Related
So I tried to use odin to root my device. I was following a guide on youtube but XDA won't let me post it. I got to where I run odin while my phone is in download mode. Everything goes according to the video, however, when the phone reboots it freezes at the Samsung splash screen with the yellow ! at the bottom. I've tried putting the phone back in download mode and running it through Odin again but the problem is not fixed. Does anyone know how I would go about fixing this?
Try restocking. If you repartitioned you may be in trouble. Go to cm7 website and follow their instructions.
Sent from my GT-P1000 using XDA App
I made sure the repartition option wasn't selected before I ran odin in both cases. I'm assuming by CM7 you mean cyanogenmod? Sorry for the ignorance, I just want to make sure I'm doing what I need to to get it back in working condition
Dont know why should you go to cm7 website.
Follow this: http://forum.xda-developers.com/showthread.php?t=1103399
use an appropriate kernel for your phone.
Or get a stock kernel and use odin to flash: http://forum.xda-developers.com/showthread.php?t=1075278
Still not working? Use this: http://forum.xda-developers.com/showthread.php?t=1108499
For Galaxy S 2 GT I9100
Totalrapture said:
I made sure the repartition option wasn't selected before I ran odin in both cases. I'm assuming by CM7 you mean cyanogenmod? Sorry for the ignorance, I just want to make sure I'm doing what I need to to get it back in working condition
Click to expand...
Click to collapse
I've got no idea what boxhead72 is going on about, but anyway, to be able to help you, we need to know what you've done. Generally, you need to make sure you're flashing a correct ROM/kernel/modem for your device. You also might need to reset to factory settings. But without knowing what you've done, it's impossible to say.
You can find stock ROMs and a guide for I9100 (if that is your phone's model) in Intratech's thread here: [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download.
On the plus side, if you can get to the boot screen, you are far better off than those who get NOTHING. I know it doesn't make you feel that good right now, but if you can get this far, your chances of recovery (if you follow instructions) are near 100%.
If you told us that you get no response at all from the phone when the power button was pressed, you might have room to worry a bit.
Now, not so much. Just take a minute to breathe and read through your steps as outlined in the above mentioned threads. You'll be fine in all likelihood.
Okay, I did some more searching and realized I was on the completely wrong forum... I have the AT&T U.S. I777 Galaxy S2. So exactly what I did was install kies, close out of it, put my phone into download mode, connect it to my computer, install what I assume was an incorrect .tar file using Odin while it was in download mode, let it reboot and am now seeing it hang at the boots screen with the yellow exclamation mark. I wouldn't mind reformatting it if someone could show me how, but I mainly want to use this guide:
http://forum.xda-developers.com/showthread.php?t=1285894
to root it and install CM7. Could I just run odin again and install the .tar file given in these instructions? Or does it not quite work like that? Thanks for all the help you guys are giving by the way!
Totalrapture said:
Okay, I did some more searching and realized I was on the completely wrong forum... I have the AT&T U.S. I777 Galaxy S2. So exactly what I did was install kies, close out of it, put my phone into download mode, connect it to my computer, install what I assume was an incorrect .tar file using Odin while it was in download mode, let it reboot and am now seeing it hang at the boots screen with the yellow exclamation mark. I wouldn't mind reformatting it if someone could show me how, but I mainly want to use this guide:
http://forum.xda-developers.com/showthread.php?t=1285894
to root it and install CM7. Could I just run odin again and install the .tar file given in these instructions? Or does it not quite work like that? Thanks for all the help you guys are giving by the way!
Click to expand...
Click to collapse
I don't know anything about that phone, but a quick look in those forums shows:
[Heimdall][Odin][Stock][Root]UCKH7 Return/Unbrick to Stock (or Root)
and
[ROM] CyanogenMod 7 for the Samsung Galaxy S II (AT&T) :: V7.1.0 RC1 (9 Oct 2011)
Thanks for those, I was actually reading through them when I noticed you posted them. I have another problem now though, I ran the stock rom through odin in this guide:
http://forum.xda-developers.com/showthread.php?t=1286432
but it failed in Odin and upon reboot it says firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. I didn't know kies had a recovery mode, but when I connect my phone it always fails to connect. Note that I CAN still get into the download menu, but that's it. At this point is there anything else I can do?
Totalrapture said:
it failed in Odin and upon reboot it says firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. I didn't know kies had a recovery mode
Click to expand...
Click to collapse
I presume Kies recovery mode is in Kies -> Tools -> Emergency firmware recovery.
I noticed that as well but like I said I cannot connect to Kies so any recovery mode isn't very helpful
Totalrapture said:
At this point is there anything else I can do?
Click to expand...
Click to collapse
I guess if you've done everything on [Guide] How to Prepare Your Phone to Return to the Store or for Warranty Replacement (which is linked at the bottom of the thread I linked earlier), then your next port of call should be Recovering an ATT Galaxy S2 after flashing GT-I9100 Firmware.
My friend has an S2 he wants me to root, and I'm having trouble.
I've tried the one click method from windows computers though they don't seem to work as he is on ICS.
The ICS alternative says reboot to recovery etc, though obviously he doesn't have recovery so I can't do that either.
Of course I'm going to be told to root it via flashing, though while following the guide, the phone soft-bricked and wouldn't turn on (yellow triangle) though luckily I found the Orange UK Restore Package and now it's back to stock!
When I tried to flash it said use the most similar kernel you can find, and so I did, and it didn't work!
The kernel he has is I9100PBVLP6 and there was not an insecure kernel of that available.
Can anyone help?
tomhurst said:
My friend has an S2 he wants me to root, and I'm having trouble.
I've tried the one click method from windows computers though they don't seem to work as he is on ICS.
The ICS alternative says reboot to recovery etc, though obviously he doesn't have recovery so I can't do that either.
Of course I'm going to be told to root it via flashing, though while following the guide, the phone soft-bricked and wouldn't turn on (yellow triangle) though luckily I found the Orange UK Restore Package and now it's back to stock!
When I tried to flash it said use the most similar kernel you can find, and so I did, and it didn't work!
The kernel he has is I9100PBVLP6 and there was not an insecure kernel of that available.
Can anyone help?
Click to expand...
Click to collapse
Your friend has the UK Orange NFC phone. Use LP7 Insecure kernel.
http://download.chainfire.eu/158/CF-Root/SGS2/CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5.zip?retrieve_file=1
You will have the yellow triangle after flashing and your binary flash counter would have increased by 1.
You can use triangle away to remove the symbol and reset the flash counter to zero.
Or have a look at the Root/Unroot guide in my signature.
Sent from my GT-I9100P using Xparent ICS Blue Tapatalk 2
bored_stupid said:
Your friend has the UK Orange NFC phone. Use LP7 Insecure kernel.
You will have the yellow triangle after flashing and your binary flash counter would have increased by 1.
You can use triangle away to remove the symbol and reset the flash counter to zero.
Or have a look at the Root/Unroot guide in my signature.
Sent from my GT-I9100P using Xparent ICS Blue Tapatalk 2
Click to expand...
Click to collapse
That's brilliant! Thanks so much. I'll have to convince him to let me now. He doesn't want me going near his phone again haha
If your friend now doesn't want you to go to near his phone, let him root it himself or live with it the way it is.
Statements like "he obviously doesn't have recovery" when he obviously does lead me to believe you'll only damage his phone anyway.
bored_stupid said:
Your friend has the UK Orange NFC phone. Use LP7 Insecure kernel.
Click to expand...
Click to collapse
So I just flash this under PDA? Will this give just root and no recovery?
oinkylicious said:
If your friend now doesn't want you to go to near his phone, let him root it himself or live with it the way it is.
Statements like "he obviously doesn't have recovery" when he obviously does lead me to believe you'll only damage his phone anyway.
Click to expand...
Click to collapse
Why does he obviously have recovery? His phone is exactly how he got it. Unless they give you recovery now? I used to have a Spica (piece of crap) which I had to root in order to get recovery onto it. And he has no idea how to root and his phone is being slow and crashes a lot, so he wants to make it better, I told him a custom ROM would help.
tomhurst said:
So I just flash this under PDA? Will this give just root and no recovery?
Why does he obviously have recovery? His phone is exactly how he got it. Unless they give you recovery now? I used to have a Spica (piece of crap) which I had to root in order to get recovery onto it. And he has no idea how to root and his phone is being slow and crashes a lot, so he wants to make it better, I told him a custom ROM would help.
Click to expand...
Click to collapse
All new or old S2s should have recovery albeit stock 3e recovery," if they have not installed another recovery ". Try it!
Power down. Then at the same time press:- volume up/home button/power button.
Sent from my GT-I9100 using Xparent ICS Blue Tapatalk 2
tomhurst said:
his phone is being slow and crashes a lot, so he wants to make it better, I told him a custom ROM would help.
Click to expand...
Click to collapse
You told him bogus information then.
tomhurst said:
My friend has an S2 he wants me to root, and I'm having trouble.
I've tried the one click method from windows computers though they don't seem to work as he is on ICS.
The ICS alternative says reboot to recovery etc, though obviously he doesn't have recovery so I can't do that either.
Of course I'm going to be told to root it via flashing, though while following the guide, the phone soft-bricked and wouldn't turn on (yellow triangle) though luckily I found the Orange UK Restore Package and now it's back to stock!
When I tried to flash it said use the most similar kernel you can find, and so I did, and it didn't work!
The kernel he has is I9100PBVLP6 and there was not an insecure kernel of that available.
Can anyone help?
Click to expand...
Click to collapse
Head over to here: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=1#regiona, & find the specific firmware for your friends device & flash in PDA via Odin! (no need to find a seperate kernel to flash, as it will be included in the official firmware package!)
At this point you'll have no yellow triangle on your boot up splash screen, & no flash count!
Then head over to here: http://forum.xda-developers.com/showthread.php?t=1501719 & root the device using the instructions given! (you'll need an external sd-card in your device to put the files on for rooting!)
Still no yellow triangle on boot splash screen, & also no extra flash count!
Finally, install Triangle Away from here "IF NEEDED": https://play.google.com/store/apps/details?id=eu.chainfire.triangleaway&hl=en, & "MAKE SURE" it gives the exact same flash count number as is in download mode, then click "Reset Counter".
Job done, official stock firmware with root (fast, stable & reliable!) with no yellow triangle or flash count visible!
What Samsung official firmware site? Even if such a thing existed why would the custom binary counter go up? Think about it. Also, OP already made it clear he's incapable of following those root instructions, as he apparently (and obviously) doesn't have recovery.
oinkylicious said:
You told him bogus information then.
Click to expand...
Click to collapse
What will help then? If you're going to put me down at least be constructive please.
tomhurst said:
What will help then? If you're going to put me down at least be constructive please.
Click to expand...
Click to collapse
What will help before you potentially brick your friends phone is to read the stickies.
Stickies here
Hopefully you might learn the basics of rooting/unrooting and installing firmware before its to late
Sent from my GT-I9100 using Xparent ICS Blue Tapatalk 2
oinkylicious said:
What Samsung official firmware site? Even if such a thing existed why would the custom binary counter go up? Think about it. Also, OP already made it clear he's incapable of following those root instructions, as he apparently (and obviously) doesn't have recovery.
Click to expand...
Click to collapse
tomhurst said:
What will help then? If you're going to put me down at least be constructive please.
Click to expand...
Click to collapse
It's just his way, don't worry about it!
1: This samsung firmware site: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=1#regiona
Obviously exists eh!
2: As I mentioned in my (helpfull!) post, the method I directed him to uses temporary "Touch CWM Recovery" for him to get into to root!
3: The method he tried was the oneclick method! That's not the method I directed him to! (try reading the post properly before commenting, as you've so graciously pointed out to me in the past!)
I hope this answers all of your descrepancies oinkylicious!
CrackDaddy said:
It's just his way, don't worry about it!
1: This official samsung firmware site: http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9100&r=1#regiona
Obviously exists eh!
Click to expand...
Click to collapse
Actually Samfirmware.com is an unofficial site, not endorsed by Samsung at all.
although it is where to get the Samsung firmware's for all their phones.
bored_stupid said:
Actually Samfirmware.com is an unofficial site, not endorsed by Samsung at all.
although it is where to get the Samsung firmware's for all their phones.
Click to expand...
Click to collapse
Fair enough, well I won't split ends with you & thanks for the usefull information bored_stupid!
1) not official
2) it wouldn't go up "AGAIN" after flashing official firmware. Writing wrong information in CAPS doesn't make it right
3) I know, see 4)
4) he tried both and fell at the first hurdle.
Any more? Come at me bro.
oinkylicious said:
1) not official
2) it wouldn't go up after flashing official firmware.
Click to expand...
Click to collapse
I got the not official bit m8, get over yourself!
Really, I'm trying to help the bloke & all you can pick up on is "NOT OFFICIAL"?? please!
Any more? Come at me bro?? How old?...........
The more you post, the more foolish you look. Flashing an official binary from download mode will not increase your counter.
oinkylicious said:
The more you post, the more foolish you look. Flashing an official binary from download mode will not increase your counter.
Click to expand...
Click to collapse
& you're job on here I take it is to try & make people look stupid huh?
Like I said, how old?
Tell me something? what increases your binary count oinkylicious?
Flashing an unofficial binary from download mode. Such as CF-root or any of the custom kernels.
I just don't like people spreading incorrect information.
oinkylicious said:
Flashing an unofficial binary from download mode.
Click to expand...
Click to collapse
I stand corrected & edited your honour, at last, something creative to say
You's da man, whoop whoop!
he said the phone wouldn't boot & yellow triangle!
yellow triangle as far as I know= binary counter gone up!
Apart from using a jig, for which he'd also have to flash an older bootloader coz the phone's on ICS & it wouldn't work otherwise, what would you suggest to reset it?
Not false information I'm giving m8, just trying to be helpfull, & I can't see in what I originally posted how I wasn't trying to be helpfull really!? But you obviously can
So I decided to root my Samsung S2 i7777. Had years of experience flashing HTC hero and Hp touchpad. Thought this might be straightforward as well. Proceeded to get ODIN and ATTGalaxyS2RootStockZedomaxKernel.tar. Flashed it and got pass. Phone proceeded to reboot and was stuck on the Exclamation mark. Tried restarting but no luck same thing. Initially had CWM coming in when I tried the Volume and Power button trick but could not do anything beyond that.
Then I decided that maybe my flash was not proper with that file so I took the siyah kernel and flashed that. This was a pass as well and then back to...the exclamation mark. Now, I cannot get CWM and retarating the phone with the USB connected lets me get into the Downloading window, but I cannot do anything beyond it.
What can I do? Do I need to flash a ROM- is that why I am stuck? How should I flash the ROM from ODIN- if I do get CWM back, can I put the ROM on the SD card and flash it using CWM?
Please help- I am getting stressed out and if I do recover from this, I am going to take a break from rooting :laugh:
g.kupster said:
So I decided to root my Samsung S2 i7777. Had years of experience flashing HTC hero and Hp touchpad. Thought this might be straightforward as well. Proceeded to get ODIN and ATTGalaxyS2RootStockZedomaxKernel.tar. Flashed it and got pass. Phone proceeded to reboot and was stuck on the Exclamation mark. Tried restarting but no luck same thing. Initially had CWM coming in when I tried the Volume and Power button trick but could not do anything beyond that.
Then I decided that maybe my flash was not proper with that file so I took the siyah kernel and flashed that. This was a pass as well and then back to...the exclamation mark. Now, I cannot get CWM and retarating the phone with the USB connected lets me get into the Downloading window, but I cannot do anything beyond it.
What can I do? Do I need to flash a ROM- is that why I am stuck? How should I flash the ROM from ODIN- if I do get CWM back, can I put the ROM on the SD card and flash it using CWM?
Please help- I am getting stressed out and if I do recover from this, I am going to take a break from rooting :laugh:
Click to expand...
Click to collapse
I think you should head over to the stickies and look for creepyncrawly's thread. It sounds like you should also be able to flash firmware through download mode if kernels are working. Also, stay away from galaxys2root and zedomax in the future
Sent from my SGH-I777 using Tapatalk 2
g.kupster said:
So I decided to root my Samsung S2 i7777. Had years of experience flashing HTC hero and Hp touchpad. Thought this might be straightforward as well. Proceeded to get ODIN and ATTGalaxyS2RootStockZedomaxKernel.tar. Flashed it and got pass. Phone proceeded to reboot and was stuck on the Exclamation mark. Tried restarting but no luck same thing. Initially had CWM coming in when I tried the Volume and Power button trick but could not do anything beyond that.
Then I decided that maybe my flash was not proper with that file so I took the siyah kernel and flashed that. This was a pass as well and then back to...the exclamation mark. Now, I cannot get CWM and retarating the phone with the USB connected lets me get into the Downloading window, but I cannot do anything beyond it.
What can I do? Do I need to flash a ROM- is that why I am stuck? How should I flash the ROM from ODIN- if I do get CWM back, can I put the ROM on the SD card and flash it using CWM?
Please help- I am getting stressed out and if I do recover from this, I am going to take a break from rooting :laugh:
Click to expand...
Click to collapse
You shouldn't take a break from rooting. You are just one of a very large group of people that have been blindsided by the galaxys2root website and its rogue developer zedomax. The firmware tools from that site have caused untold problems for people, similar to your problem.
To recover your phone, you need to first flash back to stock. Since you want to root the phone, and ultimately install custom firmware, you should first flash UCKH7 stock plus root package using the one-click downloader which you can get from the guide about how to flash custom binaries without incrementing the flash counter. The link for the guide is in my signature. Read the guide and follow it's directions. That should get you going again. If for some reason you have any trouble, post back here and we'll try to help you out.
Nick281051 said:
I think you should head over to the stickies and look for creepyncrawly's thread. It sounds like you should also be able to flash firmware through download mode if kernels are working. Also, stay away from galaxys2root and zedomax in the future
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
Thanks I checked it out..seems like putting the Stock back on might help me. Just so that I understand this better before I do it, am I installing the UCLE5_Stock_Rooted.tar using ODIN and that is enough to get me through.
Thanks
creepyncrawly said:
You shouldn't take a break from rooting. You are just one of a very large group of people that have been blindsided by the galaxys2root website and its rogue developer zedomax. The firmware tools from that site have caused untold problems for people, similar to your problem.
To recover your phone, you need to first flash back to stock. Since you want to root the phone, and ultimately install custom firmware, you should first flash UCKH7 stock plus root package using the one-click downloader which you can get from the guide about how to flash custom binaries without incrementing the flash counter. The link for the guide is in my signature. Read the guide and follow it's directions. That should get you going again. If for some reason you have any trouble, post back here and we'll try to help you out.
Click to expand...
Click to collapse
Thanks for stopping by. I did not see your post when I posted my reply to the previous poster..I am so worried that I might screw it up more that I wanted to be doubly sure about this. from what I read, I am doing Step 2c as indicated below. Am I correct?
Thanks
2c.) How to root by flashing Entropy512's Return/Unbrick to Stock, Kernel + Rooted System Package with Modem using Odin3 One-Click Downloader (Windows)
UPDATE: I did download the "Odin3 One-Click Downloader Stock I-777 UCKH7 with Root no BL" package and extracted the file. Double clicked on it with the phone connected and all I see are the words I777- UCKH7 with Root with a lot of empty boxes below. Went to Odin and I see the phone connected (Com has yellow box) but nothing else is ticked off. Clicking Start does not do anything at all.
At my wits end- will not get any sleep tonite if I don't fix it.
Thanks in advance
I had a similar thing happen after trying to make a backup of the stock rom with Rom Manager (Yes, I know now, thanks much.)
If you keep trying new kernels/roms and it never clears up, you're pretty much stuck with wiping data. It won't wipe your sdcard, but more and more apps are sticking their data in the phone's memory rather than on the sdcard, so if you can get a backup at all, you really should.
Source: Was up until 2:30 the other night trying to make my phone work again. The above is a GUESS - it's probable I missed something that creepyncrawly wouldn't.
Ok more progress..turned off the phone and started 'I777UCKH7 OCD With Root.exe". Got the same window with lot of empty boxes. Had turned off the phone by this time and disconnected it. Now, I connected the phone and pressed the volume buttons. Phone goes into Download mode. Now, the Odin3 window has a Com port for the phone. Now I press start and it goes through a bunch of things before it declares "FAIL" in red. What do I do?
Evidently, the zedomax product you originally flashed, or perhaps the siyah kernel that you flashed second, has made some undesired modification. I'd like to know exactly which package you flashed for each one of these first before I suggest which way to start correcting the problem. Can you please post working links for each of the two downloads that you used? You should still be fine, and will be able to recover the phone.
creepyncrawly said:
Evidently, the zedomax product you originally flashed, or perhaps the siyah kernel that you flashed second, has made some undesired modification. I'd like to know exactly which package you flashed for each one of these first before I suggest which way to start correcting the problem. Can you please post working links for each of the two downloads that you used? You should still be fine, and will be able to recover the phone.
Click to expand...
Click to collapse
This stuff makes me so sad seeing these threads............ Thanx for helping him Creepy, ALWAYZ with 100% accurate info!!! Looks like this is the page he got the tar from in the zip on step 3 http://galaxys2root.com/galaxy-s2-root/how-to-root-att-galaxy-s2-sgh-i777/ Much respect Creepy.....
creepyncrawly said:
Evidently, the zedomax product you originally flashed, or perhaps the siyah kernel that you flashed second, has made some undesired modification. I'd like to know exactly which package you flashed for each one of these first before I suggest which way to start correcting the problem. Can you please post working links for each of the two downloads that you used? You should still be fine, and will be able to recover the phone.
Click to expand...
Click to collapse
The first one was http://galaxys2root.com/galaxy-s2-root/how-to-root-att-galaxy-s2-sgh-i777/
The second one was http://galaxys2root.com/galaxy-s2-root/how-to-root-ics-on-att-galaxy-s2-sgh-i777/
Now I know I need to stay away from galaxy2root. Thanks for looking at this. The status of the phone is I can go into Download mode by pressing volume buttons and connected to USB. ODIN can see the phone (COM is yellow with number). Nothing happens beyond that..
g.kupster said:
The first one was http://galaxys2root.com/galaxy-s2-root/how-to-root-att-galaxy-s2-sgh-i777/
The second one was http://galaxys2root.com/galaxy-s2-root/how-to-root-ics-on-att-galaxy-s2-sgh-i777/
Now I know I need to stay away from galaxy2root. Thanks for looking at this. The status of the phone is I can go into Download mode by pressing volume buttons and connected to USB. ODIN can see the phone (COM is yellow with number). Nothing happens beyond that..
Click to expand...
Click to collapse
The zedomax rooting kernel you flashed first is for Gingerbread version UCKH7, and was posted last October, shortly after the phone was released. If you had UCKH7 on the phone before you flashed that, it should have booted up fine. Most people I have heard about are able to use that rooting kernel successfully. So I need more information in order to be able to trouble shoot your situation.
First, are you sure your phone is SGH-I777, and not SGH-I727?
What firmware was installed on the phone before you flashed the zedomax kernel?
Has any other modification been done on the phone since or even before you had it?
The second kernel you flashed, the Siyah kernel, is an ICS kernel, version 3.4.2. The phone will not boot if the kernel and the system have different versions installed. So I need as much detailed information as possible so know what to do next.
creepyncrawly said:
The zedomax rooting kernel you flashed first is for Gingerbread version UCKH7, and was posted last October, shortly after the phone was released. If you had UCKH7 on the phone before you flashed that, it should have booted up fine. Most people I have heard about are able to use that rooting kernel successfully. So I need more information in order to be able to trouble shoot your situation.
First, are you sure your phone is SGH-I777, and not SGH-I727?
What firmware was installed on the phone before you flashed the zedomax kernel?
Has any other modification been done on the phone since or even before you had it?
The second kernel you flashed, the Siyah kernel, is an ICS kernel, version 3.4.2. The phone will not boot if the kernel and the system have different versions installed. So I need as much detailed information as possible so know what to do next.
Click to expand...
Click to collapse
The phone is SGH-I777 from AT&T. (I'll check the phone when I get home and reconfirm) The phone had the ICS installed (through the Kies update) before I (stupidly) tried the Zedomax Kernel. I just bought the phone new so no other modification had been done. After I had installed the Zedomax I had been able to see CWM if I did the power Volume trick but I cannot do it now since I installed the Siyah.
Hope that helps. Let me know if you need more info.
g.kupster said:
The phone is SGH-I777 from AT&T. (I'll check the phone when I get home and reconfirm) The phone had the ICS installed (through the Kies update) before I (stupidly) tried the Zedomax Kernel. I just bought the phone new so no other modification had been done. After I had installed the Zedomax I had been able to see CWM if I did the power Volume trick but I cannot do it now since I installed the Siyah.
Hope that helps. Let me know if you need more info.
Click to expand...
Click to collapse
OK. The phone was new, and most likely came with Gingerbread 2.3.6 UCKK6 installed. You updated it using kies to ICS 4.0.3 UCLE5. Just asking for your confirmation here.
Then you tried to root with zedomax kernel, which is a Gingerbread 2.3.4 UCKH7 kernel, which explains why it flashed successfully, but failed to boot, since you can't have a Gingerbread kernel and an ICS system together. You were able to boot into ClockworkMod Recovery in the kernel though. We can't blame this problem on zedomax. That kernel usually works ok. You started modifying your phone before you were familiar enough with the phone and it's firmware. The error of flashing a Gingerbread kernel onto an ICS system was yours.
Next you flashed the Siyah v3.4.2 ICS kernel. This kernel should be compatible with the UCLE5 system files that are on the phone. It seems to me that the phone should now boot, and I'm not really sure from this sequence what might have been altered that prevented the phone from booting and also prevented the Odin flash back to stock from succeeding. The only thing you have flashed so far is two kernels. No other partitions should have been touched.
What kind of error message do you get when you try to boot into recovery mode using vol+ vol- Pwr?
creepyncrawly said:
OK. The phone was new, and most likely came with Gingerbread 2.3.6 UCKK6 installed. You updated it using kies to ICS 4.0.3 UCLE5. Just asking for your confirmation here.
Then you tried to root with zedomax kernel, which is a Gingerbread 2.3.4 UCKH7 kernel, which explains why it flashed successfully, but failed to boot, since you can't have a Gingerbread kernel and an ICS system together. You were able to boot into ClockworkMod Recovery in the kernel though. We can't blame this problem on zedomax. That kernel usually works ok. You started modifying your phone before you were familiar enough with the phone and it's firmware. The error of flashing a Gingerbread kernel onto an ICS system was yours.
Next you flashed the Siyah v3.4.2 ICS kernel. This kernel should be compatible with the UCLE5 system files that are on the phone. It seems to me that the phone should now boot, and I'm not really sure from this sequence what might have been altered that prevented the phone from booting and also prevented the Odin flash back to stock from succeeding. The only thing you have flashed so far is two kernels. No other partitions should have been touched.
What kind of error message do you get when you try to boot into recovery mode using vol+ vol- Pwr?
Click to expand...
Click to collapse
That seems correct (with regards to the sequence of events of the phone).
The error message is just the words "SAMSUNG GALAXY SII GT1900"..with a huge exclamation at the bottom. It stays like that until I do a battery pull.
g.kupster said:
That seems correct (with regards to the sequence of events of the phone).
The error message is just the words "SAMSUNG GALAXY SII GT1900"..with a huge exclamation at the bottom. It stays like that until I do a battery pull.
Click to expand...
Click to collapse
Please verify this - the screen says "Samsung Galaxy SII GT-I9100" assuming yours was a typo. Yellow triangle with exclamation mark?
This is what you get when you try to boot the phone normally, and also when you try to enter recovery mode using the three button method, vol+ vol- and power?
creepyncrawly said:
Please verify this - the screen says "Samsung Galaxy SII GT-I9100" assuming yours was a typo. Yellow triangle with exclamation mark?
This is what you get when you try to boot the phone normally, and also when you try to enter recovery mode using the three button method, vol+ vol- and power?
Click to expand...
Click to collapse
Yes, that is correct. It was a typo. I get the exclamation mark when I do the normal boot. I am going to confirm this evening if I get the same error with the 3 button method.
g.kupster said:
Yes, that is correct. It was a typo. I get the exclamation mark when I do the normal boot. I am going to confirm this evening if I get the same error with the 3 button method.
Click to expand...
Click to collapse
Post the answer when you have your phone in hand and I'll suggest something to try.
creepyncrawly said:
Post the answer when you have your phone in hand and I'll suggest something to try.
Click to expand...
Click to collapse
Ok, I tried that just now and I got a message 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again'. There is an image of a cell phone and computer with an exclamation mark between them
g.kupster said:
Ok, I tried that just now and I got a message 'Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again'. There is an image of a cell phone and computer with an exclamation mark between them
Click to expand...
Click to collapse
I'm not working from first hand experience, but I'm fairly good at correlating information and making deductions. Something in the sequence of events doesn't add up to me. You're sure you have the I777? You pulled the battery and looked at the label?
At this point any suggestions that I can offer are based on educated speculation. The first thing to try would be to flash an ICS kernel using Odin, but you have already done that. I would suggest that you try that again, but discard the tar you already have and download the tar again, from here. That may be the same place you downloaded it before, not sure. Be sure to use the original USB cable that came with the phone.
i have my wifes att gs2. i rooted succesfully with official ics version. made a nandroid backup. attempted to flash an aokp rom (which is what i use on my lg phone). upon reboot it just stuck at samsung gs2 screen. couldnt get into recovery to restore the backup at first. now i am able to get into recovery but now it get and md5 mistmatch when tryin to restore the backup. when i rooted it changed the boot screen to i9100 when the phone is an i777. please help.
thanks
woodardbg said:
i have my wifes att gs2. i rooted succesfully with official ics version. made a nandroid backup. attempted to flash an aokp rom (which is what i use on my lg phone). upon reboot it just stuck at samsung gs2 screen. couldnt get into recovery to restore the backup at first. now i am able to get into recovery but now it get and md5 mistmatch when tryin to restore the backup. when i rooted it changed the boot screen to i9100 when the phone is an i777. please help.
thanks
Click to expand...
Click to collapse
You need to read a little more. The i9100 screen is because you have tripped the flash counter. Recovery is holding power and both volumes forever. Then you Factory reset.
Also maybe next time make the thread title something about the problem you're having. HELP isn't really telling much.
122ninjas said:
You need to read a little more. The i9100 screen is because you have tripped the flash counter. Recovery is holding power and both volumes forever. Then you Factory reset.
Click to expand...
Click to collapse
ive been trying to read up on it. unfortunatley there are different methods scattered everywhere and confusing. however when i do a factory reset its sticks at gs2 gti9100 screen. if you can point me to a thread that has a fix i'd appreciate it. coming from lg forums, these gs2 forums and fixes are a little confusing to me. i guess because of the different variants of the s2's.
thanks
Phalanx7621 said:
Also maybe next time make the thread title something about the problem you're having. HELP isn't really telling much.
Click to expand...
Click to collapse
Not to mention it is also useless for those who respect the forum by doing a search before posting.
woodardbg said:
ive been trying to read up on it. unfortunatley there are different methods scattered everywhere and confusing. however when i do a factory reset its sticks at gs2 gti9100 screen. if you can point me to a thread that has a fix i'd appreciate it. coming from lg forums, these gs2 forums and fixes are a little confusing to me. i guess because of the different variants of the s2's.
thanks
Click to expand...
Click to collapse
Factory reset then flash AOKP FOR OUR PHONE
122ninjas said:
Factory reset then flash AOKP FOR OUR PHONE
Click to expand...
Click to collapse
thanks for your help 122nijas.... ive tried a "supposedly" aokp rom for gs2 i777 but it doesnt come up after reboot. just hangs at the gs2 i9100 screen. i have tried a couple more but nothing seems to work to get a working driver. to me it seems like if i flash a compatible rom, it should work. i am able to get into cmw fine. on top of that, my backup that i did have that had md5 mismatch is no longer there. so when i connect to my pc and usb and navigate to clockwork mod folder it says file is corrupt. so now i have lost that initial bacup it seems.
so what course of action do you think i should try now?
again thanks for ur help
woodardbg said:
thanks for your help 122nijas.... ive tried a "supposedly" aokp rom for gs2 i777 but it doesnt come up after reboot. just hangs at the gs2 i9100 screen. i have tried a couple more but nothing seems to work to get a working driver. to me it seems like if i flash a compatible rom, it should work. i am able to get into cmw fine. on top of that, my backup that i did have that had md5 mismatch is no longer there. so when i connect to my pc and usb and navigate to clockwork mod folder it says file is corrupt. so now i have lost that initial bacup it seems.
so what course of action do you think i should try now?
again thanks for ur help
Click to expand...
Click to collapse
Where are you getting the rom from
Flash another rom ... and for the i9100 screen use this http://forum.xda-developers.com/showthread.php?t=1494114
Sent from my SAMSUNG-SGH-I777
hate to admit it, but i need help
my aim is to get to stock jb.
to get there, i wanted to first install cwm, so that i could make a nandroid backup.
i rooted it easily enough, but discovered i hadnt got cwm (i havent done this in a while, last time i did was on a htc desire, and the methods were different).
so i then found a guide for the i9100 (my model) to get cwm.
i downloaded odin and the cwm file, and, selected pda in odin, selected the file, and flashed. odin did its thing, and said successful, but on turning on the phone i just get 'samsung galaxy s2' with a yellow triangle.
it wont boot past that.
it wont boot into recovery now, but i can get into download mode.
i have downloaded the spanish JB firmware from sammobile (I9100XWLSD_I9100FOPLS4_FOP), but inside the zip there is only I9100XWLSD_I9100FOPLS4_I9100XXLS8_HOME.tar.md5
i thought thered be other files?
would someone be so kind as to point me in the right direction.
im currently still at the yellow triangle (after flashing cwm), i dont want to do anything yet, as i dont want to cause any damage.
thanks
Just boot into odin and flash the JB rom via PDA section of ODIN. Then flash Siyah v6 beta 4 again via PDA section.
Once rom has booted install and use Triangle Away to remove yellow triangle.
done, and all is good.
thanks
ok, all was going well until tonight.
the phone turned off, and would not turn on again.
it just gets stuck at the samsung logo.
flashed stock rom with odin- no change.
flashed siyah kernel with odin, it now gets passed the samsung logo, but sticks at the siyah logo.
i can boot to download mode, but not recovery mode.
any help would be appreciated.
Tell us your Galaxy model. Open the battery cover, remove the battery and make a photo.
Sent from my GT-I9100 using xda app-developers app
Flash lsj via odin.
Only code, phone and csc.
Sent from the little guy
gogoultra said:
Tell us your Galaxy model. Open the battery cover, remove the battery and make a photo.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
s2, i9100. (im the op of this thread)
gastonw said:
Flash lsj via odin.
Only code, phone and csc.
Sent from the little guy
Click to expand...
Click to collapse
will do.
got a link to lsj by any chance? (or is it one of the ones on sammobile)
thanks guys
Search for "jelly bean test firmware" in goole, it'll get you to sammobile.com
Sent from the little guy
gastonw said:
Flash lsj via odin.
Only code, phone and csc.
Sent from the little guy
Click to expand...
Click to collapse
update, it worked perfectly.
flashed LSJ, which then booted, then reflashed the latest official (LSE, was on LSD but thought why not try LSE )
Thanks so much!!!
Great news then, good luck!
Sent from the little guy