So I don't exactly understand what I am doing wrong.
I power off the device, hold down Vol+, insert the USB cable, release Vol+.
The screen stays blank, and Windows finds "Nokia DLOAD". I have NCS and NSS installed.
Now the problem is - after about 20 seconds, the phone just reboots by itself and boots to WP7.
This is without me doing anything. During this time I can see the device in NSS.
Tried with battery in, and battery removed...
Any ideas?
If I keep holding down the vol up button, it just reboots every 20 seconds....
Figured it out - the moment I saw the device, hit install in NSS and with Qualcomm loader it no longer reboots by itself
Related
I've tried to plug in the phone with vol+ button pressed, but what it does is only long vibe and then nothing happens. Only "Windows Phone" device is shown in Devices and printers. After few seconds the phone switches on as normal. I can't also update software with zune as well beacause of the error 80070424. I've tried NSS and NCS but both of them are forcing me to switch to the recovery mode.
1.) Turn phone off
2.) Press and Hold Vol Up + Power until you feel a short vibrate then let go of the buttons
3.) Plug in USB to phone
It just turns on the phone as usual
Hi silkoo,
What kind of phone do you have, I mean is it a Lumia 710 or a Lumia 800 ?
Greetz,
Hi!
It's lumia 800.
silkoo said:
I've tried to plug in the phone with vol+ button pressed, but what it does is only long vibe and then nothing happens. Only "Windows Phone" device is shown in Devices and printers. After few seconds the phone switches on as normal. I can't also update software with zune as well beacause of the error 80070424. I've tried NSS and NCS but both of them are forcing me to switch to the recovery mode.
Click to expand...
Click to collapse
probably lost the test drivers instaalado these have some luck friend, sorry my English is google.
Hi,
I'm new here.
I have an issue. My Android phone is bricked. It is an MT6515 phone; model i9270+ (Chinese dual SIM phone).
I had trouble rooting it, so I was half way there following steps in THIS thread.
To see more specs. about this phone check HERE (chrome tells me that this site has malware, but I ignored it...)
On to the issue...
I accidentally flashed my phone with the wrong boot image from fast boot ("fastboot flash boot boot.img"). I had a clockwork mod backup copy of my own boot.img, so I just wanted to reflash it. Fastboot said that the flash failed.
I tried again, and then in the middle of the process my command prompt stalled. Phone was in flashing process for about an hour, so I hit Ctrl+C to stop it... I wanted to do a recovery from the phone itself using clockwork recovery...
When I wanted to boot my phone there was no screen light. The phone just vibrates twice and that's all.
PC won't recognize it, so I can't go back to fastboot mode. Key combination (vol up + power) won't bring fastboot mode...
This phone seems completely bricked...
Is there anything I can do to "revive" it?
I googled my issue, but I couldn't find anything useful. All simple solutions like getting the battery out for an hour, holding some weird key combinations, plugging it in USB on a different port, and such didn't get me any results...
Can anyone help me, please?
Thanks in advance!
More info...
Ok, I've just tested few more things:
When just holding a power button - phone vibrates once, and second time about 4 seconds after
When the battery is out and the phone is on USB - it does nothing
When the battery is in and I plug the USB (without pressing power) - it vibrates once, and second time about 1 second after
When holding Vol Up + Power (on this phone this is entering to fastboot) - does nothing
When holding Vol Up and plugging USB - PC recognized it as "SCI USB2Serial (COM10)" device, and the driver installation failed.
Before I typed this whole post PC recognized my phone as "unknown device", and the driver installation also failed.
Commant "adb devices" or "fastboot devices" does not recognize the phone while being plugged on USB.
When I plug it on electrical charger it vibrates twice just like pressing the power button.
Programs like "MTK Droid Root & Tools" do not recognize it...
Can anyone help me?
How to input in a new software? I have Boot.img, System.img and Recovery.img ...
@Admin -> you can close/delete this thread
I sold my phone... Some dude needed speakers, display and touch digitizer, so I this phone was of some good use for him
I tried to flash twrp and now my phone is stuck in a 5 second boot loop.
Fastboot and recovery can't be accessed at all no matter what combination I make. vol+ power, vol- power, both +- power, hold 40 secs 60secs (useless because phone reboots in 5 secs) , all tried. Every 5 seconds it just boot loops. Help me.. I have it for less than a week. Wanted to flash only because the stock rom was giving problems such as landscape and auto random reboots.
I even tried a script which said would wait in adb detect mode, that didn't work. Guess phone rebooted before my pc could detect it. Tried installing intelSOC method as suggested in another thread, the short reboot is tough to get by.
By the way, it's an umidigi china phone.
bump.. pls help!
Hi , let your battery to completely empty , press vol + and plug usb to see if phone goes into Fastboot mode if not try Vol - and plug usb .
Both didn't work. But thanks.
Teddy Lo said:
Hi , let your battery to completely empty , press vol + and plug usb to see if phone goes into Fastboot mode if not try Vol - and plug usb .
Click to expand...
Click to collapse
sm-t870 unlocked/rooted stuck in bootloop
cannot enter recovery or download mode, or even seem to shut the tablet completely off.
any combination of buttons turns the tablet on with the message "bootloader is unlocked press power key to continue"
so holding power+volUP, must be let go to press power which seems to interrupt the button combination
power+volDOWN seems to shut the tablet off for 5 seconds but it automatically turns back on.
having plugged into laptop seems to make no difference.
help!
Hi man, have you fixed this issue? I'm having the exact same problems as yours. I updated my Magisk it just went bootloop.
Thanks!
Plug into PC then Power+Volume Up got me into recovery mode
I tried to root my phone by magisk.
After flashing a patched boot.img, it's failed to boot into system and I got a message that "the device need factory reset". I clicked yes and everything seems ok,I can boot into system. Then I tried to flash img again. So I boot into bootloader. Unfortunately, this time I got a black screen. The phone doesn't response me anymore.
I tried the software repair in xperia companion but It cannot dected my phone when I hold on volume down and plugged in it. I also tried hold on volume up + power but nothing happened. Hold on power key also no response. The led light always black, only become red when I connect it to my pc.
What should I so now and what's my phone's status? I searched something about 9008 mode and edl but I don't know how to check whether my phone is really turn into that status, my pc cannot dect my phone.
Have the same problem, only with the 5 iii instead. Still looking for a fix.
Try to switch the phone off; then just plug it into your PC without holding the Vol- key. It has happenned a couple of times with me that the phone does not want to boot up, with attempts to get it into FLASH mode by holding the key down throwing more confusion into the mix.
I think there is a low battery protection. Make sure the phone is charged up. Keeps the device from death during a flash.
Red led mean a very low battery. Keep it plugged (not to PC but to power adapter) for 2-3 hours and then try again a force reset.
Never, never try flash or other stuff under 50% battery
Also force restart is keep pressed vol+ and power button (or vol- and power button) till you fell a vibration.
Try this after a good charge
Evil_Sephiroth said:
Red led mean a very low battery. Keep it plugged (not to PC but to power adapter) for 2-3 hours and then try again a force reset.
Never, never try flash or other stuff under 50% battery
Also force restart is keep pressed vol+ and power button (or vol- and power button) till you fell a vibration.
Try this after a good charge
Click to expand...
Click to collapse
It might require experimenting with service modes and different chargers. I had an early Xperia 1 III that bootlooped while charging after setting up the fingerprint reader. It seems that charging is disabled during booting. It has to finish or enter a service/fault mode.
my phone is having this after doing fastboot --slot=b reboot recovery (which actually I had to do fastboot --set-slot=b and then fastboot reboot recovery). the notification light blinks red. have tried vol up + power, vol down + power, and vol up + down + power for like 30 seconds and nothing
tomatoketchup said:
my phone is having this after doing fastboot --slot=b reboot recovery (which actually I had to do fastboot --set-slot=b and then fastboot reboot recovery). the notification light blinks red. have tried vol up + power, vol down + power, and vol up + down + power for like 30 seconds and nothing
Click to expand...
Click to collapse
I feel sorry for you brother...such a nice device...OK let's talk what happened, the state now your device is in is called hardbrick and it had a corrupted bootloader or no boot loader, but your device is still alive, in your PC in device manager it lists as Qs USB mode with some number after it like qsusb9008...now this device can only be brought to life with the help of a blankflash file which can flash your boot loader in snapdragon service mode...actually no snapdragon can be hardbricked permanently now you need appropriate blankflash file for your device.. Please don't open the device if some repairmen suggests to do JTAG nothing is necessary all you need is blankflash file which is shared to only Sony testers groups.... Who tests ROMs before release and they hardbrick so they share those files to them.... Please don't loose hope....it takes time but certainly it can be bought back to life... And dont try any flashing utility as there is no functional boot loader on it now and nothing will work...Sony won't provide that for sure and they will say then can only solve by mother board replacement ,don't believe therm your device is perfect it only needs blankflash file as it entered into final safe mode... I ain't regular on XDA if you need any info contact me via my mail [email protected] g ma I'll .com
Have any of you tried this - https://developer.sony.com/develop/open-devices/get-started/flash-tool/download-flash-tool/
ok in my case it was the charging IC