I know it's a WCDMA / GSM phone, do i follow instructions for GSM hero phones or CDMA Hero phones?
I checked the specs of Sprint CDMA and it doesn't have GSM on it so i guess i have to go with GSM instructions.
Can anyone confirm please...
The Telus Hero is a GSM Hero.
indeed.
Note that CDMA and WCDMA are not the same thing.
WCDMA is the 3G evolution of GSM, whereas CDMA is a joke
Thanks a lot!
What are the differences between the X10i and X10a? I know the Canadian version (x10a) has a different radio then the X10i (Europe).
This is the Only Differences I could find.
X10I......... GSM850, GSM900, GSM1800, GSM1900, UMTS900, UMTS1700, UMTS2100 .................... HSDPA 7.2 Mbit
X10A........ GSM850, GSM900, GSM1800, GSM1900, UMTS800, UMTS850, UMTS1900, UMTS2100 ...... HSDPA 10.2 Mbit
Is there else anything that might be different??
As far as i know, no.
Only the 3G frequency which is different in north america (well, only for some carriers).
Rogers, afaik is using 850 so you need X10a otherway no 3G
i think the HSDPA speeds are the same for both, the only difference is one of the 3G bands
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 900 / 1700 / 2100
HSDPA 850 / 1900 / 2100 - X10a for Americas
Is there a way to convert between the X10i and the X10a?
Please advise if there is a tutorial link or something.
Thank you for your help.
Regards L
You can't do that.. maybe if you change the Chip..
X10a has 800/850/1900/2100 WCDMA and quad band GSM/EDGE
X10i has 900/1700/2100 WCDMA and quad band GSM/EDGE
'a' uses QSD8650 processor 'i' uses QSD8250
800 WCDMA band if anyone wonders is for DoCoMo in Japan.
Hello. How can I identify which one I have?
Thanks!
Check label under battery
leobg said:
Check label under battery
Click to expand...
Click to collapse
...or check the box it came with. It should be written above the IMEI and serial # barcodes.
Service menu to look up model info
RSchmauk said:
Hello. How can I identify which one I have?
Click to expand...
Click to collapse
Or to bring up the service menu when the screen with the slider is up (screen locked),
Press Menu Back Back Menu Back Menu Menu Back
(Menu is the first button from the left, Back is the last)
It's under Service Info > Model Info
X10 in Canada
In this case, for the Canadian market, I believe the X10i is compatible with Wind Mobile (1700), while X10a is with Rogers/Fido/Chatr. Am I wrong?
you are correct, for HSPA rogers, bell, and telus are all on the 850 and use x10a
wind mobile has the same frequency as t-mobile USA so x10i would work. however wind mobile is only available in select very few markets
I have a X10i and can receive 3G on Rogers in Canada. On the side of my box it says UMTS/HSPA Band 1/2/5/6 (Along with the quad band GSM), can someone explain to me what the numbers mean?
odd ...
That's odd because I have a x10i and it says UMTS/HSPA 1/4/8
I also don't know what these numbers mean so basically have the same question.
Where did you get yours from? And are you sure it is a X10i and are you sure you have 3G? Does the data connection icon say "G" or "3G"? I'm asking because based on previous discussion, x10i is not supposed to work on Rogers so I'm very surprised.
Right underneath the bands mine says SV, DA, FI, NO which I believe stands for Sweden, Denmark, Finland, Norway as their localization codes.
It says 3G beside the signal bar, and here are picts of my service menu:
The service menu says I have an X10i
Here are the bands it supports, the service menu has the same band numbers as on my box:
Bought the phone used for the wife. So can anyone explain the band numbers?, as I am not familiar with SE phones, I have always used HTC
According to the UMTS bands table from wikipedia, those numbers mean 2100, 1900, 850, 800
I can't post the link because I'm a new user and the system doesn't allow me to post the links but if you wikipedia umts you'll find it.
I didn't know different x10i's could support different bands. I wonder if this means a different hardware as well or just a software change. Anyone?
I maybe wrong but I did read of people changing the firmware from the 10a to the 10i this will NOT change the radios.. simple way to check is to look under the battery label as the software can be changed.
kiru said:
It says 3G beside the signal bar, and here are picts of my service menu:
The service menu says I have an X10i
Here are the bands it supports, the service menu has the same band numbers as on my box:
Bought the phone used for the wife. So can anyone explain the band numbers?, as I am not familiar with SE phones, I have always used HTC
Click to expand...
Click to collapse
I used to have an Xperia X1a, and everytime i did flash a rom, my phone was always a x1i, but was fully functional, what i need to do was copy a simple modelname.txt file to the windows folder with x1a in it, and the phone became a x1a, i think that the model we get on the about screen is from some file on the rom, but what really defines the model is the hardware, not the sticker from behind.
my 2 cents
Etranger135 said:
According to the UMTS bands table from wikipedia, those numbers mean 2100, 1900, 850, 800
I can't post the link because I'm a new user and the system doesn't allow me to post the links but if you wikipedia umts you'll find it.
I didn't know different x10i's could support different bands. I wonder if this means a different hardware as well or just a software change. Anyone?
Click to expand...
Click to collapse
Thanks for the info! So does this mean that I really have an X10a that had been flashed? Sorry for the newbie questions, but this is the first time for me playing with an Andriod device. In my phone settings "About phone" is says:
Model Number - X10i
Firmware Version - 1.6 (I assume this is the Andriod version)
Baseband Version - 1.0.10
Kernal Version - 2.6.29-rel
Build Number - R1FA010
Is the build number the Andriod release number? ie. like windows mobile, there is wm6 with build 23xxx?
(I have never flashed the phone since I got it)
for changing from x10i to x10a and vice versa but there r a problem Flashing your Xperia X10i to X10a (and vice versa) will result in SEUS not being able to update your phone for future updates
sry am a new user so send me an email and i'll send u the link
[email protected]
I know telus used to be strictly cdma, however i know as of 2010 they have made some upgrades.
Does anyone know if unlocked phones such as this one:
(add http) cgi.ebay.com/MOTOROLA-DROID-MILESTONE-2-ANDROID-SMARTPHONE-UNLOCKED-/140483114173?pt=Cell_Phones&hash=item20b57234bd
would fully funcionall work on telus?
Just by looking at the supported bands it won't work on Telus or Bell. It will only work on Rogers but at EDGE speeds. The current supported bands by Telus and Bell are 3G only which are 850/1900 frequency. The only other provider in Canada which has a different one is Wind which is on the AWS 1700 frequency so T-Mobile 3G phones should work.
Telus and Bell Canada are not GSM because that refers to 2G which is a legacy network they do not have. They are 3G which all the 2G providers such as AT&T have upgraded to. Their CDMA network is still there running in parallel for now.
They use the exact same 3G system and frequencies as AT&T. So any AT&T 3G phone will also work on Bell or Telus. They do not have the legacy network so 2G phones will not work. Only 3G phones.
To put it another more technical way:
They support 3G UMTS/HSPA 850MHz and/or 1900MHz
They do NOT support 2G GSM/EDGE on any frequency