Hey peeps !
Im sure you are all just as thrilled as i am to finally have the 2.1 update on our phones !!
But.. currently im having some problems connecting to my home wifi network. I can see the network on the phone, i can also enter my details, but i cant get the thing to connect.
Is anyone else having problems ? Or does anyone know a possible solution ?
PS: A BIG BIG thanks to the people that made this happen with the flashtools nordic firmwares etc !...
no problems at all with wifi so far.... works like a charm
I have a problem with my company's AP. It's a Zyxel P-320W. I can't find any wireless signal from it ( i have internet conection from some AP around my company, but it's unstable). Sorry for my bad English. Thanks so much!
Hey guys,
i have the atrix 4g on which i used a simunlock code, so that i coudl put in my sim card from a european carrier, that works great, but the thing is the WiFi stopped working, it just went into a scanning/connecting loop and than it disconnects.
So i factory restored it and figuered out that s soon as i put in a working sim card (one that has cellular reception), the WiFi starts to behave like that and to get it to work i have to factory restore again without a sim card or with a nonworking sim card.
So i tried the motorola support and they said ye hardware issue, send in the phone, my problem however is im in europe right now and i cant really send or get the phone to motorola USA and they totally refuse to send it to an address outside of the US. However im 100% sure its a software issue (both things work for itself, and the thing that even removing the sim card doesnt restore the wifi funcionality makes me think there is some software issue).
So please guys if anyone has an idea how i could fix that i would be really greatful. Btw i tried some of the apps from the market to "fix" wifi (fxr, wififix etc). Fxr said it fixed the wifi bit it still wouldnt connect, the other apps just had the same issue as the stock wireless manager.
Thanks for your time
Did.you use software to unlock it or just a code?
Sent from my MB860 using XDA App
just a code
crnkoj said:
Hey guys,
i have the atrix 4g on which i used a simunlock code, so that i coudl put in my sim card from a european carrier, that works great, but the thing is the WiFi stopped working, it just went into a scanning/connecting loop and than it disconnects.
So i factory restored it and figuered out that s soon as i put in a working sim card (one that has cellular reception), the WiFi starts to behave like that and to get it to work i have to factory restore again without a sim card or with a nonworking sim card.
So i tried the motorola support and they said ye hardware issue, send in the phone, my problem however is im in europe right now and i cant really send or get the phone to motorola USA and they totally refuse to send it to an address outside of the US. However im 100% sure its a software issue (both things work for itself, and the thing that even removing the sim card doesnt restore the wifi funcionality makes me think there is some software issue).
So please guys if anyone has an idea how i could fix that i would be really greatful. Btw i tried some of the apps from the market to "fix" wifi (fxr, wififix etc). Fxr said it fixed the wifi bit it still wouldnt connect, the other apps just had the same issue as the stock wireless manager.
Thanks for your time
Click to expand...
Click to collapse
I have the exact same problem.
My phone is unlocked and can make calls, but WiFi disconnects me almost immediately. The phone also thinks my prepaid sim has H+ connectivity.
When I go back to my AT&T SIM, I have to do a reboot or 2 to get it cleared up, and then WiFi works again.
oh, i see that, i guess its some sort of ATT measure to block nonATT SIM cards, eventho the phone gets simunlock code. But the funny thing is there are a lot of people for whom it all works (like the guys in the unlock thread, using it in canada without a hitch), so im really wondering if this is not just a software glitch (i hope it is and gets fixed witht he 2.3 update..), otherwise my only hope are the devs here to crack wide open the bootloader and put some custom roms on it =/ really a great phone, but all this ATT software crap makes it feel like its an Iphone ...
But uhm still, anyone has any ideas how to try to fix this problem before the updates? =/
crnkoj said:
oh, i see that, i guess its some sort of ATT measure to block nonATT SIM cards, eventho the phone gets simunlock code. But the funny thing is there are a lot of people for whom it all works (like the guys in the unlock thread, using it in canada without a hitch), so im really wondering if this is not just a software glitch (i hope it is and gets fixed witht he 2.3 update..), otherwise my only hope are the devs here to crack wide open the bootloader and put some custom roms on it =/ really a great phone, but all this ATT software crap makes it feel like its an Iphone ...
But uhm still, anyone has any ideas how to try to fix this problem before the updates? =/
Click to expand...
Click to collapse
i also have a friend in saudi arabia who got the unlock code and the wifi is working fine.
only 2 people reported this so far. i guess it could be a hardware problem ? because the other user beside you have this problem even without sim installed " or that what i understood from him "
you can check the other thread too. maybe someone could post something usefull.
hmm i see, where did you find that thread, i was sort of searching for ages and didnt find any issues like that =/
Ye i mean i have this problem without a sim aswell if i dont factory restore the phone, after i do that without a sim card however the WiFi works great...
so i am kind of reluctant to believe it being a hardware issue due to this, sort of software specific issue (at least i think if it would be hardware related, the wifi would start working as soon as i go to airplane mode/take out the sim and a factory reset wouldnt be necessary), or do you think that my theory is rather flawed in thinking that?
and ye the problem is im in europe now and as the reps at motorola support told me, i would have to send the phone to the US for warranty and they would only send it back to an address within the US =/ i will try my luck with the german and uk support site, to see if they could do something for me.
thanks for your time guys tho
hey guys what do you think if i would use this code:
* 2767 * 3855 #
Think before you give this code. This code is used for formatting the original manufacturer. This will delete all files and settings, including internal memory storage. This will also reinstall the phone’s firmware.
To restore it to manufacturer (will it request an unlock code again after that?) cuz i have 2 codes to unlock but the first one worked, so maybe if i woudl try it with the second one than?
I just unlock my atrix with the code from cellunlock, works great and wifi is fine as well. Would like to know where u get the code, and how it turns out if u try reset to default using the combo. Pls update. Ths
Sent from my MB860 using XDA App
I'm having the same issue of not being able to connect to WiFi.
I bought the phone in Las Vegas with an AT&T - pay as you go (no contract).
I bought an unlock code from SwiftUnlocks, and used my Rogers SIM, which appeared to work. I then rooted the phone.
Using the Rogers network, I've been unable to use any sort of data. Phone calls and texts work fine. Then I noticed that my WiFi was not working properly. It would try to obtain an IP address, but couldn't connect. After several reboots, I got the phone to connect to WiFi for a few minutes.
I just did a factory reset, now I'm unable to connect to any network or WiFi to login with MotorBlur, so I can't really use the phone now.
I'm quite frustrated and not sure what else I can do.
Update - after putting the original AT&T SIM card in, and rebooting several times, the WIFI started working again.
I'm still unable to get Data working over the Rogers network in Canada.
Squig80 said:
Update - after putting the original AT&T SIM card in, and rebooting several times, the WIFI started working again.
I'm still unable to get Data working over the Rogers network in Canada.
Click to expand...
Click to collapse
i am getting my phone in few hours, then i am going to order from cellunlock a code and wait for 2 days to get the lock. unless someone has a spare code he can pm me i would be thankful.
the code is IMEI specific, cant give oyujust spare codes
secondly, to get wifi to work you have to remove your sim card, put in the att or a nonworking sim card and do factory reset, than wifi will work. and you can load all the stuff via wifi, and than just put in your working sim and use the phone as a phone +3g data (the 3g data works great for me to be honest)
oh i got my code from swiftunlock but i dont think that matters, they all get it from teh same provider im pretty sure.
and if anyone si wondering t he sbf update did NOT fix my wifi problem. i ahve tried several wifi fix programs and neither worked aswell, the fxr wifi did some stuff that the phone now sees the networks but still cant connect.
this is to update everyone that i got the phone. had an issue about the screen doing lots of flickering. contacted amazon and sent it back.
in the whole process so far i lost around 60$ between importing and exporting the phone. all in all. i will stick with my iphone 4 for now. its a good phone.
but i cant take this sadness all over again if i imported another phone with an issue with it as well. i am too OCD for my own good.
so true what you say, tho im coming form a nokia 6220 classic, a bit older than the iphone 4
Hey GUYS...
I have the same problem.... My Bell Atrix WiFi works great with my Rogers SIM (I had someone unlock it for me), but when I put in my Qatar Qtel SIM, it stops working, and goes into that connect/scan/disconnect loop.
Any solutions?
Search in the dev forym there is a solution for it
crnkoj said:
Search in the dev forym there is a solution for it
Click to expand...
Click to collapse
Thanks. Found it: http://forum.xda-developers.com/showthread.php?t=1077329&highlight=wifi
help mine stoipped working
[16:53] <arana> hi guys i need help with an unlocked atrix 4g att , that was ulocked with att code, then in order to use recovery i got one of the files here http://forum.xda-developers.com/showthread.php?t=1204500
[16:53] <arana> now it is unlocked but wifi is stuck at obtaining ip address
[16:53] <arana> i tried the solutoin here: http://forum.xda-developers.com/showthread.php?t=1077329&highlight=wifi
[16:53] <arana> but still not working
[16:54] <arana> i'll appreciate any help
[16:56] <arana> if possible i would like to put the stock recovery partition if that would fix things, or unlock it with official sbf but i can find it
[16:56] <arana> i used zomgunlock-lite.sbf to unlock
any help?
my carrier is telcel (mexico) and wifi was working fine before i "unlocked" the phone, thank you for any help
hi guys, im new here. here is my problem:
i have a brand new samsung galaxy s3 and im having a problem with the s voice application. it works fine on data conection, but when i switch to wifi i get "network error. please try again". this is the second phone the dealer gave me. the previous one was giving the same error, i returned and got a new one and still having same problem. its a non rooted international version.
can anyone help me with this???many thanks
zeynl said:
hi guys, im new here. here is my problem:
i have a brand new samsung galaxy s3 and im having a problem with the s voice application. it works fine on data conection, but when i switch to wifi i get "network error. please try again". this is the second phone the dealer gave me. the previous one was giving the same error, i returned and got a new one and still having same problem. its a non rooted international version.
can anyone help me with this???many thanks
Click to expand...
Click to collapse
S voice is crap m8, at least it is for me cos i'm a scouser (liverpool) but it isn't perfect anyway, not something that you should return your phone over, but if it's bothering you then i would clear all defaults and maybe try a different wifi connection, it would be bad if it was down to a router needing rebooting lol.
Mines fine on either and i think a problem like this persisting over two phones means that either its a horrible coincidence or something else is ado.
Check your wifi, or try someone elses.
dladz said:
S voice is crap m8, at least it is for me cos i'm a scouser (liverpool) but it isn't perfect anyway, not something that you should return your phone over, but if it's bothering you then i would clear all defaults and maybe try a different wifi connection, it would be bad if it was down to a router needing rebooting lol.
Mines fine on either and i think a problem like this persisting over two phones means that either its a horrible coincidence or something else is ado.
Check your wifi, or try someone elses.
Click to expand...
Click to collapse
s voice its not a must for me. but still why cant i get what i payd for?lol...especialy after samsung making all that marketing about the s3 and the svoice app.
i tryed with 3 difrente wifi conections all with a good strong signal.cleared all the data and all on the s voice app but nothing. now im just pisd with samsung. went to their costumer care centre and they say they are still trying to find out what the issue is as several other users have reported this error