Hi,
We Samsung Captivate Glide users recently got a leak for ICS. However the keyboard backlight is not working...it might be missing from the kernel. Is there any way to put that in?
Aquethys said:
Hi,
We Samsung Captivate Glide users recently got a leak for ICS. However the keyboard backlight is not working...it might be missing from the kernel. Is there any way to put that in?
Click to expand...
Click to collapse
We've got it
http://forum.xda-developers.com/showpost.php?p=30591025&postcount=42
Related
Has anyone been successful using the car dock with EC09 GB?
I have used "Galaxy Dock Sound Redirector" on ComRom2 without a hitch. Now in GB I can get it to notify the redirect, but there is no sound produced...
/Thanks
Samsung's 2.3.3 isn't working correctly with the dock audio; it was fixed in 2.3.4. All of the other Galaxy phones had that issue, but the majority of them have 2.3.4 now.
prefanatic said:
Samsung's 2.3.3 isn't working correctly with the dock audio; it was fixed in 2.3.4. All of the other Galaxy phones had that issue, but the majority of them have 2.3.4 now.
Click to expand...
Click to collapse
Thanks, I guess I'll jump back to ComRom, until it is supported.. Thanks for your reply.
So I installed it last night and it works great for the most part. The main issues I'm experiencing are the back and search hardware buttons do not work (home is back) nor do they light up, no incoming or out going sound on voice calls, and short battery life. After work I typically have about 70% battery left, today the phone died as I left. And I didn't check to see if the GPS, BT, and Cameras work. i heard video recording doesn't work on the international SGS2 with 4.0.3
anyone else tried it yet?
Here is a link to the Galaxys2root.com video where I found the link to the file.
What rom?
What ROM did you install? I looked at the ones listed under the AT&T GS2, and the only one close to ICS was the ICScreweD rom, which is not ICS.
Well, here's hoping that we get some ICS love soon...
cogcaviz24 said:
So I installed it last night and it works great for the most part. The main issues I'm experiencing are the back and search hardware buttons do not work (home is back) nor do they light up, no incoming or out going sound on voice calls, and short battery life. After work I typically have about 70% battery left, today the phone died as I left. And I didn't check to see if the GPS, BT, and Cameras work. i heard video recording doesn't work on the international SGS2 with 4.0.3
anyone else tried it yet?
Here is a link to the Galaxys2root.com video where I found the link to the file.
Click to expand...
Click to collapse
You installed an international rom on your ATT phone. Hopefully you're able to flash it back to normal and a boot loader didn't come with it. Good luck.
PS
Red5 is probably 3 seconds away from locking this lol
Sent from my SAMSUNG-SGH-I777 using XDA App
A link to the rom is in the description of the video.
this is for the i9100 int'l SGS2 btw, NOT FOR AT&T I777
Matt112211 said:
What ROM did you install? I looked at the ones listed under the AT&T GS2, and the only one close to ICS was the ICScreweD rom, which is not ICS.
Well, here's hoping that we get some ICS love soon...
Click to expand...
Click to collapse
He installed one of the leaked samsung roms. It is for the international version and so it will have the softkey and call problems like he described.
It is obviously not something you would use as a daily driver, but it is fun to see what is on the way sometimes.
Thanks for not saying what ROM it was or thats its an international version so that other people that dont/cant read will flash and then we have 65146510484 threads started because their phone dosent work.
So to answer the OP question: No, because this rom isnt made for our phone... which is why about 40% your phone didnt work.
Thread closed.
The dreaded face unlock bug. I have been experiencing this for several days now, on and off with no particular rhyme or reason. I'll explain the bug. I press the power key to enable the phone, after 2 or 3 seconds the camera comes on, this is where is gets sticky. Sometimes it does not recognize me (like if I have my glasses on, or a hat) and gives me the keyboard to enter the pin. Other times it just dies, picture still on the screen, no combination of buttons unfreezes the phone, I have to yank the battery and start all over again.
I am rooted running Phone Bricker 2.1, stock kernel, and everything else, although I was going to try a different modem, apparently in my area a different modem works better.
I've seen numerous posts on the international version of our phone but nothing for the I-777, do I have a phone problem, or is this just an expected errata from running 'leaked' software?
Also are there any fixes anyone is aware of? I love the face unlock feature and I guess I could disable it.
One clue that might shed some light on the subject, as soon as I unlock my phone, if I use the pull down menu and mess with Wifi at all, the phone all but dies. It does recover but it takes awhile.
Thanks for any insight or a link I missed.
And happy Easter!
Wink
Phone-Bricker is not based on the leak, its from i9100 LP3 (o2 carrier) base.
Not sure what the face unlock bug is but I tried it before without any problems.
Try using Entropy's latest kernel named Zombie Ass!
I am running Phone Bricker and also use the Face Unlock feature, with no problems whatsoever. But then, I've only had my phone since Friday.
Sent from my SGH-I777 using xda premium
LiLChris06 said:
Phone-Bricker is not based on the leak, its from i9100 LP3 (o2 carrier) base.
Not sure what the face unlock bug is but I tried it before without any problems.
Try using Entropy's latest kernel named Zombie Ass!
Click to expand...
Click to collapse
I was able to find the Kernel, thanks again.
Thank you my friend.
Wink
Were you over/under clocking?
I don't think the ICS kernels support that. I would get the same problem with the slide unlock screen, and all I did was change the governor, using the stock frequencies.
Sent from my Galaxy S II (i777)
Well I had SetCPU installled, but the Kernel does not support overclocking so I saw no need for the application and removed it.
I started from scratch, I did a factory wipe/ cleared Dalvik cache and reinstalled the ROM, both versions 2.0.1 and 2.1, also the mail fix. I installed the modem that shows the best performance where I live now, and also installed Entropy's new Kernel (again at least from a cursory look it maxxes out at 1.2 GHz)
I'll know more after today, I'll post here tonight after work and we'll see how things are going now.
Wink
Well face unlock seemed to work perfectly, i'll chock it up to some strange code bug.
Odd thing my mic out would not work all day, however connected to headphones here at home it's working fine. I guess it could be the radio at work or a co-worker who is sick of my music who borked it so I can't use my phone as an MP3 player.
Overall I gotta say I am extremely happy.
Thanks all for your help!
Wink
Great thread title.
Thread title added.
I noticed I omitted it and tried to add it after the fact....
No such luck, sorry.
Hi LiLChris06 - Is the face unlock an app? If so do you think it would work on your gingerbread 2.3.6 rom?
Thanks
superdog404
superdog404 said:
Hi LiLChris06 - Is the face unlock an app? If so do you think it would work on your gingerbread 2.3.6 rom?
Thanks
superdog404
Click to expand...
Click to collapse
Doubt it would work, its meant for ICS.
Hi folks, well i have a problem with my E3D cdma, the touchscreen goes crazy anytime while i'm using it, i though it was the digitalizer but i noticed when i use recovry it works perfectly, i have changed my rom so many time, my specs are: Cool ICS V15 BASEBAND 2.95.651, Cool v5.3 kernel
I HOPE SOMEBODY CAN HELP ME
jasl191 said:
Hi folks, well i have a problem with my E3D cdma, the touchscreen goes crazy anytime while i'm using it, i though it was the digitalizer but i noticed when i use recovry it works perfectly, i have changed my rom so many time, my specs are: Cool ICS V15 BASEBAND 2.95.651, Cool v5.3 kernel
I HOPE SOMEBODY CAN HELP ME
Click to expand...
Click to collapse
I had the exact same problem the other day. Screen going crazy, recovery working fine.
Long story short - it's the digitizer. My phone is coming back to me from service today
I am running slim bean and I'm not sure if this is just me. My nfc works fine I can scan nfc tags no problem but when I try and beam something to another person it will send them into the settings app. That person can beam a file to another phone just fine. Do you think this is just me or is that a bug in the rom.
mine is just opposite
My problem is just opposite. On my att galaxy s2 i777 android beam is working but nfc not working . Any idea. I am using jelly bean shostock rom . Same rom on other galaxy s2 is working fine. Battery is not an issue here because same battery on the other phone works fine for nfc. any suggessions?mb
Issues here too
My Verizon GS4 can receive things beamed to it via nfc, but will not allow me to send things. It makes the noise, vibrates, but the normal screen-shrink-tap-to-send animation doesn't happen. Would love if anyone ran into this and figured it out already...