On anything cm7 everytime i plug in the usb the phone restarts. No matter what rom and not sure about Motorola stock rom.
Tried 7different oem motorola usb cables with no result and several different computers all windows 7. Once the phone restarts usb works fine.
any help?
Related
This is a new issue, it used to work fine, but now, whenever I plug a USB cable into my phone and PC, nothing happens on the PC(No usb found sound) and the phone just shows that it is charging. I opened Device Manager and plugged the phone in and it did not refresh or find anything new. No Unknown Devices in DM either. Currently I am working with a Windows 7 x86 laptop.
Things I have tried:
-Different PC
-Different USB cable
-Factory Reset
-Uninstall/reinstalled HTC drivers
I dont know what the issue is, do I have a bad USB port? Any suggestions?
same problem
bump
I flashed my atrix using RSD lite and unlocked the boot loader. Once complete the phone rebooted and everything works fine except when i plug in the USB it flashes USB Connection in the notification bar and then quickly disappears. It will not connect to my PC. The PC detects it and then says device unplugged.
I have tried 3 computers 2 USB cables - wiped cache and reformatted.
It still charges and when in RSD or fastboot mode it works fine.
Thanks in advance for your advice
To me it sounds like you need some drivers.
If you're on windows 7 it will automatically install proper drivers. If not, you have to download the drivers for the device to work properly.
Sent from my MB860 using Tapatalk
I have the proper drivers. I have plugged another atrix in to the same PC and connected with no issue. It is only this device. It connected fine before I unlocked the BL
this happened to me as well, are you able to charge normally? if you are not able to then it means that you have the exact same problem I had with a atrix, if you are under warranty I suggest you try cashing it in as there is mainboard damage, swapping the microUSB port will not help, I think there is a fuse on pin 2 or something that is blown
The phone charges fine. And the usb works in fastboot and rsd mode. When i plug usb into pc it charges just will not install
I do have same problem with my motorola atrix 4G. How did you get it resolved ?
fin05 said:
The phone charges fine. And the usb works in fastboot and rsd mode. When i plug usb into pc it charges just will not install
Click to expand...
Click to collapse
I can only connect to my computer through normal usb, fastboot, and s/w and upgrade mode, but not usb debugging. And yes I have reinstalled my drivers over 3 times, and factory reset plus reinstalled u-boot and xloader. I tried different ports and usb cords and still nothing. The phone only charges or will say connected as installer, and the pc will see it, but i can't use it as an adb device or a storage device. I have had this problem for 3 months after trying to unlock bootloader and just need to spitball some ideas.
I do think this is a pc issue because it doesn't work on other pcs either.
I have been running on Cooks I777UCMD8 rom for about 2 months now and have had multiple powering issues. Have tried all the basic trouble shooting, not sure if its the Rom causing the issues or the AJK noswap Kernel, but nothing has been tweaked, running as is. The booting issue is when connecting a USB cable while the phone is powered off, if you try to turn the phone on while the USB cable is still attached you get a POWER RESET OR UNKNOWN UPLOAD MODE error message, only way to avoid it is to remove the usb cable and hold power button then it powers up normally.
now the problem with the USB cable, and i feel these two are possibly related, my phone no longer recognizes when its attached to a computer usb hub, it charges, but dose not enter into mass storage mode, nor does the computer recognize that the phone is attached, i have tried on multiple computers with same results, and yes all drivers are downloaded on computers. Further information; Before this problem began accruing, I would get error messages after attaching the phone to a pc VIA usb cable saying ( ONE OF THE USB DEVICES ATTACHED TO THIS COMPUTER HAVE MALFUNCTIONED, AND WINDOWS DOES NOT RECOGNIZE IT ) also, after plugging in the usb cable and windows attempted to download the drivers this error also appeared ( DEVICE SOFTWARE WAS NOT SUCCESSFULLY INSTALLED, CONSULT WITH YOUR DEVICE MANUFACTURER FOR ASSISTANCE ) it later resolved itself for a short time ( couple days ) but now when i connect the phone, nothing happens... i'm hoping somebody has had similar USB problems after flashing a new rom and knows whats going on.
additional information:
- i have two Galaxy S2 phones both running cooks-i777ucmd8 rom and both phones have had the exact same issues.
- previous problems also include boot looping, and frozen lock screen upon powering up the phone. has not happen in a while.
I'm having an issue with my Samsung Galaxy S2 GT-I9100 (running on stock Jellybean 4.1.2) no longer connecting to the PC via USB. It had been working fine up until a few days ago.
When I connect the USB cable, it only charges the phone. It doesn't show that it is connected in MTP mode and no USB options appear in the pull down notification bar. I tried locating the phone on the computer in Windows Explorer and the Device Manager, but it wasn't there at all. There also wasn't any unrecognised device in the Device Manager.
I’ve tried the following:
Using different USB cables. Tried two official Samsung cables, a Belkin charge/sync cable and a generic cable
Plugging into different USB ports on 3 different PCs/notebooks (running on Windows 7/8)
Turning on/off USB debugging mode on the phone
Going into Settings>Wireless and networks>USB utilities. After tapping "Connect storage to USB", it will prompt to connect a USB cable even though it is already plugged in.
Booting the phone in safe mode and connecting the USB cable
Installing the latest version of KIES. I had never used the software before but gave it a try. KIES wouldn't detect the phone
Uninstalling and reinstalling the latest Samsung drivers
Dialling *#7284# for the PhoneUtil options and checking it was PDA mode under the USB option.
Turning off the phone, removing then re-inserting the SIM card and battery
Cleaning the micro USB port on the phone
I have not made any changes to the phone (or PCs), so I'm not sure what has happened for the USB connection to stop working.
Your assistance would be much appreciated.
That is very weird. Are sure you didn't change the USB connection type?
danielbe said:
That is very weird. Are sure you didn't change the USB connection type?
Click to expand...
Click to collapse
Definitely sure.
I'm wondering if maybe the micro usb port is damaged, even though there's no problems charging the phone.
That is very possible, the port can be damaged in a way that only allows charging.
Hey guys, My micro-usb was damaged so i changed it with a new one... It didn't work and phone was charging instead of Mass Storage or Debugging mode !
I thought its fake and a bad quality micro-usb so i changed it again and still have the same problem.
I have the same computer, same cable and everything is same, even the programs which i installed in both phone and pc are same, but it wont connect to pc.
My moms phone can be connected with my cable.
Ok, before i change the Micro-Usb, it was fine but not charging as good as normal. I mean at least i was able to upgrade or downgrade my android version )
Can anyone help me ? I already did a factory reset and removed the SD card. No lucks ... ( i also tried other cables and other computers, but the problem is ONLY with my damn phone )
I'm running Android 4.0.3 KH3