Hi,
Has anyone been able to port Wifi Calling settings to this phone from another ROM?
I would like to see if settings can be put on an unlocked USA T-Mobile Phone in the UK?
any pointers would be appreciated.
thx!
Wrong section to post in dude!
Sent from my GT-I9300 using Tapatalk 2
Thread moved to Q/A, the development section is not the place for this sort of thread
Related
Everybody's work here is terrific! I have a HSPA+ speed question. I've been playing with my phone today, and noticed when I restore my stock backup I get faster speeds. Stock backup I get 5-7meg download, and on unamed, and ICSrewed I get 1-2.5. I checked and the apk settings are the same across the board. Just curious...
are you running the same modem as stock while on one of the custom roms? Different modems work better in different areas.
Btw this belongs in q /a not dev forum.
Sent from my unf#cked att sgs2
I get consistently 5+ in my area
Sent from my SGH-I777 using Tapatalk
canecbr600 said:
Everybody's work here is terrific! I have a HSPA+ speed question. I've been playing with my phone today, and noticed when I restore my stock backup I get faster speeds. Stock backup I get 5-7meg download, and on unamed, and ICSrewed I get 1-2.5. I checked and the apk settings are the same across the board. Just curious...
Click to expand...
Click to collapse
Check ur modem and i know u prob didnt knkw but post in Q/A
Sent from my SGH-I777 using xda premium
You think this has anything to do with development? Did you create anything? No so it belongs in Q&A
Sent from my SGH-I777 using XDA App
Moved. In the future, please do not post questions in the Dev forum, or infractions will be handed out. If you are unsure of where to post, please read the rules of the forum.
Modem=baseband can be found in settings-about phone. First thread in dev section has zips to flash. I flashed mine right over existing rom no wipe and it worked but had to reflash after updating as modem was included in rom. BTW modem=radio also.
It appears I cannot get voice or data to work when I put in my Verizon sim. I had it in global mode using an att sim but when I put in my Verizon sim and switch to cdma lte it doesn't work. I have tried refreshing beans with the Verizon sim in it but it says it can't activate the phone and. Any help would be appreciated !
Sent from my SCH-I605 using Tapatalk 2
Read forum rules before posting
You posted in the developer's section
Questions and help go in the Q&A and help section
Thread moved
FNM
Is it possible to SIM-unlock this phone to use in the US with a tmobile SIM? I know this phone can be easily unlocked for international SIM use, but how about for domestic SIM use?
http://forum.xda-developers.com/showthread.php?p=35368033
Sent from my SCH-I605 using Tapatalk 2
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Also wanted to share this. I pmed the dev (to give him the Verizon qcn) and asked if this would work on a Verizon phone going to t mobile. He wasn't sure but said worst case is just restore your qcn that you backup before trying.
http://forum.xda-developers.com/showthread.php?p=35933247
Sent from my SCH-I605 using Tapatalk 2
Thanks for the info guys! So with tmobile, I could only get Edge speed unfortunately.
Would I at least be able to get 3G if I take this phone to AT&T?
Hey everyone, i haven't done many post on here yet, i figured this could help out many people, or at least people on the same both as I,
I have my evo 4g lte flashed to metro, with everything working, however, i messed something up on qpst earlier and now it won't connect to the network, does anyone have the qpst settings for it? I can help out with whatever i need, i tried following bloody's post on how to flash the 4g/3d qpst settings but those settings don't work with the lte apparently, any help would be appreciated!
Re: Htc Evo 4g Lte on MetroPCS I need qpst settings
Wrong section?
Sent from my EVO using xda app-developers app
oh i'm sorry what section would this go under? i just figured it'd be development since all other flash stuff i've found has been under development
aceajoy said:
oh i'm sorry what section would this go under? i just figured it'd be development since all other flash stuff i've found has been under development
Click to expand...
Click to collapse
This belongs under Q&A. You'll get more answers there :good:
Talal916 said:
This belongs under Q&A. You'll get more answers there :good:
Click to expand...
Click to collapse
alright thanks for the help! i moved the thread over now :highfive:
OK, so to start I have read and read and search the forums, but I don't see anyone with these strange symptoms, so here it is...
I have a GT-I9300 running CM 10.2 (4.3.1) here in China, and in my home the signal is terrible, between 0 and 1 bar. I do get data, however it constantly jumps between E and H+, so I decided to give an RIL update a try. I downloaded some RILs and some MODEM+RILs to try experiment with, two which reference China and a UK unbranded one. Flashed all three and always I get the same strange result.
With the original RIL and/or matching or unmatching Baseband, I get 0 to 1 bar and slow data. If I flash ANY of the 3 that I downloaded I get FULL SIGNAL bars, and it's glued to H+ with great data rates. I can make calls just fine, however none of the downloaded RILs allow me to receive calls. I go back to the original setup and my signal drops to nothing, data goes back to slow, but I can send and receive calls.
Ideas?
Thanks in advance.
Wrong section, this is not Q&A. Anyways, flashing ril on cm will break calls or other stuff, since cm is not using a standard implementat of libril. The only thing you can change is the modem.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Exactly. CM uses OpenRIL, so flashing any sammy ril will break it. Download an app called 'perka's file stash' from playstore, there are plenty of modems without ril that you can safely flash. but first, reflash CM to restore normal ril.
. .and then read general > sticky roll-up thread > understanding the basics before rooting. All this and much more is covered
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Moster2 said:
Wrong section, this is not Q&A. Anyways, flashing ril on cm will break calls or other stuff, since cm is not using a standard implementat of libril. The only thing you can change is the modem.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's funny you should say that given the section this thread is in is called "Galaxy S III Q&A, Help & Troubleshooting"
I think it's right there in the middle somewhere...
But I digress. Changed the modem, aside from my phone changing the way it identifies my carrier there seems to be no change. Sometimes the carriers is called China Unicom, sometimes it's called CU-CHN. Odd.
fvultee said:
It's funny you should say that given the section this thread is in is called "Galaxy S III Q&A, Help & Troubleshooting"
I think it's right there in the middle somewhere...
But I digress. Changed the modem, aside from my phone changing the way it identifies my carrier there seems to be no change. Sometimes the carriers is called China Unicom, sometimes it's called CU-CHN. Odd.
Click to expand...
Click to collapse
Your thread was moved. Dont think that you opened in this secton. It was in general before
Sent from my GT-I9300 using XDA Premium 4 mobile app
Moster2 said:
Your thread was moved. Dont think that you opened in this secton. It was in general before
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Well I guess someone moved it for me, very nice of whoever that was!
We report threads in the wrong place using the report /!\ button
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit