I kept flashing my at&t fuze many times to find the perfect one but i wasn't happy so i flashed it to nfsfan wm6.5 after that i turn the phone on and its stuck at the at&t screen in the beginning ....any one knows how to fix this problem?
this is the cdma section & att is gsm his rom wont work on your phone..u need to flash to a different rom (att/gsm)
yea you should read before you flash
man i didnt know am a noob..lol..can somoene please send me a link or something to download ?
Some ROMS do not like certain phones, trust me your not the only one this has happened to. Try flashing a new ROM and it should work. I myself cannot flash certain Kitchens. When i do the same issue your having occures with my phone. Just reflash a new ROM and you should be good.
Currently I have a HTC Touch Pro with Sprint, the ROM has never been changed since I got it, I have modified many things about it but I have never gotten as deep as flashing ROM's. I'd like to do this without bricking my phone so I am sort of paranoid about being careful doing this.
Basically, I am canceling with Sprint and I want to change my ROM to work with the Verizon/Alltel network so I am able to activate it on the PagePlus network. I know there are many things to go through on this forum that probably answer my question.. but I don't know where to start.
Are there already instructions for this somewhere or could somebody give me some? Any help is appreciated.
vap3riley said:
Currently I have a HTC Touch Pro with Sprint, the ROM has never been changed since I got it, I have modified many things about it but I have never gotten as deep as flashing ROM's. I'd like to do this without bricking my phone so I am sort of paranoid about being careful doing this.
Basically, I am canceling with Sprint and I want to change my ROM to work with the Verizon/Alltel network so I am able to activate it on the PagePlus network. I know there are many things to go through on this forum that probably answer my question.. but I don't know where to start.
Are there already instructions for this somewhere or could somebody give me some? Any help is appreciated.
Click to expand...
Click to collapse
You have to unlock your device before being able to flash a rom on it. The flashing and the transferring of the device to another carrier are two separate matters. If I were you (and considering that Verizon tech support are not the smartest, or the brightest), I would leave the device with the stock rom, take it to Verizon, have them add the device to their network, and then unlock and flash a new rom. I have a tutorial on how to flash to other roms (look in my signature), but do it only when you are ready.
Good luck!
Is any able to advise me if the Telstra version of the Atrix would have similar issues to the Bell OS, if I decided to load up Motobread, Ginger blur etc etc.
Staunch said:
Is any able to advise me if the Telstra version of the Atrix would have similar issues to the Bell OS, if I decided to load up Motobread, Ginger blur etc etc.
Click to expand...
Click to collapse
I may have missed something but i followed the steps to install gingerblur and well, it bricked my Telstra atrix that I only got yesterday
Luckily i made a backup of the telstra firmware as soon as i got it so its all good. Just got no idea on how to install CF. The telstra atrix i'm assuming is the same as the AT&T atrix because they are both "Motorola Atrix MB860" but i could be missing something
Uh oh, radio's and fingerprint reader aren't working
Oh, and it also wont turn itself off!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
PS: OMG Atrix is released in Australia now? I should go find a telstra store and check out the differences, my Atrix that I've had since launch (from AT&T then unlocked) is the only one I've actually used so I'd love to see if the bugs in mine still exist in telstra's hahaha
EDIT: Oh and if u need a briefing. Bootloader Bypass has basically dropped off the radar and turned silent, probably still being worked on in private chats to avoid spam and offtopic posts. 2nd Init works (a different way to install custom ROMs however unable to modify kernel) but there are no ROMs developed yet, probably also being worked on in private chats if you are interested check out the freenode IRC #moto-atrix
All ROMs released as of writing are pseudoROMS that only theme and lightly modify the current OS
Thanks
DarkRyoushii said:
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
Click to expand...
Click to collapse
I had a really bad feeling that that would be the case. Bell users appear to have a limited range of options compaired to the AT&T users. Now it seems that the Telstra users will have even less options than the Bell users.
I have at least managed to load HeLauncher, Pyramid & Fancy widgets tonight and now I've have more of the options that I wanted from the HTC desire sense UI.
Still trying to work out how to get my hands on the widget/live weather wallpaper that has that Super Cool looking windscreen wiper that clears the rain away.... Any ideas on how to get ahold of it?
Thanks again.
limited how? what version is your telstra rom? (wondering if its the same as the one that is already on this site)
as for the windshield wiper, that is from sense....oh i see you found the mock sense thread.
y2whisper said:
limited how? what version is your telstra rom? (wondering if its the same as the one that is already on this site)
as for the windshield wiper, that is from sense....oh i see you found the mock sense thread.
Click to expand...
Click to collapse
My system version is;
Version.4.1.47,MB860.Telstra.en.AU
Thanks for the info, I will start looking for the other one on this site.
So i can guess we can all agree that Telstra's Atrix cannot be flashed with custom ROM's from AT&T. I just tried it again tonight with different roms and all works up, shows "Ginger Blur" or whatever it is and then the red blinking failed boot and it just tries over and over to boot. I'm gonna flash back to OLYEM_U4_1.4.2_SIGNED_USAOLYEMTELSTRA_P029_A020_M005_HWolympus_1g_1FF and just sit and wait till something comes up unless someone's got something they wanna try
they should be able to flash using the gingerblur/greyblur guide by seven2009. you may not be able to deodex with the same instructions but installing should be fine, you would need to flash grey blur and factory reset the device before installing gingerblur.
If that route doesn't work you may need to start by flashing the french rom that is mentioned in that thread first.
makmegs said:
So i can guess we can all agree that Telstra's Atrix cannot be flashed with custom ROM's from AT&T. I just tried it again tonight with different roms and all works up, shows "Ginger Blur" or whatever it is and then the red blinking failed boot and it just tries over and over to boot. I'm gonna flash back to OLYEM_U4_1.4.2_SIGNED_USAOLYEMTELSTRA_P029_A020_M005_HWolympus_1g_1FF and just sit and wait till something comes up unless someone's got something they wanna try
Click to expand...
Click to collapse
You are doing better than me so far, but I must admit that going for custom ROM's has me a bit worried. I flashed my Nokia 5800 and it was better for looks and customisation, but it crashed alot. Then I jail breaked my iSheep (iphone 3G) and that was a little better than stock iOS, but it also crashed alot too.
I am hesitant to play around too much with the Atrix, simply because it's so new, and I was patient enough to wait for the Telstra release (instead of an imported AT&T version). However I found this thread that may shed some light on the topic at hand.
http://forums.whirlpool.net.au/forum-replies.cfm?r=29747620#r29747620
User "LeChuck" has some great knowledge and info about this Telstra firmware.
I am just not adventurous enough at the moment to have a crack at it. All I need to do, is find out how I could hard reset back to stock firmware if I don't like mods, then i'll give it a go. Even since rooted it over the weekend, I've notice3d more little issues each day I play around with things.
Can it be "Un-rooted" (is that an actual term used???) back to standard?
DarkRyoushii said:
You guys should probably be following instructions for the Bell Atrix. Bell users have been successful at flashing the telstra firmware and then installing grey/ginger blur and so I'd start there.
Hope it helps
DarkRyoushii
PS: OMG Atrix is released in Australia now? I should go find a telstra store and check out the differences, my Atrix that I've had since launch (from AT&T then unlocked) is the only one I've actually used so I'd love to see if the bugs in mine still exist in telstra's hahaha
EDIT: Oh and if u need a briefing. Bootloader Bypass has basically dropped off the radar and turned silent, probably still being worked on in private chats to avoid spam and offtopic posts. 2nd Init works (a different way to install custom ROMs however unable to modify kernel) but there are no ROMs developed yet, probably also being worked on in private chats if you are interested check out the freenode IRC #moto-atrix
All ROMs released as of writing are pseudoROMS that only theme and lightly modify the current OS
Click to expand...
Click to collapse
I have a buggy unlocked AT&T Atrix too and have been waiting for it to come out in OZ to flash it with either the Telstra Rom or something else. Can you (or anyone) make a suggestion?
procedure of installing custom rom
procedure of installing custom rom on atrix details are below.
system version: 45.0.20.mb860.telstra.en.au
model number:mb860
android versoin:2.3.4
basband version : N_01.100.00R
Webtop version: WT-1.20-133_23
Kernal version [email protected] #7
APflex version : GAS_Asia_usaolygbautel_p013,a012,m001
build number: 4.5.2A-74_OLE-20
shanitop_you said:
procedure of installing custom rom on atrix details are below.
Click to expand...
Click to collapse
You mean, you would like the procedure of installing a custom ROM on those specs? I would too.
It's mainly the BL unlock process I am not sure about on Telstra Atrix of the same spec. I'm comfortable with the rest.
About 4 months ago I installed a Rom to my girlfriends vibrant and it has been AWESOME compared to the stock touchwiz and compared to any of the roms I ever installed(tried all of them) for my HD2 and the few roms I have tried on my new-to-me Fascinate. The ROM just feels so cushy smooth, scrolling,resizing ect touch commands are almost iPhone-like and the stock UI has perfect icons, colors ect. I just can't say enough good things about this phone now.
I lost the original thread I got the rom from. The build shows "Simply Honey 3.5 Revolution by SGT" but I believe it's been ported from the i9000 as I had to flash a i9000 bootloader that I assume has been modified for the vibrant.
Is there any way I can get this rom onto my Fascinate? It seems hard to believe others aren't aware of this rom but a search for "simply honey" in the fascinate section and sub sections has returns zero results.
If you don't see it in the Dev forum, it's not available for the Fascinate.
The hardware on the SGS line is different enough (particularly between GSM and CDMA variants) among carriers that flashing a ROM from a different carrier is a fast track to bricksville.
Your best bet, if you REALLY want a particular ROM is to get the sources from the developer of that ROM and start working on your own version (porting it, as it were), or convince the dev to start working on a Fascinate version of it.
Also: Never ever ever flash a GSM ROM onto a CDMA phone. If it works at all, you'll be flashing all the way back to DL09 (and probably repartitioning, as well) to get back to square one.
AlexDeGruven said:
If you don't see it in the Dev forum, it's not available for the Fascinate.
The hardware on the SGS line is different enough (particularly between GSM and CDMA variants) among carriers that flashing a ROM from a different carrier is a fast track to bricksville.
Your best bet, if you REALLY want a particular ROM is to get the sources from the developer of that ROM and start working on your own version (porting it, as it were), or convince the dev to start working on a Fascinate version of it.
Also: Never ever ever flash a GSM ROM onto a CDMA phone. If it works at all, you'll be flashing all the way back to DL09 (and probably repartitioning, as well) to get back to square one.
Click to expand...
Click to collapse
As I said, it's not mentioned in any of the sub forums according to the search and nowhere on my google search either so I realize it's probably not available but I posted hoping someone would post with information directly relating to experience with the ROM and maybe developer inside info or information to another ROM with similar refinement.
Hoping you guys could help me out a little bit here...I;ve already tried asking this in the cdma development section, in the aosp rom threads. I use Clear Wireless for my 4g provider on my phone, but everytime I try and install an aosp rom, it must always change my realm, but any of the aosp roms that claim they have the 4g working never seems to work for me, and I have no way to change the realm because of lack of dialer codes. I flash back to a sense rom, and the realm is indeed back to sprintpcs instead of clearwire-wmx.net. I know changing hboots will change information like that, but I am keeping the same hboot. I change it back to clear, flash an aosp rom, and the same thing happens. I never get a connection. Does anyone know where in the rom it makes these changes? I've already tried the default_tree.xml in the /system/wimax, but that didn't work. Anyone else know how else I can make the change in the rom before flashing since I can not make the change after flashing?
up!