Related
Hi,
I read up on the Omega v5.2 ROM and it looks very good. I just want to know from those who are already using it, how much better performance is it using the recommended version whcih I think is called the "Default" vs the stock firmware? It is that much smoother and better battery performance?
NocNoc9595 said:
Hi,
I read up on the Omega v5.2 ROM and it looks very good. I just want to know from those who are already using it, how much better performance is it using the recommended version whcih I think is called the "Default" vs the stock firmware? It is that much smoother and better battery performance?
Click to expand...
Click to collapse
No its far to early to be better by anything but a very small margin .
Battery performance is down to the user not the firmware .
jje
JJEgan said:
No its far to early to be better by anything but a very small margin .
Battery performance is down to the user not the firmware .
jje
Click to expand...
Click to collapse
Would you happen to know what apps are removed in the "Bloated Apps Removed version" of the ROM? I can't find the list of apps the developer removed.
NocNoc9595 said:
Would you happen to know what apps are removed in the "Bloated Apps Removed version" of the ROM? I can't find the list of apps the developer removed.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=26636429&postcount=166
Tried Omega 4.2 and 5.2 briefly. Both times it broke Navigon and the camera hung on me. Don't see any benefit of the Hyperx mod. 5.2 caused my phone to warm up noticably.
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
NocNoc9595 said:
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
Click to expand...
Click to collapse
Have you done ANY research in the main thread? I don't think so, as all of this is covered there, including instructions (theres even a video to walk you through it). Don't be lazy.
NocNoc9595 said:
So you wouldn't recommend 5.2? Also, if I do decide to flash it, do I need to do a full wipe in CWM before I flash it or can I just flash it from stock in CWM?
Click to expand...
Click to collapse
A full wipe is the recommend, because then you have a clean installation and you beware of strange failures.
An instruction how you should flash Omega ROM is in the development thread (4th post) --> Installation Guide
I don't know if your phone is rootet yet, if so skip the first step and start with booting in CWM recovery.
Had used Omega on my SGS II, now using Omega on SGS III since 3.0. Works great for me, no errors whatsoever.
Omega 5.2 is flawless ok but hyper x mod is useless. It creates noise in video recording. No need to use 30mbps bit rate but if in future 60fps recording come true it will be a charm!!
n70shan said:
Omega 5.2 is flawless ok but hyper x mod is useless. It creates noise in video recording. No need to use 30mbps bit rate but if in future 60fps recording come true it will be a charm!!
Click to expand...
Click to collapse
Do you know how to install the stock camera apk?
I downloaded the zip file from Omega files, extracted it,but I cannot install it.
saldawop said:
Do you know how to install the stock camera apk?
I downloaded the zip file from Omega files, extracted it,but I cannot install it.
Click to expand...
Click to collapse
You have to install it with CWM:
1. Reboot to Recovery (CWM-Menu)
2. Select the zip-File
3. Enjoy
Looking at the tutorial video where it shows Omega 3 being installed on a stock rom where it says "no wipe necessary"
Does the same apply to version 6 ? as my rom is stock & rooted, will all my apps/widgets be lost or recoverable with Titanium, this will be my first custom rom and its looking great, thanks for your patience
Shug69 said:
Tried Omega 4.2 and 5.2 briefly. Both times it broke Navigon and the camera hung on me. Don't see any benefit of the Hyperx mod. 5.2 caused my phone to warm up noticably.
Click to expand...
Click to collapse
i am running omega 5.2 and i assure you i dont have the problems you mentioned... did you do a full wipe install or you just flashed it without factory reset?
irishbogman said:
Looking at the tutorial video where it shows Omega 3 being installed on a stock rom where it says "no wipe necessary"
Does the same apply to version 6 ? as my rom is stock & rooted, will all my apps/widgets be lost or recoverable with Titanium, this will be my first custom rom and its looking great, thanks for your patience
Click to expand...
Click to collapse
As per all Omega no wipe necessary . Wipe only if you hit problems .
jje
Hey guys,
Please can u tell me if there is a solution to change/modify to your needs a custom Rom you're about to install on your rooted galaxy s2 ( 9100 ).
For example: I want to install CyanogenMod 10 Nightly build... , it's installed, next i install GAPPS (google apps).
Ok, after reboot everything is ok and working.
Now what i want to do is to replace a default CM(cyanogenmod) apps (SMS, Contact manager/Call manager) by those which were included in JB 4.1.2 (leaked version).
Is there any way to achieve it ?
Thanks in advance for any info and suggestions.
Check out Chameleon Rom...
Sent from the Matrix
Donnie Sins said:
Check out Chameleon Rom...
Sent from the Matrix
Click to expand...
Click to collapse
will do in a minute, i will give a feedback, thanks
ASPIRINEMAGA said:
will do in a minute, i will give a feedback, thanks
Click to expand...
Click to collapse
Nope, i watched Chameleon ROM Hybrid on youtube but you can see that he is using old sms app (green with smiley), instead of what i'am searching for (Messaging with orange/yellow envelope).
But what i mentioned is that he have TouchWiz launcher (Desktop), where u can create folders etc.. How can i port it to fresh installed CM10 ROM?
Any suggestions? thanks
I leave here the JB 4.1.2 Leak in a Deodexed version. (For testing)
- Don't use Preload.
- It's a complete ROM , not only app and framework.
- Busybox
DISCLAIMER 1:
I am not responsible in ANY way if this bricks your phone/ goes into bootloop. You, and YOU ONLY, is responsible for what happened to your phone.
To avoid problems with system size, the ROM don't have some apps like chaton or music_hub . If you need to install some of them you can install those after.
I removed some ringtones too.
Because that , is important to build a good preload version.
Installation:
Copy zip to SD Card
Download and install CWM 6.0.2.8
Do a Backup (You can use it to restore data if you want to wipe data/factoryreset in this step)
Format system from CWM to have a fresh installation.
Install zip from CWM
[Optional] wipe cache/dalvik-cache
If you don't format data or wipe data/factory reset, you will have your previous phone but deodexed.
Reboot
Download
Version 2.1 : 22/02/2013 : http://d-h.st/nVS To have root after flash the ROM, flash root.zip from Shaaan
Version 2 : 19/02/2013 : http://d-h.st/OF8
Version 1 : http://d-h.st/2zE
Credits:
01. Shaaan: CWM and a lot of things
02. Frappeti Deodexed ROM in Galaxy Advance
03. Exelter : His deodexed ROM.
If you want to enable the Ripple Effect from Kirillos flash this zip:
http://d-h.st/UUr
Credits to Kirillos
cbolumar said:
I leave here the JB 4.1.2 Leak in a Deodexed version. (For testing)
- Don't use Preload.
- It's a complete ROM , not only data and framework.
- Busybox and root included.
Click to expand...
Click to collapse
-Complete ROM? can u specify that a little more than just (not only data and framework)
-Preload?
-What is the difference between this Rom and Estelter's one?
mojito0 said:
-Complete ROM? can u specify that a little more than just (not only app and framework)
-Preload?
-What is the difference between this Rom and Estelter's one?
Click to expand...
Click to collapse
This is a complete ROM : app, lib,etc,xbin,framework,.....build.prop,.. You have a new system and because that, you can use it as base to build a custom ROM.
Estelter change the app and framework directories to deodex apps and jars but you need flash the others system directories with odin before.
Preload is a specific area Sansung use like a extension of the system partition. In GB we don't use that area. I remove some apps from /system/app and the system partition size is enough . I don't need at the moment the preload partition.
Can I flash this zip from GB??
loof13 said:
Can I flash this zip from GB??
Click to expand...
Click to collapse
Not. You must use Odin the first time because :
- You need to change the partitions map to JB
- Flash the JB modem, kernel, baseband, CSC, etc.
This ROM is a complete /system . It is the part of the ROM we change in the custom ROMS.
Maybe not the smartest question, but...
Can i change vold.stab and framework-res.apk inside your pack, so that i want to have both effect right after ROM installation (vold.stab already switched, so there could be some mess if i don't change it before flashing of the rom)?
judas1977 said:
Maybe not the smartest question, but...
Can i change vold.stab and framework-res.apk inside your pack, so that i want to have both effect right after ROM installation (vold.stab already switched, so there could be some mess if i don't change it before flashing of the rom)?
Click to expand...
Click to collapse
Yes , no problem.
What about flash counter ? It will rise up after flash ?
AW: [ROM] Deodexed XXMB2 without Preload
michal_ag said:
What about flash counter ? It will rise up after flash ?
Click to expand...
Click to collapse
It raise up if you use odin.
But you can reset counter
Sent from my GT-I8160 using xda app-developers app
michal_ag said:
What about flash counter ? It will rise up after flash ?[/QUOTE
Non because you use odin with stock ROM. After you flash this ROM using CWM. Your counter remain 0.
Click to expand...
Click to collapse
when you insert the headphones the sound is played outside speaker.. please fix this bug
Odp: [ROM] Deodexed XXMB2 without Preload
I confirm audio routing issue. I just thought that my phone is broken. Good to know that's rom's bug
Wysyłane z mojego GT-I8160 za pomocą Tapatalk 2
BUG Found: Video Recording does not work. I can take pictures though.
Version 2
I left version 2 in the first post. I think it resolve both bugs.
cbolumar said:
I left version 2 in the first post. I think it resolve both bugs.
Click to expand...
Click to collapse
yep the bugs are resolved but now the rom aren't rooted, and after flash the root by shaan supersu doesn't work.. are u any ideas?
slade9220 said:
yep the bugs are resolved but now the rom aren't rooted, and after flash the root by shaan supersu doesn't work.. are u any ideas?
Click to expand...
Click to collapse
OK , yesterday i didn't have time to fix it. I hope to fix it today.
R: [ROM] Deodexed XXMB2 without Preload
cbolumar said:
OK , yesterday i didn't have time to fix it. I hope to fix it today.
Click to expand...
Click to collapse
I ceck with adb and in the system/xbin the file 'su' is missing.. i hope this can help you, thanks for your work!
Inviato dal mio GT-I8160 con Tapatalk 2
Version 2.1 uploading . To have root flash the ROM and after flash the root.zip from Shaaan.
I had a lot of problems with the root access. I don't know the reason.
cbolumar said:
Version 2.1 uploading . To have root flash the ROM and after flash the root.zip from Shaaan.
I had a lot of problems with the root access. I don't know the reason.
Click to expand...
Click to collapse
check updater-script
cbolumar said:
Version 2.1 uploading . To have root flash the ROM and after flash the root.zip from Shaaan.
I had a lot of problems with the root access. I don't know the reason.
Click to expand...
Click to collapse
Put the root files in the rom. But you need to set the correct permissions if you want it to work.
Sent from my Galaxy Ace 2 i8160
My device is Galaxy S2 International. I have flashed my phone using the latest Omega Rom following the given instruction at their sight. Everything went OK except it is now stuck at signing to Google.
Please help
Thank you.
maybe u should try flashing a gapps zip? It should updaye all that google stuff
have you download the add ons for omega ROM?
eissenvale said:
have you download the add ons for omega ROM?
Click to expand...
Click to collapse
Thank you guys, It finally went smooth after clearing all the cache.
This is a completely 100% stock rom built from the P5220XXUAMJ8 base. It's in flashable zip format, but there is absolutely no tweaking done to this rom; its primary purpose is as a base for anyone wanting to build a mod rom for the P5220 LTE, as well as being there for anyone who wants to return stock without odin.
As it is 100% stock it's fully bloated, odexed, and non-rooted. You can attain root by flashing root.zip (not included in this post, but it's in the main forum) thus, if you have any complaints, bring them to Samsung, not me. Flashing instructions and download link below.
Edit: I've now also posted a deodexed + rooted build. See download link below. No other changes have been made to this version besides deodex/root.
Flashing instructions:
-Full wipe (factory reset in twrp)
-flash ROM
-reboot, let sit for about 10 minutes
-You're now 100% stock. Enjoy!
Download link:
100% stock
Rooted/Deodexed
Wow see your on a mission i know the community going to love this
Simply... THANKS!
Thanks a lot!
Do you know which version it is?
Thanks, friend & Greetz from Switzerland - Chris
Christoph21x said:
Thanks a lot!
Do you know which version it is?
Thanks, friend & Greetz from Switzerland - Chris
Click to expand...
Click to collapse
It's the stock P5220 4.2.2 rom, should work just fine for you
Dear Restl3ss
Could you pls. provide a mirror if possible? Mega is (currently?) not working with this file. (Screen remains endlessly stating "Starting")
And I use to have generally probs with Mega (also for pimpdroid )
Thanks for your work & Greetz - Chris
Christoph21x said:
Dear Restl3ss
Could you pls. provide a mirror if possible? Mega is (currently?) not working with this file. (Screen remains endlessly stating "Starting")
And I use to have generally probs with Mega (also for pimpdroid )
Thanks for your work & Greetz - Chris
Click to expand...
Click to collapse
Confirmed, download gets stuck on starting every time. Reuploading to mediafire, check back in a few
Christoph21x said:
Dear Restl3ss
Could you pls. provide a mirror if possible? Mega is (currently?) not working with this file. (Screen remains endlessly stating "Starting")
And I use to have generally probs with Mega (also for pimpdroid )
Thanks for your work & Greetz - Chris
Click to expand...
Click to collapse
reuploaded to mediafire link should work just fine now
just posted a deodexed / rooted build as well. No other changes have been made to this version
Restl3ss said:
just posted a deodexed / rooted build as well. No other changes have been made to this version
Click to expand...
Click to collapse
You're ... GREAT! Thanks a lot....
hello, I understand that I can install this rom to samsung tablet p5220. well, but I do not understand how I can root and install a custom recovery (otherwise how do I install the rom?).
tanks
supermurena said:
hello, I understand that I can install this rom to samsung tablet p5220. well, but I do not understand how I can root and install a custom recovery (otherwise how do I install the rom?).
tanks
Click to expand...
Click to collapse
If you have a custom recovery you can install this ROM to boot up stock / stock rooted. If you're just looking to root and don't want to replace your entire ROM I have a root method with guide posted here.
thanks for your answer. I'll try as soon as possible. bye
Hi
After install the deodexed Version i nave many force closes after boot. Its not possible to use the tablet. I flashed the rom with twrp. Whats wrong ?
Thanks
Ceejay72 said:
Hi
After install the deodexed Version i nave many force closes after boot. Its not possible to use the tablet. I flashed the rom with twrp. Whats wrong ?
Thanks
Click to expand...
Click to collapse
Interesting.. Can anyone else verify?
Disregard this message.
i can't install the rom
it gives an error after 2 sec of trying
i tried cwm and twrp
so any ideas ?
thank you
Does?
Does that rooted deoexed support mhl
Good morning. I followed the guide in an absolute way, but when I press the "Reboot" button restarts the tablet and is part of recovery. please help me
Pbt1994 said:
Good morning. I followed the guide in an absolute way, but when I press the "Reboot" button restarts the tablet and is part of recovery. please help me
Click to expand...
Click to collapse
Hi Pbt
Sad to hear this. Although it doesn't help you in THIS question, but I'd recommend to switch to Android 6.0.1 Mashmallow following this link: http://forum.xda-developers.com/galaxy-tab-3/development-10/rom-cyanogenmod-13-0-t3342017
Don't mess around anymore with Android 4.2.2...
If you need help, I follow (as you see) both threads.
Kind greetz from Switzerland - Chris
Christoph21x said:
Hi Pbt
Sad to hear this. Although it doesn't help you in THIS question, but I'd recommend to switch to Android 6.0.1 Mashmallow following this link: http://forum.xda-developers.com/galaxy-tab-3/development-10/rom-cyanogenmod-13-0-t3342017
Don't mess around anymore with Android 4.2.2...
If you need help, I follow (as you see) both threads.
Kind greetz from Switzerland - Chris
Click to expand...
Click to collapse
the problem is that I come from the CM 13. I preferred to return to rom stock because it seemed that the CM13 lag too. I think I will try to install the original firmware with Odin