If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
j47d8234554 said:
If i flash both of them , bootloop will occur and the reaction becomes slow
However , remix 1.4 hasn't this problem
who can tell me why ?
Click to expand...
Click to collapse
KERNEL not suit rom..
jje
How to update from v 1.0
this is my first post, so yeah im a noob, but just want to ask if i was on Resurrection ics v1.0, how could i update? do i just jump to the most recent update, or is there a certain update i have to flash first before moving on? ive tried to flash the v1.4 but then it would'nt boot, then i restored a backup, tried a couple times even from a fresh stock rom, but still it couldnt boot, what do you think the problem is?
sorry for all the questions
i was on resurrection now i dual boot 1.8 with siyah 3.1.2 with D4 rom( which is amazing btw) try 3.1.2 siyah and see if it works - im avoiding RC's and betas for kernel since the brickings, unless you want the features from rc5
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
xXlordyXx said:
@yugorisfriwan you don't need to install any update, go straight to the last version.
To install
1- full wipe & wipe cache
2- install rom
3- wipe dalvik
4- reboot (it takes time to boot the first time so be patient)
5- install another kernel (siyah of instance) otherwise you are done.
Now to my question
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
Thanks mate!!
yugorisfriwan said:
Thanks mate!!
Click to expand...
Click to collapse
hey i am using this remix rom right from the ver 7.4 now on v1.8.1 what i sugesst u first is 2 install v1.7 then u upgrade it 2 the new v1.8.1 by simply flashing it over v1.7 without any wipes that way u wont have any issues in installation
PS: while installing 1.7 u do a full wipe
ie
wipe data/factory reset
wipe cache part
wipe dalvik cache
then install v1.7
then again wipe cache
wipe dalvik cache
Fix permissions
reboot 2 system
boot takes a while?
So how long do i have to wait for the phone to actually boot after updating? So ive flashed the updates, but when i select reboot now, it then comes to the Galaxy s ii i19100 splash screen. Now i have waited for at least 5 minutes, and nothing happened yet, so just restored my backup in fear of something going wrong am i too inpatient or is that just taking to long? how many minutes do i actually have to wait until its a sure flash fail? thx in advance!
5 minutes is too long, are you sure that you have done a full wipe before installing the rom and then wiped the dalvik cache after. The only time when my phone wouldn't boot was when I had forgotten to do the wipes.
anyway just redo the process and make sure you do everything (don't flash any kernels) and just leave the phone for few more minutes than last time. otherwise try to install another version (1.7 for instance) and see if it boots this time
installation problem
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
rzrdelta said:
hi ,guys
sorry to post here,but i am having a annoying problem during the installation .
As,i am trying to install it is showing a build prop problem and showing some step7 and displaying msg as installation aborted.I did full wipe,wiped cache did data reset,wiped dalvik everything i did but this problem still annoys me.
Click to expand...
Click to collapse
hey which rom ur trying 2 install if its v1.7 of remix then first flash the cm9 kernel dwnld'ng the same from OP (original post in page 1 of remix ics thread) section after that reboot 2 cm9 recovery and then flash 1.7 it will be ok
5 minutes are too long mate. before flashing make sure that the current rom you are on has default CM9 kernel (for version 1-1.8)
After that follow the steps:
1.wipe data/factory reset
2.wipe cache partition
3.install main rom
4.go in advance and wipe dalvik cache and then fix permissions
5.wipe cache partition again and reboot
6.after ur first reboot u can then flash kernels,themes,and mods
enjoy
So... if im still on resurrection version 1.0, would installing the stock cm9 kernel work? .... then i could update?
So any workarounds on accessing the external sd on the computer?!!?
xXlordyXx said:
I have the version 1.8.1 and siyah kernel 3.2b8 everything works great except that I cannot access my external sdcard on my computer. I also tried the default and thoravukk kernels but they give the same result.
Thx in advance for your help
Click to expand...
Click to collapse
This seems to be a bug with the rom. I got the same problem on 1.4 and on 1.8.1. It will only mount the internal mass storage.
To work around this: Mount it with CWM. Works for me.
Hi guys.
Been trying to figure this our for hours.
I flashed AOSPxXx-ICS-20121111 on my phone but not it runs brutally slow. It takes a like 30 seconds to launch apps.
I followed this steps.
booted to cwm
wiped user data
wiped cache
wiped dalvik cache
install rom
rebooted
let it sit for 10+ mins
What am I doing wrong?
Thanks
Wipe all of the above, plus the system partition.
I cant confirm that the new rom wipes the system partition for you, but if not, then you dirty flashed.
that will cause all kinds of trouble.
Also, did you add any mods like a new kernel ?
I ultimately suggest a new full wipe, and flash. and even a new download of the rom to ensure a clean build.
Sometimes they arrive all borked up....g
Rewipe reflash nd if persist reboot a couple times sometimes it can be slow after aa flash give a couple of reboots nd itll snap too
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
What else did you flash? Theme, modem,??
Just wipe and re flash. Don't restore apps, get them from the market.
All I did was flash a new rom, nothing else. I will try again =)
ok i finally got it to work. used odin and restored ics 4.0.4 =)
Hey guys,
I have a Samsung GT-I9300 (International).
I rooted my phone in order to get cwm recovery.
I placed the CM10.1.zip and the gapps.zip on my extsdcard.
I access cwm and install both via the menu.
Then I did a factory reset ´cause everywhere is written i have to do it to get past the bootscreen.
But apparently it doesn't work.
I tried every possible way to get it up and running.
reset -> flash -> reset
reset -> flash
flash -> reset
flash...
I searched on Google for hours but nothing helped so far.
Hope you guys can helpme =)
arough
flashing
arough007 said:
Hey guys,
I have a Samsung GT-I9300 (International).
I rooted my phone in order to get cwm recovery.
I placed the CM10.1.zip and the gapps.zip on my extsdcard.
I access cwm and install both via the menu.
Then I did a factory reset ´cause everywhere is written i have to do it to get past the bootscreen.
But apparently it doesn't work.
I tried every possible way to get it up and running.
reset -> flash -> reset
reset -> flash
flash -> reset
flash...
I searched on Google for hours but nothing helped so far.
Hope you guys can helpme =)
arough
Click to expand...
Click to collapse
follow this guide step by step if problem still occurs contact me
1.Flash rom
2.Flash gapps (if isnt included to rom)
3.Wipe data&cache
4.Wipe cache
5.Wipe dalvik cache
6.Reboot (first start may take several minutes so be patient)
(its always possible that rom just isnt booting so try some other rom if this guide doesnt help)
press thanks if i helped
god damn it!
nothing works...
flashing kernel via Odin works 1 out of 10 times...
flashing rom works not at all
the whole day I'm trying to get CM on my phone -.-
I once flashed my kernel and everything worked perfectly, but no it just an enormous ****storm
and on top of it I freakin deleted my backup and now I can't even get back my old system
hell of a day
from where do I start flashing the rom if I do it a second time?
just "overflash" the old one or start from stock?
EDIT:// HOLY KAMOLY!
It justed worked! I just restarted it for the 42624726th time and now it works like a charm =)
I hope if I update it any time soon I don't have to pray to the almighty flying spaghetti-monster again
there shouldnt be any problem updating cyanogenmod just remember latest cyanogenmod is experimental and you should not flash any kernel anyway feel free to ask if your having problems
What recovery are you using?
Details help.
Hello i am a newbie here. I recently installed Pacman rom the released version to my epic 4G touch galaxy s2 and it worked flawless. [[[How i installed it : 1) restored my phone to ICS. 2) Got Mobile Odin and got the add on to flash. 3) Flashed CWM EL29 4) Got into recovery and Wiped data/ factory reset. 5) Installed ROM and GAPPS 6) Wiped Cache and Dalvik and i rebooted.]]]Then i saw the new cyanogen 11 and i decided to get but when i got into recovery it would say an error trying to install the rom. So i wanted the Pacman rom back so i went and restored my E4GT to ice cream sandwhich FJ12. After that i installed mobile odin and got the add on thingy to flash. Next I clicked Kernel and flashed CWM EL29 v.5.0. I did the steps again. Wipe/Data Factory reset. I installed the ROM and GAPPS. I wiped cache partition and dalvik cache. So when i rebooted it.. It took me to the boot animation with pacman chasing the ghost and the bottom saying pacman with the animation glowing different colors.I waited and waited for about 10 mins and nothing happened. It still stood there! I also noticed that when it was doing this, i tapped the home button and the keys lit up. I kept tapping the keys and nothing happened to the screen. It stayed the animation. I restored back to ICS again. Did all the exact same steps. It still stayed there! I kept restoring to ICS and did what i kept on doing but i tried different steps in recovery mode. Still sits there at the screen animation. After like 8 times of failure.. I tried to go and restore GB28 Jellybean stock and then restore to ICS stock. When the downloading process finished, the virgin mobile animation kept repeating and never wanted to load the screen. So i went back to ICS and tried to get Pacman rom for the ninth time. I failed. Help me! I also noticed that when i go to wipe dalvik cache.. Before wipe it says something in the bottom " extsd-not found " something like that. But i still wipe it. So please help if you can!
Hi,
I had rooted my samsung galaxy note 2 a year ago. Till then I successfully flashed many ROMs. However recently when I tried to install DN3 (Ditto Note 3) ROM, when it rebooted my phone stuck on the "Samsung Note GT-n7100" logo and could not move further. It was "soft" bricked. I installed Philz recovery through ODIN and able to restore my data. After then I tried 2-3 times to install the same ROM but every time the installation failed in between.
At last I tried to install Phoenix touchwiz ROM but my phone got hanged again in between during installation. It seems there is some problem in my internal memory card which comes in between during installation.
Do I need to format my internal memory? Please let me know the probable causes of this issue.
Just wanted to tell you that all the time I wiped cache + Wipe Cache partition + Wipe Delvik Cache before commencing installation.
your comments would be greatly appreciated!