Related
Hi,
so kernel sources are released. Is there any fix for hero's wifi problems? I mean dropping connection to AP. It is so annoying, I tried to do everything: change channel, mode, encryption... Nothing helped. It is Linksys wrt160nl. The same applies to other networks (some public hot spots).
I never had this problem with my Linksys WRT54GL...
mopodo said:
I never had this problem with my Linksys WRT54GL...
Click to expand...
Click to collapse
Could you paste your wifi settings? (mode, encryption mode, channel)
Using the Modaco custom ROM 2.8 (never had problems with modaco ROM and generic)
Router: Linksys WRT54GL running Tomato 1.25 firmware
Wireless Mode: Access Point
B/G Mode: Mixed
Channel: 1 - 2.412 Ghz (try a free one)
Security: WPA / WPA2 Personal
Encryption: AES
Group Key Renewal: 3600 seconds
No Mac Filter
Under Advanced Settings I changed "Transmit Power" to 251mW for a better signal, the rest are default values.
Try to update your router firmware
Are you alone with this problem?
greetz
In case you haven't done so yet. Check out the Wifi Sleep Policy (access by pressing menu when you are in wifi menu). Normally the Wifi is turned off then the screen is turned off which can cause problem.
Similar problem with netgear wnr2000
mopodo said:
Using the Modaco custom ROM 2.8 (never had problems with modaco ROM and generic)
Router: Linksys WRT54GL running Tomato 1.25 firmware
Wireless Mode: Access Point
B/G Mode: Mixed
Channel: 1 - 2.412 Ghz (try a free one)
Security: WPA / WPA2 Personal
Encryption: AES
Group Key Renewal: 3600 seconds
No Mac Filter
Under Advanced Settings I changed "Transmit Power" to 251mW for a better signal, the rest are default values.
Try to update your router firmware
Are you alone with this problem?
greetz
Click to expand...
Click to collapse
Hi got similar problem with my router netgear wnr2000.what i found funny is that when i reset the router, the phone connects perfectly to the router, but after abt 24hrs or so, it fails to connect.even if i reboot my phone, or reset the connection on phone.fails to connect.it will only connect when i reboot the router. i will try the 'aes' encryption n see if that helps.will update if it works
Thanks for your replies. Please could other members share their experiences, used options and solutions. This issue is too common to simply forget it. I am trying to find some kind of pattern or special options, it requires.
i dont have a problem with wifi apart from the wont find or connect to n-range device other wise i use wifi all the time it never drops, on stock orange uk firmware
I have a Sitecom WL-173 router.
I cannot connect at all. I can, but only with no or WEP security. That is no option for me.
When I use WPA or WPA2 my Hero does view my network, but does not connect.
I called HTC about this problem. He told me that they do not support all routers. He could not tell me which they support and which not.
mopodo said:
B/G Mode: Mixed
Click to expand...
Click to collapse
I also have the same problem. The way to solve it is to change the above setting to 'G' only. Not mixed/Hybrid.
Cheers!
I have not had any problems trying to connect to WiFi networks, until i went over to my mates place where he has the Virgin 50MB B-Band and also a D-Link wifi-N router, and my Hero could no see the network at all, even though his iPhone connected straight away.
markoc84 said:
..., even though his iPhone connected straight away.
Click to expand...
Click to collapse
Augghhhhh... that hurts. Please, do not curse in this forum
tembares said:
Augghhhhh... that hurts. Please, do not curse in this forum
Click to expand...
Click to collapse
I'm sorry, it hurt even more when i was sitting there pissed off that my Hero wouldnt connect to the Wifi!!!
I have Virgin 50meg at home no problem at all, went to my GF's who has basic Virgin cable 10meg on netgear G and would not connect at all.
No idea why, as it should be all fine!
I have the same problem. It is so ****in annoying. My router is a Linksys WRT54G with Tomato firmware v1.25. Router is in "G only mode", WPA-2 PSK-AES security, I've set a static local IP for the phone, the phone's wireless is set to always ON... I basically tried everything I could think of. Ended up rooting the phone and installing Modaco 2.9... but didn't change anything. The only way I can get it work again when it drops is shut the Wi-Fi off then on...
Worst of all this is the problem seems widespread (but not universal)... What the **** does HTC think putting a ****in smartphone on the market with defective Wi-Fi... This is non-sense.
I really hope someone comes up with a fix or HTC updates this... otherwise we might want to start thinkin bout class action.
[email protected] said:
I also have the same problem. The way to solve it is to change the above setting to 'G' only. Not mixed/Hybrid.
Cheers!
Click to expand...
Click to collapse
Is it a router setup or a Hero setting?
Pleaes explain if it's one of the options
probs here too ...
Linksys WAP54G v3.1
vs
HTC Hero
was working perfectly for first month or so, but has been getting worse and worse. ie, for a few weeks it would see the wifi but would usually fail to connect. now I'm lucky if it can see it at all!
have reflashed the wap with dd-wrt and experimented with a lot of settings. no diff.
have reflashed the hero with hero21 comunitry v1.6. no diff. (and also latest radio)
it just starts and stops when it feels like it.
oh, and my eeepc works fine on the same wifi, so I know it's not some wap screw up.
tried every tip I can find like 'use mixed mode' or 'g only', etc etc.
I am starting to think it's a hardware fault?
Same problem
Siemens Gigaset Tiscali modem with wpa psk2 tkip and T-mobile hero rom.
Sees the modem and connects with security first time but then says 'remembered out of range' on wifi settings but interestingly in wifi buddy it constantly has the syncing symbol next to the network.
Really annoying.
I've tried WEP and security off, wireless g only etc etc.
I have problems too but seems different to yours... but who knows : in fact i can't connect to wifi when the SSID is masked. Even if - or course - i put manuualy the ssid before with the good wep key. It happens on a livebox ( orange box )... but if i press the button to show the wifi network - it has to be made when you connect a device for the first time on this box - then it connects to the network... else it tells me that the network is out of range...
So does the wifi on hero has problem with masked SSID ? To compare i never had this problem - on the same box - with the touch diamond and the touch hd... and at home, not masking the ssid, the connection is ok without doing anything.
Ciao
Fred
I had the same problem with a Zyxel 660 router. I was able to connect to the wifi (WPA/PSK enable) but there was no data transfer possible.
So I updated the Radio ROM to the 63.18.55.06JU_6.35.08.29 version and it solved the problem.
hello
i was so looking forward to getting my new x10 mini pro only to find a few faults some of which i can live with until 2.1 comes out (should really be 2.2 & sooner) but i cannt seem to connect to my wireless router.
i have tried several different methods, including going through all the wireless channels on the router, enable mac address filter and have only my x10 set, try all the differents security settings - but still i cannot get my phone to obtain an ip address before it gives me the unsuccessful message.
so went to mcdonalds tried their openzone and connected fine to their network.
now my next guess would be is my router is old (about 4 years maybe more) linksys WRT54GS so anyone know of any problems with specific routers at all?
i know i had problems setting up my godsons ipod touch with my router, but didnt dig any deeper on it as he wasnt fussed about it at the time - so think it could be that but will hold off rushing out to get a new router for a while yet, probably to test some other peoples routers first.
Is you SSID hidden?
I have found that on some routers, Android phones in general won't connect if the SSID is hidden.
clarkee013 said:
hello
i was so looking forward to getting my new x10 mini pro only to find a few faults some of which i can live with until 2.1 comes out (should really be 2.2 & sooner) but i cannt seem to connect to my wireless router.
i have tried several different methods, including going through all the wireless channels on the router, enable mac address filter and have only my x10 set, try all the differents security settings - but still i cannot get my phone to obtain an ip address before it gives me the unsuccessful message.
so went to mcdonalds tried their openzone and connected fine to their network.
now my next guess would be is my router is old (about 4 years maybe more) linksys WRT54GS so anyone know of any problems with specific routers at all?
i know i had problems setting up my godsons ipod touch with my router, but didnt dig any deeper on it as he wasnt fussed about it at the time - so think it could be that but will hold off rushing out to get a new router for a while yet, probably to test some other peoples routers first.
Click to expand...
Click to collapse
The WRT54GS should be a perfect router to use.
Make sure you are running latest dd-wrt firmware on it, setup wifi security as : WPA2 Personal Mixed, TKIP+AES
I have these settings and phone connects easily.
Its a good router, do as above poster advised and definitely get latest firmware on. Try going on just G mode if there's no B-only old wifi gadgets in your house.
Sent from my U20i using XDA App
I noticed my wife's X10 mini won't connect to Channels 12 and 13. If your router is on one of those channels, try moving it to 11.
I have difficulties connecting to my wifi router at home, SMC Barricade N2, WPA2 authentication, it works only after resetting the router.
Now after turning off TKIP cypher suite (only AES), it works perfectly
update: and also helped to enable static IP... but I am using wifi only @home
Had the same problem. Changed to Channels 11 and detected imediatly my wifi network.
Hi, I have a different problem with the wifi.
At work and some other connections I've seen to have an open wifi, which i can freely connect.
However, I am still unable to browse the internet as it requires some browser authentication.
I've seen other fones (Nokia and Iphone) have their browsers popup a webpage to input the credentials.
but my mini pro doesn't display this page.
i've already tried going directly to the login url manually but still doesn't display the login page.
someone told me that this might be a limitation of android but haven't seen any reports about it...
i also saw and tried 2 apps (Open Wifi Login and Browser Wifi Login) that should have solved this but did not.
Has anyone else had this experience?
Help please....
shameless self-bump
other fones seem to have the same issue but no solution...
http://forum.xda-developers.com/showthread.php?t=622326
help please
I have a home network at house A (our house) with linksys and internet access.
I am remodeling house B and do not have a network set up at house B yet, also no internet wiring yet and no modem or router yet.
I would like to take my Windows 7 Laptop and G Tablet (stock rom) to house B and connect them together by WiFi but without the Network and Internet access set up yet.
So, no linksys at house B, no WEP, no accounts, no internet.
I want to run home automation (X10) with a CM15A computer interface connected to the laptop with laptop and G Tablet running Autom8.
The G Tablet will be handy while locating the X 10 modules around the house.
The laptop will be plugged into AC outlet and connected to CM15A or CM19A X10 module.
I think there is a program to run on Windows 7 to set up ad hoc wifi but I can't find the post that I think pertains to this type of set up.
If anyone has done this, and can offer some help, thanks for your reply!
Connectify will setup a wifi connection between the two, if thats all ur looking for. Its meant to share a connection between two systems but ive used it for what ur looking for too. Hope this helps
I have an adhoc with my Win7 laptop.... Heres what I did....
Go to Network and Sharing Center (right click network icon by clock)
Choose Setup a new connection or network
at the bottom of the list, pick Set up a wireless adhoc
Enter your information and your good to go.
Hope this helps ya. I know my droid x had issues connecting to adhoc networks... im not sure if its an issue with android or motorola, but just wanted to let you know.
hello guys sorry if this is the wrong place to post for this but ive been using xda for a little while now and its been a great help thanks to all those smart guys n gals out there helpin the cause, i most appreciate it, but ive now got stumped in getting my bluetooth to enable heres what i got.
-x10a with 2.2.1 os
-rooted
-titanium backup superuser ect.. all working right
-also use xrecovery
what happens is i want to use the wii remote with my emulators and it say no such device (bluetooth) so i try to enable it and it trys but just turns back off.
could anyone help with this issue thanks
can you use other BT devices?
You have to get an app like RWiimote if you are rooted or Wiimote Controller if you are not. Then configure the buttons in the emulator's settings.
Sent from my X10a using XDA App
Frequent wireless disconnections from the router/AP (Access Point).
Symptom
Not able to connect to the router/AP wirelessly, or intermittent wireless connection.
Resolution
To address this issue, follow the steps below:
Note : The steps below are applicable only for Belkin routers. 1.Open an Internet Explorer window on your computer and type in http://192.168.2.1 in the address bar. This will take you to the Belkin router's web based configuration page. If you are not able to open the page click here.
2.You will get a login page. Leave the password blank. Click Submit .
3.On the left side of the page, click Channel and SSID below Wireless .
4.The wireless channel on the Belkin router is set to Auto by defualt. Change the wireless to a static channel. Click Apply Changes .
5.Click Logout in the top right hand corner.
Note: The wireless card in the computer will automatically detect the change in channel number on the router and will update the channel on the card.
Cause
You are not able to connect wirelessly mainly due to environmental interference. When the wireless channel is set to auto, the router will cycle to though channels when it detects significant interference. When the router changes channel the wireless connection will reset itself and disconnect all wireless clients connected to the router.
Summary
Wireless signals are prone to interference from cordless phones and electrical appliances (e.g., vacuum cleaners, microwave ovens). This is the reason wireless connections can drop. This article explains how to overcome frequent wireless disconnections by changing the channel number (frequency) on the Belkin router
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
In my case the problem was with frozen "WiFi sharing" in combination with juicy defenders "Location" fearure. It seems such combination is dangerous. Solutin (in my case):
1. defroze
2. remove all wifi networks
3. reboot (for "clean" frozing)
4. make WiFi sharing frozen
5. reboot again just for fun
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
as above, check that there is no MAC filtering set up.
one other thing it may be is the security settings, if you have a WEP Key to access the router it may need the Hex conversion of your key depending on what level of security you have (64bit or 128bit for example)
shantanu_d said:
hi,
I've linksys wi-fi router model WRT54GH in my home & it has a good amount of signal strength to cover entire area.
My recently bought galaxy S2 is able to identify linksys wi-fi access point & connects too with the IP assigned to it, also at wi-fi settings connected being displayed.
Now when I try to access Internet (any url google/FB), it doesn't connect at all.
I tried almost everything about router configuration, restart etc. but with no success
can someone plz help on this ?
Click to expand...
Click to collapse
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
I have a similar problem and I fix mine temporarily by turning my wifi off, then in wifi settings > advanced, I change wifi sleep policy from 'never' to 'only when the screen is off'. However I have to do this every time I want to use wifi so it can become quite annoying sometimes.
So I can get through however only for a short period of time as it seems as long my Galaxy S2 keeps turning off my wifi even though it's on :/
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
SiSL said:
Try to check your router's MAC address restrictions. In my router, as security, I have to add MAC addresses of each device to share internet. They take IP's, connects etc. but does not have accesses to internet
Click to expand...
Click to collapse
Thanks for the suggestion but MAC restriction is already disabled at router
Robsso said:
I had exactly the same issue on Linksys E4200 with my laptop, could connect to network, even to router's attached storage, but not to internet. Restart helped
On SGS2, I couldn't connect to the router at all at first, but fixed this by switching from WPA2/WPA mixed mode access protocol to WPA2 private. But I guess this is not exactly your issue.
Click to expand...
Click to collapse
Yes, you are right this is not an issue for me.
In fact my SG2 being assigned with an IP address from 192.168.1.xx subnet.
Also at a same time my laptop connected with an IP from same subnet able to ping SG2.
OccasionalDroid said:
Try setting up a static IP address for your phone, I presume your network is a 192.168.1.0, go into router settings and LAN setup, give your phone the address in a static DHCP assignment of 192.168.1.5, or any other address in the same subnet your in. Some SGSII's have problems with dynamic DHCP for some reason, some NS had the same problem too,
Sent from my Sammy Galactic S2 Beastly Device
Click to expand...
Click to collapse
My SG2 being assigned with an IP address from 192.168.1.xx subnet.
So I think IP addressing may not be an issue.
Also another thing I tried was, at a same time my laptop connected with an IP from same subnet able to ping SG2.
So wi-fi router may not be an issue here, whats say ???
Even I am facing the same issue at my office network. I am able to connect to the wireless network but if I try to access any app I cannot browse. This is really frustrating looks like some issue with the modem drivers.
I was able to browse on another wifi created virtually by mobile tethering. This looks like a major bug with the current firmware. Another interesting thing to note is that the Wifi network has a hidden SSID and uses WPA2 auth scheme.
I have seen a Galaxy S able to connect to the same n/w without any issues.
Has anyone figured out a solution to this one ?
Hi, thanks for your reply.
I am yet to figure out a solution for this
Even I am also agree on the probable issue with modem driver.
I've D-link modem.
Are you aware of anything about this modem that can be reconfigured to get this worked ... ?? pl let me know
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
I'm having the same problem at work connecting my SGS2 with v2.3.3 Official Firmware (customized for Orange service provider) to a Cisco Aironet 1130 AP. I can see that the Galaxy authenticates with the AP correctly and gets IP from the DHCP server, but it cannot send or receive any traffic, although the phone stays connected and authenticated. At home, I use an Atheros based Fonera with DD-WRT without any problem.
As I'm the company's network administrator, I will try to further investigate this problem, but it seems like some kind of incompatibility between the devices or misconfiguration ....
Basuk said:
The wifi router at my office is Cisco Aironet 1200 Series, anyone else facing this issue ?
Click to expand...
Click to collapse
try turn off the wifi, turn off the mobile data and turn on the wifi again
It seems the SGS2 sometimes has problems with DNS.
Try a static IP and use 8.8.8.8 as second DNS server, which is a free Google DNS server.
This fixed MY problems
I rooted my SGS2 and voila wifi worked at my office finally I have been able to find a solution.. love my SGS2 the Beast...
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
ETA:
I can connect to hotspots (DHCP) and at home (Have to set it to static tho)
No internet
AP works - Laptop and i8910 (had to set static and advanced settigs etc). I've rebooted it a few times, set DHCP on and off. DHCP seems to be running on the router
viqles said:
I'm having this same problem..
I think I've tried all the solutions above, but one (Sorry - noob question):
Rooted?
is there a firmware patch or something that I should know about?
Anyone got any other ideas?
Click to expand...
Click to collapse
This is an issue with SGS2 with wifi server using authentication protocol TPIK, if you use AES as encryption then it will work without any issues.
That should be a setting in my AP? I can't see it...
If I get a new non-crappy AP is that likely to solve my problem?
ETA:
Ah - that's a WPA thing? Mine only seems to do WEP - is that right?