[Q] MW600 and 6.1.A.2.45 Update - Sony Xperia P, U, Sola, Go

I was using my MW600 with great success from the first moment i acquired my SXS (2.3.7) (calls and music). After the update to 6.1.A.2.45 the MW600 can not start or stop the Walkman Player when the phone is locked and sometimes i have noticed that it can not answer the incoming calls. Any workaround?
Also i noticed that every time i use the MW600 the volume is set to the handset referring to the Bluetooth is set to a specific point (somewhere in the middle) even if ia am always setting it to the full on both handset and MW600

Related

Handsfree problem

Sorry if this has been brought up before....i tried searching but couldn't find anything.
I seem to be having a problem and don't know how to solve it:
When someone calls, it only rings on the phone and not in the headphones as well.
So if I am listening to music and I get a call, the phone rings and the music pauses but there is no ringtone in the headphones??
I am using the stock megabass (wired) headphones that came in the box with the x10. I have no problems answering the call and speaking using the hands-free.
I am on the generic UK R2BA020 firmware.
Any assistance would be great.
I don't know about the wired phone, but it definitely works for my mw600 that came with the phone..
I just tried calling myself using another phone while listening to music on mediascape through bluetooth..
so when the phone(regular) starts ringing, the phone beeps(maybe through bluetooth, i forget) and then the music stops, and then i hear the ringtone through the bluetooh a second after the music pauses...
and then when i stop the call, the music plays again

anyone with bluetooth media problems on 2.2+ roms

ok, this has been plaguing me and preventing me from switching permanently to 2.2 since the camera has been fixed.
the problem:
you pair your bluetooth device and connect. media works fine. then disconnect and turn off bluetooth and the bt device. turn everything back on, and media won't play through the bluetooth device.
the cause:
well, i have been using the same jabra sp700 for a few years now. worked great on all my devices (iphone 2g, iphone 3g, dream, various nokias and my x10 up to 2.1). well, apparently 2.2+ android requires a bluetooth device that supports avrcp or the avrcp handling of 2.2+ roms require avrcp to work on the bluetooth device. however, my sp700 (and i would imagine other older bt devices) either do not have this or it doesn't work as android wants it to.
the solution (tested multiple times, works sometimes, not others):
pair and connect, go into settings and disable "phone audio" for the bluetooth device.
kind of sucks since this is my car speaker phone, but i use it for media more than i use it for phone. but i have connected/disconnected several times and media is still playing through the bt and not the phone speaker.
so those who have bt media problems with 2.2+ roms, try this, it may work for you.
will this fix the problem? http://www.foogod.com/android/ ?
it is the same with MW600 headset on Wolfbreak's CM 6.1.3 0.54 ROM.
what happens for me:
both devices were paired in the past and remember each other. I turn on BT on the phone and power on the headset. press play in the music player - nothing plays, it hangs and come back to paused state.
when I press play for second time music comes from headphone speaker.
what helps:
stop the playback at this point. turn the headset off and on again. press play and the music should play through it. with both music headset and phone audio profiles active.
this is how I have to do it every single time. headset works normaly afterwards until you turn the BT off on the phone again. it's just a little inconvenience.
what troubles me more are the short gaps in the playback you get about every minute and when you turn the screen off.
krobar77 said:
will this fix the problem? http://www.foogod.com/android/ ?
Click to expand...
Click to collapse
i'll try it today.
krobar77 said:
will this fix the problem? http://www.foogod.com/android/ ?
Click to expand...
Click to collapse
does not work
what about the method I wrote about? I think it is the same problem.
power off/on your headset again when the music starts playing from the headphone speaker used normally for calls. every single time this happens it fixes this for me.
dante-fu said:
what about the method I wrote about? I think it is the same problem.
power off/on your headset again when the music starts playing from the headphone speaker used normally for calls. every single time this happens it fixes this for me.
Click to expand...
Click to collapse
that was working on and off for me. sometimes it does, sometimes it doesn't.
i made some modifications to the bluetooth audio.conf, will test those on my way home tonight.
no problems here with my bluetooth and i'm using wolfbreaks' 2.2 rom. i'm using a sony dr-bt50 headphones.
I've been having this problem with my headset too (hbh is800) and I'll try once I get back from home. Hopefully it works. I've tried the foogod link before and it never helped. I've been experiencing the bluetooth problem with my watch too (mbw 150) it connects and later it disconnects. and the cycle keeps repeating.
I have the same problem with dante-fu. I use Wolfbreak's CM 6.1.3 v0.54 ROM and MW600 headset. But turn on/off headset doesn`t help me sometimes and I have to re-pair devices.
I'm too having some problems with my mw600 head set.
Sometimes it does not play through the Bluetooth headset but through the speaker of the phone (it happens rarely)
But the most annoying thing is after a call, my headset just freezes & nothing works expect for the power button. Only solution is to turn the device of & turning on it again.
Using Wolf's 2.2 CM ROM
well, this sucks, i've tried changing all the media configs and nothing.
only solution i can think of is porting the bluetooth stack from 2.1 to 2.2.
back to 2.1 since my bt speaker is the only option for music in my car since my kid decided to deposit $.42 into my cd player.
Blutooth Media streaming problem
Hello,
Has anyone had any luck resolving this issue?
It's starting to drive me crazy. Bluetooth phone calls work perfectly but media streaming works intermittently.
Is there an easy way to replace downgrade the blutooth stack?
I am running CM 6.13

[Q] No sound earphone/earplugs/speakerphone

I have a problem with the sound on my Xperia S. It seems that I don't have sound through the ear speaker during calls. When I plug my genuine Sony Xperia S headset I do have sound. When I turn the speakerphone on during calls I do have sound. But when I use my mediaplayer w/o the headset I don't have sound over the speakerphone. Ringtones do not sound when receiving a call or text/IM-messages.
Some issues that might relate to this problem:
- I used my beats by dre Tour headphones, and since I installed KA09 Rom it doesn't give the system notification that the microphone and volume buttons don't work.
- I installed KA09 and today KA10, the problem still continues to exsist.
I never dropped the phone or had any damage, I only have it for 3 months now.
Anybody else facing problems like mine? If so, what was your solution?

[Q] Samsung 10.1 Tab with ICS 4.0.4: No voice with BT Headset calls, only for media

Hi,
Some strange things:
Samsung 10.1 Tab with Upgrade on ICS 4.0.4 (Stock-Version) - no problems with Upgrade (Tnx to XDA-Dev for that).
Headset: Sony-Ericsson MW600
With 3.2, I used the Headset only for media (there was no phone ). With my other phone (Galacy S) worked both, phone and media.
Back to the Tab. Media works great, but phone not really. When I use the dialing-buttons, I can her the dtmf-tone in the headset. When I connect, there is no dialtone / waiting tone. And I cant hear the partner nor he can hear me. The Microphone is working, I can hear myself. And what also work is the phone-button on the headset. I can finish the call.
What's that? Why is only the sound from the "gsm-channel" not working? Any ideas? Issue for the tab? ICS? Bluetooth? Headset?
What BT Headset do you use with tablets and phone callings?
Regards
LeNique

[Q] Galaxy S3 Bluetooth porblems after JB update

I just recently received the JB update here in my country and i noticed that if the phone is on mute/vibrate, if i connect a bluetooth device like mw600 and press any button on the MW600, the phone unmutes itself. even if i mute the phone again, it will just unmute itself if i try to use any controls on the MW600. my music player is poweramp pro.
how can i fix this so that the phone stays on mute/vibrate while controlling the device with the bt device? is it with the poweramp player or with the update itself? thanks!

Categories

Resources