Hi all,
if I recharge the phone when it is off, I'd like to avoid the boot when I unplug the device from the wall. Is it possible to do this?
idro_stasi said:
Hi all,
if I recharge the phone when it is off, I'd like to avoid the boot when I unplug the device from the wall. Is it possible to do this?
Click to expand...
Click to collapse
No because that boot is required for the os to load and optimise all applications and system files on your phone. So when you turn on the phone you can‘t avoid the boot.
Sent from my LG-P500 using Tapatalk 2
Christian Nothing said:
No because that boot is required for the os to load and optimise all applications and system files on your phone. So when you turn on the phone you can‘t avoid the boot.
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
I'm sorry, I'll try to explain better: the problem is that when I recharge the phone when it is turned off, when I unplug it from the wall, it reboots and turns on, but I'd like it remains turned off.
Which Rom are you using??
rr0yy said:
Which Rom are you using??
Click to expand...
Click to collapse
Cyanogenmode 7.2
Remove battery before unplugging and put it back after
Sent from my LG-P500
vlt96 said:
Remove battery before unplugging and put it back after
Sent from my LG-P500
Click to expand...
Click to collapse
So that means there's no software options to avoid the reboot?
idro_stasi said:
So that means there's no software options to avoid the reboot?
Click to expand...
Click to collapse
Really have no idea.. if you want to keep your phone off for a long time at 100%, it is not recommended, best is if you charge to 30-50% to store it (laptop advice, and phone hae same type of battery)
Sent from my LG-P500
Strange!! I never faced such an issue!!
Make nandroid backup. Reflash the latest rom with complete wipe.. battery data wipe too.
See if you still have the problem. If yes flash different kernel and see if its rectified!!
rr0yy said:
Strange!! I never faced such an issue!!
Make nandroid backup. Reflash the latest rom with complete wipe.. battery data wipe too.
See if you still have the problem. If yes flash different kernel and see if its rectified!!
Click to expand...
Click to collapse
I remember that I followed all the steps correctly when I done the flash. So what do you think if I do only the complete wipe without flashing again?
Complete wipe. After you erase data and system.. nothing will be left. You wont be able to boot.
Related
hi, ytd after i charge my phone i went to off my phone and my will auto on after it is off even i reinsert the battery?
how do i solve it?
thx
Hi,
i am not sure, if I understood you properly - please be more specific or use simplier sentences.
I guess that if your phone is fully charged and you turn it of, it will self power on? Right?
jincao said:
hi, ytd after i charge my phone i went to off my phone and my will auto on after it is off even i reinsert the battery?
how do i solve it?
thx
Click to expand...
Click to collapse
HeliumX10 said:
Hi,
i am not sure, if I understood you properly - please be more specific or use simplier sentences.
I guess that if your phone is fully charged and you turn it of, it will self power on? Right?
Click to expand...
Click to collapse
ya...u are right...
jincao said:
ya...u are right...
Click to expand...
Click to collapse
Good
Which ROM are you using? Have you tried wiping dalvik-cache and cache partition using xrecovery? It solves most of any issues...
HeliumX10 said:
Good
Which ROM are you using? Have you tried wiping dalvik-cache and cache partition using xrecovery? It solves most of any issues...
Click to expand...
Click to collapse
i did try wiping dalvik-cache and cache partition using xrecovery. i using X10S V9 by Championswimmer - Tof37 - Wo88les
hi everybody.
i'm not new in this forum but i onl now registered so i cant post in the android development section ( or so the site says)
i have a Samsung Galaxy S II ( GT-i9100)
i was using a CM10 based Paranoid android Rom for a long time and it was great.
a few days ago i wanted to use a new ROM - [ROM 4.1.2 - 4.2] JellyBam - 20121115 [AOKP.CM10.PARANOID] [AROMA] [SPACESTYLE]
i did exactly what the instructions said :
Put Rom zip in internal SD
wipe data + cache + Dalvik
install rom - using siyah Kernel 5.0.1
after the install the Rom lodas fine and seems to work great but after the first time i need to restart the phone it get stuck in the boot animation
i tried doing another Cache + Dalvik wipe after the install but it still happens
when i was searching the Rom's Forum , no one seemed to had the same problem, and that is why i am posting this here.
if any one can help i will be grateful.
thanks in advance
shlomo
p.s.
for now i went back to a Nand backup of my old rom...
hi there.
i manged to fix the first problem by flashing the rom with a different kernel - Dorimanx...
but now i have a different problem
everytime that i turn the phone on i get the messege "upgrading android"
and there are times that the phone turnes off for no reason (mainly when i get incoming calls)
and after that when i turn it back on again the battary is almost dead - today it happened when i had 70% and when i turned in back on the battary went down to 4%!!!
what can i do???
1.Wipe data/factory reset
2.Format /system
3.Flash the ROM (choose whatever Kernel in aroma)
4.Wipe cache
5.Wipe dalvik
6.Restart
Try that.
edit: oh and if the battery problem persists, calibrate your battery (there are plently of guides out there i'm sure you can find)
Thankx for the help, ill try that (again). Just a few questions.
Do you recommend a specific kernel (if j usr siyah i seem to get a bootloop)
What guide do you recommend to calibrate the battary, there are allot of them out there that i dont kbow which to use
Thanks again.
Sent from my GT-I9100 using xda app-developers app
shlager_5321 said:
Thankx for the help, ill try that (again). Just a few questions.
Do you recommend a specific kernel (if j usr siyah i seem to get a bootloop)
What guide do you recommend to calibrate the battary, there are allot of them out there that i dont kbow which to use
Thanks again.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
u can use Dorimanx v7.22 kernel ma8
also battery callibration apps will not aid u in any way on ur SGS2, since it comes with seperate Fuel gauge chip
u can use the 'Stweaks' app that comes with the Dorimanx kernel and do a 'Reset Fuel gauge chip' in it to have a better reading with ur battery
Sun90 said:
u can use Dorimanx v7.22 kernel ma8
also battery callibration apps will not aid u in any way on ur SGS2, since it comes with seperate Fuel gauge chip
u can use the 'Stweaks' app that comes with the Dorimanx kernel and do a 'Reset Fuel gauge chip' in it to have a better reading with ur battery
Click to expand...
Click to collapse
thanks for the advice about the kernel, ill do that
about the fule guge chip - what exacatly does it mean that the phone have a separate one? and if i do reset it using ths stweaks, than what - is that all it takes to recalibrate the battary?
shlager_5321 said:
thanks for the advice about the kernel, ill do that
about the fule guge chip - what exacatly does it mean that the phone have a separate one? and if i do reset it using ths stweaks, than what - is that all it takes to recalibrate the battary?
Click to expand...
Click to collapse
You can reset the fuel gauge chip, and if it doesnt work you can try the following: charge the battery to 100%, leave it on the charger. Go to recovery, wipe battery stats under advanced. Reboot, unplug from charger.
Hope it helps.
Edit: I think I read somewhere that its recommended to leave the battery to fully discharge after wiping bat stats (let the phone turn itself off) and then recharge again.
Sent from my GT-I9100
boki9999 said:
You can reset the fuel gauge chip, and if it doesnt work you can try the following: charge the battery to 100%, leave it on the charger. Go to recovery, wipe battery stats under advanced. Reboot, unplug from charger.
Hope it helps.
Edit: I think I read somewhere that its recommended to leave the battery to fully discharge after wiping bat stats (let the phone turn itself off) and then recharge again.
Sent from my GT-I9100
Click to expand...
Click to collapse
hi .
i did what you said and for some reason it erased my External SD card.... where i had all my backups!!
edit: first few times it worked well... now i have a bootloop again and nothing works....
another Edit : figured it out. it didnt erase my External SD, i Just can mount it. not from the system itself and not from the recovery either...
when i connect the phone to my PC it dosent show up also
Why don't you try Rootbox? Jelly bam is based on it anyway, why not try the rom from the dev instead of a cook
Sent from my GT-I9100 using xda premium
shlager_5321 said:
hi .
i did what you said and for some reason it erased my External SD card.... where i had all my backups!!
edit: first few times it worked well... now i have a bootloop again and nothing works....
another Edit : figured it out. it didnt erase my External SD, i Just can mount it. not from the system itself and not from the recovery either...
when i connect the phone to my PC it dosent show up also
Click to expand...
Click to collapse
I really dont know why that happened. I wiped mine like hour and a half ago and nothing bad happened.
Sent from my GT-I9100
kilometers4 said:
Why don't you try Rootbox? Jelly bam is based on it anyway, why not try the rom from the dev instead of a cook
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
can you post a link for the Rom's thread?
shlager_5321 said:
can you post a link for the Rom's thread?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=34458938
For the best results follow the instructions on the op
Sent from my Nexus 7 using xda premium
kilometers4 said:
http://forum.xda-developers.com/showthread.php?p=34458938
For the best results follow the instructions on the op
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
well... tried Rootbox and i gotta say its a nice rom.
bot not more then that... the paranoid android settings are all wonky there and i still get many bootloops - even you can work around them by turning on and off...
going to try P.A.C Rom
any advice would be appreciated
Edit: well, tried P. A. C Rom, worked well to start with. But then again it started a bootloop for no reason... For now went back to a nand backup of jellybam from 16/11 that seems to be the most stable. Why does this keep happening???
Hi, i'm a new user of SG SII, and i don't know much about it. I was trying to install new ROM on it, first I tried to unroot my phone with CF ROOT, after that everthing was OK. Then i tried to install REVOLT JB i9100 ver 2.8.2, when i got by CWM in recovery, instead of clicking wipe data, then cache and ccache partition i did: wipe data/factory reset, and wipe cache partition, wipe dalwik cache and format system. I flashed kernel and during ROM installation phone turned off and did turn on. i think it's hard bricked. I don't know what to do, please help.
Are you still able to get into don't download mode o your phone ? ( volume down, home key, power button )
If so, reflash your kernel and go from there.
Also have a look at CyanogenMod, they have a good post with instructions on here.
Sent from my GT-I9100 using xda premium
x
Dorbian said:
Are you still able to get into don't download mode o your phone ? ( volume down, home key, power button )
If so, reflash your kernel and go from there.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
no, phone doesn.t response on anything, even if i'm charging the battery.
Try removing your battery and unplug cables.
Then try download or recovery mode again.
If it really doesnt work then there is probably something fried on your system board, doubt anything you can do about it as i had the same not that long ago out of the blue.
Sent from my GT-I9100 using xda premium
.
Dorbian said:
Try removing your battery and unplug cables.
Then try download or recovery mode again.
If it really doesnt work then there is probably something fried on your system board, doubt anything you can do about it as i had the same not that long ago out of the blue.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Did it and still nothing, do you think that maybe JIG plug could be a good idea?
You could always give it a go, havent had any experience with i myself tho so hopefully someone else here can give you a hand
Sent from my GT-I9100 using xda premium
I had a similar issue with sgs1 back in the day. I built a jig and got it working so give it a shot if you can. Its worth it for the cost of a jig surely?
Sent from my GT-I9100 using xda app-developers app
.
ok, i'll try to do it. but i have to ask if that will not work, can i save my phone by changing main board on warranty in service?
You can always tell them that you were updating via kies and it dropped dead just like that.
Your battery was low when you tried to flash it, wasn't it?
try a jig first tho; there's something fishy about those wipes you mentioned.
pawlo130 said:
Hi, i'm a new user of SG SII, and i don't know much about it. I was trying to install new ROM on it, first I tried to unroot my phone with CF ROOT, after that everthing was OK. Then i tried to install REVOLT JB i9100 ver 2.8.2, when i got by CWM in recovery, instead of clicking wipe data, then cache and ccache partition i did: wipe data/factory reset, and wipe cache partition, wipe dalwik cache and format system. I flashed kernel and during ROM installation phone turned off and did turn on. i think it's hard bricked. I don't know what to do, please help.
Click to expand...
Click to collapse
On some occasions flashing a device can use 40-50% of battery to prep and flash device which is why its advised to never flash your phone unless you have at least 50-60% battery.
If power cuts out during flashing procedure it can damage nand/ic chip, corrupt bootloader, corrupt sdcards etc.
After leaving it plugged into to charger overnight try a USB jig to see if you can get it to wake up in download mode, If you can re-flash rom and go from there.
gastonw said:
You can always tell them that you were updating via kies and it dropped dead just like that.
Your battery was low when you tried to flash it, wasn't it?
try a jig first tho; there's something fishy about those wipes you mentioned.
Click to expand...
Click to collapse
battery was about 70%, so it should not have turned off
pawlo130 said:
battery was about 70%, so it should not have turned off
Click to expand...
Click to collapse
then I was right with the fishy wipes.
pray for the jig.
From what you described, it couldn't have hard bricked your phone. In fact, it isn't easy to hard brick our phone unless you install that infamous ICS 4.0.4 leaked ROM or mess with flashing of PIT file. Try to use another fully charged battery to boot up or go into CWM recovery.
Sent from my GT-I9100 using Tapatalk 2
xdanoober said:
From what you described, it couldn't have hard bricked your phone. In fact, it isn't easy to hard brick our phone unless you install that infamous ICS 4.0.4 leaked ROM or mess with flashing of PIT file. Try to use another fully charged battery to boot up or go into CWM recovery.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
while i was installing new rom, process was like 0% for about 5 minutes, and then phone just turned off. When i did flashing and installing CWM everything was ok. I rooted it with CF root.
Exact same problem here. Followed the root guide to the letter and all OK. Set omega rom installing and it stayed at 0 for five mins then it shut off. Now no life at all.
Gonna build a jig tomorrow so I'll update here if it works.
Really hope so as it's a mates phone.
I've done my s3, s1 and the Mrs s2 without it going wrong so I'm not sure how it went wrong this time.
Sent from my GT-I9300 using xda premium
SkinBobUk said:
Exact same problem here. Followed the root guide to the letter and all OK. Set omega rom installing and it stayed at 0 for five mins then it shut off. Now no life at all.
Gonna build a jig tomorrow so I'll update here if it works.
Really hope so as it's a mates phone.
I've done my s3, s1 and the Mrs s2 without it going wrong so I'm not sure how it went wrong this time.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Your phone have got super brick, and the JIG nothing to do.... You must go to service.
The reason for this is stock kernel who has kode cause brick.
Sorry for my english!
Ah that's a shame. Fingers crossed it's still under warranty or it's gonna be an expensive month.
Sent from my GT-I9300 using xda premium
SkinBobUk said:
Ah that's a shame. Fingers crossed it's still under warranty or it's gonna be an expensive month.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Don't worry will be fine. JTAG must be repair all
Wysyłane z mojego GT-S6500D za pomocą Tapatalk 2
Hello,
I have flashed a few custom ROMs onto my x10i and each time it reaches the lock screen when it starts up it just seems to go into a reboot loop from kernel splash screen to lock screen again. Is there any fix for this ? I have tried using SEUS and restarting the whole process of flashing a kernel, rooting etc but it doesn't seem to work. it literately only happens when it reaches the lock screen. sometimes it lasts longer than that. Whenever I wipe the system it seems to work fine but as soon as a few things are running it starts to reboot again. The current ROM I'm running is PAC-man, with the kernel supplied along with it.
Could anyone help me ?
Thanks,
mmy4life
I have the same problem
use the phone until the battery become empty charge it in off mode up to 100 enter in xrecovery advanced options wipe battery stats and reboot
maybe you did an error when flashing or it runs wrong kernel. my suggestion : just use another ROM there are many nice ROM you can choose, and dont forget to follow step by step installation guide provide by developers.
Is the rom overclocked as this can can happen on some devices try and set the CPU to 998
Sent from my Google Nexus S
mmy4life said:
Hello,
I have flashed a few custom ROMs onto my x10i and each time it reaches the lock screen when it starts up it just seems to go into a reboot loop from kernel splash screen to lock screen again. Is there any fix for this ? I have tried using SEUS and restarting the whole process of flashing a kernel, rooting etc but it doesn't seem to work. it literately only happens when it reaches the lock screen. sometimes it lasts longer than that. Whenever I wipe the system it seems to work fine but as soon as a few things are running it starts to reboot again. The current ROM I'm running is PAC-man, with the kernel supplied along with it.
Could anyone help me ?
Thanks,
mmy4life
Click to expand...
Click to collapse
That usually happens when the ROM is using overclocked CPU settings or an unstable CPU governor as default but it can also be defaulted inside the kernel. You simply flash another kernel and appropriate ROM.
CCVader13 said:
That usually happens when the ROM is using overclocked CPU settings or an unstable CPU governor as default but it can also be defaulted inside the kernel. You simply flash another kernel and appropriate ROM.
Click to expand...
Click to collapse
I've tried this multiple times, it happens on the stock ROM and kernel.
mmy4life said:
I've tried this multiple times, it happens on the stock ROM and kernel.
Click to expand...
Click to collapse
Install xrecovery and wipe the dalvik cache.
Sent from my Xperia X10 using xda app-developers app
CCVader13 said:
Install xrecovery and wipe the dalvik cache.
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
I've also tried that. I went through all the proper procedures when installing a new rom.
mmy4life said:
I've also tried that. I went through all the proper procedures when installing a new rom.
Click to expand...
Click to collapse
Then it has to be a hardware problem. Try removing your SD card before booting it up.
Sent from my Xperia X10 using xda app-developers app
I've had the same problem
1eyedmonster said:
Is the rom overclocked as this can can happen on some devices try and set the CPU to 998
Sent from my Google Nexus S
Click to expand...
Click to collapse
I flashed 2.3 and it kept rebooting after a while, so i re flashed 2.1 and it is more stable but reboots if i open a app or anything that uses ram.
btw 1eyedmonster how do you set the CPU to 998?
I am also having ths reboot and crash issue... is there no fix for it? I have read about this reboot error at numerous sites. Must be a bug or summin man... or we dn summin wrong... and if it were hardwars related then to what hardware wd you be referring to? Is it a replaceable part? How easy wd such a task honestly be... i have 2.3.3 with 3.0.0.75 and no matter what it just wont stop dropping itself while i just start to appreciate it all over again... so im sure there have bn plenty issues regards this... so is there an answer?
Sent from S3Terry, Galaxy SIII GTI9300, using 8ta/Telkom Mobile.
reboot issue
mmy4life said:
I've also tried that. I went through all the proper procedures when installing a new rom.
Click to expand...
Click to collapse
hi,
i have the issue, did you fixe your phone ?
thank
A few days ago my charger (not an official Samsung charger as I bought my phone from a random shop) stopped working as it only works when you hold the connector in a certain position. Ever since then my phone won't charge unless you take the battery out for a few seconds, put it back in and connect it to the charger (I now use my camcorder's charger and my PC via usb). Also, the charger stopped working whilst it was in the phone (I was using it at the time).
Does anyone know if there is a solution to this problem?
Thanks in advance!
ExperimentalHDX said:
A few days ago my charger (not an official Samsung charger as I bought my phone from a random shop) stopped working as it only works when you hold the connector in a certain position. Ever since then my phone won't charge unless you take the battery out for a few seconds, put it back in and connect it to the charger (I now use my camcorder's charger and my PC via usb).
Does anyone know if there is a solution to this problem?
Thanks in advance!
Click to expand...
Click to collapse
Try a factory reset first, different lead/battery or repair after that.
boomboomer said:
Try a factory reset first, different lead/battery or repair after that.
Click to expand...
Click to collapse
Thanks for the reply :good:
I'm running Cyanogenmod 10.2, would it be safe to back up my apps and system data with Titanium Backup then restore the backup after the factory reset?
You didn't mention you were on a custom Rom, do a nandroid then flash a stock rom to test.
Don't change anything until the charging has been tested.
boomboomer said:
You didn't mention you were on a custom Rom, do a nandroid then flash a stock rom to test.
Don't change anything until the charging has been tested.
Click to expand...
Click to collapse
Done. It seems to be charging, slowly, but steadily. Now what?
ExperimentalHDX said:
Done. It seems to be charging, slowly, but steadily. Now what?
Click to expand...
Click to collapse
0- 100% standard time about 3 to 4 hours .
100charge use the phone and let the battery recalibrate itself .
JJEgan said:
0- 100% standard time about 3 to 4 hours .
100charge use the phone and let the battery recalibrate itself .
Click to expand...
Click to collapse
Alright, thank you. Was this fix sacrificing everything that I had before which is currently in a nandroid backup?
You've proven the fault is with your rom/setup, restore the nandroid and the charging problem will return.
If you really want CM then flash a clean install of that rom and test charging, if it works then restore apps only from titanium.
boomboomer said:
You've proven the fault is with your rom/setup, restore the nandroid and the charging problem will return.
If you really want CM then flash a clean install of that rom and test charging, if it works then restore apps only from titanium.
Click to expand...
Click to collapse
The awkward moment when I forgot to backup my apps... Would going back to the problematic nandroid, backing up my apps, reflashing a stock rom then rooting/installing cwm/cyanogenmod be safe?
Edit: As opposed to reflashing a stock rom, installing cwm now and backing up this setup would save time
My phone got back into the habit of doing this, the fix seemed to be only temporary... I really don't want to go stock, I enjoy Cyanogenmod.
Sent from my GT-I9300 using xda app-developers app