Hi..
I've troubles with mi vibrant now it has the 2.2 android froyo, i was searching in many websites to find how to uptdate to gingerbread or ICS,
in some site i founded that my trouble is the kernel, 'cause my phone has de 2.6.32.9
can anyone help me and tell me how i can uptade to gingerbread or ICS...
There are lots of tutorial, but you can check this video: http://www.youtube.com/watch?v=wMQQDpqVNBk
jornrk said:
Hi..
I've troubles with mi vibrant now it has the 2.2 android froyo, i was searching in many websites to find how to uptdate to gingerbread or ICS,
in some site i founded that my trouble is the kernel, 'cause my phone has de 2.6.32.9
can anyone help me and tell me how i can uptade to gingerbread or ICS...
Click to expand...
Click to collapse
Okay, at this point you need to make a choice, both have the same path, but you need to know that all is and jb Roms are vulnerable to the EU bug which as of now is irreversible and removes the use of your internal sdcard. As far as being able to flash a Rom, you can odin, overstock then boot into recovery, and flash according to Roms specific directions, general rule of thumb is if you are going to flash an ics or jb Rom use cm 7.1 as an intermediary between the overtook install and your ics/jb Rom.
You can check this too.
Go to Vibrant Android Development.
1st thread, Essential hard to find files, by Woodrube.
Scroll to miscellanous Guides and threads.
Select Installing ICS Roms.
Read, Read, Read,Read.....Hope your familiar with CMW, its essential.
Please read this, its the guide mentioned ^^^
http://forum.xda-developers.com/showthread.php?p=31279153
And here's another you must read http://forum.xda-developers.com/showthread.php?p=27218862
You must also read this
http://forum.xda-developers.com/showthread.php?p=9375927
starting to see the theme here?
sent from the depths of helly bean
These men speak words of wisdom. Make sure you understand what you are doing before flashing. Not a good practice to read and follow steps while doing it. I generally read first, twice and then flash.
Thanks for take your time, i've try the CWM and recovery mode form to flash my ROM but when i want to enter in the recovery mode
throw me this messages...
My CWM version is 5.0
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted
anyone knows the best way to fix it...
:fingers-crossed:
What recovery did you flash
Sent from my SGH-T959 using Tapatalk 2
jornrk said:
My CWM version is 5.0
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted
Click to expand...
Click to collapse
You flashed a ics or jb kernel. Try a 2.2 froyo kernel from moped ryders threads or fisherman.
recently i bought it so i dont know what kind o flash it has.
My recovery version is e3
can someone give me a tutorial, that how i can flash de kernel and all the stuff that i need?
my vibrant has de froyo 2.2 system...
Just search through the development threads, find a 2.2 kernel. It will be a zip file. Go to CWM recovery and Install zip from SD.
It'll flash the kernel and you'll be up and running in no time
As mentioned, you'll find good kernels to use if you look through some of moped's or fishmans ROMs.
The links I posted walk you step by step how to flash etc. If you are looking to go to a GB, ICS or JB ROM, use the Odin files in the link and go back to stock 2.1 eclair. Then use the update.zip in the links I posted to get cwm recovery. Everything that you are asking can be answered in the threads I posted links to. I would suggest either going to GB or JB. Flashing an ICS ROM puts you at risk of the EU bug.
sent from the depths of helly bean
Related
Hi I want to install latest CM9 nightly, As Im installing first time, I just want to make sure that my phone is running firmware lower than XXLPH though it looks lower but cant judge, I went through official CM9 Thread I can follow all the steps except this one. And also I have already rooted my device using
GT-I9100_THR_I9100JPKJ2_I9100OJPKJ1_I9100XXKI4 (firmware) and
CF-Root-SGS2_XW_XEF_KJ2-v4.4-CWM4.tar (root kernel)
I still havent installed any custom rom yet.
Here is my current phone details:
GT-19100
Android 2.3.5 (STOCK)
Baseband 19100XXKI4
Kernel 2.6.35.7-I9100XWKJ2-CL676699root
____________________________________________
I thought my firmware is higher than XXLPH so I found this guide to ugrade to ice cream firmware first:
http://androidbeast.com/937/tutoria...oid-ice-cream-firmware-on-galaxy-s2-gt-i9100/
then root it with this kernel :
http://androidbeast.com/948/root-samsung-galaxy-s2-cf-root-kernel-odin/
Now I need your advice that weather should I continue following above guide or should I start flashing CM9 firmware staright away ??
now that you are rooted and on ics, you can then follow the instructions in CM9 thread.
Flash odin version first and then update to latest build from cwm recovery
codeworkx said:
If you're a bloody noob and getting confused by following simple instructions, go down and read about using the noob-proof ODIN method.
First time installing CyanogenMod 9 to your Galaxy S II, or coming from another ROM:
- READ FAQs: http://teamhacksung.org/wiki/index.php/Experimental:GT-I9100:Frequently_Asked_Questions
- Make sure you're running ICS bootloaders lower than LPH: Download (flash as PDA with odin or extract and $ sudo heimdall flash --primary-boot boot.bin --secondary-boot Sbl.bin)
- make sure you're running a proper working CWM like the one from CM7
- Copy GApps and CM9 ZIPs to your internal SDCard
- Boot into Recovery
- Flash CM9 zip
- Flash GApps zip
- DO A DATA WIPE / FACTORY RESET (otherwise your calendar sync will not work)
- Reboot
- Don't restore Apps using Titanium Backup!
Upgrading from earlier version of CyanogenMod 9:
- Copy CM9 ZIP to your internal SDCard
- Boot into Recovery
- Flash CM9 zip
- Wipe cache partition and dalvik-cache
- Reboot
Using the noob-proof ODIN method:
- Download CM9 Resurrection Edition
- Download GApps and put it onto your internal sdcard
- Open Odin
- Choose cm-9-XXXXXXXX-ODIN-galaxys2.tar.md5 as PDA
- Boot your phone into download mode
- Connect your device via usb to your computer
- Wait till Odin has fully recognized your phone
- Hit the start button and wait till the flash process is finished
- Device boots automatically into recovery
- Flash GApps, wipe cache and dalvik-cache
- Reboot into CM9
- Follow above steps to update CM9 to lastest available version (Upgrading from earlier version of CyanogenMod 9)
Click to expand...
Click to collapse
sahibunlimited said:
Flash odin version first and then update to latest build from cwm recovery
Click to expand...
Click to collapse
You mean i should install ics rom first with odin then i should go for CM9?
Sent from my GT-I9100 using XDA
loverdude said:
You mean i should install ics rom first with odin then i should go for CM9?
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Dude. He even posted the instructions from the CM9 thread. If you can't follow them, you should probably stick to stock. No offense.
sahibunlimited said:
Flash odin version first and then update to latest build from cwm recovery
Click to expand...
Click to collapse
Oh i get it! First i should use noob proof method then i should use "Upgrading from earlier version of cm 9" regardless of what firmware i currently have am i right?
Sent from my GT-I9100 using XDA
ctomgee said:
Dude. He even posted the instructions from the CM9 thread. If you can't follow them, you should probably stick to stock. No offense.
Click to expand...
Click to collapse
Am i right on what i said in my above comment? I was getting confused because i read that CM 9 requires ics firmware already installed first.
Sent from my GT-I9100 using XDA
loverdude said:
Am i right on what i said in my above comment? I was getting confused because i read that CM 9 requires ics firmware already installed first.
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Yes, follow the "noob proof" method. (which doesn't seem too noob proof at the moment... :/)
And seriously, why did you start two threads (this current one, and this other one) about flashing an ICS ROM? CM9 is considered an ICS ROM, so really the topic is the same.
Hi.... i recommend this site galaxys2root.com
it helped me figure out a lot of stuff in the beginning. Video walkthrough of installing roms is really a big help.
For the latest Ressurection Remix 1.2 looki the Android developer forum.
I am about to install now
Hope you get it all sorted
BobPowers said:
Hi.... i recommend this site galaxys2root.com
it helped me figure out a lot of stuff in the beginning. Video walkthrough of installing roms is really a big help.
For the latest Ressurection Remix 1.2 looki the Android developer forum.
I am about to install now
Hope you get it all sorted
Click to expand...
Click to collapse
Hey i succeeded!!!! Im soooo happy! first I followed your website which u gave me to install Resurrection Rom then I upgraded to cm9 through zip file CWM recovery. thanks a bunch man
ctomgee said:
Yes, follow the "noob proof" method. (which doesn't seem too noob proof at the moment... :/)
And seriously, why did you start two threads (this current one, and this other one) about flashing an ICS ROM? CM9 is considered an ICS ROM, so really the topic is the same.
Click to expand...
Click to collapse
Actually on that post I wasn't sure which ROM was based on what firmware but i came to know from users like you and I got clear idea from you all before that in the mean time, i was gathering info through various guides, videos from weeks and merged those ideas in to one then I decided to install CM9 as it looks similar to new galaxy nexus phone and this is exactly what I wanted my phone to look and behave like. Now I am happy and satisfied.
I have done oden with bootloader but in the middle of that the bootloader progress in oden is turn to red and cell get off. now its hard bricked, dead, what i can do
kami2k said:
I have done oden with bootloader but in the middle of that the bootloader progress in oden is turn to red and cell get off. now its hard bricked, dead, what i can do
Click to expand...
Click to collapse
Man... why did you the touch the bootloader first? never play with it unless you know whats gonna happen! and about noob installation guide for CM9 is not clearly noobproof, I completely did all installation with clockworkmod recovery, I used ODIN only once for rooting my phone after that i never used it as I was very very cautious and careful about each and everything bit i was doing.
But never loose hope, you never know what kind of brick you have you have two ways to unbrick your phone,
1.Using USB jig, search it on XDA, Google, Youtube
2.JTAG Service, This is the ultimate solution if your phone is completely Hard bricked but for this you have to send your device to them.
here is their demonstration:
http://www.youtube.com/watch?v=kQdTi2vgMmY
its written in the cm9 installation to do the boot-loader with ODIN, that is what i do
oh bhai....... make sure you had i9100 not the i9100G,
remove battery and see if you can get download mode.
im running cm9 on new bootloader unless intratech still removes them from his stock ROm as he used too..... i came from stock LPS to cm9
that much sense i have dear its s2, and ya its dead, i send the cell to lahore, khi, rwp, but no one have jtag proper equipment
kami2k said:
that much sense i have dear its s2, and ya its dead, i send the cell to lahore, khi, rwp, but no one have jtag proper equipment
Click to expand...
Click to collapse
you dont get it i9100G is also S2 and virtually same. you have to see under the batter if its written i9100 or i9100G.
because thats what would happened if you flash i9100 bootloader onto i9100G.
plus faulty usb, dead battery can do the trick aswell.
Hello all. I am trying to get jellybean on someones vibrant. Its on froyo and its already rooted. What would be the best way to do this? Do I need a different bootloader? or can I just get clockwork and flash? What is the best way to get clockwork? any help would be very much appreciated. thank you.
I guess from what I've been reading, GB bootloaders are optional. If you decide to go ahead and flash it then follow the guide and you'll be fine. It takes around 10 seconds to flash.
Look in this section for the update.zip file. It will put Clockwork Mod Recovery on your Vibrant. It should be located in Woodrubes Repository, (look for it in the stickies).
Find a JB ROM you want to try. I have used Helly Bean and Paranoid Android. I like them both. PA has a lot more options if you're into that kind of thing.
Each ROM has its own set of instructions, so read them. Don't take this the wrong way, but the fact that you created this thread tells me you haven't done your research. So, before you go and brick your device, do some reading up. There are really great guides and other reading material in the stickies and all over really.
As always, if you need help... hit us up. We're always around.
You were just sliced bread before you were burnt by the toaster.
One more thing, go back to stock 2.1 using Odin, then root, get cwm recovery, then flash a new ROM.
No tickee, no laundry!
cm7
When the jb Roms first started to release most of them suggested to flash cm7 first to setup the system for install of jb Rom
Hi, I successfully flashed my T-mobile Vibrant about twelve months ago to a custom 2.2 Froyo rom (Trigger 3.2 Final). It's a great rom and EVERYTHING works. However lately I've read rave things said about newer roms such as ICS passion. It's been a while and I'm still a noobie at this so my question is:
What is the easiest way to get to ICS passion from my current custom Froyo rom ? Thanks ~ Chris
hi,
Its very easy to get ICS running on your vibe. There may be various ways to proceed. I ll give you what I did (AFTER failing for 5-6 times )
Odin back to stock (It may be not necessary. But I started from the beginning which is better AFAIK )
Then stored ICS ROM (ICZen which in my case) and update.zip (CWM) on internal SD
then flashed GB Bootloaders (It also may/ may not necessary. But I did it b/c I already had many failed attempts)
Then flashed CM7 first
After that flashed ICS on top of it
Worked at last for me
NOTE: Please read relevant instructions provided by ROMs b/c flashing one may differ from flashing another.
You can find more information if you run into problems in my thread [SOLVED]Cannot install ICS ROM--please HELP
link: http://forum.xda-developers.com/showthread.php?t=1752937
tc
Happy Flashing
You may just want to read this before flashing ICS. http://forum.xda-developers.com/showthread.php?t=1580902
Sent from my SGH-T959 using Tapatalk 2
^^^ Truth
And I would suggest staying away from Passion. It is based on 4.0.3 and there was a pretty significant code upgread when ICS went to 4.0.4.
IIRC, Passion is the last ROM that still uses 4.0.3 and is probably why it is dead now (but for some reason lives in infamy on YouTube and Google Search).
Haarsh's way works just fine but here is another method as another option too.
Thanks
Thanks for the replies. This is why I subscribed to the forum.
mmm... I see a few pitfalls ahead.
Background info from me is that I can't use Odin on my Linux computer. Never really got into Heimdall. I flashed my first rom by downloading the rom zip file and put it on my phone's internal sd card then let clockwork do the rest, ie nandroid backup and flash the rom from the update zip. I'd like to do the same again.
Ok, it's my understanding that anything above 2.2 needs the GB bootloader so the first step is to install that over my Trigger rom. I think Trigger would still run with the GB bootloader at that stage. Next download an update zip of a rom of my choice, put it on my phone's sd, then flash it with Clockwork.
Seems to me that should work or am I missing something I wonder ?
You can flash the GB bootloader. Its backward compatible so it will work with any ROM currently available.
Download the .zip of the ROM you want, and any Gapps if applicable. Then just follow the instructions on page 1 of the ROM (OP).
The usual would be Wipe Data/Factory Reset, Clear Cache, Clear Dalvik. Flash ROM, flash Gapps, restart. The instructions will tell you all you need to know.
If something goes wrong, give us a shout. That's what we're here for.
help me plz
hi mate i know this is quite outdated maybe but im searching for Samsung T959 stock rom Froyo 2.2 that i search everywhere but didnt find. Can you help me for any link ?
or please suggest me someone.
Thanks in advance.
castan said:
Hi, I successfully flashed my T-mobile Vibrant about twelve months ago to a custom 2.2 Froyo rom (Trigger 3.2 Final). It's a great rom and EVERYTHING works. However lately I've read rave things said about newer roms such as ICS passion. It's been a while and I'm still a noobie at this so my question is:
What is the easiest way to get to ICS passion from my current custom Froyo rom ? Thanks ~ Chris
Click to expand...
Click to collapse
Ok...Yep im a newbie and yep ive looked in the forums but im getting confused..
Phone :Samsung Galaxy s2 i9100 running 4,0.4 kernal version XWLPT.
Ive rooted the phone using the method 1 on this guide.. http://forum.xda-developers.com/showthread.php?t=1746794
Now im looking to install cyanogenmod but i dont want a bricked phone so was wondering if anyone cleverer then me can give me a quick guide of how to install as all of the guides are getting confusing lol
Cheers for you help in advance...
Now that you have rooted your phone, you can install CWM. CWM (short for ClockworkMod) is a custom recovery menu which allows you to install any custom ROM packaged as a zip file. Refer to part 2 in the tutorial you followed to install CWM. I'd also flash another kernel such as Siyah (thanks to gokhanmoral) to make sure you can't brick your phone. That stock kernel you have is dangerous and you must get rid of it before doing the data wipe required to install CM.
Once you've done that, grab a CyanogenMod build and install it from the CWM recovery. You should of course place the zip file on your internal storage first. Make sure to follow the instructions here.
By the way, there's a "Q&A" section for this device, so please try to ask your questions there, they should get answered faster and by more people if you do that.
Cheers tydem..i thought the kernel in mine was prone to bricking...ill flash the one that you recommeded and see how it goes
just to add to that.. do we have to update Modems as well? can we update them?
No.
Yes.
xD3S1x said:
just to add to that.. do we have to update Modems as well? can we update them?
Click to expand...
Click to collapse
guys im new here on galaxy s2 thread so kindly do not judge me if i ask noob things
i want to flash AOKP for galaxy s2 and i found 2 of them Revolt and thunder roms
download both + dorimanx kernel placed on SD going into CWM trying to flash kernel and rom but im getting this message :
E:signature verification failed !!
Like just about everything else on here, 'E:signature verification failed !!' has been covered many many times on here (Including a couple of times over the past few weeks). Search for those threads, your answer will be in one of them.
i think i have the stock recovery !!
flashing this Cf-root throw odin will give me the CWM ??
Having stock recovery would explain your problem. If you flash the correct CFRoot kernel via Odin, yes, you will have a rooted phone + CWM. However, many people prefer to simply flash the Odin version of a custom kernel (like Siyah) to achieve this aim these days (Given the issues with 4.0.4 stock kernels, which CFRoot is, and the brickbug). Find the relevant Odin flashable version of Siyah for the Android version you're running; check the Siyah threads for which build is compatible with which version of Android (should be on the first page).
all the Cf-root is ICS and im running JB what i can do in that case ??
all i want to access cwm to flash rom and kernel
This recovery I have
Sent from my LT26i using Tapatalk 2
Which as you said is stock recovery. You can flash temporary versions of CWM from stock recovery, but these only persists until the next reboot/aren't permanent. Make life easy for yourself & flash the Odin version of a rooted kernel as advised in my PP (Use CFRoot if you really want to, just don't do a wipe from CWM while you're running it, wait till you're running a custom kernel before doing any wipes).
Edit - You're welcome, BTW.
MistahBungle said:
Which as you said is stock recovery. You can flash temporary versions of CWM from stock recovery, but these only persists until the next reboot/aren't permanent. Make life easy for yourself & flash the Odin version of a rooted kernel as advised in my PP (Use CFRoot if you really want to, just don't do a wipe from CWM while you're running it, wait till you're running a custom kernel before doing any wipes).
Edit - You're welcome, BTW.
Click to expand...
Click to collapse
ye but the problem cf-root only for ICS and im on JB so if i flash it and then flash JB kernel will do the job or i will stuck !?
sorry if i sound noob but frist time im dealing with Samsung its completly diffrent from Sony
thanks for your help
OK. This is my final post to this thread. I tire very quickly of having to repeat myself.
For the last time...Go to the Siyah threads. Work out which Siyah build you need for the Android version you're running. Get the Odin flashable version of that kernel. Reboot into download mode & flash it with Odin.
Done.
Rooted phone + CWM.
dude sorry but i'v found this
flashing this Siyah-s2-v6.0b4
and now i have cwm and flashed thunder rom
thanks for help and sorry for beeing noob here
Make a nand and efs backup now for future reference.
theunderling said:
Make a nand and efs backup now for future reference.
Click to expand...
Click to collapse
yep this part i know from my Xperia S