im working on building a cm7 kernel for the vibrant, but im having some trouble
i have th compiled zImage but new a ramdisk and recovery img to compile with the zImage into a boot.img
i know im supposed to sync the cm repo, but kernel.org is down and the with the roundabout way im literally getting 5kib/s max and even after leaving my computer on for like a day im not close to finishing the download
so my question is, can anyone instruct me on how to extract the recovery and ramdisk from the boot.img and then how to repack it or can someone upload it and tell me how to repack it?
thanks
Im trying to port cm7 to my device but it didnt have dnsproxylistener before so I added it to my boot.img and i flashed it with the rom and it goes straight to download mode. I want to know because I can than replace those files with my phones file. Thanks.
bump
Hi there guys,
I am having an issue and was wondering if someone could point me in the right direction, maybe to a tutorial or some decent info on this.
Anyways, I have been tinkering around and teaching myself about building kernels, and roms and just a short while ago finished compiling my first kernel. I have the zImage, and i have tried adding the zImage to Koush's AnyKernel updater.zip but when i try and flash it says failed but is not displaying any errors (Using TWRP recovery) Or I am doing this wrong and need to unpack and repack boot.img with the new zImage?
Any help is greatly appreciated, Thanks!:good:
(edit) I am building on Fedora 17
You answered your own question.
Unpack the boty.img and repack with new zImage
So I was in the right ball park at least.
Sent from my SGH-T989 using Tapatalk 2
Will fastboot boot boot.img work on the galaxy note for testing a kernel? In case I have a borked kernel I want to take precautions so I don't brick my device.
Sent from my SAMSUNG-SGH-T879 using Tapatalk 2
No to fastboot.
With a broken kernel you should still be able to button combo into recovery and just flash a working kernel .zip
Or..at the very least be able to boot download mode and use Odin to flash the kernel.
I have gotten the boot.IMG all packed back up and when I flash it, my phone just hangs up at the white Samsung logo screen and does not go any further. Does something in the ramdisk have to be edited?
Tapa-a-Talkit it... Galaxy Note...4.2.1
hello to all...i am new to this developing. i have a rom file in .zip format....inside it there is system folder. i want to convert this .zip into a system img file. is it possible?? actually i hav a phone on which sdcard is not getting detected. so cwm recovery wont work, niether adb is detecting that device, so i want to make a system img file from this rom so that i can flash it using fastboot. Plz help me
niranjand147 said:
hello to all...i am new to this developing. i have a rom file in .zip format....inside it there is system folder. i want to convert this .zip into a system img file. is it possible?? actually i hav a phone on which sdcard is not getting detected. so cwm recovery wont work, niether adb is detecting that device, so i want to make a system img file from this rom so that i can flash it using fastboot. Plz help me
Click to expand...
Click to collapse
For future reference, at the very least, state the device you have and or are having problems with. Makes things easier for people like me
What your asking for doesn't exist to my knowledge. However, you can extract the contents of the zip to your hard disk and use fastboot to flash the file "boot.img' which should be in the root of the zip you have. Everything else needs to be pushed via ADB to the /system partition. If your CWM is built correctly, ADB should detect your device when connected. That's assuming that you have your drivers installed already.
In reality, I don't think that what you are wanting to do can be done, however I don't know everything either. :silly: Best of luck
bill.weckel said:
For future reference, at the very least, state the device you have and or are having problems with. Makes things easier for people like me
What your asking for doesn't exist to my knowledge. However, you can extract the contents of the zip to your hard disk and use fastboot to flash the file "boot.img' which should be in the root of the zip you have. Everything else needs to be pushed via ADB to the /system partition. If your CWM is built correctly, ADB should detect your device when connected. That's assuming that you have your drivers installed already.
In reality, I don't think that what you are wanting to do can be done, however I don't know everything either. :silly: Best of luck
Click to expand...
Click to collapse
i am trying it for huawei u8180
shinobisoft said:
For future reference, at the very least, state the device you have and or are having problems with. Makes things easier for people like me
What your asking for doesn't exist to my knowledge. However, you can extract the contents of the zip to your hard disk and use fastboot to flash the file "boot.img' which should be in the root of the zip you have. Everything else needs to be pushed via ADB to the /system partition. If your CWM is built correctly, ADB should detect your device when connected. That's assuming that you have your drivers installed already.
In reality, I don't think that what you are wanting to do can be done, however I don't know everything either. :silly: Best of luck
Click to expand...
Click to collapse
I tried this using Livesuit 1.11 for a softwinerEvb a13 tablet (no other known device specs) and it said the image file was invalid. Situation is I soft bricked my tablet by flashing the wrong cwm zip. Finally found out how to connect via Livesuit (kinda like fastboot or bootloader mode or something? like Odin?) to flash stuff to it. I decided to use an erase img .img because where I found how to connect it suggested that to the OP (on techknow). So now instead of the tablet just being stuck on the first screen when trying to boot (normal or recovery), it doesn't do anything at all since there's no boot.img. Which I'm not worried about since It connects to my laptop just fine via livesuit still so I can get a boot on it (ADB won't detect it - pretty positive it's not ADB user error [I run cmd "adb root" when the tablet is connect in whatever mode its in - the way livesuit detects it - and adb says no device found]. BUT I can't find a stock firmware/rom/boot.img for it anywhere (mainly since there's a bunch of clones of this tablet). I'm downloading a few roms (in boot.img format? - .7z files) that I found for "this" tablet (meaning the devs don't know which clones which roms work on lol).
ANYWAY haha, my question is, is there a way to do what you said in the above quote that will work in my situation? I'm not advanced enough to know why livesuit says the image is invalid. I tried it with a cm10.1 zip made for this tablet and a cwm zip made for this tablet (for both I extracted the files and then tried flashing the boot.img I found in the directory(extracted folder right?) via livesuit. livesuit said image file invalid for both .img's.
Please help me and THANK YOU in advance.
I'm open to anyone's help and any help is much appreciated! Thanks buttons will be pressed!!!
Same situation
Same Situation but I know the Specs,, It is allwinner A10 .and Stuck in the soft brick
could you solved this problem? i need a help too, the same problem
---------- Post added at 09:21 PM ---------- Previous post was at 09:13 PM ----------
vennkis said:
Same Situation but I know the Specs,, It is allwinner A10 .and Stuck in the soft brick
Click to expand...
Click to collapse
Hi, could you solved that?
i have a Chinese tablet a10, i have repaired different tablets and android phone trough ADB, but this devices is not detected, i have download some software to help me download the tablet drivers, but hasn't possible that.
finally the only source i have, is charge the firmware again, i use phoenix , and i have some rooms in zip format, what can i do for convert to IMG format?
Hello everyone
Finally what can we do?
How to convert .ZIP to .IMG ?
how to convert?
m.morcielago said:
Hello everyone
Finally what can we do?
How to convert .ZIP to .IMG ?
Click to expand...
Click to collapse
m.morcielago said:
Hello everyone
Finally what can we do?
How to convert .ZIP to .IMG ?
Click to expand...
Click to collapse
hahaha...no answer....i am still waiting for this software
doelwit.sunny said:
hahaha...no answer....i am still waiting for this software
Click to expand...
Click to collapse
You know just converting is not enough
I can convert it
But you need "partition table" for making .IMG
So we don't have it
check sdat2img and imgpatchtools
Hello there,
I accidentally flashed a wrong boot.img with sp flash tool. I can still acces CWM based recovery. I do not have a ROM or boot.img backup and was unable to find either one online. The phone is an Alcatel one touch 916D, since Alcatel is open source, I downloaded the source code something.xz file (sourceforge.net/projects/alcatel/files/OT_991D_20120718.tar.xz/download), it should be possible to flash this to my phone using Odin right? I tried so, but Odin does not detect my phone. So I was wondering, is it perhaps possible to extact/create a boot.img from the source code file I have? I unzipped it and there are the folders kernel, mediatek and webkit. I have not found a boot.img anywhere in the files. I hope someone is able to help me.
thank you,
Jeroen
PS: If someone has the boot.img or can extract it from his/her phone that'd be even better