a new thread I thought this one might be a better bet.
I got a 2nd hand dell streak which was stuck in airplane mode for some reason - so I did some googling which recommended factory reset, which I performed by turning off and then turning on whilst holding the two volume buttons. Now I constantly get the message:
Factory reset start please wait...
Which changes briefly to
Factory reset done please wait...
Rebooting.
It then goes in an endless loop. Holding down the camera button won't get it into fastboot but I can hold down both volume buttons and get to recovery. I've tried installing update.pkg off an sd card but on the reboot from the install it goes back to the factory reset loop forever.
Any help would be appreciated
I'm trying to download repairtool from streakdroid but it's taking forever and I'm not really sure if it's needed on a stock phone?
---------------
Sorted, managed to get repairtool to download and I've de-bricked the device

[Q] Is my streak bricked?

I was using Type Fresh to change system fonts on stock 2.2 rom. Fresh type didn't tell me to reboot like it was supposed to. After manual reboot, it stopped at the Dell logo screen.
The factory reset didn't resolve it.
I found the update.pkg from the xda streak wiki. I can flash it successfully from the sd card, but at reboot, it still stalls at the logo screen. I left it there for several minutes, and it was still was stuck there.
yes but its a soft brick you should be able to fix it with a bit of reading here on XDA i would recommend the multi flasher tool it is easy to use but installing the drivers i think was a little difficult so yea bud good luck also did you try factory reset
Yeah, factory reset was the first thing I tried...
I'd run the QDL repair tool on it. If you can get your hands on it.
If not try the factory reset a couple of times consecutively and remember to give it plenty of time.
A factory reset of the DELL android system with all the junk they have in it can take up to 20 minutes to boot
markmark1 said:
I was using Type Fresh to change system fonts on stock 2.2 rom. Fresh type didn't tell me to reboot like it was supposed to. After manual reboot, it stopped at the Dell logo screen.
The factory reset didn't resolve it.
I found the update.pkg from the xda streak wiki. I can flash it successfully from the sd card, but at reboot, it still stalls at the logo screen. I left it there for several minutes, and it was still was stuck there.
Click to expand...
Click to collapse
Stuck on Dell Logo
Little note on what I had done to unbrick Streak from Dell Logo.
I had few trouble getting 2.2 installed
1) turn off
2) press both vol keys and power
3) select "Update from update.pkg from SD"
4) (re)Install update.zip (Steves) using Clockwork
5) Reboot and press both vol keys
6) "Factory reset"
tada!!! thats how I managed to get pass the Dell Logo.
cdzo72 said:
I'd run the QDL repair tool on it. If you can get your hands on it.
If not try the factory reset a couple of times consecutively and remember to give it plenty of time.
A factory reset of the DELL android system with all the junk they have in it can take up to 20 minutes to boot
Click to expand...
Click to collapse
Thanks for the tip, I read in some other threads about 3 mins. But last night I let it flash from the sd card, and left it to reboot overnight while I slept. This afternoon, I turned it on again and it worked!
Thanks!
MONSTERCUPCAKE said:
Stuck on Dell Logo
Little note on what I had done to unbrick Streak from Dell Logo.
I had few trouble getting 2.2 installed
1) turn off
2) press both vol keys and power
3) select "Update from update.pkg from SD"
4) (re)Install update.zip (Steves) using Clockwork
5) Reboot and press both vol keys
6) "Factory reset"
tada!!! thats how I managed to get pass the Dell Logo.
Click to expand...
Click to collapse
You can't install 1.9.0 with the stock recovery so you would have to tell him all the steps to get into fastboot and flash a custom recovery.
Posted with StreakZilla, using XDA App.

[Q] need help to make streak refunction again

I have a Hugh problem now that need someone to help me out!!!
I was use my streak 4-5 months problem-free until around a week ago it start acting weird by some random massages show up, sometime cannot answer the call and randomly reboot so I try factory reset my phone (BUT THAT IS WHERE THE REAL PROBLEM BEGIN) after factory reset my streak freeze up at dell logo screen ,I remove the battery out and reboot it again which is the result still the same, I replete the reboot 5-6 times until I accept the it is brick!!!! after a few days on research I try fastboot it and try to boot into FW 351 (my streak begin with FW 309 out of the box) with somehow cannot boot up (Freeze at dell logo) so I try to go directly to the streakdroid 1.9.1 and it can boot up to the home screen, but after reboot it strucked at boot loop of streakdroid with Dj steve flashing text (it can boot past dell logo) then I try various version of streakdroid including 1.5.1 1.6.0 1.6.1 1.7.0 1.8.0 1.9.0 that notthing boot up so I try simplestreak1.2 witch can boot up and function well with the issue of cannot install app from apk on sd card. try to reboot sometime can boot pass the process but sometime struck at "android" logo of simplestreak loop that need to reflash rom again and when it can pass all the boot process it still have an issue about the apk install and cannot reboot so i try to reflash back official rom 351 and someother version such as 309 318 354 but still no luck at all. All the flashing process going well but it cannot boot pass the dell logo
Help me please!!! because I already fall in love with this big boy and want it back to function so much!!!!!!!!! (sorry for my broken English)
and now situation going worst witch I struck on recovery mode and can boot up into normal one (after install rom and reboot it always show up reboot to recovery mode) but still can go to fastboot mode by quickly press&hold the shutter botton after reboot
The internal SD card on your streak may be bad.
To find out start fastboot mode.
When you have the small touch pad on the right enter *#301#
This will start a internal test of the SD Cards. Everything should pass.
If it fails you need to replace the internal SD card.
I had this issue before and that is what the problem was for me.
Hey All,
I was trying to install GingerStreak 2.4.4 from GingerStreak 2.4.3.
http://forum.xda-developers.com/showthread.php?t=1333010
According to the instructions, I flashed
amss.mbn - http://mirror2.streakdroid.com/amss.mbn
and
dsp1.mbn - http://mirror2.streakdroid.com/dsp1.mbn
(got both the files from the first link above)
Then when I tried to reboot into Bootloader (Power+Vol Up+Vol Down) but nothing happens apart from the Dell logo being displayed.
I try to boot normally, still stuck at the Dell logo. The phone never even reaches the boot animation.
I try to go boot into fastboot (power+camera key)mode, but the phone never even boots. The screen stays off, so do the LED lights.
I figured out that the files downloaded above were incomplete(due to slow speed Chrome showed incomplete files as download complete).
amss downloaded: 111KB. Actual Size: 15.41MB
DSP1 Downloaded: 250KB. Actual Size: 8.94MB
So, I flashed the wrong files.
Now, I guess, the phone is bricked big time.
I need big time to get into fastboot mode (to flash the correct files) or anyhow get my phone working.
Guys, need help. Please help me out and get this issue sorted out.
I don't know the details but search for instructions on either streakflash or qdl tool. That may get you back.
Sent from my Dell Streak using Tapatalk
This is what got my streak back to life:
http://forum.xda-developers.com/showpost.php?p=21178746&postcount=11
any luck?
supersophisticated said:
Hey All,
I was trying to install GingerStreak 2.4.4 from GingerStreak 2.4.3.
http://forum.xda-developers.com/showthread.php?t=1333010
According to the instructions, I flashed
amss.mbn - http://mirror2.streakdroid.com/amss.mbn
and
dsp1.mbn - http://mirror2.streakdroid.com/dsp1.mbn
(got both the files from the first link above)
Then when I tried to reboot into Bootloader (Power+Vol Up+Vol Down) but nothing happens apart from the Dell logo being displayed.
I try to boot normally, still stuck at the Dell logo. The phone never even reaches the boot animation.
I try to go boot into fastboot (power+camera key)mode, but the phone never even boots. The screen stays off, so do the LED lights.
I figured out that the files downloaded above were incomplete(due to slow speed Chrome showed incomplete files as download complete).
amss downloaded: 111KB. Actual Size: 15.41MB
DSP1 Downloaded: 250KB. Actual Size: 8.94MB
So, I flashed the wrong files.
Now, I guess, the phone is bricked big time.
I need big time to get into fastboot mode (to flash the correct files) or anyhow get my phone working.
Guys, need help. Please help me out and get this issue sorted out.
Click to expand...
Click to collapse
any luck on reiviving your phone? got the same issue. can't get pass dell logo.
Its very rare that a streak actually dies. Correct me if im wrong.
By reading through this forum 99% of the time you can find the answers to your problems.
Use Streak Flash tool to recover your device.

Bricked Dell: Hangs on Bootscreen

Dell Streak through Rogers(Canada)
Ive read all of the "bricked streak" threads already and none match how my phone bricked. I was in the process of installing superboot according to the cyanogenmod streak wiki's instructions. After it installed it started hanging at the boot screen so as any good idiot who just bricked his phone, I googled and hunted on here until I couldn't type simple words. So I found one fix guide that I tried and all has worked except installing the stock rom. I will list the guild, its brief one issue I had to substitute the Rogers rom for an O2 rom as I couldn't find a rogers rom for the streak.
1. Download the stock recovery ROM and stock official Dell ROM. Make sure Dell PC suite has installed.
2. Rename the stock official Dell ROM to "Update.pkg" and copy it to your Dell Streak SD card.
3. Turn on your Dell Streak while holding camera button to boot Streak into fast boot mode.
4. Tap on "Fast boot Mode" button, wait 10 seconds then connect to your PC.
5. Open a command prompt, and navigate to the folder where your "fast boot-windows.exe" is stored.
6. Enter "fastboot-windows.exe -i 0x413c flash recovery c:\recovery.stock.img". Make sure the .img file is in c:\ directory. The program will now update the recovery image to your Dell Streak.
7. Once the phone displays "Recovery Done", remove the battery and insert it again.
8. Hold down vol up and vol down button while turning on your Streak to boot into Recovery mode, and choose option 2.
9. Wait till it installs and it'll boot into Android.
You have finished restoring Dell Streak to factory condition.
Method 2
1. Put update.pkg to SD card root folder.
2. Power up Streak whilst holding both volume buttons.
3. Select option 2 - "software upgrade via Update.pkg on SD card" by pressing camera button.
4. Press camera button again Job done.
Category:
Science & Technology
Tags:
Dell Streak Recovery image Bricked Android O2 AT&T
License:
Standard YouTube License
Okay so I figured out the solution, I need to recover it to stock from what I understand. so I've followed the guide(s) and I still have the phone hang after "install update.pkg" with just a blackscreen. I've tried to put the streakmod recovery but I cant get it to install either, hangs on blackscreen as well.
Guys it will be great help if some body can give me the links to the official dell streak 2.1 rom.
Thanks in advance.
techsavvy.jaz said:
Guys it will be great help if some body can give me the links to the official dell streak 2.1 rom.
Thanks in advance.
Click to expand...
Click to collapse
Start here - it's stickied in the General section. Also a search never hurts.
Links in my signature might also be helpful.
My bad i didn't search, i was kinda frustrated..
thanks any ways.
Linehanca said:
Okay so I figured out the solution, I need to recover it to stock from what I understand. so I've followed the guide(s) and I still have the phone hang after "install update.pkg" with just a blackscreen. I've tried to put the streakmod recovery but I cant get it to install either, hangs on blackscreen as well.
Click to expand...
Click to collapse
I'm having the same problem , did you fix yours ??
Mine hang a minute after the Dell logo ...
Just recentally fixed mine ie the screen after a year I managed to get it to boot did a reset as it was stalling at dell logo and then sometimes not even switching on just siting with leds on. So after the reset haven't been able to get it to boot so will give this a try see if it works so that I can at least sell it!
Rogers Dell Streak 5 - Totally Desperate Now
Great Forum everyone! Thanks for years of support. After three days of searching, scanning and racking my tiny brain for a solution I am finally breaking down and reaching out to all you good ppl ...I fear after several years of flashing various devices (albeit somewhat amateurishly) I have finally created my first true paperweight. Surely not!
Whilst trying to root my Dell Streak 5 using the Superboot method I think I have managed to brick it somehow...
Tried the method outlined at the beginning of this thread and all goes well until step 8 when my phone boots into Android system recovery <2e>. From here I have manually tried to "apply sdcard:update.zip" this hunts for the file but presumably its looking for a .zip extension not Update.pkg as I have named it. I tried on the off chance renaming the Update.pkg to .zip but then AR says 'bad package'.
Here' what I know:
Dell Streak 5 (Rogers) - Carrier unlocked via Streak Unlocker software (paid for)
Device boots up to Dell screen and hangs on logo, sometimes the logo splash
appears and hangs other times it just flashes Dell logo repeatedly.
When plugged in without battery and left volume key held down device did get recognized as A Qualcomm CDMA MSM device or something. So I don't think its completely dead.
Totally Lost at this point and desperate for help
Any suggestion or additional info would be most helpful.
Thanks
It happens when you using Clockworkmod.
I recommend you to use Streakmod. I had try Clockworkmod as recovery image. But it doesn't work well. I'm using Streakmod and it goes pretty well.
Sent from my Dell Streak using Tapatalk
Thanks drsuocide I will give this a go and feedback...
Streak lives again
And my Streak has life again. Thanks for the walk through and help
Wish mine would live. It gave it up yesterday. I've tried every frickin thing I can think of including the QDL tool to revive it. Nada.
Guess it's time to part it out.

Categories

Resources