I've done the HSPL and roms before and i had to get my titan replaced and can't seem to do it again. Is it my setup?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cloudsdabomb said:
I've done the HSPL and roms before and i had to get my titan replaced and can't seem to do it again. Is it my setup?
View attachment 1380830
Click to expand...
Click to collapse
you need 2 females to 1 male, typically when you get a y cable it has 2 males and 1 female. You can get a gender changer and convert 1 male to a female.
someeh said:
you need 2 females to 1 male, typically when you get a y cable it has 2 males and 1 female. You can get a gender changer and convert 1 male to a female.
Click to expand...
Click to collapse
Yeah thanks genius. Did you happen to notice the picture?
---------- Post added at 11:25 PM ---------- Previous post was at 11:23 PM ----------
Cloudsdabomb said:
I've done the HSPL and roms before and i had to get my titan replaced and can't seem to do it again. Is it my setup?
View attachment 1380830
Click to expand...
Click to collapse
As it has been explained, by me and by others, numerous times throughout the HSPL thread, the ATT Titan is finicky with USB drives. Try every USB storage device you have in your house, and if none of them work, I linked the amazon page to one that does work, in the HSPL thread.
switch Goldcard with USB cable aka your device should not power on automatically when plugged in.
Link I know this one works because i've used it before. And okay shadow ill try. Thanks for the responses too
Edit. Tried to switch them around and everything but the Phone never goes to loading screen. I'm first trying to get the Euro rom and then the Spl correct?
link68759 said:
Yeah thanks genius. Did you happen to notice the picture?
---------- Post added at 11:25 PM ---------- Previous post was at 11:23 PM ----------
As it has been explained, by me and by others, numerous times throughout the HSPL thread, the ATT Titan is finicky with USB drives. Try every USB storage device you have in your house, and if none of them work, I linked the amazon page to one that does work, in the HSPL thread.
Click to expand...
Click to collapse
What are you using? SD reader or USB drive?
someeh said:
What are you using? SD reader or USB drive?
Click to expand...
Click to collapse
I've tried both I've done it once with the SD card reader and it worked but it's not working now T_T
Looking at the picture I suppose that usb-cable is from an external HD or DVD for a laptop. In this case you should connect the short lead which is power only to wall charger and use the other leads for the SD reader and phone. Don't use a multi-card reader because that won't work.
malvo26 said:
Looking at the picture I suppose that usb-cable is from an external HD or DVD for a laptop. In this case you should connect the short lead which is power only to wall charger and use the other leads for the SD reader and phone. Don't use a multi-card reader because that won't work.
Click to expand...
Click to collapse
I bought the y cable, gender changer and sd card online. So I dont understand what you're saying. Which short one? The one both chords converge into? And to make the gold card I format to FAT32 quick format then do goldcard image and then put on ETERIMG.nbh correct?
Cloudsdabomb said:
I bought the y cable, gender changer and sd card online. So I dont understand what you're saying. Which short one? The one both chords converge into? And to make the gold card I format to FAT32 quick format then do goldcard image and then put on ETERIMG.nbh correct?
Click to expand...
Click to collapse
Switch the wall charger with the sd card reader. Take as look at your own picture. The short lead or wire has gender changer and a pendrive. Format the sd card with FAT32, then do the gold card and last put the ETERIMG.nhb on the sd card.
malvo26 said:
Switch the wall charger with the sd card reader. Take as look at your own picture. The short lead or wire has gender changer and a pendrive. Format the sd card with FAT32, then do the gold card and last put the ETERIMG.nhb on the sd card.
Click to expand...
Click to collapse
okay so the Titan came fully updated with SPL 1.1 radio 16.23.01.26_A is that why it's not working?
Cloudsdabomb said:
okay so the Titan came fully updated with SPL 1.1 radio 16.23.01.26_A is that why it's not working?
Click to expand...
Click to collapse
It seems you have the Cingular rom. Is your phone AT&T branded, is it unlocked?
malvo26 said:
It seems you have the Cingular rom. Is your phone AT&T branded, is it unlocked?
Click to expand...
Click to collapse
it is AT&T branded I dont think it's unlocked. I haven't done anything to it since I recieved it in the mail.
Cloudsdabomb said:
it is AT&T branded I dont think it's unlocked. I haven't done anything to it since I recieved it in the mail.
Click to expand...
Click to collapse
If it is locked then it is a bit complicated. Are you using a SIM-card from AT&T? or any other provider? If you're on AT&T try to get a unlock code, or search how to unlock. Then download the EURO-rom, install with gold card and then follow the instructions at this link
http://forum.xda-developers.com/showthread.php?t=1744253
After that you can flash the custom rom of your choice. Good luck.
malvo26 said:
If it is locked then it is a bit complicated. Are you using a SIM-card from AT&T? or any other provider? If you're on AT&T try to get a unlock code, or search how to unlock. Then download the EURO-rom, install with gold card and then follow the instructions at this link
http://forum.xda-developers.com/showthread.php?t=1744253
After that you can flash the custom rom of your choice. Good luck.
Click to expand...
Click to collapse
My other Titan didn't need to be unlocked why this one?
Cloudsdabomb said:
My other Titan didn't need to be unlocked why this one?
Click to expand...
Click to collapse
It probably already was factory unlocked. Did you get the phone from AT&T on a contract? Or did you buy it from someone? Only you can answer those questions.
malvo26 said:
It probably already was factory unlocked. Did you get the phone from AT&T on a contract? Or did you buy it from someone? Only you can answer those questions.
Click to expand...
Click to collapse
from at&t on a contract..
Cloudsdabomb said:
from at&t on a contract..
Click to expand...
Click to collapse
That's why it's locked to AT&T. Try to get the unlock code from them or search the web how to do so. That's the only way to get things working.
malvo26 said:
That's why it's locked to AT&T. Try to get the unlock code from them or search the web how to do so. That's the only way to get things working.
Click to expand...
Click to collapse
No i mean my previous phone. I've had the TITAN replaced twice. I bought the first from AT&T off of the contract. Had it replaced. Did goldcard right out of the box. then had to get that one replaced. So now I have this and it's not reading the gold card. I've never had an unlocked htc TITAN.
Well, I don't know if your phone is locked or not. Then just follow the instructions at the link I posted before.
Related
These are the instructions I spent many hours looking for. Also, I know most people know, but just in case... Loading a ROM does wipe your device. Make sure you have all your info synced or backed up someplace.
- Doc
First, I Followed andykwg's instructions to the letter:
(here is his Post,but in case you dont want to go there, here are the instructions)
ANDYKWG:
Thanks POF, my 8525 is unlocked, but I have gone through hell with Vista so just to let you all know that "don't try these upgrades on VISTA".
I have read many posts and finally got it to unlock. In any case, here is what I did (on a XP box with activeSYNC 4.2 - it is running all the time for each of the steps below):
1) on XP, connect the phone to XP and make sure ActiveSync see the phone. Run the exe in 1.30 ROM for Cingular to download the SPL to 1.04. After this the phone will reboot/restart itself.
2a) On XP, with ActiveSync running and connected, run POF's MaUpgradeUt_noID.exe within the unlocker v2a xip file to upgrade the radio to version 1.16. If it fails with ERROR 114, go to step (3); else go to step (2b).
2b) If the first time failed, DON'T TOUCH THE PHONE. Run the exe again and the second time should run fine. There is a 114 error at the end and it is OK. Once you get the 114 error, soft-reset the phone before next step.
3) On the phone, flash with POF's unlocker (v2a) ON THE PHONE MEMORY HERM_Unlock_v2a.exe (in the zip file same as above download for unlock v2a). There is a success notice at the end.
That is it. Hope this help someone.
Andy
DocHoliday:
Now, what Andy Doesn't say here, and people have asked, is Yes, you are now unlocked and SuperCID.
Ok, I went a step further.
I loaded the South African 1.35 ROM. Why? Faster and about 15% more battery life to boot! There are a few things to consider before you go to SA 1.35. Your boot loader will now be SPL-1.09. Make sure your device is unlocked before you go to this ROM! If it is unlocked and SuperCID, it will remain unlocked and SuperCID after the ROM Update. If you installed the update before unlocking, I think you are out of luck. I have seen some threads that say you can change back to SPL-1.04, but nothing conclusive.
3 things you will notice after you load this ROM and how to fix them:
1. Keyboard Special Characters are out of Sync with the Keyboard (-, _, ;, :, etc...)
Most people said a registry entry fixed theirs, it did not for me. Here is what worked. Download this Extended ROM. Copy ShortString_Keypad_XML.CAB to your SD, then run it. Softboot, then Keyboard Special Characters are fixed!
2. Keyboard BackLight:
Disable the light sensor! With the SA ROM, the light sensor is too sensitive and doesnt work properly.To disable: Settings (on the 8525), Buttons, Backlight tab - Clear The Checkmark! Keyboard backlight now works when you press any key.
3. May not be a problem for some, but Phone skin is God Awful Lime Green! Yuck! (my opinion...)
Fix Phone Skin an download the skin of your choice...
Anyway, Hope this Helps someone. Took me a while to research and I wish I had my post when I first started. Many thanks to POF and the other contributors to XDA without which we would be limited to the ROM's the Carriers stuck us with! Good Luck all!
great
Thanks!!!! I want the perfect 8525 rom/radio/ext rom. Trying to decide what radio to include.
sucess with cingular 8525 1.34.502.1
thanks d0ch0liday..i loaded a t-mobile sim and started working right away.
Glad you guys got some use out of it.
It may be buried somewhere in the instructions, but definitely make sure you have a solid USB connection to your computer. Definitely DO NOT try an upgrade going through a USB hub!
Also make sure your battery is well charged... ;-)
Excellent advice, thanks...
some folks at ebay are selling Unlocked 8525s (like in this link), i am curious that if I buy one of these, will it be definitely SuperCID?
Hi there...long time no using a WM device and all the things with this CID and locked devices become a bit complicated to me...So I bought a M3100 unlocked with pof V2 and I have successfully upgraded my Radio version to 1.27.00...but now I want to upgrade the ROM too...I assume that my device is CID unlocked as I was able to upgrade the radio only...but a strange thing...I have no extended ROM on it...so can I upgrade my current rom with the SA 1.35 rom without problems...?
Regards and sorry for the noob question
Primoz
X_Farhad said:
some folks at ebay are selling Unlocked 8525s (like in this link), i am curious that if I buy one of these, will it be definitely SuperCID?
Click to expand...
Click to collapse
Probably not SuperCID. These look like they may have been obtained directly from HTC or they may be test units. They say new, but you new means never opened. It doesnt tell you how long they have been on the shelf. Since they are HTC, even if they were test units you would probably be ok. Anyway, you would probably still have to do POF's unlock to get it to SuperCID. Hope this helps...
Pc78 said:
Hi there...long time no using a WM device and all the things with this CID and locked devices become a bit complicated to me...So I bought a M3100 unlocked with pof V2 and I have successfully upgraded my Radio version to 1.27.00...but now I want to upgrade the ROM too...I assume that my device is CID unlocked as I was able to upgrade the radio only...but a strange thing...I have no extended ROM on it...so can I upgrade my current rom with the SA 1.35 rom without problems...?
Regards and sorry for the noob question
Primoz
Click to expand...
Click to collapse
You should be able to load any ROM you wish once you load POF's unlock. SuperCID and SIM Unlock stay with it...
d0ch0liday said:
Probably not SuperCID. These look like they may have been obtained directly from HTC or they may be test units. They say new, but you new means never opened. It doesnt tell you how long they have been on the shelf. Since they are HTC, even if they were test units you would probably be ok. Anyway, you would probably still have to do POF's unlock to get it to SuperCID. Hope this helps...
Click to expand...
Click to collapse
thanks for the reply d0ch0liday!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i really don't think they are test units..any way, do you think it's a good idea to buy one of these? they're like 200 bucks cheaper than tytn... btw, can I update them later on through Cingular's website? and is it possible for my device to become Locked on some carrier again if i flash it with the wrong Rom?
X_Farhad said:
can I update them later on through Cingular's website?
Click to expand...
Click to collapse
Yes if they are SuperCID or have a cingular CID (CWS__001).
X_Farhad said:
is it possible for my device to become Locked on some carrier again if i flash it with the wrong Rom?
Click to expand...
Click to collapse
Definitely not SIM locked. If it is not SuperCID and you plan to switch ROMs from different carriers, then make sure you CID unlock it prior to do any upgrade.
thank you pof!
just one more thing, have they ever shipped 8525 with bootloader 1.09? if they do, is it possible in any way to flash a rom from another carrier after CID Unlocking it?
X_Farhad said:
have they ever shipped 8525 with bootloader 1.09?
Click to expand...
Click to collapse
Not yet AFAIK.
X_Farhad said:
if they do, is it possible in any way to flash a rom from another carrier after CID Unlocking it?
Click to expand...
Click to collapse
yes.
d0ch0liday said:
2. Keyboard BackLight:
Disable the light sensor! With the SA ROM, the light sensor is too sensitive and doesnt work properly.To disable: Settings (on the 8525), Buttons, Backlight tab - Clear The Checkmark! Keyboard backlight now works when you press any key.
Click to expand...
Click to collapse
First this is an excellent Primer for those of us with Cingular phones ( or people like me who have one on order and want to be ready to tinker )
Has anyone found a reason that the SA ROM causes the light sensor issue?
Also is there a way to bring the phone back to virgin/stock if the need were to arrise (as in the phone died)?
quick question from 8525 users: what is the input voltage range for 8525's travel charger? is it 110-220 or just 110?
rgreenpc said:
First this is an excellent Primer for those of us with Cingular phones ( or people like me who have one on order and want to be ready to tinker )
Has anyone found a reason that the SA ROM causes the light sensor issue?
Also is there a way to bring the phone back to virgin/stock if the need were to arrise (as in the phone died)?
Click to expand...
Click to collapse
Not sure why the light sensor happens. I also noticed it happened with the 1.30 ROM as well. This is the ROM you load to downgrade to the 1.04 bootloader. I didnt really like the sensor anyway as it definately did not do well in ambient light. As far as getting it back to Cingular stock, just load the latest Cingular ROM 1.34 and it should be close enough. Thanks for the compliment. I wrote this just for that purpose. I spent quite a while looking for all the answers, I learned alot, which is i think POF's and the others intent. But it was very consuming and wanted to save others the uncertainty of not following in someone's footsteps. Again, thanks.
X_Farhad said:
quick question from 8525 users: what is the input voltage range for 8525's travel charger? is it 110-220 or just 110?
Click to expand...
Click to collapse
Mine says 100-240 volts and has a travel adapter for Europe.
d0ch0liday said:
Mine says 100-240 volts and has a travel adapter for Europe.
Click to expand...
Click to collapse
Also it is a standard mini-usb connector so any PC will do (or powered usb Hub)
d0ch0liday said:
Mine says 100-240 volts and has a travel adapter for Europe.
Click to expand...
Click to collapse
thanks
this is my first post and as you'll learn quickly i'm a total newbie. I'm such a newbie that you'll find a picture of me on the dictionary entry of noob. anyway, on to my problem.
About a month ago i purchased a HTC Hermes, more specifically AT&T 8525. My cell phone provider is T-Mobile. I googled AT&T 8525 unlocker and sure thing found this great unlocker. Free HTC Hermes SIM & CID Unlocker *New* version v3a. Needless to say the unlocking worked perfectly. My phone ran Windows Mobile 6.0 Pro.
Fast forward about three and a half weeks ago and my friend got the same phone off ebay. He has T-Mobile too and I told him i would unlock it for him since mine worked flawlessly. Well, his phone runs on Windows Mobile 5.0 Pro. I started the update process on the computer and here's what the screens looked like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My phone did not ask me to press yes. Then i checked the boxes on the setup and was ready to continue
After pressing next it showed this
The progress bar remained at zero then this screen came up
http://i78.photobucket.com/albums/j120/mnn2k/phone/Untitled8.jpg
I have tried over and over again and get the same error. I have tried using different USB ports, USB cables, and two computers, both running vista but i have had no luck. now the phone is be in the tri-color mode and it won't do anything. All the screen says is
HERM100
IPL-1.01
HERM100
SPL-1.40.Olipro
If i can't fix it i guess i will have to give my friend my phone and will lose a lot of money. Any help is appreciated. I tried doing a search and all the posts can't help me since i don't know much at all when it comes to phones.
Flash it with a stock rom from the wiki (for the country and provider the hermes is from)
and do it from an xp computer
Johnston411 said:
Flash it with a stock rom from the wiki (for the country and provider the hermes is from)
and do it from an xp computer
Click to expand...
Click to collapse
its a United States AT&T 8525. i tried flashing it with the Official HTC WM6 ROM from this link http://forum.xda-developers.com/showthread.php?t=316726 but now the progress bar goes to 11 then it gives me the same error. I'll have to try it on from a XP. on the Readme it says there might me a problem with ports. How do i check if there is a problem with that.
If i were you i would flash hard-spl v7 before you flash another rom.
http://forum.xda-developers.com/showthread.php?t=296722
If you are on vista make sure you download the latest version of wmdc from microsoft.
Then flash the most recent at&t rom from here
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
If this still doesn't work use an xp machine. If you can't use an xp machine there is a guide that explains how to swap the wmdc drivers for active sync ones.
http://www.anichillus.net/index.php?topic=21.0
why does everyone seem to point the main cause of problems to vista?
I have vista installed and i dont have any problem flashing with WMDC (latest version installed) and have updated vista with sp1 , i did used to have problems sync'ing the phone before i installed sp1 but afterwards i have had no problems and flashed a number of phones for people who had experienced the same thing as MNNK.
Anyway enough of my moaning. Basically i would flash an original rom. then try flashing hardspl . If the HTC one wont work try the network rom,that it was originally on, T-Mobile.
http://member.htc.com/downloadfiles/RomCode/TMobile/Hermes_WM6_TMUK_3.60.110.4.zip
THATS THE ONLY LINK I HAVE FOR T-MOBILE yeah i know its the uk one but might be handy for someone from the uk browsing this page because of the same problem
Or that at&t rom that johnston411 said
Johnston411 said:
If i were you i would flash hard-spl v7 before you flash another rom.
http://forum.xda-developers.com/showthread.php?t=296722
If you are on vista make sure you download the latest version of wmdc from microsoft.
Then flash the most recent at&t rom from here
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
If this still doesn't work use an xp machine. If you can't use an xp machine there is a guide that explains how to swap the wmdc drivers for active sync ones.
http://www.anichillus.net/index.php?topic=21.0
Click to expand...
Click to collapse
thanks for the help, i played around and finally found a ROM that installed, Schaps 4.31 WWE.
scousemartin said:
why does everyone seem to point the main cause of problems to vista?
I have vista installed and i dont have any problem flashing with WMDC (latest version installed) and have updated vista with sp1 , i did used to have problems sync'ing the phone before i installed sp1 but afterwards i have had no problems and flashed a number of phones for people who had experienced the same thing as MNNK.
Anyway enough of my moaning. Basically i would flash an original rom. then try flashing hardspl . If the HTC one wont work try the network rom,that it was originally on, T-Mobile.
http://member.htc.com/downloadfiles/...3.60.110.4.zip
THATS THE ONLY LINK I HAVE FOR T-MOBILE yeah i know its the uk one but might be handy for someone from the uk browsing this page because of the same problem
Or that at&t rom that johnston411 said
Click to expand...
Click to collapse
i found Schaps ROM and that worked. thanks for all the help. In your opinion which is the best cooked ROM.
Now you opened a can of worms.... Everyone thinks something else is best, & it is for them..... A rom is a personal choice so asking whats best is like your girlfriend asking if you think shes fat, THERE IS NO RIGHT ANSWER.....
Seriously though, do some research on the Hermes Mobile 6 part of the forum as I believe someones started an updated list of current roms.
Cheers.....
ultramag69 said:
Now you opened a can of worms.... Everyone thinks something else is best, & it is for them..... A rom is a personal choice so asking whats best is like your girlfriend asking if you think shes fat, THERE IS NO RIGHT ANSWER.....
Seriously though, do some research on the Hermes Mobile 6 part of the forum as I believe someones started an updated list of current roms.
Cheers.....
Click to expand...
Click to collapse
Okay, i'll stay away from that. but i still can't flash HardSPL on my phone. it gives me error 260.
1) i uncheck the allow USB connections on WMDC
2). i run the SPL-HERMES.exe on my phone and connect to usb.
3). run ruu_wrapper.exe
I also read the guide here http://www.mrvanx.org/hermes_guide/hardspl and nothing.
Then i tried using the Unlocker but that gives me the same error 260. i have tried the SD card method but mine is a 4gb microSDHC. my phone recognizes the card and i renamed the .nbh file. So i launch spl-herm.exe and nothing happens. i do hit the power button. still nothing.
When running SSPL-HERM.exe it says i have SPL-1.09.ds. when i do a manual bootload it says i have SPL-1.40.Olipro
what did you rename the image as when you placed it onto the sd card?
I know a lot of people have renamed the file incorrectly?
Also, I know people who SWEAR they formated fat32 but when I did it again using the same card freshly formatted it worked.
Cheers...
scousemartin said:
what did you rename the image as when you placed it onto the sd card?
I know a lot of people have renamed the file incorrectly?
Click to expand...
Click to collapse
renamed from HermesUnlocker_v3a.nbh to HERMIMG.nbh
ultramag said:
Also, I know people who SWEAR they formated fat32 but when I did it again using the same card freshly formatted it worked.
Cheers...
Click to expand...
Click to collapse
i did format it with fat32, quick format and normal format, default allocation size and 4096 bytes. i know i said i am a newbie when it comes to phones but i'm not one when it comes to computers. i would rather have Hard-SPL flashing first though, and also i have no Radio ROM currently on the phone.
The fact you have no radio is probably your BIGGEST problem.The no GSM error is what makes most bricks. Up til now there is no reliable surefire fix.
Looks like you have a PDA on your hands but no phone functionality. You can load an os only rom - generally they are the cooked roms, but you have more chance of jumping off a cliff and instantly growing usable wings than fixing this in a hurry...
Sorry to be the bearer of bad news. but thats why the unlocker won't flash on, it replaces the radio rom to something that allows the sim/cid to be unlocked.
You should still be able to flash Hard SPL on but don't pick any roms with the radio cooked in as they WON'T flash.
Cheers...
ultramag69 said:
The fact you have no radio is probably your BIGGEST problem.The no GSM error is what makes most bricks. Up til now there is no reliable surefire fix.
Looks like you have a PDA on your hands but no phone functionality. You can load an os only rom - generally they are the cooked roms, but you have more chance of jumping off a cliff and instantly growing usable wings than fixing this in a hurry...
Sorry to be the bearer of bad news. but thats why the unlocker won't flash on, it replaces the radio rom to something that allows the sim/cid to be unlocked.
You should still be able to flash Hard SPL on but don't pick any roms with the radio cooked in as they WON'T flash.
Cheers...
Click to expand...
Click to collapse
yeah i kinda thought that was the case. Since the unlocker replaces the Radio ROM, but the frustrating thing is that the HardSPL isn't flashing. Stupid VISTA. Let's say i am able to flash HardSPL. can't i flash a Radio ROM only? or the original ROM found on the wiki.
Maybe, people somteime can recover their radio roms flashing a radio only rom or the original shipped rom, BUT, if this doesn't work then there seems little hope of you actually fixing this problem.There are quite a few threads with numerous "I got it working" posts but then those same people are back the next day bemoaning the fact that it didn't work. If by some miracle you do get it working, make sure you post what happened and how you fixed it but wait a day or two to check it really is fixed or just faking you out.
Good luck, I think you're gonna need it....
And don't get me started on Vista
Cheers...
ultramag69 said:
Maybe, people somteime can recover their radio roms flashing a radio only rom or the original shipped rom, BUT, if this doesn't work then there seems little hope of you actually fixing this problem.There are quite a few threads with numerous "I got it working" posts but then those same people are back the next day bemoaning the fact that it didn't work. If by some miracle you do get it working, make sure you post what happened and how you fixed it but wait a day or two to check it really is fixed or just faking you out.
Good luck, I think you're gonna need it....
And don't get me started on Vista
Cheers...
Click to expand...
Click to collapse
WOW, first try on XP and HardSPL flashed like that (snap).
well friends I hace a htc mogul of sprint I take the TitanUnlocker and apply it, later I put one of the Multi-Carrier (Heavy) Titan Roms but the mogul star to reset continusly then I put a Multi-Carrier (Light) Titan Rom but it was the same with the continus reset, then I use "Titan_Relocker" and look for a original rom and find "_HTC Mogul (Sprint)_RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship" I put this but send me ERROR 290, later I come back and flash with Multi-Carrier (Light) Titan Rom again and finish to install, reset and send me the logo screen of HTC and the mensagge NO RADIO and windows non start.
I know that my English is not good but i want to fit my mogul, can some one help me please?
omegafunky said:
well friends I hace a htc mogul of sprint I take the TitanUnlocker and apply it, later I put one of the Multi-Carrier (Heavy) Titan Roms but the mogul star to reset continusly then I put a Multi-Carrier (Light) Titan Rom but it was the same with the continus reset, then I use "Titan_Relocker" and look for a original rom and find "_HTC Mogul (Sprint)_RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship" I put this but send me ERROR 290, later I come back and flash with Multi-Carrier (Light) Titan Rom again and finish to install, reset and send me the logo screen of HTC and the mensagge NO RADIO and windows non start.
I know that my English is not good but i want to fit my mogul, can some one help me please?
Click to expand...
Click to collapse
If I were you I would use the Titan relocker to default to your stock bootloader. Then install the Stock Sprint ROM from my HTC unlock tools directory. Now after that is done reinstall the olipro 2.40 bootloader. You need to be booted up to a functioning WM OS. Make sure memory card is removed and follow this. Run the Olipro 2.40 unlocked Bootloader and follow its instructions until it comes up saying you must unplug and plug the phone back in. PLEASE dont miss that, DO NOT hit a key to continue UNTIL you have UNPLUGGED the phone waited a moment, then plugged it back in. Then you can hit a key and continue but PAUSE again and minimize that window. Now right click the Active sync icon on your PC's taskbar. Pick connection settings and then look for the Box with Allow USB connections. Clear the box (disable) the usb connections. Then click OK. Now open the window back up and click to continue. That will exit the Bootloader and reset the phone.
Now you can flash A GPS RADIO 3.35.04, 3.42.40, OR 3.42.50 AND THEN A CUSTOM ROM using an RUU or by using the MicroSD method. Hope this helps. But your problems sound like a bad flash.
PS: If you jumped into custom ROM flashing not knowing what you are doing. That is on you.. This thread should not be in this subforum to begin with so if you still cant get up and running I will gladly have it moved.
Thanks RyanMogul6800
1.- can you post the Olipro 2.40 because I found one in this link (http://forum.xda-developers.com/showpost.php?p=1941281&postcount=6) but I dont know if is the correct version, I leave you a pics abouy my problem
2.- you say that I need to be running windows mobile to apply again the Olipro or it can be apply in radio mode?
This is when I instal the multicarrier light version
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This others is when I tray ti install a sprint ROM
Yea you screwed up pretty darned bad. Re-read my post in this thread. I added links and more info. Hope you get sorted out. I am pretty sure you will just be patient. The titan is a very tough device. Very hard to brick.
RyanMogul6800 said:
Yea you screwed up pretty darned bad. Re-read my post in this thread. I added links and more info. Hope you get sorted out. I am pretty sure you will just be patient. The titan is a very tough device. Very hard to brick.
Click to expand...
Click to collapse
Thanks Man Im going to follow the steps and try to fit my mogul, really thanks
omegafunky said:
Thanks Man Im going to follow the steps and try to fit my mogul, really thanks
Click to expand...
Click to collapse
No problem buddy, I am here to help. And your English is very good. I think by fit you mean fix, but I know what you mean.
Also I just released my Carrierless versions. Click my name and goto my homepage then look at the folders on the right of the 4shared page that comes up. Also if you want to try my 21054 6.1 builds they are also accessible by clicking on the "other share space" link. Versions 1.5 and 3.0, Zero G is another Carrierless version. Very light on resources. But Zero G is stripped bare. Meant for enthusiasts only.
1.5 is the same as 1.1 just a newer build. 3.0 is the same as 2.0 just a newer build.
well i do the step of apply the relocker and run the "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship" it start installing the OS but when it was in 11% chance the PDA screen to the 3 color bars and sent me a error menssage
I did something wrong?
omegafunky said:
well i do the step of apply the relocker and run the "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship" it start installing the OS but when it was in 11% chance the PDA screen to the 3 color bars and sent me a error menssage
I did something wrong?
Click to expand...
Click to collapse
Yea remove the memory card and only use a main usb port on your Computer (port built into the motherboard, not a hub)
Also I forgot to mention, after each bad flash use the Exitbl.exe to get out of bootloader. Then re-put it back in bootloader manually to try again. Use Winrar, or 7zip to extract the contents of olipro 2.40 into a folder to get the Exitbl.exe.
Also since you dont have a functioning Windows Mobile OS to use Synced Active Sync (green icon in taskbar) are you trying to flash the Stock Sprint ROM with Active Sync connections disabled in the PC's taskbar (icon should not be green, should have a little x over a white icon.
I noticed in your screenshots it doesnt look like you are using Windows XP..
If you are using Vista, or Windows 7 then I cant help you. Those are not recommended operating systems for phone flashing..
You might have to use a friends computer with Windows XP and install active sync 4.5 on it. etc..
Im usin windows xp, well i cant do that the "TitanRelocker" run very well, i have the mogul coneccted to the pc, and run the "TitanRelocker" I press a key and later send me this menssage, I choose yes a lot of times but always send me the same menssage in bootloader mode
omegafunky said:
well i do the step of apply the relocker and run the "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship" it start installing the OS but when it was in 11% chance the PDA screen to the 3 color bars and sent me a error menssage
I did something wrong?
Click to expand...
Click to collapse
You said before you already used the Titan Relocker you only have to relock it once.. So your new objective is to Exitbl.exe (exit bootloader) disable active sync connections and get the Stock Sprint ROM to flash. And then from a functioning windows mobile OS and active sync re-enabled flash the Unlocked olipro 2.40 bootloader, then GPS radio, then Custom ROM.
RyanMogul6800 said:
You said before you already used the Titan Relocker you only have to relock it once.. So your new objective is to Exitbl.exe (exit bootloader) disable active sync connections and . And then from a functioning windows mobile OS and active sync re-enabled flash the Unlocked olipro 2.40 bootloader, then GPS radio, then Custom ROM.
Click to expand...
Click to collapse
with "get the Stock Sprint ROM to flash" you reffer to "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship"? because I ejecute this with activesync disable and send me ERROR 260 CONNECTION
omegafunky said:
with "get the Stock Sprint ROM to flash" you reffer to "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship"? because I ejecute this with activesync disable and send me ERROR 260 CONNECTION
Click to expand...
Click to collapse
Ok im done.. I guarentee if I had the phone in my hands I could get it fixed in 15 minutes tops..
This large disclaimer is in the beginning of my ROM threads for a reason..
Make sure you know what you are doing before you attempt to flash a Custom ROM onto your device!!
I had the same issue with flashing my phone.
I could not for the life of me get a radio to flash using a usb connection.
I had to use the non-highspeed 2gig SD card to flash my radio and then my first ROM. Worked first time. No fooling with computers that are not compatible with the flashing process.
use the search function, you will find the instructions....
cheers.......
and wow Ryan - you are extremely nice to have helped him along this far. You need to make a clear trouble shooting wiki page, and then point people in that direction.
omegafunky said:
with "get the Stock Sprint ROM to flash" you reffer to "RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_ 4350H_SPCS_AM_Ship"? because I ejecute this with activesync disable and send me ERROR 260 CONNECTION.
Click to expand...
Click to collapse
Yea and another possibility is that you could of tried restarting your computer and trying again. Sometimes when you have a bad flash or errors the RUU utilities refuse to work until a reboot of the Computer.
anyone know where I can find the HTC Mogul Sprint ROM 2.16.651.0???
Ok I can fix you omega. But it requires more chatting than can be done in a thread. The sprint rom you want is here. ftp://up.ppcgeeks.com/Titan/Users/ImCoKeMaN/roms/Sprint_2.16_OS.nbh.
If you need more help pm me and I can enter the chat here http://forum.ppcgeeks.com/chat/flashchat.php and walk you through the steps to recover the phone. I won't abandon you like ryan did.
drewcam888 said:
Ok I can fix you omega. But it requires more chatting than can be done in a thread. The sprint rom you want is here. ftp://up.ppcgeeks.com/Titan/Users/ImCoKeMaN/roms/Sprint_2.16_OS.nbh.
If you need more help pm me and I can enter the chat here http://forum.ppcgeeks.com/chat/flashchat.php and walk you through the steps to recover the phone. I won't abandon you like ryan did.
Click to expand...
Click to collapse
I am the only one that tried to help this person from the moment he started this thread. If you didnt notice I tried everything under the sun. If this person does end up getting it, it will not be because of you. It will be because of what I taught him already finally getting through.
Drew, you do not help anyone. You put your in your two cents in lots of threads usually short answers that only mislead someone further. All someone has to do is click your name, and find all posts by this user and sit back read and say OMG what an idiot.
You have yet to make any contributions that help out any forum. You are just a bantering PITA. You say useless garbage to just up your post count.
I on the other hand, help people. I spend a lot of time on my ROMs and software. I dont use Navizon links to make money off of people like you try to do.
You think you are invincible or something buddy? Say one more thing about me and you will be repramanded or worse. Trust me on that..
Again I will state for you omegafunky. If you want step by step help pm and I can chat with you. I can help you fix your issues.
And wow Ryan thats an earful. And wow why the need to feel you have to threaten people.
I am sure that I am not the only one who has bought an Orange UK phone and wants to use in on another network. I'll get an unlock code to allow my T-Mobile SIM to work. But I want to unbrand the phone too so that I get rid completely of all the Orange branding and Orange software. What are my options?
1) simply flash with alternative branded ROM.
Inevitably this doesn't work and the RUU.exe program quickly indentifies the phone I am trying to flash has the Invalid Operator ID and will not flash it.
2) Goldcard.
I have a Windows 7 Phone Goldcard which I have created using an XTC Clip. I have copied the Europe.nbh ROM over to is and tried rename as OMEGIMG.nbh and RADAIMG.nbh. I've used a HD7 Unlock Kit Y-cable and put the Radar in USB Hostmode, but it has done nothing. (The same cable and SD card worked perfectly for my Mozart.)
3) Ansar's supplemented ROM method.
For other devices Ansar has supplement parts of the nbh file to twick the valid Operator ID check, I think using a "bin to d000ff builder". However, as I understand it, this won't work unless I have an RUU_Radar_Orange.exe file to start with.
Any other ideas?
Have been trying to flash .nbh file in Bootloader mode but stuck on 5% and bricked my phone and motherboard had to be replaced.
Have you considered flasing in USB mode using OTG cable?
Bought this one:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Could you send how to make goldcard for wp7?
Sorry to hear you have bricked your phone.
I've got a little further in that I have definitely established that the image for Goldcard needs to be OMEGIMG.NBH (not RADAIMG.IMG). (With Radaimg.nbh the device says image not found.) Once the phone is connected to the HD7 Unlock cable, in USB Host Mode, with OMEGIMG on the Goldcard it says Loading, then drops into "Bootloader" mode, but with neither Serial or USB displayed.
I've not heard of the OTG cable. How does that work?
For Goldcard I made mine using the XTC Clip (Mozart mode). You can do it a longer method using an Android or Windows Mobile 6.x device which includes an SD slot, or a laptop that has a "real" SD card reader (not connected over any USB bus).
OTG cable is a cable which allows you to connect usb stick/sdcard reader via USB
it definitely works with SGS2/Nokia
Oh yes, I've just looked up info on the "On-The-Go" USB cable. It seems that there is a subtle difference from standard USB so that the device (mobile phone) can act as a host. Will the OTG cable allow the Radar to power the SD Card reader? Is there any evidence of it working on any other HTC Phones?
I haven't tried that yet
Richard Fantom said:
I've got a little further in that I have definitely established that the image for Goldcard needs to be OMEGIMG.NBH (not RADAIMG.IMG). (With Radaimg.nbh the device says image not found.) Once the phone is connected to the HD7 Unlock cable, in USB Host Mode, with OMEGIMG on the Goldcard it says Loading, then drops into "Bootloader" mode, but with neither Serial or USB displayed.
Click to expand...
Click to collapse
I'm embarassed to say that trying again with the goldcard I have misled you. On either filename the device says Loading, then Image not Found before dropping into Bootloader mode. I had not watched carefully enough before.
But from this I conclude that the device is seeing the goldcard (as before the y-cable is connected it does nothing), but not finding the correct image.
Any suggestions what other filenames should be tried?
So far I have tried IMG.NBH, OMEGIMG.NBH, RADAIMG.NBH
Is there any other code for the Radar 4G ?
You might want to check on the HD7 forums or the hacking forums for WP7. I have never used the Gold Card method so I am not sure how it works. Is it just an nbh file deployed to the card or is the card specificly formatted and then the nbh extracted to the specially formatted card. As far as I know the xtc clip only supports the HD7 and does not support the Radar (yet?).
Hello everybody,
I've tried with 2 differents RUU and I have the same problem; it stuck at 5% and I have a windows with IU534 error "flash write error happen".
I've also extracted the content of the RUU and launched the Rom update utilty, same way...
My phone's always starting on the white screen (radio-16.23.02.09_2).
Any ideas ??
I think it's a bootloader blocking but I've not enough knoledge to unblock it.
PS : sorry for my bad english, I'm french
stef19100 said:
Hello everybody,
I've tried with 2 differents RUU and I have the same problem; it stuck at 5% and I have a windows with IU534 error "flash write error happen".
I've also extracted the content of the RUU and launched the Rom update utilty, same way...
My phone's always starting on the white screen (radio-16.23.02.09_2).
Any ideas ??
I think it's a bootloader blocking but I've not enough knoledge to unblock it.
PS : sorry for my bad english, I'm french
Click to expand...
Click to collapse
As I have warned before - your phone is bricked and as far as there weill be decent developers for Radar you cannot do anything but send phone to be repaired.
The bad is that I am waiting from 14th od November and no results (they have ordered motherboard from the supplier)
Thanks for your answer masi0, I hope you'll receive your phone soon !
Looks like it's an Orange problem (mine is Orange France), I'd like to know if any other members have succeeded in updating their phones !
stef19100 said:
Thanks for your answer masi0, I hope you'll receive your phone soon !
Looks like it's an Orange problem (mine is Orange France), I'd like to know if any other members have succeeded in updating their phones !
Click to expand...
Click to collapse
I don't think it's carrier problem - I think we are upgrading phones in a wrong way
I've tried with many differents RUU and I have the same problem; it stuck at 5% and I have a windows with IU534 error "flash write error happen".
can anybody help? radar sim-free, not brand. It problem with phone - not with brand
....t-mobile unbranding without problem by goldcard....
Wow, after a year of frustration whenever I have tried to unbrand my phone I have finally found the solution. I hope it helps others and of course it is a simple solution.
My mistake was that I made the goldcard and then copied the NBH file over to it (I'm sure that's what I did before with the Mozart and it worked). However, what worked for me was that first I formatted the MicroSD card (Fat32), then copied the NBH file over, renamed as OMEGIMG.NBH, then ran the GoldCard Tool as administrator. Once this was done, I put the phone into USB Host mode and connected the Y-cable. I left it alone for an hour whilst I did something else and returned to find the phone had been updated and debranded with the NBH file required.
have a htc titan
not sure where to begin...
i am happy with how it is - but when i try to tether - it says i have to call at&t (i dont want to do that and just want to tether with the data i had already paid for)
if i hold volumne up and down together and boot phone... i get this...
----
Security Unlocked
PI39***
SPL-1.8.160015.3(131788)
eMMC SAMSUNG 15028MB
TOUCH A1(F:81,ID:1,V11,B:F8)
Radio-16.23.02.09_2
Serial
APPSBL
IMAGE CRC
FACTORY RESET
-----
what does it mean? tried searching for this SPL with no avil...
slpin said:
have a htc titan
not sure where to begin...
i am happy with how it is - but when i try to tether - it says i have to call at&t (i dont want to do that and just want to tether with the data i had already paid for)
if i hold volumne up and down together and boot phone... i get this...
----
Security Unlocked
PI39***
SPL-1.8.160015.3(131788)
eMMC SAMSUNG 15028MB
TOUCH A1(F:81,ID:1,V11,B:F8)
Radio-16.23.02.09_2
Serial
APPSBL
IMAGE CRC
FACTORY RESET
-----
what does it mean? tried searching for this SPL with no avil...
Click to expand...
Click to collapse
Double check your SPL please?
PL is
SPL-1.8.160015.3(131788)
just checked again....
i cant seem to find any information on doing hspl on it since everytime i look up that spl, it shows up as radar but i have a titan?
that isnt really my main concern... mine is the fact that i cant even tether with this unlocked/unbranded htc phone..... it complains about AT&T tether plan...
then it complains about some conection error about phone cant connect to the internet when it is on zune and i cant use the zune pass
held volumn up and boot phone
have a red LED blinking but no display
connect to computer, says Qualcomm CDMA Tehcnologies MSM
does that mean anything?
slpin said:
PL is
SPL-1.8.160015.3(131788)
just checked again....
i cant seem to find any information on doing hspl on it since everytime i look up that spl, it shows up as radar but i have a titan?
that isnt really my main concern... mine is the fact that i cant even tether with this unlocked/unbranded htc phone..... it complains about AT&T tether plan...
then it complains about some conection error about phone cant connect to the internet when it is on zune and i cant use the zune pass
Click to expand...
Click to collapse
SPL1.86.160015.3...is your device the x310e?
---------- Post added at 07:20 AM ---------- Previous post was at 07:13 AM ----------
slpin said:
held volumn up and boot phone
have a red LED blinking but no display
connect to computer, says Qualcomm CDMA Tehcnologies MSM
does that mean anything?
Click to expand...
Click to collapse
To get into bootloader mode you must hold down both volume down and volume up simultaneously and while you're doing it, hit the power button until you see the white screen, continue to hold down volume up/volume down but let go of the power button.
here is the screen inside bootloader
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
here is the one inside about
slpin said:
here is the screen inside bootloader
here is the one inside about
Click to expand...
Click to collapse
Your device model number is the HTC Titan x310e. You will note all we folks with the AT&T HTC Titan in the United States have the "x310a". If you're overseas somewhere other than the US and Canada, I believe you're going to debrand your device with the Cingular 1.10 ROM where we are required to use the European 1.09 ROM but I'm going to be honest with you and all; I'm not sure. My interpretation of the original debrand post is to debrand your device with the opposite ROM depending on where you from and I have spent more time on the Titan threads in the last 6 weeks than I have since my Motorola z3 and HTC Rhodium days but I'm a math major and no where near the level of expertise of most here including this very thread. It is unknown if the Windows Phone 8 devices will be capable of being unlocked other than the carrier-subsidy unlock; the HTC Titan II to date can't be HSPL so it begs the question if the latter devices will equally be highly improbable. I think those of us who also own the HD2 hope the future HTC Titan III (Zenith) will be what many have achieved in our HD2s.
The bootloader is waaaaaaayyy too old. That's like the first walking days of the Titan, but your OS versions seems to have caught up. In this case, no debranding is necessary as all X310e model are unbranded, you just straight flash HSPL and do a custom rom, or you might even consider going stock, which football has provided, including the latest and official 8773 firmware with 4.6 bootloader.
There have been a couple of reports that WP8 crashes, tinkering/trying to unlock the bootloader, showing a PC-like error upon startup asking for a "recovery disk". The only way to fix this is via warranty.
NeuroXT said:
The bootloader is waaaaaaayyy too old. That's like the first walking days of the Titan, but your OS versions seems to have caught up. In this case, no debranding is necessary as all X310e model are unbranded, you just straight flash HSPL and do a custom rom, or you might even consider going stock, which football has provided, including the latest and official 8773 firmware with 4.6 bootloader.
There have been a couple of reports that WP8 crashes, tinkering/trying to unlock the bootloader, showing a PC-like error upon startup asking for a "recovery disk". The only way to fix this is via warranty.
Click to expand...
Click to collapse
I wondered whether if the device hardware began as an "x310e" if the debrand was necessary. Our "x310a" devices have to be debrand and made to mimic the "x310e" to successfully HSPL...but no one outside the US has been able to verify this. Over on another thread an individual asked my about his "x310e" and his OSPL is 1.86.160015.3 and I asked him to double check that for me and again he said the same thing. It's my understanding, he's good to go and simply has to flash both the SPL205 and HSPL and that's it.
berrywr said:
I wondered whether if the device hardware began as an "x310e" if the debrand was necessary. Our "x310a" devices have to be debrand and made to mimic the "x310e" to successfully HSPL...but no one outside the US has been able to verify this. Over on another thread an individual asked my about his "x310e" and his OSPL is 1.86.160015.3 and I asked him to double check that for me and again he said the same thing. It's my understanding, he's good to go and simply has to flash both the SPL205 and HSPL and that's it.
Click to expand...
Click to collapse
wow
you are right
no gold card, no nothing...
just flash it and it is all done now!
it is surprising that I need to do this on a unbranded/unlocked device.... the x310e 's tethering is *still* locked by AT&T.../
does the top left of my device saying "Security Unlocked" mean anything special?
slpin said:
wow
you are right
no gold card, no nothing...
just flash it and it is all done now!
it is surprising that I need to do this on a unbranded/unlocked device.... the x310e 's tethering is *still* locked by AT&T.../
does the top left of my device saying "Security Unlocked" mean anything special?
Click to expand...
Click to collapse
Honestly, I don't know. If you have successfully HSPL your deice and you're using a custom ROM, not a stock ROM, you should be good to go.
slpin said:
wow
you are right
no gold card, no nothing...
just flash it and it is all done now!
it is surprising that I need to do this on a unbranded/unlocked device.... the x310e 's tethering is *still* locked by AT&T.../
does the top left of my device saying "Security Unlocked" mean anything special?
Click to expand...
Click to collapse
I take it you're using that Titan inside US? If so, then you will need to have a tethering plan with ATT (as I understand with most US carriers, they make you pay to tether). Otherwise if you're on a custom ROM, you can follow the guide in the Titan development forum about unlocking the tether option with ATT.
end up having to do the registry hack to get tethering to work...
this is kind of crap seeing as it is an unbranded/unlocked device which is still affected by AT&T's tethering limitation.... for example, the Lumia 800 isn't faced with this issue. Perhaps it may be time to switch to tmobile soon..