hi i really need your help badly
my razr(xt910) is restarting and baseband/imei unknown. i tried some roms and flashin it with rsd and fla**** but no luck. im out of option
can i anyone familiar with this problem?
please i really need your help guys
Hey,
Where're you from and what fastbootfile you've used. Maybe you flashed the wrong for your Country.
im from philippines. how can i detect my phone to where it from?
i used this and no luck same problem
-SPDIRD-40_ASIA_RT_1C.91P_CFC_P2B_Signed.xml
-SPDREM_U_01.6.5.1-73_SPU-11-PASS-10_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml
-SPYDERIRD_U.01.26.0_SPD-IRD-21_SIGN_ASIA_OPERATOR.xml
http://sbf.droid-developers.org/
Here's an Link 4 actual Fastboots.
I think you need Asian Fastboots, but you've tried them already.
I know, this one has an Asian Baseband (93) so maybe give it an try..
http://sbf.droid-developers.org/umt...USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
ok sir i will try it now after download.
still no luck sir .. same problem
Open your slot, where your sd card is in. There you'll find your IMEI.
With this you can figure out the right firmware for your phone over Motorola support.
Try this...
anyone with same issue who solved this problem?
Sounds like it got wiped something with Sammy we had tools to back up, if finding the right stock ROM doesn't work there may still be hope since some SGSII users managed without a backup.
Sent from my XT910 using xda premium
embbet009 said:
hi i really need your help badly
my razr(xt910) is restarting and baseband/imei unknown. i tried some roms and flashin it with rsd and fla**** but no luck. im out of option
can i anyone familiar with this problem?
please i really need your help guys
Click to expand...
Click to collapse
Sounds like you need to reflash a radio image. I had the same problem going back to stock GB from the Chinese ICS leak.
Have a look in the development forum for the stock radios thread, flash one of them manually through fastboot. That should fix it.
is that can use to xt910?
No but you may have a search them sides as some users had it fixed since not even jtag would sort it.
Edit: When have time later I'll try find some info.
Another option would be fastboot stock and use warranty no mention of root etc but could say it happened on ota update or the likes...
Sent from my XT910 using xda premium
sorry to say but no warranty for the device. i buy it 2ndhand
Sorry guys for the mistake im not booting into safemode .. I boot in BP HD DIAG & BP AP I think the 5 one in getting into recovery before BP TOOLS .. There its not.restarting I thought is safemode lol
embbet009 said:
Sorry guys for the mistake im not booting into safemode .. I boot in BP HD DIAG & BP AP I think the 5 one in getting into recovery before BP TOOLS .. There its not.restarting I thought is safemode lol
Click to expand...
Click to collapse
HI
embbet009
could you repair? How?
Thk
i have this problem
i'm from brazil and i have this problem to, baseband/imei unknown.
please help me.
Related
Flashed stock bell phone & CSC via Odin. Now phone wont read my sim. Any advice?
iamerwin said:
Flashed stock bell phone & CSC via Odin. Now phone wont read my sim. Any advice?
Click to expand...
Click to collapse
Check your /efs folder or reflash radio ..
forgive me, complete sgsii newb. kind enough to share?
Dude, seaech for it. Dont just go poking your head round for this. And you dont know what flashing a radio means?
Sry but u shudnt have rooted, ul probably brick ur fone if u go by this.
Best bet do some research before trying something
Sent from my HTC Desire using XDA App
My appoliges sir. i have some knowledge of flashing radios, coming from a Nexus S. Just getting a feel for Odin process. Thanks anyways for your time.
reidar.ostrem said:
Check your /efs folder or reflash radio ..
Click to expand...
Click to collapse
Thanks for your advice!
Checked the Efs folder, everything is there.
Tried reflashing original bell phone & csc + kernel again.
Cant seem to figure it out
I have been having serious issues with reboots with all the roms I have tried to flash. Ever since I flashed the DSP 1 for the maxicentDroid rom my phone hasnt been the same since.. I have even went back to stock and the same problem. Could it be just a hardware problem? I changed the internal memory to a class 6 samsung mini SD 4 gig. Can someone Please help me on other things I could do.. I think I have tried everything known to man.. Thank you guys for your help..
Rob183 said:
I have been having serious issues with reboots with all the roms I have tried to flash. Ever since I flashed the DSP 1 for the maxicentDroid rom my phone hasnt been the same since.. I have even went back to stock and the same problem. Could it be just a hardware problem? I changed the internal memory to a class 6 samsung mini SD 4 gig. Can someone Please help me on other things I could do.. I think I have tried everything known to man.. Thank you guys for your help..
Click to expand...
Click to collapse
best thing you can do is flash stock 407. so that all your low level files are in sync and then do a factory reset and let it boot a few times before you start tweaking
Please help me with my wt19i
hi,yesterday i flashed my live with walkman with rage kernel and today i install custom rom real ics r5....i dun know why everytime i connect my phone to pc it hangs...it jammed and the it reboots....please help me,why this thing is happening?yesterday was using real ics 4.1 also was the same...it was much worst it will jammed and reboots sometimes not only when connect to pc....can anyone help me with this?please?im worried that i will damage it my phone....
VassanShaky said:
hi,yesterday i flashed my live with walkman with rage kernel and today i install custom rom real ics r5....i dun know why everytime i connect my phone to pc it hangs...it jammed and the it reboots....please help me,why this thing is happening?yesterday was using real ics 4.1 also was the same...it was much worst it will jammed and reboots sometimes not only when connect to pc....can anyone help me with this?please?im worried that i will damage it my phone....
Click to expand...
Click to collapse
sorry man... you are in the wrong thread... no idea how to help...
sorry
deysmacro said:
sorry man... you are in the wrong thread... no idea how to help...
Click to expand...
Click to collapse
ow,im sorry...then where can i find my solution???the right thread,where can i find it???please help me,cuz im totally newbie to this android and also this site....
There are two search boxes on the upper right at the top of the forum. Type the device's name, e.g. Samsung Galaxy SIII into the left box to find the forum for your device. The search box on the right is for searching for topics in all forums.
SOLUTION?
Did anyone come up with a solution here??
Hi everyone! I'm new with motorola, and i'm not used to the utilities and terms you use here, so I need a little help to install a ROM if you don't mind I have searched through the forums and what I have finally understood is the following, please correct me if I am wrong at anything, I wouldn't like to brick my phone at the first day lol
I would like a rom with the stock interface of android from google (the most similar to nexus stile), and searching through the forums I have found this wich seems to be really nice: http://forum.xda-developers.com/showthread.php?t=1734893
Now I am at gingerbread (ICS blocked from mobile company -.-), and as it is said in the thread to install it I need to be on ICS (Latam) allready, so I think that first I need to flash this: http://forum.xda-developers.com/showthread.php?t=1753383
This needs to be flashed through RSD lite with the phone turned on, doesn't it? with the USB debugging enabled, and media sync? Then I run RSD lite and just open the xml file...
and to instal the rom from epsilon project, it is said in the thread that it has to be done through some kind of "BootMenu Recovery", and with a full wipe. What is that BootMenu Recovery? I have searched and I have found a touch CWM based recovery for Razr and the "Bootstrap recovery". Is this BootMenu Recovery mentioned in the thread the generic name for both of them so I can use any? Or is it a different recovery?
I hope you can help me with my questions, I know they are really noob but I am new to motorola and I don't understand much from this forums. Anyway as you can see I have tried to search before making stupid questions. Thanks in advance to anyone wanting to help, and of course for all the devs from XDA that make our lives a little easier
Ok, i first tried flashing the Latam firmware, and I got a failure message from rsd lite. I tried several times, and allways the same. I attached a picture showing it. Any idea of what I'm doing wrong? does the bootloader need to be unlocked or the phone to be sim-unlocked to flash firmwares through RSD lite as in other phones? thanks in advance
Sorry, forgot screenshot, here it is
Your razr is not a latam device. You can't install the retail.br .
Where did you bought ur razr or whar's ur current system version?
Cheers
Sent from my XT910 using xda premium
pedrotorresfilho said:
Your razr is not a latam device. You can't install the retail.br .
Where did you bought ur razr or whar's ur current system version?
Cheers
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
Thanks for the response! My razr is from spain, now I've got 561.167.21.XT910.YOIGO.en.ES
I guess I have to install some european version. Cheers!
danygarss said:
Thanks for the response! My razr is from spain, now I've got 561.167.21.XT910.YOIGO.en.ES
I guess I have to install some european version. Cheers!
Click to expand...
Click to collapse
Hi
This is the one you need. http://forum.xda-developers.com/showthread.php?t=1747800
Cheers
Sent from my XT910 using xda premium
pedrotorresfilho said:
Hi
This is the one you need. http://forum.xda-developers.com/showthread.php?t=1747800
Cheers
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
huge thanks!!! it worked!!
Hi ive just got message from my friend asking if i could help his friend with takeing back to life his galaxy s2.
As i know he tried to remove simlock, but after this he brick his phone. I know that is hard to know what is wrong from this small description, but i know that he "broke his galaxy s2"
He is getting on phone:
Step 1
error not saved
You have busybox problem, fix it or if you have plugged your phone on ypur computer, unplug it
Click to expand...
Click to collapse
Or similar. Im third, so there can be some mistakes.
Its sth with busybox, but i dont know what.
Maybe we need only to install busybox or reflash soft? Or its permanent and only service helps?
Sent using tf300t - stock JellyBean (docked/nonrooted)
Why dont you reflash firmware? A fresh install?
Sent from my iPhone using Tapatalk
unfortunately you have given little and vague information.
What rom is he running ?
Can he getinto recovery or download mode ?
If he can get into one of these 2 modes, then a simple reflash may solve the problem.
If he cannot get into these modes, then you may need to send it in for repair.
He didn't mess with the EFS folder, did he?
Sent from the little guy
Odp: Brick after simlock
I dont know to much too.
He is using stock ics firmware as "normal" user.
And u gave me an answer that firmware reflash can hel. Thanks. We will try it
EDIT: Ok friends friend dont want to wait and gave device to service paying 60pln (~15€, ~20$) for reflash and it helped.
Sent using tf300t - stock JellyBean (docked/nonrooted)
I hard bricked my galaxy that I only had for 5 days, It was stock rom and i tried to install boleffa kernel 5.x.x , Can someone help me get out of this, I really need my phone to use. Please help ASAP
swungspeedz said:
I hard bricked my galaxy that I only had for 5 days, It was stock rom and i tried to install boleffa kernel 5.x.x , Can someone help me get out of this, I really need my phone to use. Please help ASAP
Click to expand...
Click to collapse
More information is needed for people to help you.. What did you do exactly (how you tried to install etc) and what are the symptoms.
tallman43 said:
More information is needed for people to help you.. What did you do exactly (how you tried to install etc) and what are the symptoms.
Click to expand...
Click to collapse
I tried flashing a kernel through CWM running on JB 4.3 stocked rooted, just got the phone a week ago. Nothing will work, no recovery, no download, I tried using Win32 disk img flasher, didn't work.
I green!
Without download mode you will need a usb jig or jtag. Sounds like you probably flashed the wrong file to get that effect, in which case you do have a hard brick.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
Without download mode you will need a usb jig or jtag. Sounds like you probably flashed the wrong file to get that effect, in which case you do have a hard brick.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I have to take it back to the shop to replace it, and this sucks i never bricked my zte sequent this bad and i did some pretty bad things to it. I only had this phone for a week and this happened. Im just going to root it and be done.