Related
There are quite a few ICS Preview ROMs out there in the development subforum. But which one is the best by far? Please give me a link.
Roman's IMO, as it is constantly updated, Links are on the Development section.
Misledz said:
Roman's IMO, as it is constantly updated, Links are on the Development section.
Click to expand...
Click to collapse
Agree. The rest are just builds. Romann's is tweaked. Use the milestone 4 (not build 28) cause it changes your tab's MAC address.
i went to the development section and looked for any thread started by roman. i did not find any, can you give what's the thread name itself or a link? i see many kang there but i dunno if that is it.
Sent from my GT-P7510 using Tapatalk
It's in the first page, in his post, Why is that so hard to read?
DOWNLOADS
Find the latest releases here
Find milestone-4 here
Click to expand...
Click to collapse
http://forum.aokp.co/page/releases
You click on a build, and find your device name. Ignorance is bliss.
Hi, thanks for the information. I flashed the milestone-4 ROM as instructed. But I was stucked at the initial setup step, where it says 'Turning on Wi-Fi...'. I tried to hit the Skip button. But nothing happened. It seemed that the whole system was stucked. It's been like that for hours. Now what should I do?
Sent from my Milestone using Tapatalk
jerminhu said:
Hi, thanks for the information. I flashed the milestone-4 ROM as instructed. But I was stucked at the initial setup step, where it says 'Turning on Wi-Fi...'. I tried to hit the Skip button. But nothing happened. It seemed that the whole system was stucked. It's been like that for hours. Now what should I do?
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
For me aokp gave me glitches in the screscreen the 3/25 cm9 nightly build is running way nicer not all the from control ..
I think you can give it a soft reboot to fix it. Hopefully it shouldn't bootloop
boot into CWM, do a factory reset, clear cache.
Then go to the advanced menu and select "fix permissions". That can help a lot of bugs. If that still doesn't work, I would re-download and flash the rom again. I'm running AOKP CM9 milestone 4 on two different devices just fine.
Thank you guys. I did a hard reset and everything was OK after that.
I just flashed the AOKP Build 28 ICS ROM and so far I really like it compared to the Task V14 ROM that I previously had which random reboots.
What is the difference between roman's AOKP and KANG rom from seraphimserapis?
I'm using Kang and would love to know this also.
Sent from my Samsung Galaxy Tab 10.1 using XDA Premium HD App.
best ice creame.
does camera work?
galaxy tab p7500
sudhirkoli said:
does camera work?
galaxy tab p7500
Click to expand...
Click to collapse
I can't tell if this guy is trolling, or just a complete idiot.
Best ICS ROM
Dear,
I am completely newbie for this forum, I have Galaxy Tab 10.1 (3g), I flashed with latest Cyanogenmod 4.0.3 and stuck with camera functionality.
I do not know, whether this suggested ROM works with all functionality.
Very sorry if, I posted at wrong place.
For the love of Jesus and all mankind, learn to read before you post.
It clearly says in the OP, CAMERA DOES NOT WORK, has reading become an optional skill now?
ok i get it now. aokp means android open kang project. the poster's name is romanbb and not roman. also, in this thread nothing was said in the op that camera does not work. the op is asking what is the best ics rom. anyways when i got time i will try this aokp. thanks again.
Sent from my GT-P7510 using Tapatalk
Bast ICS
Thanks for info, and kind support.
I'm running pershoots and get random closes on flaps and a couple other apps. Also the browser will randomly stop loading pages and needs to be closed then reopened to get working again.
It installed very well but reading the aokp thread there seems to be a fair number of problems with installs that are keeping me from trying it. Are those people just dummies who don't bother tp do full wipes or do things randomly go wrong?
So I have been running CM10 nightlies since they first came out for the I9100int.
Been loving them, they seem to work really well, however last night I started getting the error, "android keyboard (aosp) has stopped working"
Fortunately I have a second keyboard to use, but I was wondering if anyone else has had this error.
I cannot seem to find much about it anywhere, so I figured Ill ask the source.
I have cleared the keyboard cache, but that doesnt make any difference.
The last time this happened I had to do a full flash and I was hoping to avoid that.
even reverting to a backup hasnt seemed to fix it, so Im not sure if my backup had the issue too.
anyways, just thought Id throw this out there for any help.
Otherwise Id like to give a HUGE thanks to all the developers with this project, I love my S2 more and more with constant updates they provide.
Go into menu/system/apps and find android keyboard asop and CLEAR DATA Then do the same for Dictionary Provider and CLEAR DATA.
Sent from My SGH-I777 Running Red Reaper Rom
RockRatt said:
Go into menu/system/apps and find android keyboard asop and CLEAR DATA Then do the same for Dictionary Provider and CLEAR DATA.
Sent from My SGH-I777 Running Red Reaper Rom
Click to expand...
Click to collapse
SICK!!! thanks so much this worked perfectly..
T869
Awesome. Worked like a charm on my SGH-T869 running CyanogenMod Ver. 10-20121007--T869.
RockRatt said:
Go into menu/system/apps and find android keyboard asop and CLEAR DATA Then do the same for Dictionary Provider and CLEAR DATA.
Sent from My SGH-I777 Running Red Reaper Rom
Click to expand...
Click to collapse
On my Galaxy Note N7000 after an install of the current nightly CM10, some weeks later I get this message and the only way I can fix it is with a Factory Reset/wipe. This has happened a few times now. From the Settings app, I can get into System/Apps but there are no options like you mention above . .
It would be nice not to have to use the Factory Reset/wipe method . . is there a way of using your method on the N7000?
Thanks,
Phil.
cblock said:
SICK!!! thanks so much this worked perfectly..
Click to expand...
Click to collapse
I really can not find Dictionary Provider anywhere. Where is it??
Thanks in advance
RockRatt said:
Go into menu/system/apps and find android keyboard asop and CLEAR DATA Then do the same for Dictionary Provider and CLEAR DATA.
Sent from My SGH-I777 Running Red Reaper Rom
Click to expand...
Click to collapse
I have Sprint's S3 and when I flashed CM10 on it, I keep getting "android keyboard (aosp) has stopped working". I just flashed it so I don't have any other why to type or even get logged into the play store to download a new keyboard. Please help.
Subbu9 said:
I really can not find Dictionary Provider anywhere. Where is it??
Thanks in advance
Click to expand...
Click to collapse
I too cannot find "Dictionary Provider" anywhere. Any help would be appreciated. Thank you.
Galaxy Nexus
CM10
When you go setting/apps, make sure you swipe to the right so it says ALL at the top, not just downloaded, they're in there. I just had the same error hence my search here. Following the advice above worked for me on cyanogen mod
=deleted=
fozzy169 said:
When you go setting/apps, make sure you swipe to the right so it says ALL at the top, not just downloaded, they're in there. I just had the same error hence my search here. Following the advice above worked for me on cyanogen mod
Click to expand...
Click to collapse
Thanks for the reply fozzy --- I did a master reset/master clean and it fixed it all. Still can't see "Dictionary Provider" anywhere, incidentally...bizarre!
Appreciate it though. :good::good::good:
Woah, thanks!
Alright so I just got the CM10 update and I had the same error as you, and the fix worked well! Thanks c:
CommanderT1562 said:
Alright so I just got the CM10 update and I had the same error as you, and the fix worked well! Thanks c:
Click to expand...
Click to collapse
I can't see the dictionary app either. Anybody got any ideas why?
msimsie said:
I can't see the dictionary app either. Anybody got any ideas why?
Click to expand...
Click to collapse
Same problem here. I just flashed the Provision JB ROM and right away I can't use my keyboard at all. I cleared the data for the AOSP keyboard but I can't find the dictionary app.
same problem.. no dictionary provider. keyboards keeps on crashing (phone is Sk17i so bug is not related to phone itself)!
I've the same issue, even i can't type any letter !
I've cleared the data for Android keyboard ( from settings/apps.. ) , but it didn't work with me!
Also i can't find Directory provider in apps.
So, what to do?
I use SGT-P3100.
BRGRDS
I solved it by using gapps-jb-20120726-signed.zip
I faced the same issue yesterday when I installed cm10. I have xperia mini pro sk17i.
After a lot of trial and error, I solved the error doing:
wiping cache partition
factory reset
installing cm10 rom
installing gapps one version older: gapps-jb-20120726-signed.zip (I am new and unable to post a link, just google it.)
The main takeaway - use the older gapps and after install, update them using market. Maybe just doing this will solve the problem for you.
PS. I am using extender kernel by M66B
Even though I'm using the latest nightly for the samsung galaxy nexus I ran into this same issue. Cleared data for android keyboard but as others couldnt find the data dictionary so since I use a 3rd party keyboard anyways, I went back into android keyboard and disabled it. No more error for me, hope that helps.
The solution to this seems that the newes Gapps Version for JB is not compatible with 4.1.x. http://wiki.rootzwiki.com/Google_Apps#20121130.
So if your using Android 4.1.2 you have to stay with gapps 20121011.
20121130 is for Android 4.2 only. In that case a bad choice to stay with JB for the new release, as this cannot easyly be seen in the name of the zip package..
If you already installed 20121130 it should be sufficient to reinstall ROM and after that gapps version 20121011. If that doen't work you need to wipe..
miro279 said:
The solution to this seems that the newes Gapps Version for JB is not compatible with 4.1.x. http://wiki.rootzwiki.com/Google_Apps#20121130.
So if your using Android 4.1.2 you have to stay with gapps 20121011.
20121130 is for Android 4.2 only. In that case a bad choice to stay with JB for the new release, as this cannot easyly be seen in the name of the zip package..
If you already installed 20121130 it should be sufficient to reinstall ROM and after that gapps version 20121011. If that doen't work you need to wipe..
Click to expand...
Click to collapse
No luck, I needed to install a 3rd party keyboard. Strangely, the same method (flash rom+gapps) worked on a friend's phone.
Hi, this is the first PORTED ROM I release, and also the first P.A.C. ROM for the HOX+, I tryed to build from source for about 2 weeks and keept fixing errors, making needed files to just get new errors and new needed files not found and in the end I tryed to build CM just to see if I can even build that, and it worked, so I realised PACman was a bit over my powers and gave up and deleted the source, but after a bit KaptKeefmenneke sent me his PACman 22.1.1 and I sterted porting newer versions over it with great success, so here I am posting this rom after geting permisions from both KaptKeefmenneke and [vertigo] to post it.
This rom is for the INTERNATIONAL ONE X+
This rom was ported from the NEXUS4 over an unreleased P.A.C. 22.1.1 for the HOX+
I will update the rom as long as I can, and fix as many bugs as I can with my limited development knoledge.
This rom also has an OPD (OpenPDroid) patch that can be flashed after flashing the rom.
I hope you will enjoy it as much as I do.
Not working:
-no vibration when touching the touch buttons-did all that came into my mind but still can't make the vibrations work, even did the framework-res.apk edit that should enable it and no luck, if anyone has any Ideea I'd like to hear it.
-headsets not recognised, looking to find a fix but I am kinda blind at this part because I don't know what files contain things related to headset.
-same things as in all other aosp roms
-you tell me
Bugs:
-same things as in all other aosp roms
-OS is allways in black mode, the PAC in Black toggle doesen't do anything.
-you tell me
NOTE: for bugs that need it, post logs, I did not include the Sharelogs and Performance Tool apk's so you will have to download them, sorry, also even if I am not too much of a developer I can mostly read logs, also post if you find any fixes for any bugs, don't expect me to be able to fix all the bugs that may appear, remember I am preety new in the development thing and my knoledge is limited (verry limited as far as I understand) and my time is also limited due to school.
Working:
-mostly everything as far as I can see
I would not recommend using this rom with Xposed Framework even if it is great just because of the same reason it is not really working ok on AOKP (it will take longer for the SystemUI to load)
Downloads:
Rom: http://www.mediafire.com/download/mg8sdj47cs5fq9k/enrc2b_PAC_JB_4.2.2-v23.0.0.zip
Gapps: http://goo.im/gapps/gapps-jb-20130301-signed.zip
Kernel: Use CM10.1 kernel, DO NOT use the included kernel as many things will not work with it (wifi, bluetooth, etc)
OpenPDroid patch: http://www.mediafire.com/download/1..._4.2.2-v23.0.0-openpdroid-20130612-update.zip (No dark mode in Messages app, will try to fix, but don't think I can till I will manage to build from source) for the moment I would say just use XPrivacy if you can live with the SystemUI startup delay added by XPosed.
Thanks to...
ParanoidAndroid Team
CyanogenMod Team
AOKP Team
P.A.C. Team
Maxwen and Lloir for theyr great work on this device
[vertigo] for making the NEXUS4 rom (here:http://forum.xda-developers.com/showthread.php?t=21468790)
KaptKeefmenneke for making the P.A.C. 22.1.1 rom for enrc2b
FFU5y for OpenPDroid
mateorod for the Auto-Patcher
Reserved for changelog
Reserved also just in case.
I've removed some posts about permissions. Feel free to continue via PM and CC me if need be
Sorry if I missed it, but which version of the HOX+ will this work on?
For my purposes, does it work with AT&T version?
Arvoreen said:
Sorry if I missed it, but which version of the HOX+ will this work on?
For my purposes, does it work with AT&T version?
Click to expand...
Click to collapse
Nope, this is also for the international variant
Sent from my HTC One X+ using xda premium
aardappel12 said:
Nope, this is also for the international variant
Sent from my HTC One X+ using xda premium
Click to expand...
Click to collapse
I was afraid you would say that....
I might be wrong but shouldn't this be under the original android development section.
Nice work btw
Sent from my HTC One X+ using Tapatalk 2
flipside101 said:
I might be wrong but shouldn't this be under the original android development section.
Nice work btw
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
Nope, due to the fact that it is not built from source
Headphone/Earphone jack doesn't work. Music just plays on the phone speaker.
And is multi user supposed to work? I can't seem to setup a second user.
KiGWa said:
Headphone/Earphone jack doesn't work. Music just plays on the phone speaker.
And is multi user supposed to work? I can't seem to setup a second user.
Click to expand...
Click to collapse
Will have a look as soon a I reupload the rom, thanks for reporting.
Just so people are aware, pacman can and does have HUGE issues with some apps on the market.
Could someone that has this installed tell me if they have any problems with the signal (not getting signal at all), cause a friend had it when he flashed it to his X+ and I also did have the problems after wiping data, then fixed the problem as my friend told me to and then wiped data again and set up the device and did this process again and again lots of times and I only got that once, but at the first wipe data I had my data from the 22.1.1 pacman rom, if anyone else has this problem I will post a how to fix it in the OP, I am not sure if it is related to the rom or not, that is why I am not adding the bug and fix to the OP, for me it happened only once, and my friend has lots of apps installed so it may have been caused by an app for him, test if you have this problem and tell me please.
Ranomez said:
Could someone that has this installed tell me if they have any problems with the signal (not getting signal at all), cause a friend had it when he flashed it to his X+ and I also did have the problems after wiping data, then fixed the problem as my friend told me to and then wiped data again and set up the device and did this process again and again lots of times and I only got that once, but at the first wipe data I had my data from the 22.1.1 pacman rom, if anyone else has this problem I will post a how to fix it in the OP, I am not sure if it is related to the rom or not, that is why I am not adding the bug and fix to the OP, for me it happened only once, and my friend has lots of apps installed so it may have been caused by an app for him, test if you have this problem and tell me please.
Click to expand...
Click to collapse
I did not have any issue with signals on both wifi and mobile network. Though, before i adb pushed the rom/gapps zip, I did a full wipe of the system, data and caches. The phone was like totally empty before i install this ROM.
KiGWa said:
I did not have any issue with signals on both wifi and mobile network. Though, before i adb pushed the rom/gapps zip, I did a full wipe of the system, data and caches. The phone was like totally empty before i install this ROM.
Click to expand...
Click to collapse
Ok, thank you, also could you tell me if it is just me or even if the PAC in black toggle is off the os is still in the black ui?
Ranomez said:
Ok, thank you, also could you tell me if it is just me or even if the PAC in black toggle is off the os is still in the black ui?
Click to expand...
Click to collapse
yup, os ui is black even toggle is off.
Ranomez said:
Could someone that has this installed tell me if they have any problems with the signal (not getting signal at all), cause a friend had it when he flashed it to his X+ and I also did have the problems after wiping data, then fixed the problem as my friend told me to and then wiped data again and set up the device and did this process again and again lots of times and I only got that once, but at the first wipe data I had my data from the 22.1.1 pacman rom, if anyone else has this problem I will post a how to fix it in the OP, I am not sure if it is related to the rom or not, that is why I am not adding the bug and fix to the OP, for me it happened only once, and my friend has lots of apps installed so it may have been caused by an app for him, test if you have this problem and tell me please.
Click to expand...
Click to collapse
got no data signal,too.please post your solution.had same issue while trying to port pa2.5x (from N4,too),but never explored why.
thnksAlot,alex
maerdance said:
got no data signal,too.please post your solution.had same issue while trying to port pa2.5x (from N4,too),but never explored why.
thnksAlot,alex
Click to expand...
Click to collapse
Go to settings->More->Mobile Networks, wait for it to load, click automatically connect around 3 times, it will give you an error, but in 1 min you should be connected and allmostly sure that it should not happen again.
EDIT: Found a real solution, will upload a fixed rom when I get home in 5 and a half hours, at school now and getting ready for a exam.
EDIT2: found the solution and updated apktool to decompile framework, apply fix and recompile and get errors at recompiling......is there a special apktool for pacman or something?
->Ranomez:Go to settings->More->Mobile Networks, wait for it to load, click automatically connect around 3 times, it will give you an error, but in 1 min you should be connected and allmostly sure that it should not happen again.
chaos leads to a new order. how did you find out this kind of weird(individual?)
input/output behavier.
I suppose we found a proof of that android should be labelled alive : )
will 'apply' later. thank you for your afford in this rom in general.
greets, alex
maerdance said:
->Ranomez:Go to settings->More->Mobile Networks, wait for it to load, click automatically connect around 3 times, it will give you an error, but in 1 min you should be connected and allmostly sure that it should not happen again.
chaos leads to a new order. how did you find out this kind of weird(individual?)
input/output behavier.
I suppose we found a proof of that android should be labelled alive : )
will 'apply' later. thank you for your afford in this rom in general.
greets, alex
Click to expand...
Click to collapse
I may be sleepy or something wrong with me cause I just woke up and I can't remember half of yesterday but I don't understand anything of what you sayd.
Also for anyone that wants to help me can you please try to apply the fix at the bottom of the OP in this thread http://forum.xda-developers.com/showthread.php?t=1908008 to the framework in my rom, cause for me it doesen't work, I can not recompile the framework even if I don't change anything, so I decompile it and try to recompile and fail, also I get some errors at the decompilation part also, but it seems to decompile.....
EDIT: anyone having a problem that when you talk with someone the other person hears himself, cause dad told me that today, but no one else told me till now?
Hi,
I hope I'm in the right section for this.
Since I updated to Android 4.3 (latest HellyBean build), my phone crashes after a few screen orientation changes.
Does anyone know what the reason for this strange behaviour could be?
Thanks for your help!
Da Bozz said:
Hi,
I hope I'm in the right section for this.
Since I updated to Android 4.3 (latest HellyBean build), my phone crashes after a few screen orientation changes.
Does anyone know what the reason for this strange behaviour could be?
Thanks for your help!
Click to expand...
Click to collapse
You did full wipe before flashing the rom?
If this happening again and again then flash the rom again to check
Thanks for your response!
Yes, I did a full wipe, but I will try flashing it again.
Could this probably relate to build.prop mods?
Edit: Seems like a broken design was the problem. Activating the stock one fixed it, at least until now.
Q&A for [DEV][ROM] - Pantech Burst - CM-11.0 portinghttp://forum.xda-developers.com/android/development/dev-pantech-burst-cm11-0-porting-t2938360http://forum.xda-developers.com/android/development/dev-pantech-burst-cm11-0-porting-t2938360
Please use this thread to all questions not related with develop.
Greetings.
I didn't want to spam this thread with a useless "thank you" post but it's pretty quiet around here anyway so what the hey. THANK YOU SO MUCH!!! This is seriously freaking awesome. I was convinced development for the Burst was going to die with that final build of SlimBean. It feels so nice to be running KitKat (way to go, 4.4.4!) on this tiny little guy who refuses to die. That bug with the test build where opening SnapChat caused a kernel panic seems to be completely gone, so thanks for taking away my excuse for ignoring my SnapChat account lol. The battery life leaves much to be desired but I'm pretty sure that's the phone and not the ROM. Thank you so much again, this is excellent work :highfive:
thisisapoorusernamechoice said:
The battery life leaves much to be desired but I'm pretty sure that's the phone and not the ROM.
Click to expand...
Click to collapse
We must not forget that the device has a battery of 1600mA, for this reason it is normal that the the device have a short battery life.
There is always the possibility of purchasing an extra battery with external charger.
Greetings.
You're right of course and this is a great rom. I apologize if it came off like I was complaining or criticizing, this is great work and I'm utterly grateful to have cm11 on my old Burst.
Thank you mifl for cm11.
First of all thanks to all devs for cm11.
I am loving it by far.
Now on topic. I have two questions-
1). Is there any app that can control vibration intensity of phone, nothing from playstore works.?
DU rom from marduk have it inbuilt and works flawlessly but rom has bugs of wifi tethering, Bluetooth and random restart. I rely on tethering heavily so i am on cm11. Is there anyway i could get it on cm11?
2). Anyone facing any random restarts.?? I faced some random restarts recently when using multiple tabs of UCbrowser. Though i wasnt able to catch anything from log. I will post if it happens next time.
3). It is taking too much time to charge if handset is kept on usage.?? Well mine does. But charger is of samsung (.7A)..
Thanks for sharing this great Rom.
God bless you.
Thanks.
herecomesmaggi said:
First of all thanks for cm11. I am loving it by far.
Now on topic. I have two questions-
1). Is there any app that can control vibration intensity of phone, nothing from playstore works.? DU rom from marduk have it inbuilt and works flawlessly but rom has bugs of wifi tethering, Bluetooth and random restart. Is there anyway i could get it on cm11 of mifl.?
2). Anyone facing any random restarts.?? I faced some random restarts recently when using multiple tabs of UCbrowser. Though i wasnt able to catch anything from log. I will post if it happens next time.
3). It is taking too much time to charge if handset is kept on usage.?? Well mine does. But charger is of samsung (.7A)..
Thanks for sharing this great Rom.
God bless you.
Thanks.
Click to expand...
Click to collapse
First the rom is not my property. It is compiled from PantechDevTeam repositories.
If you want to get the DU version, you must wait to be released this compilation or you compile DU from marduk191 repositories.
Of the mistakes you've written would be important you will provide a log, to study errors.
Greetings.
Find a 1.0 A charger, it still won't be ideal but I think you'll notice improvement
Thank you for replying. I tried using Asus zenphone 5 charger of 1.25A it worked great.
Glad I could help. If I remember correctly it was your comments on the old CM 10 thread that originally led me to Slim Bean, which was a great improvement back on jelly bean. So thank you too lol
I have found a way to lower the intensity of vibration feedback of buttons..
You will need to decompile framework-res.apk and have to look for values. Xml in res folder some where at last there will be line <integer-array name="config_keyboardTapVibePattern"> Just change its value to suitable. Recompile and flash. Btw i am using value "2" instead of 40.
Thanks.
If u need a proper guide ping me...
whatsapp camera : black screen
i am using cm11 latest build. when ever i open camera in whatsapp application i see black screen.. but if i click the snap is taken.. same with bar code scanner app as well.. tried to check the log but there is no error registered for this.. i thing i have missed some setting..
Issues Installing Custom Firmware
First of all, thanks for all your work on Burst development. Here's my issue. I installed ICS from the Pantech website and then rooted my phone a year or two ago with "The Burst Hack Tools" mentioned in the instructions. I found the instructions to install custom firmware and tried installing CM11. Everything seemed to be going fine until I restarted my phone. I upgraded CWM to 6.0.2.7 touch version and retried. Same result. The third time I thought I may have forgot to wipe the cache so I was sure to do that. Same result. Question: Do I need to do a clean install of stock 4.0.4 Ice Cream Sandwich before intalling CM11? Thanks for your help.
---------- Post added at 06:41 PM ---------- Previous post was at 06:36 PM ----------
mifl said:
We must not forget that the device has a battery of 1600mA, for this reason it is normal that the the device have a short battery life.
There is always the possibility of purchasing an extra battery with external charger.
Greetings.
Click to expand...
Click to collapse
I've had good luck with this battery: Onite 1800mAh Battery for Pantech Burst P9070. Found on Amazon. I do notice the 200 mAh difference.
SparkyMcfly said:
First of all, thanks for all your work on Burst development. Here's my issue. I installed ICS from the Pantech website and then rooted my phone a year or two ago with "The Burst Hack Tools" mentioned in the instructions. I found the instructions to install custom firmware and tried installing CM11. Everything seemed to be going fine until I restarted my phone. I upgraded CWM to 6.0.2.7 touch version and retried. Same result. The third time I thought I may have forgot to wipe the cache so I was sure to do that. Same result. Question: Do I need to do a clean install of stock 4.0.4 Ice Cream Sandwich before intalling CM11? Thanks for your help.
Click to expand...
Click to collapse
Please see PDT Wiki page to install a new recovery to cm-11.0. After make this you must follow the Guide to Installing Custom Firmware in Pantech Burst Wiki Page.
Greetings.
mifl said:
Please see PDT Wiki page to install a new recovery to cm-11.0. After make this you must follow the Guide to Installing Custom Firmware in Pantech Burst Wiki Page.
Greetings.
Click to expand...
Click to collapse
Thanks for the directions. I flashed the latest version of CWM and reinstalled CM11. It has been working great. The only issue I've noticed is that if I turn off the phone and turn it back on, apps that have been moved to the external SD card "disappear". They are still there, I just have to add the icons back. From what I've read, this is a problem with Android? Any suggestions on how to fix it?
SparkyMcfly said:
Thanks for the directions. I flashed the latest version of CWM and reinstalled CM11. It has been working great. The only issue I've noticed is that if I turn off the phone and turn it back on, apps that have been moved to the external SD card "disappear". They are still there, I just have to add the icons back. From what I've read, this is a problem with Android? Any suggestions on how to fix it?
Click to expand...
Click to collapse
I have no answer to this, but I would also like to know if there is a work around or fix to this
SparkyMcfly said:
Thanks for the directions. I flashed the latest version of CWM and reinstalled CM11. It has been working great. The only issue I've noticed is that if I turn off the phone and turn it back on, apps that have been moved to the external SD card "disappear". They are still there, I just have to add the icons back. From what I've read, this is a problem with Android? Any suggestions on how to fix it?
Click to expand...
Click to collapse
This is a known bug in the code of Android 4.4. I think this can be solved with Xposed Module:
* http://www.xda-developers.com/fix-external-storage-handling-with-xposed-module/
Greetings.
Help with Xposed
mifl said:
This is a known bug in the code of Android 4.4. I think this can be solved with Xposed Module:
* http://www.xda-developers.com/fix-external-storage-handling-with-xposed-module/
Greetings.
Click to expand...
Click to collapse
So I installed Exposed from here: http://dl-xda.xposed.info/modules/de.robv.android.xposed.installer_v33_36570c.apk
Then I installed HandleExternalStorage from the Play store: Play Store: http://tinyurl.com/nnajr7f
I went into Exposed and enabled HandleExternalStorage. Then rebooted. Icons dissapeared.
I uninstalled a couple of apps that were on the SD and reinstalled. Rebooted. Still missing
Icons. Any help would be greatly appreciated. Thanks.
Volume wake
Please excuse my ignorance but how can one set wake on volume keys? Its a small detail that is driving me crazy.
Gapps for Cm11 pantech burst
Is there another link to Gapps for cm11 on pantech burst? the link at github si giving a 404 error. plzzz help
First I would love to say thanks to everyone who helped put this ROM together :good:
Second, I'm having a problem with my storage. When I go to apps, my internal storage and external SD storage got mixed up, now I can't download entering from the play store. Please help!!