Related
If you ...
find a bug or problem on 2.2, post here
find a solution on how to fix the bug, post here
want to get help on how to fix the bug, post here
anything else, goes here
This thread are meant for bug/problem solution and reported bug list of 2.2 custom ROM which i will try to manage, so people are not posting same bug, and asking for same solution all over again in X10 Custom ROM AOSP thread.
Limitation
Cannot Mount via USB
2.2 Custom ROM put the SYSTEM partition on your phone memory and the DATA partition in your SD card. That is why you cannot dismount the SD card from Android to mount to your PC.
No App2SD
2.2 Custom ROM is still running on 2.1 Custom Kernel which not supporting this.
Bug list
#0001 - WiFi not working - Fixed on 2.2
#0002 - Random android.process.media force close - Fixed on 2.2
#0003 - Home button not working, and no Lock Screen - Fixed on 2.2
#0004 - Cannot install certain APK (Angry Bird)
#0005 - No radio, no network and flashing Home - New on 0.0.2
#0006 - ADB shell have SU access, but Titanium Backup cannot work - New on 0.0.2
#0007 - SD Card non-ascii folder show as ???
#0008 - Facebook Contact Sync not available
#0009 - CPU Governor set to performance by default
Solutions for bugs
#0001 - How to enable WiFi on 2.2 Custom ROM
1. Try to enable WiFi, of course it will not work.. just do it.
2. WiFi will goes off automatically
3. Run
Code:
adb shell /system/bin/wlan_tool
4. If the adb stucks, just press CTRL+C
5. Repeat step 4 until you crash the phone
6. After reboot, your WiFi will work.
or
Code:
adb shell killall servicemanager
Post Reference
#0002 - android.process.media FC solution
0.0.1 compiled with prefilled databases which invalid for your phone
Code:
adb shell
cd /data/data/com.android.providers.media/databases
rm *
reboot
or this will ensure no invalid data anymore but will remove fixes for bug #0003
Code:
adb shell
cd /data/
rm -r data
mkdir data
reboot
Post Reference
#0003 - Fix Home Button & Lock Screen
Download sqlite here
First pull the db file first.
Code:
adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
Then add value to its content
Code:
sqlite3.exe settings.db
sqlite> INSERT INTO "secure" VALUES(67,'device_provisioned','1');
sqlite> .exit
Then push back the db
Code:
adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
Then reboot.
Post Reference
#0004 - Solving installing APK problems
Currently the 2.2 Custom ROM does not support app2sd, and some APK may configure it self to be installed in sdcard.
So we force it to install on internal with code below
Code:
adb shell pm setInstallLocation 1
adb install -l com.rovio.angrybirds.apk
Post Reference
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
Post Reference
#0006 - Fixing SU access for Titanium Backup
Run this command
Code:
adb shell chmod 4755 /system/bin/su
Post Reference
#0007 - Fixing SD card mount command to show unicode letters
Modify your chargemon file so its enables utf8 for non ascii letter.
You need to do this on 2.1 ROM, not 2.2 ROM. The file is located in /system/bin
look for this
Code:
mount -t vfat -o rw,noatime,nodiratime /dev/block/mmcblk0p1 /sd
and change into this
Code:
mount -t vfat -o rw,noatime,nodiratime,utf8 /dev/block/mmcblk0p1 /sd
Notes:
You must use a Unix/Linux format capable text editor for this. Notepad will not work.
You can try ultraedit for it.
Post Reference
#0008 - Fix Facebook Sync
Download the ContactsProvider.apk here, then install to your Android using push command
Code:
adb push ContactsProvider.apk /system/app/ContactsProvider.apk
adb reboot
Post Reference
#0009 - Using SetCPU
By default is Performance, fast but wasting too much battery.
Use SetCPU and set to OnDemand.
Post Reference
2.2 Custom ROM FAQ
How and what happened if upgrade from 0.0.1 to 0.0.2?
Just copy data.img and system.img replacing your current one in FreeX10 folder.
This will replace all your 0.0.1 data, be sure to back up first with Titanium Backup
WiFi is running and connected, but cannot browser
This problem seems to be occurring on selected few.. You can set static IP to your android.
Go to Settings -> Wireless ... -> WiFi, then press menu button. From there you can se static IP
Is there a possibility of Timescape and Mediascape for 2.2 Custom ROM
The answer is yes, its possible.
I managed to install Mediascape.apk into 2.2 Custom ROM, but cannot run.
The reason it cannot run is because UX is using a lot of things in Framework-res.apk, images, layout, styles, and etc which cannot be copied directly from SE 2.1 into 2.2 AOSP. It requires someone to properly put all values, resolving conflicts inside Framework-res.apk before the UX can run, which will take months or at least weeks if someone dedicated his or her day job for it. Then after that we still need to deal with external files. So in conclusion, while it still possible, i don't think anyone will do it because of the time demanding process.
I want to help devs solving bugs, i found one but i don't know what actually happend.
While usb connected, from command prompt, type
Code:
adb logcat > logcat.txt
This will output a lot of debugging info into logcat.txt file, later if you find bug, you take a look inside the file.
See anything error or info related to the bug, and post here.. When writing the logcat.txt output, but them inside
Code:
brackets.
Do not post everything.. post few lines related to the bugs.
2.2 Custom ROM Testing Tools
Service Menu
WARNING: DO NOT INSTALL THIS UNLESS YOU DO DEVS, END USER DO NOT INSTALL
PURPOSE: MAYBE FOR TESTING DEVICE FEATURE, MIGHT BREAK SYSTEM APPS
Enable SE Service Menu for device testing. For devs only. You need to put adb stuff in the directory for install.bat to run.
Install framework
Code:
adb push permissions /system/etc/permissions
adb push lib /system/framework
adb reboot
Install applications
Code:
adb install app\bootinfo3.apk
adb install app\ServiceMenu2.apk
adb install app\com.laac.launcher.servicemenu.apk
Nice work. THis is handy
As i posted in the Main thread!
I think some of the force closes, (mainly acore and google framework) and the fact that the market crashes, come down to importing a vcard!
I imported vcard, get many force closes, market stops working, I clean install and don't install the vcard. Everything functions fine.
I do believe this is the reason!
Greeet ~~!! but can u tell me the seloution of this proplem :
i was run 2.2 001 ok ? then i back to to SE 2.1 to change old system.img & data.img by the new on FreeX10_alpha-release_0.0.2-UPDATE , ok ? then i reboot my phone into 2.2 , it run but like u make a refresh on computer ! evry 3 second !
thnx
Ahmed radi said:
Greeet ~~!! but can u tell me the seloution of this proplem :
i was run 2.2 001 ok ? then i back to to SE 2.1 to change old system.img & data.img by the new on FreeX10_alpha-release_0.0.2-UPDATE , ok ? then i reboot my phone into 2.2 , it run but like u make a refresh on computer ! evry 3 second !
thnx
Click to expand...
Click to collapse
Please read the main post!
sorry but no one answer me there
Thanks
Thanks for this ,hopefully a post like this is made for the 1st post on 2.1
http://forum.xda-developers.com/showpost.php?p=9134882&postcount=1
awesome thread, very helpful. Hopefully more people will read this rather than constantly posting the same bugs in the main thread.
Ahmed radi said:
sorry but no one answer me there
Click to expand...
Click to collapse
hey ahmed
grb el solution da
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
i think en da el 7l
bye
bsthost said:
hey ahmed
grb el solution da
#0005 - Fixing radio, wifi and home screen flashing problem
Run this command
Code:
adb shell killall servicemanager
i think en da el 7l
bye
Click to expand...
Click to collapse
i dont know how to use adb shell is there anythread for newbie user how to use adb ?
angry birds on my x10 is working well....i take it from a previous backup and restrored on 2.2 with mybackup pro
Please post to http://forum.xda-developers.com/showthread.php?t=835308&page=9999 thread instead.
We don't need to create two discussion thread.
i fixed the wifi and flashing problem and i have connected to wifi but i cant access internet or market any it seems i have connected to my modem netwok still cant access to internet any idea how to fix this?
17mayis said:
i fixed the wifi and flashing problem and i have connected to wifi but i cant access internet or market any it seems i have connected to my modem netwok still cant access to internet any idea how to fix this?
Click to expand...
Click to collapse
Code:
setprop ro.kernel.android.ndns 2
setprop net.eth0.dns1 8.8.8.8
setprop net.eth0.dns2 8.8.4.4
New crash this morning : i tried to connect my BT headphone after that i've activated BT => BT has desactivated itself then the phone reboots.
zephyrix said:
Code:
setprop ro.kernel.android.ndns 2
setprop net.eth0.dns1 8.8.8.8
setprop net.eth0.dns2 8.8.4.4
Click to expand...
Click to collapse
i appreciate your answer man if you could tell me how to do this ? through adb shell or something else?
17mayis said:
i dont know how to use adb shell is there anythread for newbie user how to use adb ?
Click to expand...
Click to collapse
Google is your friend!
i have flashPlayer10.1 problem it,s to slow when i play on any website any solution what might be ?
Blackberry DUN Bluetooth Tethering Guide
WARNING!! FOR EXPERTS ONLY! YOU'VE BEEN WARNED! THIS IS NOT A SIMPLE CLICK AND DONE. IT MAY FRUSTRATE YOU!
This may or may not work for you, don't be surprised if it doesn't. Also Tethering may or may not be supported by your carrier. Data Plan recommended! @@
Your Mobile carrier may charge tethering fees, Continue at your own risk!
I suggest you read the whole thing before you action, and also please bare with my english, as it is my 3rd language.
Tether via Terminal: (Thanks lophyte for this great guide)
http://forum.cyanogenmod.com/topic/...-gtab-to-your-blackberry-phone-via-bluetooth/
I did not develop any apps or any scripts of any kind.
This was all done with some extensive research and alot of Trial and Error.
But with the little information I found out there, I was able to find some pretty interesting things.
I found this app called Q5 DUN, which was designed for an Old Internet Tablet called the SmartQ5 and ran Android 1.5.....
Therefore support is very limited, and there was only 2 updates back in 2009.
Also, I will be quoting guides out there, but I will properly credit the author for their efforts & findings. (Mostly lophyte )
Also would like to Thank RimDroid helping me with the research.
Click to expand...
Click to collapse
What you need:
-ALOT OF PATIENCE!
- Rooted Android Tablet ( I'm using a HP TouchPad )
- Android 2.3.7 (Reported by nihjar that it works on ICS!!)
- Blackberry Mobile Device with DUN Profile. ( I'm using BB Bold 9700 with OS 6 installed ) *Other Mobile's may work, need further testing*
- Terminal app
- Root Explorer app
- Super User app
- Q5 Bluetooth Dial Up Network app by wsoft2002
- Berry4All Scripts
- Chat Binary compiled by lophyte (Originally compiled for GTab, but works on my HP Touchpad) or you can compile one, link in lophyte's guide. **NOTE**(Reported by nihjar that it works on ICS!!)
Currently there are two ways to tether BT:
Option 1: Using the Q5 Bluetooth Dial Up Network app and modifying the Build.prop <-- Easiest Method, but buggy! But once configured, works perfectly!
Option 2: Running terminal commands <-- Connecting Manually thru Linux commands.
We will be installing both options in this guide.
Click to expand...
Click to collapse
- Make sure DUN is enabled on your BB ( Search google for guides on this )
Step 1: Download and Install on Android
-Install Root Explorer (if you don't have it already)
-Install Terminal (if you don't have it already)
-Install Q5 DUN http://android.gval.biz/
Step 2: Download the following on your PC
Berry4All Scripts Here
Chat Binary compiled by lophyte to Tether with Gtab Link to his Guide Here
File
lophyte said:
Download the berry4all package and find the config for your provider.
Berry4all is a Linux bluetooth tethering package that contains various pppd configurations for mobile providers. If your provider is not available in this package, you'll need to Google around for a proper pppd config and chatscript to allow you to tether to your blackberry or other mobile phone.
Click to expand...
Click to collapse
-Create a new folder which you will be placing the following files to better manage them.
-Copy the Chat binary file into the new folder.
-Extract bbtether and find the 2 files in /conf/ that corresponds to your mobile network, and copy those 2 files into the new folder. In this guide I will be using Rogers as an example. In this case, rogers & rogers-chat
lophyte said:
Modify the configurations
I haven't looked at the configs for the other providers, but the Rogers config needed a little bit of modification. The following line in my ppp peer config file needed to be changed:
Click to expand...
Click to collapse
Step 3:Modify the configurations
-Open rogers in a text editor ( I recommend Notepad ++)
-Find the line
connect "/usr/sbin/chat -f conf/rogers-chat
Click to expand...
Click to collapse
& change this line to:
connect "/system/bin/chat -f /etc/ppp/chatscripts/rogers-chat"
Click to expand...
Click to collapse
*NOTE* Edit the rogers-chat to which ever mobile provider you are using
-Find the line with 'novj' and place a # in front of it. Or Delete it, which ever is fine.
Your File should look like this:
# Tested by Max Taranukha
115200
noipdefault
defaultroute
#nomultilink
ipcp-restart 7
ipcp-accept-local
ipcp-accept-remote
lcp-echo-interval 0
lcp-echo-failure 999
nopcomp
noaccomp
pap-timeout 20
pap-restart 20
lcp-restart 10
#noauth
crtscts
usepeerdns
nomagic
noccp
#novj
user wapuser
password wap
name wapuser
#debug debug debug
# does not exist in all pppd versions (osx)
#replacedefaultroute
connect "/system/bin/chat -f /etc/ppp/chatscripts/rogers-chat"
Click to expand...
Click to collapse
**NOTE** Change UserName & Password that matches your APN settings.**
-Save and Exit.
Step 4:Now its time to copy these files to our Routed Android Devices.
-You will need to use Root Explorer to copy these files to your device, or Adb Push. ( Lookup the forums for on how to )
-Copy chat binary into /system/bin/ overwrite if prompt.
-Copy your mobile config files into these folders respectively.
a) rogers-chat -> /etc/ppp/peers (create this folders if it doesn't exist)
b) rogers -> /etc/ppp/chatscripts (create this folder if it doesn't exist}
-Reboot Device
-Once rebooted, you will need to pair your mobile device to your android device. Delete the profiles if it already exist, & pair again. (BT is buggy)
-Keep Bluetooth On.
Now here comes the most frustrating part... connecting!
Step 5:Configuring Q5 DUN
The best and easiest way to find you DUN MAC and Channel is using Q5 IMO,
but you can also use Linux commands. ( Terminal Tether guide above )
-Make sure you turn on BT, as this app does not toggle the BT on.
-Use this guide by wsoft2002 to configure Q5http://android.gval.biz/Q5_Bluetooth_DUN_installations.php
-In the Dial-Up Script, this is where the rogers-chat come into play.
-Open rogers-chat (your provider) file in Text Editor via Root Explorer.
-Select all Text and Copy in the the Dial-Up Script.
Your Dial-Up should look like this:
TIMEOUT 10
ABORT 'BUSY'
ABORT 'NO ANSWER'
ABORT 'ERROR'
SAY 'Starting GPRS connect script\n'
'' 'BBT_OS'
'' 'ATZ'
SAY 'Setting APN\n'
OK 'AT+CGDCONT=1,"IP","internet.com"'
ABORT 'NO CARRIER'
SAY 'Dialing...\n'
OK 'ATD*99#'
CONNECT
# Without ~p it does NOT continue passed Connect !!
~p
Click to expand...
Click to collapse
*Note the "internet.com", this is where you put your mobile APN. ( Google search if your mobile is not in the bbtether folder ) or settings on your phone.
**Note that the 'ATD*99#' will differ depending on the carrier. You can try 'ATD*99***1#' if that doesn't work, (try to google 'your carrier' ATD)
***Thanks to Nijhar he found out that on Telus Network, ~p causes connection issues in Q5, so this may vary for you. (Trial and Error!)
****NEW**** Found * Another way to find you isp APN settings, using Blackberry Desktop Software, and plugging in the mobile device, you can browse all authorized BB carriers.
-Save Configuration & Hit connect to Test it out.
Allow the connection and checkmark 'Do not show again'
If you get 'PPP Connection is UP!' GREAT! Skip to Step 7.
-If you get 'PPP Failed to connect' then obviously it didn't work.
Now there are a few factors that causes PPP failed to connect.
a) Q5 not setup properly, I suggest you double check your settings.
b) Pairing problems, or Trust permissions. Re-Pairing might fix it.
c) Remove or Add ~p from the chat script.
d) Reboot both devices and try again.
e) Tether is not supported by your carrier.
f) Make sure Dial-Up Networking Service is enabled on your phone. in Bluetooth connections>paired devices>Touchpad (May vary depending on BB OS)
Step 6:Testing BT connection in Terminal
Q5 might not work for you, so Terminal will be your next Option.
-Open Terminal and type 'su' for super user rights.
-type the following '# rfcomm bind /dev/rfcomm0 <bluetooth MAC> <channel>'
-then type 'pppd /dev/rfcomm0 call rogers' <- change 'rogers' to your carrier.
-Look at your Blackberry 'Modem Mode Enabled' should appear if it connects.
-If it does not connect, please revise the guide and make sure you have done everything exactly up till now.
-'# killall pppd ' to end the connection
Step 7:Configuring DNS to Google's DNS or of your choise
-In Terminal
-Type 'su'
-Then 'setprop net.dns1 8.8.8.8'
-Next 'setprop net.dns2 8.8.4.4'
*You can put as much as dns4 if you like, but Google's DNS should work fine**
Step 8:Testing Internet Connection
-Browsing
-Youtube
-Facebook
-Apps & Games (Trial & Error)
Step 9:Modifying the build.prop to eliminate setprop net.dns on reboot.
-Add net.dns1=8.8.8.8 & net.dns2=8.8.4.4
Working:
-Browsing the Web
-Streaming Video/Music
-Downloading Files using Opera Browser(Perfect), or xwind downloader app(Not perfect, but will work with any browser). Or use share link to Opera browser to DL using 'Choose Browser app found on the Market' -NEW-
-GO Launcher EX works great! Weather widget, facebook, e-mail etc all works! <~ If you want a fully functional homescreens,widgets etc
-Rogers,Telus & Bell Networks
Not Working:
-Android Market (Browse-able, but can't download anything)
-Google Currents
-Kindle App ( can log-in, but can't browse new books )
-Weather Apps ( News & Weather Works tho )
-Games
-Essentially any apps that cannot detect BT as Internet Source. Unlike most apps keeps trying to connect regardless of the 'available network'.
Support:
And if all fails, you may post below, and tell me your problems.
-Please provide the following info:
a) Mobile model & OS version
b) Tablet model & OS version
c) Carrier
d) Brief Description of the problem.
Please do not complain if it does not work for your device. We're simply trying to help the Android community by giving them support on unsupported devices.
UPDATED 22/12/2011:
Brut.all said:
And you will have problems with Android Market and some other apps. Internet is configured at linux level, Android OS don't know about it, so if application asks: "Do we have internet connection?", Android replies: "No". Android Market will wait for connection even if there is one.
Click to expand...
Click to collapse
I guess there's no workaround? Can someone with some DUN or PAN knowledge, shed some light on us?
WIP:
-Add Other Carriers ( Fido, etc?) (Feedback needed from the community)
Credit goes to:
lophyte for this Terminal Tethering guide & Chat Binary.
http://forum.cyanogenmod.com/topic/37078-how-to-tether-your-gtab-to-your-blackberry-phone-via-bluetooth/
berry4all for the chat scripts. http://www.berry4all.com/
wsoft2002 for his Q5 DUN program. http://android.gval.biz/
Max Taranukha who's name is on the script.
Brut.all for his finding on why Market doesn't work.
RimDroid for helping with the research, and helping me understanding a little bit more about Linux Dial-Up Networking.
nijhar for testing and helping this project out.
Thank you all for the support.
Click to expand...
Click to collapse
I hope our community keeps growing and more new devices are supported as days passes by.
Merry X-Mas everybody!
Vampirexhunter
Please post a reply if this worked or failed for you.
Most appreciated.
Simply amazing!! Thank you very much. Was waiting for the ROM update on my BB that would include wireless hotspot. That hasn't happened
Running a Torch 9860 with my rooted Touchpad. Just followed your instructions. Except I did not modify the build.prop file yet. I can't believe how fast this is!
benven said:
Simply amazing!! Thank you very much. Was waiting for the ROM update on my BB that would include wireless hotspot. That hasn't happened
Running a Torch 9860 with my rooted Touchpad. Just followed your instructions. Except I did not modify the build.prop file yet. I can't believe how fast this is!
Click to expand...
Click to collapse
Awesome! Does downloading work for you? and are you using Q5 or Terminal way?
I am using Q5. I only tried the Market. And as you stated, can get there but cannot download apps. As soon as I shut down Q5 and started up wifi, the apps downloaded. I am going to try Google Maps and Navigation to see if they work.
One question...does it matter where you put the net.dns1=8.8.8.8 & net.dns2=8.8.4.4 line in build.prop?
Thanks again and Merry Christmas!
benven said:
I am using Q5. I only tried the Market. And as you stated, can get there but cannot download apps. As soon as I shut down Q5 and started up wifi, the apps downloaded. I am going to try Google Maps and Navigation to see if they work.
One question...does it matter where you put the net.dns1=8.8.8.8 & net.dns2=8.8.4.4 line in build.prop?
Thanks again and Merry Christmas!
Click to expand...
Click to collapse
anywhere works.
New Discovery:
Q5 DUN does not require the ppp files (rogers + rogers-chat)
It only requires the chat binary file /system/bin
So if you are not using the terminal way, you can safely delete those files without affecting Q5.
New Discovery 2:
Stock browser,Firefox Beta & Dolphin HD - all three can't download... lol
But...Using Opera Browser, I was able to download files!! Yay! I'm assuming this app does not rely on 'Connectivity Manager'. I'm so happy, as this is the only browser that worked out of 4!
New Findings! Check it Out!
Simply amazing!! 关注中！
Nice Guide Vamp.
Couldn't have done it better myself!
Tried the Amazon Silk Browser
This Browser rocks in terms of browsing speeds!!
Can't download with this browser.. bummer..
New Finding!
I found a Download manager that works with BT.
Xwind Downloader by JasonWong.
By using this DL manager, I can use any browser I want to browse, and use this manager to download!
Hello, I have a question. When you pair you BB to HP Touchpad, does your Bluetooth say paired but not connected? Is that ok, or do I need to fix it somehow for the Tethering to work? So far I'm not able to tether, so I was wondering if that was the problem.
Some info:
Hp Touchpad running cyanogenmod 7
Blackberry Torch 9800 with Rogers and data plan.
Thank you.
kryal said:
Hello, I have a question. When you pair you BB to HP Touchpad, does your Bluetooth say paired but not connected? Is that ok, or do I need to fix it somehow for the Tethering to work? So far I'm not able to tether, so I was wondering if that was the problem.
Some info:
Hp Touchpad running cyanogenmod 7
Blackberry Torch 9800 with Rogers and data plan.
Thank you.
Click to expand...
Click to collapse
Hi Kryal,
It's suppose to say paired but not connected, that's normal.
All I can say is follow my instructions very carefully.
Which method are you using? Terminal or Q5?
Also make sure Dial-Up Networking Service is enabled on your phone. in Bluetooth connections>paired devices>Touchpad
vampirexhunter said:
Hi Kryal,
It's suppose to say paired but not connected, that's normal.
All I can say is follow my instructions very carefully.
Which method are you using? Terminal or Q5?
Also make sure Dial-Up Networking Service is enabled on your phone. in Bluetooth connections>paired devices>Touchpad
Click to expand...
Click to collapse
Never mind I fixed it by following the guide closely YOU ARE THE BEST. Donated, you deserve it.
kryal said:
Never mind I fixed it by following the guide closely YOU ARE THE BEST. where do I donate to you guys?
Click to expand...
Click to collapse
Awesome! Glad it worked out for you.. Donate? lol Thanks, but no need.. Free! I did not developed any software, and it was mostly used information out on the net that I slapped together
Even Netflix works on this!!! The video is a bit choppy but I'm very surprised anyways.
kryal said:
Even Netflix works on this!!! The video is a bit choppy but I'm very surprised anyways.
Click to expand...
Click to collapse
Yea, I've been trying to speed up the connection, but very unsuccesful.. it seems to cap at ~1mbps.. and on usb i can get about 2.5mbps (Tether to PC)
Also Rogers network is slow.
cm7 3.5
Hi there, I need some help please, is my chatscripts or peers wrong??
Operator: Singtel
Country: Singapore
APN: internet
user:65ideas
password: <no password>
Blackberry bold 9650 OS 6(latest)
cm7 alpha 3.5
Code:
TIMEOUT 10
ABORT 'BUSY'
ABORT 'NO ANSWER'
ABORT 'ERROR'
ABORT "NO DIALTONE"
ABORT VOICE
ABORT RINGING
SAY 'Starting GPRS connect script\n'
'' 'BBT_OS'
OK 'ATZ'
OK 'AT+CGDCONT=1,"IP","internet"'
ABORT 'NO CARRIER'
SAY 'Dialing...'
OK 'ATD*99#'
CONNECT
Code:
# Tested by Max Taranukha
115200
noipdefault
defaultroute
#nomultilink
ipcp-restart 7
ipcp-accept-local
ipcp-accept-remote
lcp-echo-interval 0
lcp-echo-failure 999
nopcomp
noaccomp
pap-timeout 20
pap-restart 20
lcp-restart 10
#noauth
crtscts
usepeerdns
nomagic
noccp
#novj
user "65ideas"
password ""
name Internet
#debug debug debug
# does not exist in all pppd versions (osx)
#replacedefaultroute
connect "/system/bin/chat -f /etc/ppp/chatscripts/singtel-chat"
tried with ~p or without ~p
Tried
user 65ideas
password ""
user 65ideas
password
jinnyroxs said:
Hi there, I need some help please, is my chatscripts or peers wrong??
Operator: Singtel
Country: Singapore
APN: internet
user:65ideas
password: <no password>
Blackberry bold 9650 OS 6(latest)
cm7 alpha 3.5
Code:
TIMEOUT 10
ABORT 'BUSY'
ABORT 'NO ANSWER'
ABORT 'ERROR'
ABORT "NO DIALTONE"
ABORT VOICE
ABORT RINGING
SAY 'Starting GPRS connect script\n'
'' 'BBT_OS'
OK 'ATZ'
OK 'AT+CGDCONT=1,"IP","internet"'
ABORT 'NO CARRIER'
SAY 'Dialing...'
OK 'ATD*99#'
CONNECT
Code:
# Tested by Max Taranukha
115200
noipdefault
defaultroute
#nomultilink
ipcp-restart 7
ipcp-accept-local
ipcp-accept-remote
lcp-echo-interval 0
lcp-echo-failure 999
nopcomp
noaccomp
pap-timeout 20
pap-restart 20
lcp-restart 10
#noauth
crtscts
usepeerdns
nomagic
noccp
#novj
user "65ideas"
password ""
name Internet
#debug debug debug
# does not exist in all pppd versions (osx)
#replacedefaultroute
connect "/system/bin/chat -f /etc/ppp/chatscripts/singtel-chat"
tried with ~p or without ~p
Tried
user 65ideas
password ""
user 65ideas
password
Click to expand...
Click to collapse
This setting might differ from carrier: 'ATD*99#'
This is the modem command to connect for Rogers.. you will have to find out which one works for you.
Try this one: 'ATD*99***1#'
If that doesn't work, you will need to test on your own, as I am only able to test Canadian carriers.
You can find other ATD commands online, if this one doesn't work.
This must be the most asked question I have googled in a long time
There are so many results but nothing that resolves my dilemma
Without any tweaks I can access channel 13 via the router with my Xperia Ray running the latest nightly CM10
So whats the issue you may be asking, well this is the strange part
If I turn off the SSID of the router so it no longer broadcasts its name then the issue starts
My mobile will not connect to channel 13 thereafter it just disconnects
HOWEVER I have no issues with channels 1 - 12 with the SSID turned off
and certainly had no issues with Miui v4 with the same kernel installed
I have seen this happen with a few tablets but once the tablet has seen the network on channel 13 it was fine and then I could turn off the SSID
SO why do I need to turn off the SSID - because I prefer it was off in an area high with WiFi activity that's all
and I need to use channel 13 because of the high volume of wifi traffic in the area constantly changing there channels
Wifi 13 seems more stable and quicker anyhow I am in the UK and the routers in our street are all set to auto channel???????!!! why I dont know, but none use channel 13
So is there a solution to this very bizarre issue or am I going to have to leave my SSID on
SOLUTION Found thanks sirkay
Thanks to sirkay I can now access any hidden non broadcasting SSID wifi network
http://forum.xda-developers.com/showpost.php?p=23564367&postcount=5
A simple script that is supposed to enable extra channels actually fixed my issue with a hidden SSID
-----------------------------------------------------
Channel 13 issues
[ SOLUTION: To Enabled Wifi Channels 12-14 ]
1. using Root Explorer, goto /system/etc/init.d
2. open one of your init.d scripts, i suggest first in the list (Menu > Open in text editor)
3. paste line below
Code:
sqlite3 /data/data/com.android.providers.settings/databases/settings.db "INSERT INTO secure (name, value) VALUES ('wifi_country_code', 'JP');"
4. close and save
5. reboot
note: to enabled channel 12-13 just change "JP" to "EU" or "ES"
-------------------------------------------------------------------------------------------------------------------------------------------
I created a fresh file called 10wifi
and add these lines
#!/system/bin/sh
#
# Fix wifi channels 12 - 14
sqlite3 /data/data/com.android.providers.settings/databases/settings.db "INSERT INTO secure (name, value) VALUES ('wifi_country_code', 'EU');"
-------------------------------------------------------------------------------------------
I put the file into an install-able zip and added permissions to the update_script
set_perm(0, 0, 0777, "/system/xbin/10wifi");
NeilDownx said:
Thanks to sirkay I can now access any hidden non broadcasting SSID wifi network
http://forum.xda-developers.com/showpost.php?p=23564367&postcount=5
A simple script that is supposed to enable extra channels actually fixed my issue with a hidden SSID
-----------------------------------------------------
Channel 13 issues
[ SOLUTION: To Enabled Wifi Channels 12-14 ]
1. using Root Explorer, goto /system/etc/init.d
2. open one of your init.d scripts, i suggest first in the list (Menu > Open in text editor)
3. paste line below
Code:
sqlite3 /data/data/com.android.providers.settings/databases/settings.db "INSERT INTO secure (name, value) VALUES ('wifi_country_code', 'JP');"
4. close and save
5. reboot
note: to enabled channel 12-13 just change "JP" to "EU" or "ES"
-------------------------------------------------------------------------------------------------------------------------------------------
I created a fresh file called 10wifi
and add these lines
#!/system/bin/sh
#
# Fix wifi channels 12 - 14
sqlite3 /data/data/com.android.providers.settings/databases/settings.db "INSERT INTO secure (name, value) VALUES ('wifi_country_code', 'EU');"
-------------------------------------------------------------------------------------------
I put the file into an install-able zip and added permissions to the update_script
set_perm(0, 0, 0777, "/system/xbin/10wifi");
Click to expand...
Click to collapse
I copied the script and saw that actually in my settings.db the value wifi_country_code is correctly added, but my galaxy tab s with Blisspop rom still doesn't see the 13th channel...
someone can help me please?
tribio said:
I copied the script and saw that actually in my settings.db the value wifi_country_code is correctly added, but my galaxy tab s with Blisspop rom still doesn't see the 13th channel...
someone can help me please?
Click to expand...
Click to collapse
Have a look in your build.prop file and amend as below
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=13
now finally reboot and if it still fails you may need to change kernels......
I no longer have to bother with these settings as changing the kernel fixed my past issues
...Another solution
1. Turn off WiFi
2. Copy /data/misc/wifi/wpa_supplicant.conf to /sdcard
3. Rename /data/misc/wifi/wpa_supplicant.conf to /data/misc/wifi/wpa_supplicant.conf.old
4. Copy /sdcard/wpa_supplicant.conf to /data/misc/wifi
5. Edit /data/misc/wifi/wpa_supplicant.conf (using ES File Explorer) and remove the pmf=1 line
6. Save the file and make sure the permissions are appropriately set to rw-rw----, the owner is system and the group is wifi otherwise your WiFi will not turn on.
7. Reboot
8. Turn on WiFi
Found this solution on the CM12 errors list - lost of people having similar wifi issues
Tried to update build.prop and nothing change...
Opened wpa_supplicant.conf and there is not "pmf=1" written in the file..
I suppose I have to change kernels?
Thanks a lot for the help!!!
none of the above methods worked for me either
tribio said:
Tried to update build.prop and nothing change...
Opened wpa_supplicant.conf and there is not "pmf=1" written in the file..
I suppose I have to change kernels?
Thanks a lot for the help!!!
Click to expand...
Click to collapse
I seem to have the same problem. Did you resolve your issue? Thanks in advance.
nope!
working with CM12
tribio said:
nope!
Click to expand...
Click to collapse
I got fed up with this and decided to go all out and install Lollipop. I installed Installed Cyanogenmod (CM12) and then Temasek ROM port. I did this at home where the router is using a low channel number. I took the tablet to work and voila channel 13 was working. No need to mess with any wifi_country_codes. I am pretty sure it would work fine without the Temasek port. It might also have worked fine with CM10 or CM11. The disadvantage to this whole process is that I don't have the same spen functionality as stock. I'm still figuring out what apps to using for my "new" Note 10.1.
Hey there,
first I have to say - I'm new here - and yes, I have searched for my issue in this forum and elsewhere, but I didn't find a solution. So I decided to register here and ask you experts about helping me to fix my problem:
I'm on Epinters-Rom CM 10.1(Android 4.2) (26/08 Built) and having a problem with a fast GPS-Fix. Always when I use GPS the first time a day it lasts about 5-10Min to get a Sat-Fix. I have done some research about this problem and found this:
In a post on a german forum (I'm from Germany) for Defy Froyo and GPS bug I encountered that there are system files that contain specific configurations for GPS or direct downloading instructions of "ancillary data" (such as A-GPS Data). However, there are no configuration files with the name "location" in Epinters-Rom as they are mentioned in this thread, but I noticed a file in my system folder (system / ect / ) called "gps.config".
Doing more research about this file, I found a post here on XDA in epinters CM10.1 thread from August. Here is mentioned, that Epinters "gps.config" has no entry to an so called "NTP server. He made this entry and now the GPS fix is quick. I didnt really see that Epinter commented this, but a year before, Epinter said (at another Rom) that the NTP server entry is no longer necessary (without further explanation).
Then I remembered (coming from Neutrino-Rom) that Neutrino has had an "GPS-Addon" that was separate flashable - a fix for every single country. So I looked at the the GPS addon of Neutrino (Germany) and behold: When flashing this GPS addon it seems, that just the "gps.config" will be fixed with the following entry for Germany:
Code:
NTP_SERVER de.pool.ntp.org
NTP_SERVER = 0.de.pool.ntp.org
NTP_SERVER = 1.de.pool.ntp.org
NTP_SERVER = 2.de.pool.ntp.org
NTP_SERVER = 3.de.pool.ntp.org
NTP_SERVER = 0.europe.pool.ntp.org
NTP_SERVER = 1.europe.pool.ntp.org
NTP_SERVER = 2.europe.pool.ntp.org
NTP_SERVER = 3.europe.pool.ntp.org
XTRA_SERVER_1 = http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2 = http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3 = http://xtra3.gpsonextra.net/xtra.bin
# DEBUG LEVELS : 0 - none , 1 - Error , 2 - Warning , 3 - Info
# 4 - Debug , 5 - Verbose
DEBUG_LEVEL = 0
# Intermediate position report , 1 = enable , 0 = disable
INTERMEDIATE_POS = 0
# Accuracy threshold for intermediate positions
# Less accurate positions are ignored , 0 for passing all positions
ACCURACY_THRES = 0
# Report supl ref location as position , 1 = enable , 0 = disable
REPORT_POSITION_USE_SUPL_REFLOC = 1
# Wiper ( wifi positioning ), 1 = enable , 0 = disable
ENABLE_WIPER = 1
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# # # # # AGPS server settings # # # # #
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
# FOR SUPL SUPPORT , set the Following Following
SUPL_HOST = supl.google.com
SUPL_PORT = 7276
SUPL_NO_SECURE_PORT = 3425
SUPL_SECURE_PORT = 7275
SUPL_TLS_HOST = FQDN
SUPL_TLS_CERT = / etc / SuplRootCert
# FOR C2K PDE SUPPORT , set the Following Following
C2K_HOST = c2k.pde.com
C2K_PORT = 1234
CURRENT_CARRIER = common
DEFAULT_AGPS_ENABLE = TRUE
DEFAULT_SSL_ENABLE = FALSE
# TRUE for " User Plane " , FALSE for " Control Plane "
DEFAULT_USER_PLANE = TRUE
In comparison to that, Epinters "gps.config" is only:
Code:
XTRA_SERVER_1 http://xtra1.gpsonextra.net/xtra.bin
XTRA_SERVER_2 = http://xtra2.gpsonextra.net/xtra.bin
XTRA_SERVER_3 = http://xtra3.gpsonextra.net/xtra.bin
SUPL_HOST = supl.google.com
SUPL_PORT = 7276
Do you think I could risk simply replace the two files? Or is it better to flash the file of neutrino? Or to edit the file by Epinter right? Or at least nothing at all? I do not even want to fabricate a Brick ...
So you techies from this forum! Can you help me?
Thanks for reading this and sorry for my poor english... its not my native language!
Regards,
Asmaron
PS: The Germany.zip in the appendix contains the files that would be flashed with neutrinos Rom (including the "gps.config"). The other single "gps.config.zip" is that of Epinters Rom. Simply open it in Editor/TextEdit or similar programs and you can see the above entries.
asmaron said:
Hey there,
first I have to say - I'm new here - and yes, I have searched for my issue in this forum and elsewhere, but I didn't find a solution. So I decided to register here and ask you experts about helping me to fix my problem:
I'm on Epinters-Rom CM 10.1(Android 4.2) (26/08 Built) and having a problem with a fast GPS-Fix. Always when I use GPS the first time a day it lasts about 5-10Min to get a Sat-Fix. I have done some research about this problem and found this:
In a post on a german forum (I'm from Germany) for Defy Froyo and GPS bug I encountered that there are system files that contain specific configurations for GPS or direct downloading instructions of "ancillary data" (such as A-GPS Data). However, there are no configuration files with the name "location" in Epinters-Rom as they are mentioned in this thread, but I noticed a file in my system folder (system / ect / ) called "gps.config".
Doing more research about this file, I found a post here on XDA in epinters CM10.1 thread from August. Here is mentioned, that Epinters "gps.config" has no entry to an so called "NTP server. He made this entry and now the GPS fix is quick. I didnt really see that Epinter commented this, but a year before, Epinter said (at another Rom) that the NTP server entry is no longer necessary (without further explanation).
Then I remembered (coming from Neutrino-Rom) that Neutrino has had an "GPS-Addon" that was separate flashable - a fix for every single country. So I looked at the the GPS addon of Neutrino (Germany) and behold: When flashing this GPS addon it seems, that just the "gps.config" will be fixed with the following entry for Germany:
Code:
Removed long code
Do you think I could risk simply replace the two files? Or is it better to flash the file of neutrino? Or to edit the file by Epinter right? Or at least nothing at all? I do not even want to fabricate a Brick ...
So you techies from this forum! Can you help me?
Thanks for reading this and sorry for my poor english... its not my native language!
Regards,
Asmaron
PS: The Germany.zip in the appendix contains the files that would be flashed with neutrinos Rom (including the "gps.config"). The other single "gps.config.zip" is that of Epinters Rom. Simply open it in Editor/TextEdit or similar programs and you can see the above entries.
Click to expand...
Click to collapse
For me, epinter's cm10.1 was the first time gps lock in in about 5 to 10 seconds, even if i was inside my house...
perhaps is better (previous backup) to edit the file and change the ntp servers to match your coutry's pools. then try,..
on cm7 i use an app called gps status to force calibration of the compass and to force inject fresh agps data, which helps a little
andresrivas said:
perhaps is better (previous backup) to edit the file and change the ntp servers to match your coutry's pools. then try,..
on cm7 i use an app called gps status to force calibration of the compass and to force inject fresh agps data, which helps a little
Click to expand...
Click to collapse
Hey!
Thanks for replying!
I use the GPS Status App too (and tried many other GPS Apps in market) and resetted agps-data many times an refreshed it. It helps a little but just for the moment and after one day not using GPS the fix lasts really long...
I would try to edit the "gps.conf" file but I use the Atrix as my main device, so I dont wanna brick it... Do you think, that editing this file will not force an brick? And what do you think is the best:
a) Editing Epinters "gps.conf" (of course after backing up the org. file, and everything else),
b) Exchange Epinters file with Neutrinos, or
c) Flashing Neutrinos "Germany.zip"?
Or even an absolute other solution?
Regards,
Asmaron
asmaron said:
Hey!
Thanks for replying!
I use the GPS Status App too (and tried many other GPS Apps in market) and resetted agps-data many times an refreshed it. It helps a little but just for the moment and after one day not using GPS the fix lasts really long...
I would try to edit the "gps.conf" file but I use the Atrix as my main device, so I dont wanna brick it... Do you think, that editing this file will not force an brick? And what do you think is the best:
a) Editing Epinters "gps.conf" (of course after backing up the org. file, and everything else),
b) Exchange Epinters file with Neutrinos, or
c) Flashing Neutrinos "Germany.zip"?
Or even an absolute other solution?
Regards,
Asmaron
Click to expand...
Click to collapse
Humm.. I edited the file and had no problems, I think edit is the safer option due to Neutrinos' files are for Gingerbread and we don't know what changed in the middle
andresrivas said:
Humm.. I edited the file and had no problems, I think edit is the safer option due to Neutrinos' files are for Gingerbread and we don't know what changed in the middle
Click to expand...
Click to collapse
Hmm... yeah thats true... so you have edited the file by yourself? What entries did you add? I thought Epinters settings worked for you?
asmaron said:
Hmm... yeah thats true... so you have edited the file by yourself? What entries did you add? I thought Epinters settings worked for you?
Click to expand...
Click to collapse
Sorry, that was on Gb, I edited the ntp servers to the ones off my country (Argentina). I was using root explorer at the time, but in cm10 the stock file manager can do it without problems (I used it to edit touchpad.cfg to fix raindrop bug). Only thing is you need to give it access via the app settings (can't remember as I'm back on cm7)
Hey!
Meanwhile I flashed the ROM from "Zn7mkUKzN1r8aCIV" where the flash is working. The fix lasts also very long and wasnt even stable. The entries of the "gps.conf" of "Zn7mkUKzN1r8aCIV" are exactly the same as the ones of epinter. So i tried to edit the "gps.conf":
- Editing the strings from the neutrino file (check OP), had the result that i didnt get a fix in even a half an hour.
- Restoring the "gps.conf" has the result of getting a fix after some minutes but not very stable.
- Now I have a edit of the "gps.conf" with the strings nlabrad mentioned in the post i told you before and the NTP-Server-Entries of Neutrino for germany (without blanks between the "="). Now i get a fix after some minutes that is stable, but the accuracy gets not better than 100 meters (328 feet). It stucks here and gets not better even after more than half an hour having a stable fix. To be exact it gets not better and not even worser. It stucks exactly at 100 meter accuracy.
Now i will test the GPS fix from that is mentioned here and i will report later!
Regards,
Asmaron
Did it!
Hey there!
I did it!
First it didn't work to exchange the "libnmea.so" from Krystian mentioned in the post above using the integrated file explorer. I allways got an Error when editing/copying/deleting the orig. "libnmea.so" in the "system/lib" folder. After that error somtimes GPS didn't work anymore at all (cant start it) or nothing was changed to the accuracy of the GPS. Well I have seen that by exchanging the file you have to set the permissions new (chmod 644) but I wasn't able to change it without getting an error.
So I tried another way: I extracted the Files of Zn7mkUKzN1r8aCIV's ROM and exchanged the "libnmea.so" org. file with the file from Krystian. I also replaced the "gps.conf" with an modified "gps.conf" containing the Neutrinos Strings from the Germany "gps.conf". Than I ziped and signed the modified files with LambOfGods Zip Signer Tool (v1.1) and flashed it (wiped Cache & Dalvik).
And now: Get a GPS-Fix (indoor) in about 45 sec with an accuracy of about 4 meters! YEAH! :victory:
Thanks for helping! Esp. thanks to you andresrivas and of course Zn7mkUKzN1r8aCIV and Krystian and so on!
Regards,
Asmaron
[/COLOR]
asmaron said:
Hey there!
I did it!
First it didn't work to exchange the "libnmea.so" from Krystian mentioned in the post above using the integrated file explorer. I allways got an Error when editing/copying/deleting the orig. "libnmea.so" in the "system/lib" folder. After that error somtimes GPS didn't work anymore at all (cant start it) or nothing was changed to the accuracy of the GPS. Well I have seen that by exchanging the file you have to set the permissions new (chmod 644) but I wasn't able to change it without getting an error.
So I tried another way: I extracted the Files of Zn7mkUKzN1r8aCIV's ROM and exchanged the "libnmea.so" org. file with the file from Krystian. I also replaced the "gps.conf" with an modified "gps.conf" containing the Neutrinos Strings from the Germany "gps.conf". Than I ziped and signed the modified files with LambOfGods Zip Signer Tool (v1.1) and flashed it (wiped Cache & Dalvik).
And now: Get a GPS-Fix (indoor) in about 45 sec with an accuracy of about 4 meters! YEAH! :victory:
Thanks for helping! Esp. thanks to you andresrivas and of course Zn7mkUKzN1r8aCIV and Krystian and so on!
Regards,
Asmaron
Click to expand...
Click to collapse
hI! I'm having hard time to understand exactly what you did to fix GPS accuracy. I'm the guy who asked Zn7mkUKzN1r8aCIV about the bug and I tried to overwrite the libnmea.so but it didn't work.... (I've had to flash again the rom to get back to 100m accuracy) Can you explain in a easier D) way how to fix it? I understand that you made a flashable zip maybe can you share it?
Hey there!
Well what I did exactly is:
1) Downloaded Zn7mkUKzN1r8aCIV's ROM (from 10/10/13) and extract it
2) Downloaded "libnmea.so" from Krystian
3) Replaced Zn7mkUKzN1r8aCIV's original "libnmea.so" in folder "system/lib/" with Krystian's one
4) Edited the "gps.conf" of Zn7mkUKzN1r8aCIV in folder "system/etc/" with the strings of Neutrinos "gps.conf" for germany (!) mentioned above *
5) Ziped and signatured the GPS-modified ROM files with "LambOfGods Zip Signer Tool (v1.1)" mentioned above
6) Wiped Cache & Dalvik - Flashed and GPS worked
I've uploaded my GPS-modified ROM with the german (!) "gps.conf" here:
Based on Zn7mkUKzN1r8aCIV's ROM 10/10/13 wich is based on Epinters ROM with modified GPS files for Germany from Krystian and Neutrino
Click to expand...
Click to collapse
with
a) "Standard"-Kernel:
CM10.1_Android4.2_GPSmodified.zip - 166.48 MB
b) "Hporch32-"Kernel (when Screen-Tearing occurs):
CM10.1_Android4.2.2_GPSmodified_hporch32.zip - 166.48 MB
I can't edit the "gps.conf" for every single county. Thats to much work. But you can do that on your own! I uploaded the files of Neutrionos "gps.conf"-Tweak here so you can download it and take the strings that you need for your country. In your case, I would do the following:
1) Download my GPS-modified ROM
2) Flash it, reboot and try out GPS - I will not take any responsibility for defects of your hardware! You flash it on your own risk!
2.a) If it works fast, its proofed that Neutrinos Strings in the "gps.conf" has no real effect - you can go to step 8
2.b) If it doesn't work (fast) you go to step 3
3. Download Neutrino GPS-Files and extract them
4. Choose the "gps.conf" that is related to your country (always stored in "system/etc/" folder of the zip-file of your country) and open it with editor
5. Edit the strings in the "gps.conf" on your Atrix (folder "system/etc/" - you will see, there are the german strings) with the ones of your country from the Neutrino File (make sure that there are no blanks between the " = " of each string**)
6. Save your edited "gps.conf" of the folder "system/etc" & check (imperative!) that the rights of the file are set on chmod 644!
7. Reboot and try out GPS
8. (Hopefully) Enjoy!
I hope it works! Looking forward to hear your report!
Regards,
Asmaron
* It is not proofed that this has any effect, but I think so, and now I have a GPS-Fix in almost a half minute.
** The effect of this is also not proofed! What I mean is type e.g.
Code:
NTP_SERVER=0.de.pool.ntp.org
instead of
Code:
NTP_SERVER = 0.de.pool.ntp.org
Hey! Did it work for you?
If not i have another suggestion:
Download my modified GPS-ROM, flash it (on your own risk), download the app "faster GPS" from playstore, choose your country settings in the app. It will modify the "gps.conf" and will set the NTP-Server settings for your country and region.
Maybe it helps... would be glad if you report here!
Regards,
Asmaron
libnmea.ko hack works on ICSROM (and related, I imagine)
asmaron said:
[...] Now i will test the GPS fix from that is mentioned here and i will report later!
Regards,
Asmaron
Click to expand...
Click to collapse
Came across this searching for a fix on my recent ICSROM update. I had to do the same thing when I first root/unlocked to install MROM, so that certainly helped. I noticed that the files sizes were identical, and not to the GB files, as one would expect. Anway, the issue manifested as GPS apps showing 0 accuracy, and WiFi-disabled Google Maps showing 1200m accuracy. After updating the file and chmod, it was showing ~7m accuracy.
Yup works a-ok...
jeremywh7 said:
[...] After updating the file and chmod, it was showing ~7m accuracy.
Click to expand...
Click to collapse
I meant '7ft accuracy' above. Anyway, I tested on my way to work this morn; locked at 5ft. I did see a couple times when it lost the lock and jumped around the map, but was brief. And I recall seeing that happen on the GB rom too.
Hey guys,
Can someone with a working Kenzo give me the folders that have something about wifi, bluetooth and radio?
maybe is something missing on my phone and wifi/bt doesn't turn on.
folders that i know have something about wifi:
/data/misc/wifi
/etc/wifi
/persist
/sys/devices/soc.0/a000000.qcom,wcnss-wlan
if anybody knows more folders please tell me, i appreciate it
hed190 said:
Hey guys,
Can someone with a working Kenzo give me the folders that have something about wifi, bluetooth and radio?
maybe is something missing on my phone and wifi/bt doesn't turn on.
folders that i know have something about wifi:
/data/misc/wifi
/etc/wifi
/persist
/sys/devices/soc.0/a000000.qcom,wcnss-wlan
if anybody knows more folders please tell me, i appreciate it
Click to expand...
Click to collapse
WiFi/BT will not work if these files are missing from 'persist' root folder:
Code:
WCNSS_qcom_wlan_nv.bin
.bt_nv.bin
Anyway, you can always check the log for error messages while you turn on WiFi/BT:
Code:
adb logcat -v time > log.txt
- end with ctrl-c
- to get the radio logs only: adb logcat -b radio
k23m said:
WiFi/BT will not work if these files are missing from 'persist' root folder:
Code:
WCNSS_qcom_wlan_nv.bin
.bt_nv.bin
Anyway, you can always check the log for error messages while you turn on WiFi/BT:
Code:
adb logcat -v time > log.txt
- end with ctrl-c
- to get the radio logs only: adb logcat -b radio
Click to expand...
Click to collapse
Hey, thanks for the reply.
I have those files there...
i created a thread with an entire logcat and asking for help but no one replied... it is frustating
Thanks