After hard bricking my phone.. I learned a lesson.. Whenever your flashing stock rom through KDZ or LGMDP or whenever you're in emergency mode..
NEVER REMOVE THE BATTERY WHEN YOUR PHONE IS IN EMERGENCY MODE..!!!
Do anything but don't ever remove the battery!
It will hard brick your phone.. You will have to JTAG it or change the PCB mainboard (which is costly)..!!
I request MODERATORS to sticky this please! So that no user bricks his phone after this!
I always use LGMDP with phone in emergency mode and i have done that sometimes and never bricked phone plus it reboots phone when done only if you dont let finish the work the only thing that soft bricked my phone once was LG offical updater, have you taken phone to warranty and say that phone bricked while using their updater if you have warranty they fix it for free
Sent from my LG-P500 using xda app-developers app
My phone is with LG.. they are replacing the mainboard
dhruv.always said:
My phone is with LG.. they are replacing the mainboard
Click to expand...
Click to collapse
Good good i think kdz is a phone killer
http://forum.xda-developers.com/showthread.php?t=1793031
If users use lgmdp like the way above there will be no bricks..
Sent from my LG-P500 using xda app-developers app
dhruv.always said:
After hard bricking my phone.. I learned a lesson.. Whenever your flashing stock rom through KDZ or LGMDP or whenever you're in emergency mode..
NEVER REMOVE THE BATTERY WHEN YOUR PHONE IS IN EMERGENCY MODE..!!!
Do anything but don't ever remove the battery!
It will hard brick your phone.. You will have to JTAG it or change the PCB mainboard (which is costly)..!!
I request MODERATORS to sticky this please! So that no user bricks his phone after this!
Click to expand...
Click to collapse
As i have read post by someone on xda if im not mistaken, he said to charge the battery at least 80% before using emergency mode. So its mean will get the problem if battery die before you done the progress... so i never tried to remove the battery also...
Really good information i though..
Sent from my LG-P500
dhruv.always said:
After hard bricking my phone.. I learned a lesson.. Whenever your flashing stock rom through KDZ or LGMDP or whenever you're in emergency mode..
NEVER REMOVE THE BATTERY WHEN YOUR PHONE IS IN EMERGENCY MODE..!!!
Do anything but don't ever remove the battery!
It will hard brick your phone.. You will have to JTAG it or change the PCB mainboard (which is costly)..!!
I request MODERATORS to sticky this please! So that no user bricks his phone after this!
Click to expand...
Click to collapse
What are we supposed to in emergency mode if are u not able to fix the phone and u want to turn it off!!!!!!!
Sent from my LG-P500 using xda app-developers app
We already new that..
Sent from my LG-P500 using Tapatalk 2
dnle71 said:
We already new that..
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
the more the better. there is nothing wrong with saying it more. there might be new users who didn't know this yet
---------- Post added at 09:35 PM ---------- Previous post was at 09:33 PM ----------
dhruv.always said:
After hard bricking my phone.. I learned a lesson.. Whenever your flashing stock rom through KDZ or LGMDP or whenever you're in emergency mode..
NEVER REMOVE THE BATTERY WHEN YOUR PHONE IS IN EMERGENCY MODE..!!!
Do anything but don't ever remove the battery!
It will hard brick your phone.. You will have to JTAG it or change the PCB mainboard (which is costly)..!!
I request MODERATORS to sticky this please! So that no user bricks his phone after this!
Click to expand...
Click to collapse
LEMME CLARIFY
if kdz isn't in progress. lets say it isn't plugged in to a computer then taking out be batter is ok
BUT ONCE IT IS CONNECTED TO A COMPUTER AND KDZ ALREADY STARTED, THEN DO NOT UNPLUG IT, OR TAKE THE BATTERY OUT
-DarkKnight- said:
the more the better. there is nothing wrong with saying it more. there might be new users who didn't know this yet
---------- Post added at 09:35 PM ---------- Previous post was at 09:33 PM ----------
LEMME CLARIFY
if kdz isn't in progress. lets say it isn't plugged in to a computer then taking out be batter is ok
BUT ONCE IT IS CONNECTED TO A COMPUTER AND KDZ ALREADY STARTED, THEN DO NOT UNPLUG IT, OR TAKE THE BATTERY OUT
Click to expand...
Click to collapse
Tried it 15 times. My phone never got bricked. Depends on your luck I guess :/
Sent from my LG-P500 using xda premium
allenwalker1998 said:
Tried it 15 times. My phone never got bricked. Depends on your luck I guess :/
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Sadly phone got bricked
Sent from my LG-P500 using xda premium
Bad experience myself,when first using LGDMP. I did exactly what is mentioned as the topic..I got frustrated because of the program stalling so I removed the battery and well had a shiny brick of a phone..I have never used KDZ ( thank god)..funny thing is in that picture tutorial it does say do not remove battery while in E.Mode...but c'mon were all men here and to smart to read directions..LMAO..anyways about JTAG,it would cost more to do that than the USA retail price,you might as well use that money to get a better phone or a hooker for the night
Sent from my LG-P500 using xda premium
Well, i'm the latest victim. KDZ failed for the first time in 50 flashes and I cant flash anything anymore (LGDMP etc etc), only way is to remove battery which woohoo! A hard brick.....
Cresqo said:
Well, i'm the latest victim. KDZ failed for the first time in 50 flashes and I cant flash anything anymore (LGDMP etc etc), only way is to remove battery which woohoo! A hard brick.....
Click to expand...
Click to collapse
just disconect cable withot take battery and use LGMDP.
change the title to dont use KDZ.
so many phones bricked in a week...
Changed! All of you please ask the moderators to sticky this thread! Pls we will save many users! Pls!
dhruv.always said:
Changed! All of you please ask the moderators to sticky this thread! Pls we will save many users! Pls!
Click to expand...
Click to collapse
I have already given this thread a sticky
YZ.
@OP, wouldn't the same apply to KP500 utility????
I just got my phone back from service center. now i'm charging it to see if i can root it.
dhruv.always said:
I just got my phone back from service center. now i'm charging it to see if i can root it.
Click to expand...
Click to collapse
I can't wait for mine ^_^ said maybe this week
call them everyday.. otherwise they wont do it
Related
I believe I may have a soft brick on my SGS II. I had updated my CM9 to the latest in the thread and started to have a few problems. I had my phone overheat and die on me one time and take forever to charge back up. It originally had a yellow triangle next to the battery. After several hours of charging it booted up and I was able to use my phone again. I had never had an issue with CM9 before this and since this day, I had many outstanding issues with it.
As of last night I have had a soft brick I am assuming. But it doesn't seem to be recoverable either. Which is insanely strange. I had flashed many stock firmware and firmware files in Odin but can't see to get the phone to boot bast the AT&T Rethink Possible screen. It's been sitting for two days like this and I can only get to this screen after I have flashed something in Download mode. (doesn't matter, as long as odin resets device I get here) tried repartitioning, flashing stock modem, flashing stock rom in the how to get your device ready to be replaced thread, flashed kernels, flash stock PARAM. and I have got nothing.
Anyway to tell if my phone is saveable? I have the download counter set back to 0 so if push comes to shove i can try to get a new phone from at&t on tuesday.
But i'd really like to see my phone get fixed, the experience is good. Hopefully we can figure this out. All I can get access to is Download mode so recovery is pretty much out of the question.
Any advice guys? Google has done me no good.
Flash a rooted, cwm kernel through Odin, reboot into recovery, flash a rom.
^ that method has never failed me.
Also, when using Odin, use the USB ports on the back of your computer!
Sent from my SGH-I777 using xda premium
trell959 said:
Flash a rooted, cwm kernel through Odin, reboot into recovery, flash a rom.
^ that method has never failed me.
Also, when using Odin, use the USB ports on the back of your computer!
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
This.
Be careful, I have noticed that Odin acts like a ***** when you talk him about extended usb ports.
Reboot your pc, strange as it seems that can fix a lot of ODIN problems.
Does ODIN like x64 based systems?
ryude said:
Reboot your pc, strange as it seems that can fix a lot of ODIN problems.
Click to expand...
Click to collapse
I am running ODIN on an x64 based laptop. it has worked flawlessly until now! I have a soft bricked I777 also so I'm watching this thread for any good stuff to try.
My odin freezes right at the beginning of the FACTORYFS.img push.
It just sits and sits and sits. Drains the battery also.
I'm gonna go try a CWM kernel to see if that will help. My issue I think is the partitions are screwed somehow.
I can't flash back to factory standard because I had JB on my I777 and the flashes are getting stopped up by the partitions.
thanks for the input ...
I never thought of flashing just a kernel! DUHHH...
MWTTRON said:
I am running ODIN on an x64 based laptop. it has worked flawlessly until now! I have a soft bricked I777 also so I'm watching this thread for any good stuff to try.
My odin freezes right at the beginning of the FACTORYFS.img push.
It just sits and sits and sits. Drains the battery also.
I'm gonna go try a CWM kernel to see if that will help. My issue I think is the partitions are screwed somehow.
I can't flash back to factory standard because I had JB on my I777 and the flashes are getting stopped up by the partitions.
thanks for the input ...
I never thought of flashing just a kernel! DUHHH...
Click to expand...
Click to collapse
Next time please don't necro a thread if you figured out your problem.
Sent from my Zanpakuto using Getsuga Tensho!
Did Not NECRO anything!
Nick281051 said:
Next time please don't necro a thread if you figured out your problem.
Sent from my Zanpakuto using Getsuga Tensho!
Click to expand...
Click to collapse
I simply realized there was something I didn't try!
Why are you people so UPTIGHT!!!
The simple fact that NOTHING save a PIT file is able to be written to my phone is the ISSUE here!
So no the Kernal did NOT work. I cannot flash a ROM either as they are all .zips requiring me to have access to my phone. Obviously there is no solution at least on this site! All you people can do is criticize! Does that REALLY make you feel superior?
How about FIXING something? Give me some text I can use!
Thank You
MWTTRON said:
I simply realized there was something I didn't try!
Why are you people so UPTIGHT!!!
The simple fact that NOTHING save a PIT file is able to be written to my phone is the ISSUE here!
So no the Kernal did NOT work. I cannot flash a ROM either as they are all .zips requiring me to have access to my phone. Obviously there is no solution at least on this site! All you people can do is criticize! Does that REALLY make you feel superior?
How about FIXING something? Give me some text I can use!
Thank You
Click to expand...
Click to collapse
I'm not even going to dignify that with a response, because of an attitude like that. You're not entitled to anything here.
Sent from my Zanpakuto using Getsuga Tensho!
Thanks for your Supurb HELP!
Nick281051 said:
I'm not even going to dignify that with a response, because of an attitude like that. You're not entitled to anything here.
Sent from my Zanpakuto using Getsuga Tensho!
Click to expand...
Click to collapse
Ya know what Nick28...1, Thank you. Please don't respond and take up my bandwidth with your useless text.
I'll figure it out. Now because of you (Be happy with yourself) it won't get posted here and the other that need the info won't get it from here.
So be proud of yourself. You ... Oh whats the use... Later DUD. I did leave the E off the end on purpose!!!
---------- Post added at 07:45 PM ---------- Previous post was at 07:15 PM ----------
Nick281051 said:
I'm not even going to dignify that with a response, because of an attitude like that. You're not entitled to anything here.
Sent from my Zanpakuto using Getsuga Tensho!
Click to expand...
Click to collapse
Ya know Oh forget it...
I hope you find what you aren't finding. You will be a much better person when you do!
Good Luck!
MWTTRON said:
Ya know what Nick28...1, Thank you. Please don't respond and take up my bandwidth with your useless text.
I'll figure it out. Now because of you (Be happy with yourself) it won't get posted here and the other that need the info won't get it from here.
So be proud of yourself. You ... Oh whats the use... Later DUD. I did leave the E off the end on purpose!!!
---------- Post added at 07:45 PM ---------- Previous post was at 07:15 PM ----------
Ya know Oh forget it...
I hope you find what you aren't finding. You will be a much better person when you do!
Good Luck!
Click to expand...
Click to collapse
Good. We want you to figure it out.
Sent from my CLEAN Note 2
Mine is fixed
brandonarev said:
Good. We want you to figure it out.
Sent from my CLEAN Note 2
Click to expand...
Click to collapse
I used my server which is an x86 based machine and reverted back to V2.3.4.
I have to go through the steps to get back to JB but at least now I have a phone.
So you all couldn't have helped me anyhow!
But thanks for all your help!
It's good to know you are there when you are needed! Yea that is SARCASTIC!
---------- Post added at 11:48 PM ---------- Previous post was at 11:37 PM ----------
trell959 said:
Flash a rooted, cwm kernel through Odin, reboot into recovery, flash a rom.
^ that method has never failed me.
Also, when using Odin, use the USB ports on the back of your computer!
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Trell959 you Biporch and ryude talking about the USB ports and odin being a ***** got me thinking about my computer.
Although I have used my x64 based laptop many times to communicate with my phone for some reason that was exactly what the issue was.
I spent about 15 hours trying to figure out what was wrong with my phones com when it was the USB ports was not 'CLEAN' enough.
I finally moved to my server and plugged into the Main USB ports on it. Low and Behold the First time I was flashing away like a Big Dog!
Arff Arff
I apologize for my childish rants against that Nick guy below. I was frustrated and he offered no help, just naggin! Whatever...
Kudos to you Biporch and ryude!
Whoaaa gezuz man. Look. You necro'd a thread that hasn't seen activity in literally an entire YEAR. It's just against the rules, and considered bad form. Wouldn't it have been more dignified, mature, and positive for the community to have taken this to PM immediately, rather than act like a girl on prom night who just got dumped before the last dance? C'mon now lets all calm down. And let this thread to back to sleeping .
I just hard bricked my At&T Note, I tried using the usb jig and it didn't work out to well for me. I know the jig works, i have used it on my phone and my brothers.
Is there anyone that knows how to Unbrick a dead phone?
Thank you for your help.
Go to mobiletechvideos.com they have a unbricking service for our phone
Sent from my SAMSUNG-SGH-I717 using xda premium
Ok so I found out the only way after Bricking your phone to the point that even a download mode jig cant bring the phone back is doing a jtag
U fixed it yet? Do u realize how hard it is to hard brick? ??? Lol wth u tried doing. ..
Sent from my SAMSUNG-SGH-I717 using xda premium
armyboy11b said:
U fixed it yet? Do u realize how hard it is to hard brick? ??? Lol wth u tried doing. ..
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
+1
Sent from my SAMSUNG-SGH-I717 using xda premium
I bricked my phone thanks to a misinformation on how to flash recovery.img
JIG did not work for me either. the only thing I could do was to drop at an att store and told them the phone is not working. they tried some stuff on it and then gave me a new one instead.
The only thing was that I had it for less than a month.
Moved To Q&A
I hope you sort your problem, but this is not the place to ask questions.
devbro said:
I bricked my phone thanks to a misinformation on how to flash recovery.img
JIG did not work for me either. the only thing I could do was to drop at an att store and told them the phone is not working. they tried some stuff on it and then gave me a new one instead.
The only thing was that I had it for less than a month.
Click to expand...
Click to collapse
lol you're a lucky guy....i had mine for 8 months..i do alot of different androids and was in a hurry dd'n my recovery over n imaged to wrong partition. part4 is the extended..not cool im followin darkspr1te's adventure in unbricking these devices though..i have a linux server too so that helps. for anyone else that stumbles across this thread with a bricked device... http://forum.xda-developers.com/showthread.php?t=1914359&highlight=recovery+wrong+partition&page=2 he's a smart dude, alot of good information. this may work havent asked any questions yet but i may soon...
Does anyone have any experience with jtag and unbricking? I ask because after bricking two phones, a third probably won't go over so well with the warranty dept. I'm willing to pick up a jtag jig so that I can keep developing but I'd like to pick the brain of someone with experience in this area before I do so. Possibly someone with the hardware already whose willing to soft brick and attempt a recovery. I know its a lot to ask but if we have
a definite way to unbrick we can really go at it. Plus I'd be willing to use the jig I pick up to attempt unbricking for others if they soft brick while devving.
Sent from my ADR6300 using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1618429
Sent from my ADR6425LVW using xda app-developers app
I saw that thread but he never posted whether or not he was successful
Sent from my ADR6300 using xda app-developers app
Don't tell me you bricked your rezound....
Sent from my ADR6425LVW using Tapatalk 2
---------- Post added at 09:31 AM ---------- Previous post was at 09:28 AM ----------
Evocm7 said:
Don't tell me you bricked your rezound.... would be awesome if there was a way to unbrick. I'm going to search on this a bit.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Sent from my ADR6425LVW using Tapatalk 2
did you try to get you rezound into "download" mode? i know there was another member that could unbrick it if you could get into that mode. when i bricked i couldnt get it to work. but maybe your brick was a different type then mine
synisterwolf said:
did you try to get you rezound into "download" mode? i know there was another member that could unbrick it if you could get into that mode. when i bricked i couldnt get it to work. but maybe your brick was a different type then mine
Click to expand...
Click to collapse
qhusb_dload? I tried by doing the wire trick (like for s-off). I figured if I could get that I'd be able to recover but it wasn't working for me. Is there another way?
Right now I get no indication that the phone has any signs of life, no power on at all and not even a charge led. I have another one on its way but I really don't want to try for three strikes. I'm thinking I'm going to stay s-on for devving. It should be harder to brick then.
chad0989 said:
qhusb_dload? I tried by doing the wire trick (like for s-off). I figured if I could get that I'd be able to recover but it wasn't working for me. Is there another way?
Right now I get no indication that the phone has any signs of life, no power on at all and not even a charge led. I have another one on its way but I really don't want to try for three strikes. I'm thinking I'm going to stay s-on for devving. It should be harder to brick then.
Click to expand...
Click to collapse
This is the exact reason I never s-off'd. I don't need the smallest mistake to cost me a phone. With all of the aroma installers, it doesn't really seem necessary.
chad0989 said:
Does anyone have any experience with jtag and unbricking?
Click to expand...
Click to collapse
I've done similar stuff with routers.. not phones, but I imagine it's the same idea.
tcpsyn on gchat.
MajikUF said:
This is the exact reason I never s-off'd. I don't need the smallest mistake to cost me a phone. With all of the aroma installers, it doesn't really seem necessary.
Click to expand...
Click to collapse
You do know he's been working on cm9 to bring to us right?
Sent from my ADR6425LVW using xda premium
chad0989 said:
qhusb_dload? I tried by doing the wire trick (like for s-off). I figured if I could get that I'd be able to recover but it wasn't working for me. Is there another way?
Right now I get no indication that the phone has any signs of life, no power on at all and not even a charge led. I have another one on its way but I really don't want to try for three strikes. I'm thinking I'm going to stay s-on for devving. It should be harder to brick then.
Click to expand...
Click to collapse
yep thats the one. if you could get it into download mode then you can flash a stock recovery and stock hboot back on. but like you said, there was no life at all. it sounds like you did what i did. :/
i dont think you need to worry about how many you are RMA'ing. im on my 3rd now. 2 HW failure and this one has a bad screen.
synisterwolf said:
did you try to get you rezound into "download" mode? i know there was another member that could unbrick it if you could get into that mode. when i bricked i couldnt get it to work. but maybe your brick was a different type then mine
Click to expand...
Click to collapse
Wasn't the whole purpose of the "wire trick" that we used for S-OFF for forcing the phone into download mode?
**edit**
oops didn't read the whole discussion. My bad
synisterwolf said:
yep thats the one. if you could get it into download mode then you can flash a stock recovery and stock hboot back on. but like you said, there was no life at all. it sounds like you did what i did. :/
i dont think you need to worry about how many you are RMA'ing. im on my 3rd now. 2 HW failure and this one has a bad screen.
Click to expand...
Click to collapse
It would still be nice to have a solid way of unbricking. If I keep sending them back with the same exact problem I feel they would get suspicious eventually. Plus the new one I just got is pretty flawless so far, no dead pixels or anything so I'd like to keep it.
I have a new CM build sitting here right now that I'm terrified to try. Haha. So if you're uh sending the one with the bad screen back and want to try a couple things out first...
Yea that would be sick if we could get this to work. Probably, to find a JTAG/Uart port, we would have to take the board out of the device. I don't really wanna do it to mine since I wouldn't know how to put it back together
chad0989 said:
It would still be nice to have a solid way of unbricking. Plus if they keep coming back with the same exact problem I feel they would get suspicious eventually.
I have a new CM build sitting here right now that I'm terrified to try. Haha. So if you're uh sending the one with the bad screen back and want to try a couple things out first...
Click to expand...
Click to collapse
If you go S-On it should fix the bricking. Atleast that's what JonMan said lol
dmeadows013 said:
If you go S-On it should fix the bricking. Atleast that's what JonMan said lol
Click to expand...
Click to collapse
I concluded that also, since whatever partition is getting corrupted won't be able to be written to. But I haven't had the guts to try it again yet.
How about it with your new one and let me know. Haha. I'm already two bricks in.
chad0989 said:
I concluded that also, since whatever partition is getting corrupted won't be able to be written to. But I haven't had the guts to try it again yet.
How about it with your new one and let me know. Haha. I'm already two bricks in.
Click to expand...
Click to collapse
Lol I haven't gotten my new one yet went to VZ yesterday and they said they only had new ones in stock and no warranty replacements. They offered me a Razr. Why couldn't I just get a new one? I dunno... Dumbass Verizon lol
Gonna try HTC Repair Department today and see if I can get one from them. If not I'll just keep trying at VZ
dmeadows013 said:
Lol I haven't gotten my new one yet went to VZ yesterday and they said they only had new ones in stock and no warranty replacements. They offered me a Razr. Why couldn't I just get a new one? I dunno... Dumbass Verizon lol
Gonna try HTC Repair Department today and see if I can get one from them. If not I'll just keep trying at VZ
Click to expand...
Click to collapse
trade you my rez for your gnex
---------- Post added at 02:09 PM ---------- Previous post was at 02:08 PM ----------
a.mcdear said:
Wasn't the whole purpose of the "wire trick" that we used for S-OFF for forcing the phone into download mode?
**edit**
oops didn't read the whole discussion. My bad
Click to expand...
Click to collapse
lol no worries.
---------- Post added at 02:10 PM ---------- Previous post was at 02:09 PM ----------
chad0989 said:
It would still be nice to have a solid way of unbricking. If I keep sending them back with the same exact problem I feel they would get suspicious eventually. Plus the new one I just got is pretty flawless so far, no dead pixels or anything so I'd like to keep it.
I have a new CM build sitting here right now that I'm terrified to try. Haha. So if you're uh sending the one with the bad screen back and want to try a couple things out first...
Click to expand...
Click to collapse
do you think it has something to do with the kernel that is causing the bricks?
One thing I'm worried about is if devs stay s-on to prevent bricking then how would they know if their stuff would brick other people's phones or not?
Sent from my ADR6425LVW using Tapatalk 2
ijustwantmydock said:
One thing I'm worried about is if devs stay s-on to prevent bricking then how would they know if their stuff would brick other people's phones or not?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
what about if everyone s-on's ? i mean s-off is nice but if it means brick/no brick....
dmeadows013 said:
Lol I haven't gotten my new one yet went to VZ yesterday and they said they only had new ones in stock and no warranty replacements. They offered me a Razr. Why couldn't I just get a new one? I dunno... Dumbass Verizon lol
Gonna try HTC Repair Department today and see if I can get one from them. If not I'll just keep trying at VZ
Click to expand...
Click to collapse
Just call *611 and keep hitting 0 until you get someone. They'll transfer you to the tech support people and they'll hook you up.
After rooting my phone and installing the LiquidSmooth rom, I was looking for a kernel to try and oc my cpu. Found this one, did a nandroid backup, and flashed it: http://forum.xda-developers.com/showthread.php?t=1362424&page=2
Problem is, now my phone won't boot at all. By this I mean, it won't normal boot or boot into recovery, it doesnt even have any splash screens. No matter what buttons I hold down the screen stays black, nothing pops up, no sounds are made, nothing vibrates, absolutely nothing happens.
The battery isn't dead, I had it charging when I was doing all of this and it was at least 90%.
Please help, I don't have any idea what, if anything, can be done D:
that sucks bud
justintib said:
After rooting my phone and installing the LiquidSmooth rom, I was looking for a kernel to try and oc my cpu. Found this one, did a nandroid backup, and flashed it: http://forum.xda-developers.com/showthread.php?t=1362424&page=2
Problem is, now my phone won't boot at all. By this I mean, it won't normal boot or boot into recovery, it doesnt even have any splash screens. No matter what buttons I hold down the screen stays black, nothing pops up, no sounds are made, nothing vibrates, absolutely nothing happens.
The battery isn't dead, I had it charging when I was doing all of this and it was at least 90%.
Please help, I don't have any idea what, if anything, can be done D:
Click to expand...
Click to collapse
Oh man, that sounds like what happened to mine, It died.. dead. nothing. sent it back to where I bought and they replaced it. it was in the 15 day period. jag wanted 250 to fix it, I just bought a second note for parts. if it did die, keep an eye out for a broken screan can get cheap.
Ur prob is u flashed the wrong kernal for the wrong type of phone that is a no no. The n7000 is not the same as the i717. That is y u stay in the same section of the phone u have. I hope u still have a warranty. Next time stay in the i717 section.
Bradl79 said:
Ur prob is u flashed the wrong kernal for the wrong type of phone that is a no no. The n7000 is not the same as the i717. That is y u stay in the same section of the phone u have. I hope u still have a warranty. Next time stay in the i717 section.
Click to expand...
Click to collapse
So basically, my only option is to replace it?
Or send it to JTAG repair service, spend $50, wait a week.
My Note just kicked the bucket too. I installed Flap-Jack's Kernel on top of Liquid Jellybean 2.8 and when it tried to reboot it seems to have died & laid down on me. It's going to be fun using an old Motorola Flip Phone again. Damn, I'm pissed!
sholsten said:
My Note just kicked the bucket too. I installed Flap-Jack's Kernel on top of Liquid Jellybean 2.8 and when it tried to reboot it seems to have died & laid down on me. It's going to be fun using an old Motorola Flip Phone again. Damn, I'm pissed!
Click to expand...
Click to collapse
Which version of flapjaxx's kernel did you flash? He has kernels for ICS and jellybean. Must have flashed a ICS version.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I knew it was JB. I used h0tcakez-JB-Kernal-v2.3.5-Alt. I used it on 3 or 4 different roms here lately with no issues..
---------- Post added at 12:23 AM ---------- Previous post was at 12:21 AM ----------
What do y'all think a bricked Note 1 is worth these days?
---------- Post added at 12:27 AM ---------- Previous post was at 12:23 AM ----------
I forgot to mention that my Jig doesn't do anything with this!
Heck I'll buy it for $50 lol.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
It's too early to bring the salt out yet.
Sorry. Didn't mean to break out the salt.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I bought it brand new from a guy on eBay and then registered it on the Samsung site. It shows to be still in warranty on Samsung's site till the end of June. Will it still be this easy to get it replaced as u say AT&T is?
Post withdrawn.
I'm going to report it to Samsung tomorrow and at least try to send it in.I wish they'd accidentally send me a Note 2 for kicks & grins.
Yeah, that's fair. You screwed up, then tried to defraud the warranty process. You definately deserve an upgrade.
No wonder the bootloaders are being locked and prices are more ridiculous. What ever happened to "I screwed up -- no I live with my mistake?"
Wait... Responsibility for ones actions? What do you think these are grown men or something?
studacris said:
Wait... Responsibility for ones actions? What do you think these are grown men or something?
Click to expand...
Click to collapse
Now I'm all for people expressing their opinions whether its in support or against whatever topic that's being discussed. However, insulting comments like this one I've quoted is unnecessary and has absolutely no value. There is a difference between stating that you don't agree with something or explaining why you don't agree, verses personally attacking or insulting someone because you don't like what was said. "Grown men", as I'm sure we all are, should know the difference and know what's appropriate and what's not.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
I've told certain individuals in several threads not to condone fraud on this forum the last 2 days . Enough is enough.
studacris said:
I've told certain individuals in several threads not to condone fraud on this forum the last 2 days . Enough is enough.
Click to expand...
Click to collapse
That is not what my post is addressing. Im simply pointing out that the specific post you made is not necessary.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Sometimes shame can cause positive character growth.
Besides, people who commit fraud and encourage others to do it hurt a lot more than feelings.
I need some serious help, my galaxy s2 wont boot into recovery i just get a "firmware upgrade encountered an issue...", i cant get odin to recognize it, and during the time i could boot into recovery, i couldnt mount the sd card to flash a firmware, and last time odin recognized it kept getting stuck on modem.bin and say (write error) or something of the sorts, please i desperately need help
Here maybe this http://forum.xda-developers.com/showthread.php?t=2058683 could help you.
Sent from my GT-I9100 using xda app-developers app
Stop referring people to that thread of yours when phones aren't bricked. Immediately. Or I will deal with you. Are we clear ? :-/
If they follow those steps & the phone isn't bricked, they sure as fcuk will have a brick on their hands if it goes wrong.
This person's phone isn't even remotely close to being bricked, it's a simple case of 'Odin won't work' like 99.9999% of those cases on here, and the fix is usually very simple.
OP - This gets covered here so many times per week it ain't funny. Search for similar threads, there are a bunch troubleshooting steps you need to follow (This is the final time I'm typing that as well, from now on people will just get 'Search').
king_below_my_lord said:
Here maybe this http://forum.xda-developers.com/showthread.php?t=2058683 could help you.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
thank you but the problem is that i cant get odin to recognize the phone, and i cant seem to find a fix on the site that i haven't yet tried, so, i'm trying to see if anyone has anything other that install drivers, uninstall kies, and use samsungs cable, because i've tried all of those multiple times with no luck
MistahBungle said:
Stop referring people to that thread of yours when phones aren't bricked. Immediately. Or I will deal with you. Are we clear ? :-/
If they follow those steps & the phone isn't bricked, they sure as fcuk will have a brick on their hands if it goes wrong.
This person's phone isn't even remotely close to being bricked, it's a simple case of 'Odin won't work' like 99.9999% of those cases on here, and the fix is usually very simple.
OP - This gets covered here so many times per week it ain't funny. Search for similar threads, there are a bunch troubleshooting steps you need to follow (This is the final time I'm typing that as well, from now on people will just get 'Search').
Click to expand...
Click to collapse
Yeah I get it :thumbup: (that's why the first line of the guide is meant to and usually does, scare people off), but if he eventually reaches the desperation point(no amount of flash attempts succeeds) , following my guide would be better than blind flashing of pit files(in a case where recovery is completely inaccessible my guide is useless) , which I have seen people recommending to do, if the user is lucky enough to flash a kernel and bootup the recovery, memory block corruption(it can happen because of reasons like phone turned off while flashing via Odin, removing cable midway of odin flash, and possibly several others) can also be effectively corrected.
Edit :I have made the guide a little bit more safer so that any noob who ignores all the warnings and go ahead with the procedure will stop after the first step if he/she is not having corrupted block's, effectively keeping him/her safe.
Sent from my GT-P6200 using xda app-developers app
king_below_my_lord said:
Yeah I get it :thumbup: (that's why the first line of the guide is meant to and usually does, scare people off), but if he eventually reaches the desperation point(no amount of flash attempts succeeds) , following my guide would be better than blind flashing of pit files(in a case where recovery is completely inaccessible my guide is useless) , which I have seen people recommending to do, if the user is lucky enough to flash a kernel and bootup the recovery, memory block corruption(it can happen because of reasons like phone turned off while flashing via Odin, removing cable midway of odin flash, and possibly several others) can also be effectively corrected.
Edit :I have made the guide a little bit more safer so that any noob who ignores all the warnings and go ahead with the procedure will stop after the first step if he/she is not having corrupted block's, effectively keeping him/her safe.
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
um so do you think there is hope, i really dont want to lose this phone...
gmatni said:
um so do you think there is hope, i really dont want to lose this phone...
Click to expand...
Click to collapse
Well I don't think you could even attempt my guide since you can't flash via Odin and don't have recovery, it works only for people who can somehow bootup into recovery.
Sent from my GT-P6200 using xda app-developers app
king_below_my_lord said:
Well I don't think you could even attempt my guide since you can't flash via Odin and don't have recovery, it works only for people who can somehow bootup into recovery.
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
do you think you might have any other tips that might help me?
gmatni said:
do you think you might have any other tips that might help me?
Click to expand...
Click to collapse
Without Odin you're basically screwed, did you try different computers? Or are you sure that your usb port is in full working condition?
Sent from my GT-P6200 using xda app-developers app
king_below_my_lord said:
Without Odin you're basically screwed, did you try different computers? Or are you sure that your usb port is in full working condition?
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
i haven;'t tried a different computer yet but my laptop is basically new just less than a month old and i tried all of the usb ports on it
MistahBungle said:
Stop referring people to that thread of yours when phones aren't bricked. Immediately. Or I will deal with you. Are we clear ? :-/
If they follow those steps & the phone isn't bricked, they sure as fcuk will have a brick on their hands if it goes wrong.
This person's phone isn't even remotely close to being bricked, it's a simple case of 'Odin won't work' like 99.9999% of those cases on here, and the fix is usually very simple.
OP - This gets covered here so many times per week it ain't funny. Search for similar threads, there are a bunch troubleshooting steps you need to follow (This is the final time I'm typing that as well, from now on people will just get 'Search').
Click to expand...
Click to collapse
I hope you read all my replies (also those in the guide thread because I have explained some stuff and made some changes ) basically if a user ignores everything in my guide and flashes any of the pit files, only if the flash fails will he get a brick(as usual), otherwise he will have an sd card with a lot less space. I hope you don't mind me quoting you in my main post.
Sent from my GT-P6200 using xda app-developers app
---------- Post added at 02:26 AM ---------- Previous post was at 02:19 AM ----------
gmatni said:
i haven;'t tried a different computer yet but my laptop is basically new just less than a month old and i tried all of the usb ports on it
Click to expand...
Click to collapse
Try everything possible to get it working, like on a friend's computer, for some people changing computer's have worked.
Sent from my GT-P6200 using xda app-developers app
king_below_my_lord said:
I hope you read all my replies (also those in the guide thread because I have explained some stuff and made some changes ) basically if a user ignores everything in my guide and flashes any of the pit files, only if the flash fails will he get a brick(as usual), otherwise he will have an sd card with a lot less space. I hope you don't mind me quoting you in my main post.
Sent from my GT-P6200 using xda app-developers app
---------- Post added at 02:26 AM ---------- Previous post was at 02:19 AM ----------
Try everything possible to get it working, like on a friend's computer, for some people changing computer's have worked.
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
alright i guess ill just do all i can and hope for the best, thank you for your time
Kies, where's kies?
Install Kies, and then kill it.
Sent from my GT-I9100 using xda app-developers app
My Solution
gmatni said:
i haven;'t tried a different computer yet but my laptop is basically new just less than a month old and i tried all of the usb ports on it
Click to expand...
Click to collapse
Yes...myself faced the same problem , i tried to 3 different laptops but ODIN didn't detect my S2 . Finally with my luck , it got detected in my Home PC and i flashed it..are you able to go to download mode ? if no use USB jig... :good:
Try this :
http://forum.xda-developers.com/showthread.php?p=42592007#post42592007
Wow. That's a magical fix
OP - You were told to search for similar threads, there are 6 or so other steps you haven't even tried once yet. Bottom line is, if you want your phone fixed, you're going to need to do everything and quite possibly do it over & over till it works. Nobody here can do that for you. If you can't be bothered trying 2nd or 3rd PC and go thru the troubleshooting steps as well on those if necessary, your phone is going to stay busted.
The end.
MistahBungle said:
Wow. That's a magical fix
OP - You were told to search for similar threads, there are 6 or so other steps you haven't even tried once yet. Bottom line is, if you want your phone fixed, you're going to need to do everything and quite possibly do it over & over till it works. Nobody here can do that for you. If you can't be bothered trying 2nd or 3rd PC and go thru the troubleshooting steps as well on those if necessary, your phone is going to stay busted.
The end.
Click to expand...
Click to collapse
ok so i tried on 6 computers with nothing, I installed kies on all of them then killed it nothing, I tried 5 versions of ODIN and that didnt work, I tried uninstalling all the phones drivers and installing them all over again, and still nothing...
How about your usb cable?
Sent from the little guy
gastonw said:
How about your usb cable?
Sent from the little guy
Click to expand...
Click to collapse
I tried 3 of them, the original Samsung cable, and an original LG cable, along with another generic one
Well, don't you think it would be smart to get another S2 cable?
Borrow it, buy it, whatever.
Sent from the little guy
gastonw said:
Well, don't you think it would be smart to get another S2 cable?
Borrow it, buy it, whatever.
Sent from the little guy
Click to expand...
Click to collapse
my friend has an S2 as well, I just borrowed his hes here with me, and still nothing, whats happening is that the computers arent even recognizing that something has been plugged in, none of them are, his phone is recognized instantly by odin and all, but once he unplugs his and i plug it into mine, it just does nothing