Brick after flash GB firmware - Sony Ericsson Xperia Neo, Pro

I have brick my phone please help me i istallate FW 4.0.2.A.0.62 with flashtool and when i try to power on the phone the LED turn on and turn off with don't do nothing.... i can enter only in flashmode and flash other firmaware but if i flash one firmaware don't change nothing....
help me sorry for bad english but i'm very worried

i couldn't really get the problem
by led turning on/off what do you mean? is the color blue ?
do you see sony ericsson writing when you try to turn it on?
have you unlocked the bootloader ?

flash stock tft. it will revert you phone to stock factory status.
tick "NO Final Verification"

rik994 said:
I have brick my phone please help me i istallate FW 4.0.2.A.0.62 with flashtool and when i try to power on the phone the LED turn on and turn off with don't do nothing.... i can enter only in flashmode and flash other firmaware but if i flash one firmaware don't change nothing....
help me sorry for bad english but i'm very worried
Click to expand...
Click to collapse
What was your phone configuration before you flashed 0.62 on it?
Kernel, Rom, unlocked bootloader?
Gesendet von meinem MT11i mit Tapatalk 2

Related

[Q] phone stuck on SE logo after install custom rom

i installed custom kernel and after its done the phone got stuck on sony ericsson logo. i try'd to enter xrecovery and he wont let me then i try'd flash it back to stock firmware on flashtools but he asked me to turn on phone and enable usb debugging and unknown resources but i cant activate the phone what can i do
then i try the update service but it tells me that my phone is updated
the phone was rooted and everything before
please help!!
pshay8 said:
i installed custom kernel and after its done the phone got stuck on sony ericsson logo. i try'd to enter xrecovery and he wont let me then i try'd flash it back to stock firmware on flashtools but he asked me to turn on phone and enable usb debugging and unknown resources but i cant activate the phone what can i do
then i try the update service but it tells me that my phone is updated
the phone was rooted and everything before
please help!!
Click to expand...
Click to collapse
no vibrate when turn it on??
no green led while get into flash mode??
It we call hardbrick...
find any workshop with JTAG cable
if u can see SE white logo..
that mean u can try SE PCC first..
vibrate yes
green led yes
and he stuck in this white logo
do you mean pc companion? tryd it also. not working
Do you have Xrecoivery or CWM installed? If yes, you have to mount the SD card for Pc companion recognizes your phone..!
icerebro said:
Do you have Xrecoivery or CWM installed? If yes, you have to mount the SD card for Pc companion recognizes your phone..!
Click to expand...
Click to collapse
yeah, i'm also stuck in this process~~~who can help us!!!!!!! I cannot go through the PCC cos it kept asking me to mount the sd card~but I cannot log into the phone system...
No bro, he meant to use CWM or Xrecovery and use it to mount usb. there is an option if you enter mounts and storage --> mount USB storage in cwm. i am not sure about xrecovery
Please please, dont panic, if you get tension then you wont concentrate on the matter you are doing. Relax!
Tommylee567 said:
No bro, he meant to use CWM or Xrecovery and use it to mount usb. there is an option if you enter mounts and storage --> mount USB storage in cwm. i am not sure about xrecovery
Please please, dont panic, if you get tension then you wont concentrate on the matter you are doing. Relax!
Click to expand...
Click to collapse
cheers mate! just figured out how to use FlashTool to solve the problem~ now my lil mini is back to normal~~
was following these instruction: http://forum.xda-developers.com/showpost.php?p=17674938&postcount=3360
help plszz
nelikp said:
no vibrate when turn it on??
no green led while get into flash mode??
It we call hardbrick...
find any workshop with JTAG cable
if u can see SE white logo..
that mean u can try SE PCC first..
Click to expand...
Click to collapse
hey frnd the same problem is wid me i installed Shin Engine™ Feat Rieska Nico Robin dis rom and now i bricked my my phn i guess no exrecovery working nothing working when i start my phone it justs vibrate and stucks on logo of SE even phn is not getting charged and no led lights i didnt flashed the kernel which was required for using dis rom plszz help me some one plsz....
pshay8 said:
i installed custom kernel and after its done the phone got stuck on sony ericsson logo. i try'd to enter xrecovery and he wont let me then i try'd flash it back to stock firmware on flashtools but he asked me to turn on phone and enable usb debugging and unknown resources but i cant activate the phone what can i do
then i try the update service but it tells me that my phone is updated
the phone was rooted and everything before
please help!!
Click to expand...
Click to collapse
i think this
http://forum.xda-developers.com/showthread.php?t=749438
Soft Bricked ma se w8
plsz can any one help me how to solve this problem plsz
Hi guys, 1st u should try to clean everything, like wipe all things. then try to reboot. If u cant make it work, try to flash other ROM. if u it is still the same, the last thing u can do is, repair it using pc companion. u will get the fresh stock firmware from S.E.
p/s But make sure u read all the installation guide if u want to install custom ROM or flash a custom Kernel.
I think in case when you are stuck with the sony logo there s no need to turn on usb debugging options coz i just did get stuck like that. connected it in flash mode { the green light} and then flashed a global ftf and it worked...
I think the problem when you get stuck in the logo is because the rom was not installed correctly, happened to me once and just doing the download again and installing the rom without flashing the kernel solved the problem
HELP! after installing viper rom to my xperia ray i got stuck on sony logo =/

Xperia mini pro boot problem! Help pls

hi,
I have a problem with the Xperia mini pro, when I try to flesh the phone show me "turn on Unknown Sources and Debugging" I know what they should do but I have a problem that can not turn on the phone and can I change this setting, the phone I accidentally turned off and no longer can you turn it on, and now i'm interested in how to fix the phone i do not have to wear it at the master. Excuse the bad English
flash cwm enabled kernel through fastboot and some rom through CWM
Try to flash by setool
Use a fastboot.
Sent from my WT19i
miron92 said:
hi,
I have a problem with the Xperia mini pro, when I try to flesh the phone show me "turn on Unknown Sources and Debugging" I know what they should do but I have a problem that can not turn on the phone and can I change this setting, the phone I accidentally turned off and no longer can you turn it on, and now i'm interested in how to fix the phone i do not have to wear it at the master. Excuse the bad English
Click to expand...
Click to collapse
I assume you are using flashtool to do it which shows you that message?
1st thing 1st, your phone can still go into fastboot mode? (turn of your phone, wait couple of seconds, then turn on while holding volume up button. When in fastboot, LED will show blue colored)
If yes, then flash using fasboot a custom kernel that comes with cwm (plenty to choose. Rage, krsh, nerodroid, xkernel etc ). How to? Plenty in dev section. Included instruction to do so on the first page of the thread for that kernel.
Once done, turn off or reboot and go into cwm.
Flash ROM (custom or stock. Your choice).
Reboot.
Your bootloder need to be unlocked to flash custom kernel. If you dont want to unlock it, then flash stock kernel. See if can go through.
If your phone cant even go into fastboot, cannot turn on AT ALL, that should be hardware problem. Bring it to service centre or any repair shop.
Good luck.
Sent from my SK17i using XDA App
If your bootloader is lockt you can use SEUS to fix the software on your device.I had this same problem and this was the resolution.
If you have unlocked your phone, you should relock it first, and then follow piotrasss87 method. otherwise you can use SEUS or flashtool to flash back. I think you should check your usb driver and try another ftf.

Xperia U bricked

Hello,
First of all sorry for my bad english.
I rooted my xperia u. Afterwards i flashed it with an error. Now the phone won´t start again. It display the sony logo and then it restart again and again.
Thanks for help
Just re flash it again. It won't be bricked. Hold up and power button until it vibrates 3 times to turn it off properly
Sent from my LT26i using Tapatalk 2
Another Problem
So now i have another Problem. I flashed back to the stock firmware. Then I loaded the app Root checker: it says no, your phone isn´t rooted. So i was happy and thought now i can update my phone... But it don´t work.
Thanks for help
For install official updates, need locked bootloader with stock firmware and kernel!
Relock your bootloader by flashing this : http://doomlord.sylvester20007.com/xperia_s/Xperia-S_Relock_bootloader.ftf in flashtool.
Sent from my LT26i using xda app-developers app
me 2
i am als haveing problems whit my xperua u (st25i)
i deleted accidentally my system folder and than turned of my phone now when i try to stard up it gives the sony logo and over and over again
when i try to flash my phon it stays only about 10 seconds in flashmode but when ( fast boot works 100% i think cause blue light stays on ) and my boot loader is unlocked can some one help me whit this
already tried installing tft file doesnt work
luc timmen said:
i am als haveing problems whit my xperua u (st25i)
i deleted accidentally my system folder and than turned of my phone now when i try to stard up it gives the sony logo and over and over again
when i try to flash my phon it stays only about 10 seconds in flashmode but when ( fast boot works 100% i think cause blue light stays on ) and my boot loader is unlocked can some one help me whit this
already tried installing tft file doesnt work
Click to expand...
Click to collapse
U r not connecting it properly
Switch off phone
Go to flash tool select ftf.... Click on ftf...
Flashtool will ask u to connect ur phone
Now connect ur phone to usb with volume down button pressed...
Sent from my ST25i using Tapatalk 2
I had the same problem..
Reflashed stock ics and the phone starts again..
Sent from my ST25i using xda app-developers app

[Q] Need help getting my Sony Xperia U to boot...

Well Hi,
I've been trying to flash a rom on my phone yesterday, and I've unlocked the bootloader and installed CWM Touch v5.5.0.4, I then tried to flash TheBrainsRom v10 but my xperia was stuck in bootloop, it opened the sony splash screen, then a nexus splash screen then a sony splash screen and etc. So now, I tried solving the problem by flashing this kernel on http://forum.xda-developers.com/showthread.php?t=2028139 "Other method to root just flash this kernel (B54) via fastboot and you are rooted : here" And that didn't work out too well, i'm now stuck in a bootloop at the sony splash screen. But strangely enough, I can still access the cwm recovery.
As for my phone it's a sony xperia U (ST25i) 6.1.1.b.1.10
Thanks for reading this, and please help me if you can :S
youssefkiev said:
Well Hi,
I've been trying to flash a rom on my phone yesterday, and I've unlocked the bootloader and installed CWM Touch v5.5.0.4, I then tried to flash TheBrainsRom v10 but my xperia was stuck in bootloop, it opened the sony splash screen, then a nexus splash screen then a sony splash screen and etc. So now, I tried solving the problem by flashing this kernel on http://forum.xda-developers.com/showthread.php?t=2028139 "Other method to root just flash this kernel (B54) via fastboot and you are rooted : here" And that didn't work out too well, i'm now stuck in a bootloop at the sony splash screen. But strangely enough, I can still access the cwm recovery.
As for my phone it's a sony xperia U (ST25i) 6.1.1.b.1.10
Thanks for reading this, and please help me if you can :S
Click to expand...
Click to collapse
Did you do a full wipe via CWM?
mirost1 said:
Did you do a full wipe via CWM?
Click to expand...
Click to collapse
Yes, I did. :L
EDIT: I just saw that the recovery I'm using isn't for my firmware version... Should I flash an older version, even if this one works fine?
I did another full wipe, and reflashed the rom. But it's now stuck in the other bootloop the one that shows the sony splash screen, then the nexus splash screen.
By any chance, while installing ROM, did you wipe System ? I think thats the likeliest thing.
And dude, try flashing stock FTF with Flashtool It might help
Yeah flashing ftf solves everything
Sent from my ST25i using Tapatalk 2
Ok, I will do that, but how? And no, I didn't wipe System. Thanks for your help guys And if anyone can explain to me how to flash the stock ftf, please do.
Follow these steps
1) Start Flashtool
2) Click the Lightning icon then select your FTF
3) Exclude baseband if your device is STxxi and the firmware is for STxxa or viceversa
4) Press ok and start Flash. Then, after a minute or so, Flashtool will ask you to connect the device.
5) Turn off the phone. Connect the usb cable to the PC (not connected to Phone yet)
6) Holding down the "Volume Down" key, you connect the cable to your phone.
7) Give it a few seconds and a Green Light shows up. Then, flashing starts on Flashtool
8) Once flashtool starts flashing, you can stop holding down the Volume Key
9) Wait for the process to finish then unplug the phone and turn it on
That ought to solve your problems. The stock FTF can be found in Dev section of your phone. I'd recommend C.1.0 version as its newer
Min3r said:
Follow these steps
1) Start Flashtool
2) Click the Lightning icon then select your FTF
3) Exclude baseband if your device is STxxi and the firmware is for STxxa or viceversa
4) Press ok and start Flash. Then, after a minute or so, Flashtool will ask you to connect the device.
5) Turn off the phone. Connect the usb cable to the PC (not connected to Phone yet)
6) Holding down the "Volume Down" key, you connect the cable to your phone.
7) Give it a few seconds and a Green Light shows up. Then, flashing starts on Flashtool
8) Once flashtool starts flashing, you can stop holding down the Volume Key
9) Wait for the process to finish then unplug the phone and turn it on
That ought to solve your problems. The stock FTF can be found in Dev section of your phone. I'd recommend C.1.0 version as its newer
Click to expand...
Click to collapse
Thanks for your help But do you have any idea where I can find the 6.1.1.c.1.0 version? I can only find one for t-mobile, croatia. I've been looking for one for quite some time now.. :L
youssefkiev said:
Thanks for your help But do you have any idea where I can find the 6.1.1.c.1.0 version? I can only find one for t-mobile, croatia. I've been looking for one for quite some time now.. :L
Click to expand...
Click to collapse
Well, you could download the update using SEUS and then make a ftf from it.
That is b.1.10 not C.
As far as I know c.1 is specific firmware made specially for T-Mobile Croatia and the only c.1 on this forum for now.
tadeas482 said:
Well, you could download the update using SEUS and then make a ftf from it.
Click to expand...
Click to collapse
Umm, I can't even connect the phone for seus to recognize... :S It gets recognized when i'm in recovery mode, but it thinks my phone is an xperia go
ljubanve said:
That is b.1.10 not C.
As far as I know c.1 is specific firmware made specially for T-Mobile Croatia and the only c.1 on this forum for now.
Click to expand...
Click to collapse
Well there's this one: http://forum.xda-developers.com/showthread.php?t=2028139 would that be alright? Off-topic: I miss Croatia :'( Very nice country
Hey bro,
Installing C.1.0 is quite fine on any device T-Mobile branding is minimal and can be easily removed Its the fastest of the 3 stock f/w in my opinion and least buggy I recommend you go with that one
Cheers
youssefkiev said:
Well Hi,
I've been trying to flash a rom on my phone yesterday, and I've unlocked the bootloader and installed CWM Touch v5.5.0.4, I then tried to flash TheBrainsRom v10 but my xperia was stuck in bootloop, it opened the sony splash screen, then a nexus splash screen then a sony splash screen and etc. So now, I tried solving the problem by flashing this kernel on http://forum.xda-developers.com/showthread.php?t=2028139 "Other method to root just flash this kernel (B54) via fastboot and you are rooted : here" And that didn't work out too well, i'm now stuck in a bootloop at the sony splash screen. But strangely enough, I can still access the cwm recovery.
As for my phone it's a sony xperia U (ST25i) 6.1.1.b.1.10
Thanks for reading this, and please help me if you can :S
Click to expand...
Click to collapse
V10 of my Rom is for b54 or c10 firmware.
Not wondering if you stuck in bootloops if you not proceed acc. To my Rom instructions.
Thanks everyone! I flashed the stock ftf and then flashed thebrainsrom v10 and everything works great!

Xperia P black screen with no Sony logo after flashing

I have a old Xperia P I want to revive, but the issue is it is locked, and I want to reset it. I flashed the 4.1.2 India and MEA rom, still doesn't turn on after it has flashed, I tried using different drivers and older flashtool, it flashes but when I turn it on, the backlight is on but no Sony logo and it stays there, any fixes
auaubykddi said:
I have a old Xperia P I want to revive, but the issue is it is locked, and I want to reset it. I flashed the 4.1.2 India and MEA rom, still doesn't turn on after it has flashed, I tried using different drivers and older flashtool, it flashes but when I turn it on, the backlight is on but no Sony logo and it stays there, any fixes
Click to expand...
Click to collapse
You have yo use an old version of flashtool to make it work, is problem is firmware, tomorrow I'll paste here the link for download the flashtool version that I use and the ROM

Categories

Resources